Skip to contentSkip to conversation

siemens,am33x: adjust mtd partition

PATCH Superseded Samuel Egli 4 participants 9 messages Jul 1, 2015 – Jul 10, 2015

lore
Share & tools
lore

Samuel Egli

author
#0 lore raw

PATCH 1/1 siemens,am33x: adjust mtd partition

Use one mtd partition for rootfs and configuration by means of ubi volumes and get rid of configuration partition. We can use partition layout for both 256MB and 512MB flash.

Signed-off-by Samuel Egli <[email protected]>
Cc Heiko Schocher <[email protected]>
Cc Roger Meier <[email protected]>
---
 include/configs/siemens-am33x-common.h |   33 ++++++++++++++++----------------
 1 file changed, 16 insertions(+), 17 deletions(-)
include/configs/siemens-am33x-common.h +16 -17
index 120647f..eddb868 100644
@@ -486,7 +486,7 @@
 
 /*
  * Variant 2 partition layout
- * chip-size = 256MiB
+ * chip-size = 256MiB or 512 MiB
  *|         name |        size |           address area |
  *-------------------------------------------------------
  *|          spl | 128.000 KiB | 0x       0..0x   1ffff |

@@ -496,23 +496,23 @@
  *|       u-boot |   1.875 MiB | 0x   80000..0x  25ffff |
  *|   uboot.env0 | 512.000 KiB | 0x  260000..0x  2Dffff |
  *|   uboot.env1 | 512.000 KiB | 0x  2E0000..0x  35ffff |
- *|       rootfs | 148.000 MiB | 0x  360000..0x 975ffff |
- *|      mtdoops | 512.000 KiB | 0x 9760000..0x 98Dffff |
- *|configuration | 104.125 MiB | 0x 97E0000..0x fffffff |
+ *|      mtdoops | 512.000 KiB | 0x  360000..0x  3dffff |
+ *| (256) rootfs | 252.125 MiB | 0x  3E0000..0x fffffff |
+ *| (512) rootfs | 508.125 MiB | 0x  3E0000..0x1fffffff |
  *-------------------------------------------------------
  */
 
 #define MTDPARTS_DEFAULT_V2	"mtdparts=" MTDIDS_NAME_STR ":" \
-					"128k(spl),"		\
-					"128k(spl.backup1),"	\
-					"128k(spl.backup2),"	\
-					"128k(spl.backup3),"	\
-					"1920k(u-boot),"	\
-					"512k(u-boot.env0),"	\
-					"512k(u-boot.env1),"	\
-					"148m(rootfs),"		\
-					"512k(mtdoops),"	\
-					"-(configuration)"
+					"128k(spl)," \
+					"128k(spl.backup1)," \
+					"128k(spl.backup2)," \
+					"128k(spl.backup3)," \
+					"1920k(u-boot)," \
+					"512k(u-boot.env0)," \
+					"512k(u-boot.env1)," \
+					"512k(mtdoops)," \
+					"-(rootfs)"
+
 
 #define DFU_ALT_INFO_NAND_V2 \
 	"spl part 0 1;" \

@@ -522,8 +522,7 @@
 	"u-boot part 0 5;" \
 	"u-boot.env0 part 0 6;" \
 	"u-boot.env1 part 0 7;" \
-	"rootfs partubi 0 8;" \
-	"configuration partubi 0 10"
+	"rootfs partubi 0 9" \
 
 #define CONFIG_ENV_SETTINGS_NAND_V2 \
 	"nand_active_ubi_vol=rootfs_a\0" \

@@ -540,7 +539,7 @@
 			"setenv nand_active_ubi_vol ${rootfs_name}_b;" \
 		"fi;" \
 		"setenv nand_root ubi0:${nand_active_ubi_vol} rw " \
-		"ubi.mtd=7,2048 ubi.mtd=9,2048;" \
+		"ubi.mtd=8,2048;" \
 		"setenv bootargs ${bootargs} " \
 		"root=${nand_root} noinitrd ${mtdparts} " \
 		"rootfstype=${nand_root_fs_type} ip=${ip_method} " \
Signature · 1 line
1.7.10.4
#1 lore raw

PATCH 1/1 siemens,am33x: adjust mtd partition

Thanks Sam!

