ARM: dts: add MCT property use-cp15-phys-counter for exynos5422-odroidxu3
Subsystems (2)
RFC PATCH 3/3 ARM: dts: add MCT property use-cp15-phys-counter for exynos5422-odroidxu3
Speedup MCT operation on odroid-xu3 dev board by using coprocessor 64-bit counter instead of reading same counter located in mmio region.
Tested on Odroid-xu3.
--- arch/arm/boot/dts/exynos5422-odroidxu3.dts | 4 ++++ 1 file changed, 4 insertions(+)
arch/arm/boot/dts/exynos5422-odroidxu3.dts +4 -0
@@ -18,6 +18,10 @@ compatible = "hardkernel,odroid-xu3", "samsung,exynos5800", "samsung,exynos5"; }; +&mct { + use-cp15-phys-counter; +}; + &i2c_0 { status = "okay";
Signature · 1 line
2.1.4
RFC PATCH 3/3 ARM: dts: add MCT property use-cp15-phys-counter for exynos5422-odroidxu3
Quoted 9 lines · Alexey Klimov
Speedup MCT operation on odroid-xu3 dev board by using coprocessor 64-bit counter instead of reading same counter located in mmio region.
Tested on Odroid-xu3.
Signed-off-by Alexey Klimov <[email protected]>--- arch/arm/boot/dts/exynos5422-odroidxu3.dts | 4 ++++
Please do this in Odroid XU3 common DTSI:arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
Quoted 7 lines
1 file changed, 4 insertions(+)arch/arm/boot/dts/exynos5422-odroidxu3.dts +0
-0
arch/arm/boot/dts/exynos5422-odroidxu3.dts line 24
Quoted 7 lines
arch/arm/boot/dts/exynos5422-odroidxu3.dts +4
-0@@ -18,6 +18,10 @@ compatible = "hardkernel,odroid-xu3", "samsung,exynos5800", "samsung,exynos5"; }; +&mct { + use-cp15-phys-counter; +}; +
Put the node in alphabetical position.
Best regards,
Krzysztof
Quoted 4 lines
arch/arm/boot/dts/exynos5422-odroidxu3.dts +0
-0&i2c_0 { status = "okay";
RFC PATCH 3/3 ARM: dts: add MCT property use-cp15-phys-counter for exynos5422-odroidxu3
Hi Krzysztof,
Quoted 32 lines · Krzysztof Kozlowski
Quoted 9 lines · Alexey Klimov
Speedup MCT operation on odroid-xu3 dev board by using coprocessor 64-bit counter instead of reading same counter located in mmio region.
Tested on Odroid-xu3.
Signed-off-by Alexey Klimov <[email protected]>--- arch/arm/boot/dts/exynos5422-odroidxu3.dts | 4 ++++Please do this in Odroid XU3 common DTSI:
arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsiQuoted 7 lines
1 file changed, 4 insertions(+)arch/arm/boot/dts/exynos5422-odroidxu3.dts +0
-0arch/arm/boot/dts/exynos5422-odroidxu3.dts line 24
Quoted 7 lines
arch/arm/boot/dts/exynos5422-odroidxu3.dts +4
-0@@ -18,6 +18,10 @@ compatible = "hardkernel,odroid-xu3", "samsung,exynos5800", "samsung,exynos5"; }; +&mct { + use-cp15-phys-counter; +}; +Put the node in alphabetical position.
Quoted 2 lines
Best regards,
Krzysztof
Thanks. Will do it.
Signature · 1 line
Best regards, Klimov Alexey