ARM: dts: Convert Linkstation Mini to Device Tree
Subsystems (5)
PATCH v3 1/1 ARM: dts: Convert Linkstation Mini to Device Tree
The title says it all. The name of the dts file as been changed to better reflect the manufacturer's device name (LS-WSGL), rather than the original "lsmini", which exists in a kirkwood version too.
---
Since v2, I re-ordered the dts in the Makefile, and removed the makefile rule for the old .c file.
Thanks everyone for your support in guiding me to make the patch acceptable.
arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/orion5x-lswsgl.dts | 276 ++++++++++++++++++++++++++++++++++ arch/arm/mach-orion5x/Kconfig | 6 +- arch/arm/mach-orion5x/Makefile | 1 - arch/arm/mach-orion5x/lsmini-setup.c | 280 ----------------------------------- 5 files changed, 280 insertions(+), 284 deletions(-) create mode 100644 arch/arm/boot/dts/orion5x-lswsgl.dts delete mode 100644 arch/arm/mach-orion5x/lsmini-setup.c
arch/arm/boot/dts/Makefile +1 -0
@@ -440,6 +440,7 @@ dtb-$(CONFIG_SOC_DRA7XX) += \ dtb-$(CONFIG_ARCH_ORION5X) += \ orion5x-lacie-d2-network.dtb \ orion5x-lacie-ethernet-disk-mini-v2.dtb \ + orion5x-lswsgl.dtb \ orion5x-maxtor-shared-storage-2.dtb \ orion5x-rd88f5182-nas.dtb dtb-$(CONFIG_ARCH_PRIMA2) += \
arch/arm/boot/dts/orion5x-lswsgl.dts new file +276 -0
276 lines not on this page · raw message
arch/arm/mach-orion5x/Kconfig +3 -3
@@ -78,11 +78,11 @@ config MACH_LINKSTATION_LSCHL Buffalo Linkstation Live v3 (LS-CHL) platform. config MACH_LINKSTATION_MINI - bool "Buffalo Linkstation Mini" - select I2C_BOARDINFO + bool "Buffalo Linkstation Mini (Flattened Device Tree)" + select ARCH_ORION5X_DT help Say 'Y' here if you want your kernel to support the - Buffalo Linkstation Mini platform. + Buffalo Linkstation Mini (LS-WSGL) platform. config MACH_LINKSTATION_LS_HGL bool "Buffalo Linkstation LS-HGL"
arch/arm/mach-orion5x/Makefile +0 -1
@@ -4,7 +4,6 @@ obj-$(CONFIG_MACH_RD88F5182) += rd88f5182-setup.o obj-$(CONFIG_MACH_KUROBOX_PRO) += kurobox_pro-setup.o obj-$(CONFIG_MACH_TERASTATION_PRO2) += terastation_pro2-setup.o obj-$(CONFIG_MACH_LINKSTATION_PRO) += kurobox_pro-setup.o -obj-$(CONFIG_MACH_LINKSTATION_MINI) += lsmini-setup.o obj-$(CONFIG_MACH_LINKSTATION_LS_HGL) += ls_hgl-setup.o obj-$(CONFIG_MACH_DNS323) += dns323-setup.o obj-$(CONFIG_MACH_TS209) += ts209-setup.o tsx09-common.o
arch/arm/mach-orion5x/lsmini-setup.c deleted +0 -280
280 lines not on this page · raw message
Signature · 1 line
2.1.4
Andrew Lunn
maintainerPATCH v3 1/1 ARM: dts: Convert Linkstation Mini to Device Tree
Quoted 5 lines · Benjamin Cama
The title says it all. The name of the dts file as been changed to better reflect the manufacturer's device name (LS-WSGL), rather than the original "lsmini", which exists in a kirkwood version too.
Signed-off-by Benjamin Cama <[email protected]>
Hi Benjamin
It would be normal to add the various Acked-by: here, both Alexey and mine. It is not an issue, Gregory can add them, when he adds is own. I'm just mentioning it for any future patches you might submit.
Thanks for the good work converting this,
Andrew
PATCH v3 1/1 ARM: dts: Convert Linkstation Mini to Device Tree
Hi Andrew,
Le jeudi 06 ao?t 2015 ? 18:34 +0200, Andrew Lunn a ?crit :
Quoted 6 lines · Benjamin Cama
Quoted 5 lines
The title says it all. The name of the dts file as been changed to better reflect the manufacturer's device name (LS-WSGL), rather than
the original "lsmini", which exists in a kirkwood version too.
Quoted 7 lines
Quoted 1 line
Signed-off-by Benjamin Cama <[email protected]>Hi Benjamin
It would be normal to add the various Acked-by: here, both Alexey and mine. It is not an issue, Gregory can add them, when he adds is own. I'm just mentioning it for any future patches you might submit.
Ah, OK, I was not sure and didn't want to add them by mistake.