Quoted 7 lines

-----Original Message-----
From: Samuel Egli [mailto:samuel.egli at siemens.com]
Sent: Mittwoch, 1. Juli 2015 11:05
To: u-boot at lists.denx.de
Cc: trini at konsulko.com; Egli, Samuel; Heiko Schocher; Meier, Roger
Subject: [PATCH] siemens,am33x: adjust mtd partition

Quoted 7 lines

Use one mtd partition for rootfs and configuration by means of ubi volumes and get rid of configuration partition. We can use partition layout for both 256MB and 512MB flash.

Signed-off-by Samuel Egli <[email protected]>
Cc Heiko Schocher <[email protected]>
Cc Roger Meier <[email protected]>
Reviewed-by Roger Meier <[email protected]>
#2 lore raw

PATCH 1/1 siemens,am33x: adjust mtd partition

In reply to Samuel Egli

Hallo Samuel,

Am 01.07.2015 um 11:04 schrieb Samuel Egli:

Quoted 10 lines

Use one mtd partition for rootfs and configuration by means of ubi volumes and get rid of configuration partition. We can use partition layout for both 256MB and 512MB flash.

Signed-off-by Samuel Egli <[email protected]>
Cc Heiko Schocher <[email protected]>
Cc Roger Meier <[email protected]>
---
  include/configs/siemens-am33x-common.h |   33 ++++++++++++++++----------------
  1 file changed, 16 insertions(+), 17 deletions(-)

only one nitpick ...

Quoted 36 lines
include/configs/siemens-am33x-common.h +4 -13
index 120647f..eddb868 100644
@@ -486,7 +486,7 @@
 
  /*
   * Variant 2 partition layout
- * chip-size = 256MiB
+ * chip-size = 256MiB or 512 MiB
   *|         name |        size |           address area |
   *-------------------------------------------------------
   *|          spl | 128.000 KiB | 0x       0..0x   1ffff |

@@ -496,23 +496,23 @@
   *|       u-boot |   1.875 MiB | 0x   80000..0x  25ffff |
   *|   uboot.env0 | 512.000 KiB | 0x  260000..0x  2Dffff |
   *|   uboot.env1 | 512.000 KiB | 0x  2E0000..0x  35ffff |
- *|       rootfs | 148.000 MiB | 0x  360000..0x 975ffff |
- *|      mtdoops | 512.000 KiB | 0x 9760000..0x 98Dffff |
- *|configuration | 104.125 MiB | 0x 97E0000..0x fffffff |
+ *|      mtdoops | 512.000 KiB | 0x  360000..0x  3dffff |
+ *| (256) rootfs | 252.125 MiB | 0x  3E0000..0x fffffff |
+ *| (512) rootfs | 508.125 MiB | 0x  3E0000..0x1fffffff |
   *-------------------------------------------------------
   */
 
  #define MTDPARTS_DEFAULT_V2	"mtdparts=" MTDIDS_NAME_STR ":" \
-					"128k(spl),"		\
-					"128k(spl.backup1),"	\
-					"128k(spl.backup2),"	\
-					"128k(spl.backup3),"	\
-					"1920k(u-boot),"	\
-					"512k(u-boot.env0),"	\
-					"512k(u-boot.env1),"	\
-					"148m(rootfs),"		\
-					"512k(mtdoops),"	\

include/configs/siemens-am33x-common.h line 514

Quoted 10 lines
include/configs/siemens-am33x-common.h +9 -1
-					"-(configuration)"
+					"128k(spl)," \
+					"128k(spl.backup1)," \
+					"128k(spl.backup2)," \
+					"128k(spl.backup3)," \
+					"1920k(u-boot)," \
+					"512k(u-boot.env0)," \
+					"512k(u-boot.env1)," \
+					"512k(mtdoops)," \
+					"-(rootfs)"

You name the partition "rootfs" .. but it contains not only the rootfs, instead it contains now 2 or more UBI volumes ...

