board/p2020rdb: fix the FDT_ERR_NOTFOUND issue
PATCH v2 1/1 board/p2020rdb: fix the FDT_ERR_NOTFOUND issue
From: Ying Zhang <[email protected]>
Because the function ft_board_setup() delete the USB2 device node, it leads to can't find the device node and hung up.
In fact only P1020RDB needs to delete the USB2 node, this patch fixes this issue.
---
Change from v1:
- To define the parameter "err" to eliminate the compiling error.
board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-)
board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c +11 -4
@@ -428,8 +428,13 @@ int ft_board_setup(void *blob, bd_t *bd) {phys_addr_t base;phys_size_t size; +#if defined(CONFIG_P1020RDB_PD ) || defined(CONFIG_P1020RDB_PC )const char *soc_usb_compat ="fsl-usb2-dr" ; -int err, usb1_off, usb2_off; +int usb_err, usb1_off, usb2_off; +#endif +#if defined(CONFIG_SDCARD ) || defined(CONFIG_SPIFLASH ) +int err; +#endif ft_cpu_setup (blob, bd);
@@ -473,6 +478,7 @@ int ft_board_setup(void *blob, bd_t *bd) }#endif +#if defined(CONFIG_P1020RDB_PD ) || defined(CONFIG_P1020RDB_PC )/* Delete USB2 node as it is muxed with eLBC */ usb1_off =fdt_node_offset_by_compatible (blob,-1 , soc_usb_compat);
@@ -488,11 +494,12 @@ int ft_board_setup(void *blob, bd_t *bd) soc_usb_compat); return usb2_off; } - err =fdt_del_node (blob, usb2_off); -if (err <0 ) { + usb_err =fdt_del_node (blob, usb2_off); +if (usb_err <0 ) {printf ("WARNING: could not remove %s\n" , soc_usb_compat); -return err; +return usb_err; } +#endif return 0 ; }
Signature · 1 line
1.8.4.1
PATCH v2 1/1 board/p2020rdb: fix the FDT_ERR_NOTFOUND issue
Quoted 5 lines · ying.zhang at freescale.com
From: Ying Zhang <[email protected]>
Because the function
ft_board_setup()delete the USB2 device node, it leads to can't find the device node and hung up.
Quoted 8 lines
In fact only P1020RDB needs to delete the USB2 node, this patch fixes this issue.
Signed-off-by Ying Zhang <[email protected]>---
Change from v1:
- To define the parameter "err" to eliminate the compiling error.
Applied to u-boot-mpc85xx master.
Thanks.
York