Quoted 1 line
Thanks for the good work converting this,
Thanks!
--
benjamin
PATCH v3 1/1 ARM: dts: Convert Linkstation Mini to Device Tree
Hi Benjamin,
Quoted 11 lines · Benjamin Cama
Hi Andrew,
Le jeudi 06 ao?t 2015 ? 18:34 +0200, Andrew Lunn a ?crit :
Quoted 8 lines · Benjamin Cama
Quoted 6 lines
The title says it all. The name of the dts file as been changed to better reflect the manufacturer's device name (LS-WSGL), rather than
the original "lsmini", which exists in a kirkwood version too.Signed-off-by Benjamin Cama <[email protected]>
Quoted 7 lines
Quoted 5 lines
Hi Benjamin
It would be normal to add the various Acked-by: here, both Alexey and mine. It is not an issue, Gregory can add them, when he adds is own. I'm just mentioning it for any future patches you might submit.
Ah, OK, I was not sure and didn't want to add them by mistake.
applied on mvebu/dt with the Acked-by: flags but also with some minor fixes :I used tab instead of space to indent dts at line 185 and I also resolved the merge conflict with patch "ARM: dts: orion5x: add buffalo linkstation ls-wtgl" in the file arch/arm/boot/dts/Makefile.
Thanks,
Gregory
Quoted 12 lines
Quoted 2 lines
Thanks for the good work converting this,
Thanks!
--
benjamin_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Signature · 4 lines
Gregory Clement, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com
PATCH v3 1/1 ARM: dts: Convert Linkstation Mini to Device Tree
Hi Gr?gory,
Le jeudi 06 ao?t 2015 ? 19:00 +0200, Gregory CLEMENT a ?crit :
Quoted 22 lines · Benjamin Cama
Quoted 21 lines
Hi Andrew,
Le jeudi 06 ao?t 2015 ? 18:34 +0200, Andrew Lunn a ?crit :
Quoted 17 lines · Benjamin Cama
Quoted 8 lines
The title says it all. The name of the dts file as been changed to
better reflect the manufacturer's device name (LS-WSGL), ratherthan
the original "lsmini", which exists in a kirkwood version too.Signed-off-by Benjamin Cama <[email protected]>Hi Benjamin
It would be normal to add the various Acked-by: here, both Alexey and
mine. It is not an issue, Gregory can add them, when he adds is own.
I'm just mentioning it for any future patches you might submit.
Quoted 4 lines
Quoted 1 line
Ah, OK, I was not sure and didn't want to add them by mistake.
applied on mvebu/dt with the Acked-by: flags but also with some minor fixes :I used tab instead of space to indent dts at line 185
Sorry, missed that.
Quoted 3 lines
and I
also resolved the merge conflict with patch "ARM: dts: orion5x: add buffalo linkstation ls-wtgl" in the filearch/arm/boot/dts/Makefile.
Thanks, I didn't rebase on master for some time?
Thanks again for your time,
--
benjamin
PATCH v3 1/1 ARM: dts: Convert Linkstation Mini to Device Tree
Hi Benjamin,
Quoted 25 lines · Benjamin Cama
Hi Gr?gory,
Le jeudi 06 ao?t 2015 ? 19:00 +0200, Gregory CLEMENT a ?crit :
Quoted 22 lines · Benjamin Cama
Quoted 21 lines
Hi Andrew,
Le jeudi 06 ao?t 2015 ? 18:34 +0200, Andrew Lunn a ?crit :
Quoted 17 lines · Benjamin Cama
Quoted 8 lines
The title says it all. The name of the dts file as been changed to
better reflect the manufacturer's device name (LS-WSGL), ratherthan
the original "lsmini", which exists in a kirkwood version too.Signed-off-by Benjamin Cama <[email protected]>Hi Benjamin
It would be normal to add the various Acked-by: here, both Alexey and
mine. It is not an issue, Gregory can add them, when he adds is own.
I'm just mentioning it for any future patches you might submit.
Quoted 6 lines
Quoted 4 lines
Quoted 1 line
Ah, OK, I was not sure and didn't want to add them by mistake.
applied on mvebu/dt with the Acked-by: flags but also with some minor fixes :I used tab instead of space to indent dts at line 185
Sorry, missed that.
No problem it was very minor, actually I didn't find myself, checpatch did it for me :)
Quoted 6 lines
Quoted 4 lines
and I
also resolved the merge conflict with patch "ARM: dts: orion5x: add buffalo linkstation ls-wtgl" in the filearch/arm/boot/dts/Makefile.Thanks, I didn't rebase on master for some time?
For this one you could not have do better, because the conflict comes from a commit in my mvebu/dt branch and when you send a patch we expect that it is based on the rc1. So it was really my job to do this.
Quoted 2 lines
Thanks again for your time,
You're welcome and thanks for your contributions,
Gregory
Signature · 4 lines
Gregory Clement, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com