Maybe a rename it to "ubi" or "ubivolumes" or ... makes this clearer? Beside of this, you can add my:

Acked-by Heiko Schocher <[email protected]>

bye,
Heiko

Quoted 24 lines
include/configs/siemens-am33x-common.h +3 -3
+
 
  #define DFU_ALT_INFO_NAND_V2 \
  	"spl part 0 1;" \

@@ -522,8 +522,7 @@
  	"u-boot part 0 5;" \
  	"u-boot.env0 part 0 6;" \
  	"u-boot.env1 part 0 7;" \
-	"rootfs partubi 0 8;" \
-	"configuration partubi 0 10"
+	"rootfs partubi 0 9" \
 
  #define CONFIG_ENV_SETTINGS_NAND_V2 \
  	"nand_active_ubi_vol=rootfs_a\0" \

@@ -540,7 +539,7 @@
  			"setenv nand_active_ubi_vol ${rootfs_name}_b;" \
  		"fi;" \
  		"setenv nand_root ubi0:${nand_active_ubi_vol} rw " \
-		"ubi.mtd=7,2048 ubi.mtd=9,2048;" \
+		"ubi.mtd=8,2048;" \
  		"setenv bootargs ${bootargs} " \
  		"root=${nand_root} noinitrd ${mtdparts} " \
  		"rootfstype=${nand_root_fs_type} ip=${ip_method} " \
Signature · 2 lines
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
#3 lore raw

PATCH 1/1 siemens,am33x: adjust mtd partition

Hi Heiko,

Quoted 66 lines

-----Original Message-----
From: Heiko Schocher denx [mailto:hs at denx.de]
Sent: Mittwoch, 1. Juli 2015 13:14
To: Egli, Samuel
Cc: u-boot at lists.denx.de; trini at konsulko.com; Meier, Roger
Subject: Re: [PATCH] siemens,am33x: adjust mtd partition

Hallo Samuel,

Am 01.07.2015 um 11:04 schrieb Samuel Egli:

Quoted 9 lines

Use one mtd partition for rootfs and configuration by means of ubi volumes and get rid of configuration partition.
We can use partition layout for both 256MB and 512MB flash.

Signed-off-by Samuel Egli <[email protected]>
Cc Heiko Schocher <[email protected]>
Cc Roger Meier <[email protected]>
---
  include/configs/siemens-am33x-common.h |   33 ++++++++++++++++------

----------

Quoted 1 line
  1 file changed, 16 insertions(+), 17 deletions(-)

only one nitpick ...

Quoted 42 lines
include/configs/siemens-am33x-common.h +8 -14
index 120647f..eddb868 100644
@@ -486,7 +486,7 @@
 
  /*
   * Variant 2 partition layout
- * chip-size = 256MiB
+ * chip-size = 256MiB or 512 MiB
   *|         name |        size |           address area |
   *-------------------------------------------------------
   *|          spl | 128.000 KiB | 0x       0..0x   1ffff |

@@ -496,23 +496,23 @@
   *|       u-boot |   1.875 MiB | 0x   80000..0x  25ffff |
   *|   uboot.env0 | 512.000 KiB | 0x  260000..0x  2Dffff |
   *|   uboot.env1 | 512.000 KiB | 0x  2E0000..0x  35ffff |
- *|       rootfs | 148.000 MiB | 0x  360000..0x 975ffff |
- *|      mtdoops | 512.000 KiB | 0x 9760000..0x 98Dffff |
- *|configuration | 104.125 MiB | 0x 97E0000..0x fffffff |
+ *|      mtdoops | 512.000 KiB | 0x  360000..0x  3dffff |
+ *| (256) rootfs | 252.125 MiB | 0x  3E0000..0x fffffff | *| (512)
+ rootfs | 508.125 MiB | 0x  3E0000..0x1fffffff |
   *-------------------------------------------------------
   */
 
  #define MTDPARTS_DEFAULT_V2	"mtdparts=" MTDIDS_NAME_STR ":" \
-					"128k(spl),"		\
-					"128k(spl.backup1),"	\
-					"128k(spl.backup2),"	\
-					"128k(spl.backup3),"	\
-					"1920k(u-boot),"	\
-					"512k(u-boot.env0),"	\
-					"512k(u-boot.env1),"	\
-					"148m(rootfs),"		\
-					"512k(mtdoops),"	\
-					"-(configuration)"
+					"128k(spl)," \
+					"128k(spl.backup1)," \
+					"128k(spl.backup2)," \
+					"128k(spl.backup3)," \
Quoted 9 lines

include/configs/siemens-am33x-common.h line 514

Quoted 5 lines
include/configs/siemens-am33x-common.h +5 -0
+					"1920k(u-boot)," \
+					"512k(u-boot.env0)," \
+					"512k(u-boot.env1)," \
+					"512k(mtdoops)," \
+					"-(rootfs)"

You name the partition "rootfs" .. but it contains not only the rootfs, instead it contains now 2 or more UBI volumes ...

Yes this is true.

Quoted 2 lines

Maybe a rename it to "ubi" or "ubivolumes" or ... makes this clearer? Beside of this, you can add my:

I had a first draft with partition name "ubi" ;-). What made me switch back too rootfs:

* Minimal changes in xml descriptions and scripts (not part of U-Boot)
* DFU handles partitions with name "rootfs" differently, i.e. performs an erase for remaining blocks (although, I'm not sure if this is still true)

Quoted 17 lines
Acked-by Heiko Schocher <[email protected]>

bye,
Heiko

Quoted 12 lines
include/configs/siemens-am33x-common.h +2 -2
+
 
  #define DFU_ALT_INFO_NAND_V2 \
  	"spl part 0 1;" \

@@ -522,8 +522,7 @@
  	"u-boot part 0 5;" \
  	"u-boot.env0 part 0 6;" \
  	"u-boot.env1 part 0 7;" \
-	"rootfs partubi 0 8;" \
-	"configuration partubi 0 10"
+	"rootfs partubi 0 9" \
Quoted 16 lines

include/configs/siemens-am33x-common.h line 545

Quoted 12 lines
include/configs/siemens-am33x-common.h +1 -1
  #define CONFIG_ENV_SETTINGS_NAND_V2 \
  	"nand_active_ubi_vol=rootfs_a\0" \

@@ -540,7 +539,7 @@
  			"setenv nand_active_ubi_vol ${rootfs_name}_b;" \
  		"fi;" \
  		"setenv nand_root ubi0:${nand_active_ubi_vol} rw " \
-		"ubi.mtd=7,2048 ubi.mtd=9,2048;" \
+		"ubi.mtd=8,2048;" \
  		"setenv bootargs ${bootargs} " \
  		"root=${nand_root} noinitrd ${mtdparts} " \
  		"rootfstype=${nand_root_fs_type} ip=${ip_method} " \

--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

Sam

#4 lore raw

PATCH 1/1 siemens,am33x: adjust mtd partition

In reply to Samuel Egli
Quoted 7 lines · Samuel Egli

Use one mtd partition for rootfs and configuration by means of ubi volumes and get rid of configuration partition. We can use partition layout for both 256MB and 512MB flash.

Signed-off-by Samuel Egli <[email protected]>
Cc Heiko Schocher <[email protected]>
Cc Roger Meier <[email protected]>

[snip]

include/configs/siemens-am33x-common.h line 542

Quoted 6 lines
include/configs/siemens-am33x-common.h +1 -1
@@ -540,7 +539,7 @@
 			"setenv nand_active_ubi_vol ${rootfs_name}_b;" \
 		"fi;" \
 		"setenv nand_root ubi0:${nand_active_ubi_vol} rw " \
-		"ubi.mtd=7,2048 ubi.mtd=9,2048;" \
+		"ubi.mtd=8,2048;" \

The kernel also accepts partition names here instead of numbers making this more future-proof.

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150701/4983e3eb/attachment.sig>
author
#5 lore raw

PATCH v2 1/1 siemens,am33x: adjust mtd partition

In reply to Samuel Egli

Use one mtd partition for rootfs and configuration by means of ubi volumes and get rid of configuration partition. We can use partition layout for both 256MB and 512MB flash.

Signed-off-by Samuel Egli <[email protected]>
Cc Heiko Schocher <[email protected]>
Cc Roger Meier <[email protected]>

---
Changes for v2:
- Use partition name instead of number

 include/configs/siemens-am33x-common.h |   33 ++++++++++++++++----------------
 1 file changed, 16 insertions(+), 17 deletions(-)
include/configs/siemens-am33x-common.h +16 -17
index 35427db..b0d9243 100644
@@ -490,7 +490,7 @@
 
 /*
  * Variant 2 partition layout
- * chip-size = 256MiB
+ * chip-size = 256MiB or 512 MiB
  *|         name |        size |           address area |
  *-------------------------------------------------------
  *|          spl | 128.000 KiB | 0x       0..0x   1ffff |

@@ -500,23 +500,23 @@
  *|       u-boot |   1.875 MiB | 0x   80000..0x  25ffff |
  *|   uboot.env0 | 512.000 KiB | 0x  260000..0x  2Dffff |
  *|   uboot.env1 | 512.000 KiB | 0x  2E0000..0x  35ffff |
- *|       rootfs | 148.000 MiB | 0x  360000..0x 975ffff |
- *|      mtdoops | 512.000 KiB | 0x 9760000..0x 98Dffff |
- *|configuration | 104.125 MiB | 0x 97E0000..0x fffffff |
+ *|      mtdoops | 512.000 KiB | 0x  360000..0x  3dffff |
+ *| (256) rootfs | 252.125 MiB | 0x  3E0000..0x fffffff |
+ *| (512) rootfs | 508.125 MiB | 0x  3E0000..0x1fffffff |
  *-------------------------------------------------------
  */
 
 #define MTDPARTS_DEFAULT_V2	"mtdparts=" MTDIDS_NAME_STR ":" \
-					"128k(spl),"		\
-					"128k(spl.backup1),"	\
-					"128k(spl.backup2),"	\
-					"128k(spl.backup3),"	\
-					"1920k(u-boot),"	\
-					"512k(u-boot.env0),"	\
-					"512k(u-boot.env1),"	\
-					"148m(rootfs),"		\
-					"512k(mtdoops),"	\
-					"-(configuration)"
+					"128k(spl)," \
+					"128k(spl.backup1)," \
+					"128k(spl.backup2)," \
+					"128k(spl.backup3)," \
+					"1920k(u-boot)," \
+					"512k(u-boot.env0)," \
+					"512k(u-boot.env1)," \
+					"512k(mtdoops)," \
+					"-(rootfs)"
+
 
 #define DFU_ALT_INFO_NAND_V2 \
 	"spl part 0 1;" \

@@ -526,8 +526,7 @@
 	"u-boot part 0 5;" \
 	"u-boot.env0 part 0 6;" \
 	"u-boot.env1 part 0 7;" \
-	"rootfs partubi 0 8;" \
-	"configuration partubi 0 10"
+	"rootfs partubi 0 9" \
 
 #define CONFIG_ENV_SETTINGS_NAND_V2 \
 	"nand_active_ubi_vol=rootfs_a\0" \

@@ -544,7 +543,7 @@
 			"setenv nand_active_ubi_vol ${rootfs_name}_b;" \
 		"fi;" \
 		"setenv nand_root ubi0:${nand_active_ubi_vol} rw " \
-		"ubi.mtd=7,2048 ubi.mtd=9,2048;" \
+		"ubi.mtd=rootfs,2048;" \
 		"setenv bootargs ${bootargs} " \
 		"root=${nand_root} noinitrd ${mtdparts} " \
 		"rootfstype=${nand_root_fs_type} ip=${ip_method} " \

--
1.7.10.4

#6 lore raw

PATCH v2 1/1 siemens,am33x: adjust mtd partition

Quoted 7 lines · Samuel Egli

Use one mtd partition for rootfs and configuration by means of ubi volumes and get rid of configuration partition. We can use partition layout for both 256MB and 512MB flash.

Signed-off-by Samuel Egli <[email protected]>
Cc Heiko Schocher <[email protected]>
Cc Roger Meier <[email protected]>
Reviewed-by Tom Rini <[email protected]>
Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150701/55246f8a/attachment.sig>
#7 lore raw

PATCH v2 1/1 siemens,am33x: adjust mtd partition

In reply to Samuel Egli

Hello Samuel,

Am 01.07.2015 um 17:57 schrieb Samuel Egli:

Quoted 7 lines

Use one mtd partition for rootfs and configuration by means of ubi volumes and get rid of configuration partition. We can use partition layout for both 256MB and 512MB flash.

Signed-off-by Samuel Egli <[email protected]>
Cc Heiko Schocher <[email protected]>
Cc Roger Meier <[email protected]>
Quoted 6 lines

---
Changes for v2:
- Use partition name instead of number

  include/configs/siemens-am33x-common.h |   33 ++++++++++++++++----------------
  1 file changed, 16 insertions(+), 17 deletions(-)
Acked-by Heiko Schocher <[email protected]>

bye,
Heiko

Quoted 73 lines
include/configs/siemens-am33x-common.h +16 -18
index 35427db..b0d9243 100644
@@ -490,7 +490,7 @@
 
  /*
   * Variant 2 partition layout
- * chip-size = 256MiB
+ * chip-size = 256MiB or 512 MiB
   *|         name |        size |           address area |
   *-------------------------------------------------------
   *|          spl | 128.000 KiB | 0x       0..0x   1ffff |

@@ -500,23 +500,23 @@
   *|       u-boot |   1.875 MiB | 0x   80000..0x  25ffff |
   *|   uboot.env0 | 512.000 KiB | 0x  260000..0x  2Dffff |
   *|   uboot.env1 | 512.000 KiB | 0x  2E0000..0x  35ffff |
- *|       rootfs | 148.000 MiB | 0x  360000..0x 975ffff |
- *|      mtdoops | 512.000 KiB | 0x 9760000..0x 98Dffff |
- *|configuration | 104.125 MiB | 0x 97E0000..0x fffffff |
+ *|      mtdoops | 512.000 KiB | 0x  360000..0x  3dffff |
+ *| (256) rootfs | 252.125 MiB | 0x  3E0000..0x fffffff |
+ *| (512) rootfs | 508.125 MiB | 0x  3E0000..0x1fffffff |
   *-------------------------------------------------------
   */
 
  #define MTDPARTS_DEFAULT_V2	"mtdparts=" MTDIDS_NAME_STR ":" \
-					"128k(spl),"		\
-					"128k(spl.backup1),"	\
-					"128k(spl.backup2),"	\
-					"128k(spl.backup3),"	\
-					"1920k(u-boot),"	\
-					"512k(u-boot.env0),"	\
-					"512k(u-boot.env1),"	\
-					"148m(rootfs),"		\
-					"512k(mtdoops),"	\
-					"-(configuration)"
+					"128k(spl)," \
+					"128k(spl.backup1)," \
+					"128k(spl.backup2)," \
+					"128k(spl.backup3)," \
+					"1920k(u-boot)," \
+					"512k(u-boot.env0)," \
+					"512k(u-boot.env1)," \
+					"512k(mtdoops)," \
+					"-(rootfs)"
+
 
  #define DFU_ALT_INFO_NAND_V2 \
  	"spl part 0 1;" \

@@ -526,8 +526,7 @@
  	"u-boot part 0 5;" \
  	"u-boot.env0 part 0 6;" \
  	"u-boot.env1 part 0 7;" \
-	"rootfs partubi 0 8;" \
-	"configuration partubi 0 10"
+	"rootfs partubi 0 9" \
 
  #define CONFIG_ENV_SETTINGS_NAND_V2 \
  	"nand_active_ubi_vol=rootfs_a\0" \

@@ -544,7 +543,7 @@
  			"setenv nand_active_ubi_vol ${rootfs_name}_b;" \
  		"fi;" \
  		"setenv nand_root ubi0:${nand_active_ubi_vol} rw " \
-		"ubi.mtd=7,2048 ubi.mtd=9,2048;" \
+		"ubi.mtd=rootfs,2048;" \
  		"setenv bootargs ${bootargs} " \
  		"root=${nand_root} noinitrd ${mtdparts} " \
  		"rootfstype=${nand_root_fs_type} ip=${ip_method} " \
--

1.7.10.4

Signature · 2 lines
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
#8 lore raw

PATCH v2 1/1 siemens,am33x: adjust mtd partition

In reply to Samuel Egli
Quoted 9 lines · Samuel

Use one mtd partition for rootfs and configuration by means of ubi volumes and get rid of configuration partition. We can use partition layout for both 256MB and 512MB flash.

Signed-off-by Samuel Egli <[email protected]>
Cc Heiko Schocher <[email protected]>
Cc Roger Meier <[email protected]>
Reviewed-by Tom Rini <[email protected]>
Acked-by Heiko Schocher <[email protected]>

Applied to u-boot/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150710/45e8cf35/attachment.sig>