PCI: hisi: Add PCIe host support for HiSilicon SoC Hip05
Subsystems (6)
v6 cover PCI: hisi: Add PCIe host support for HiSilicon SoC Hip05
This patchset adds PCIe host support for HiSilicon SoC Hip05. The PCIe hosts use PCIe IP core from Synopsys, So this driver is base on designware PCIe driver.
Hip05 is an ARMv8 architecture SoC. It should be able to use ARM64 PCIe API in designeware PCIe driver. So this patch also adds ARM64 support for designware pcie.
This patchset is based on v4.2-rc1.
Change from v5:
- Merge 1/6 in this series, discussion about this can be found in [1]
Change from v4:
- Change the author of 1/5 to Gabriele.
- Modify problems in 3/5 pointed by Bjorn.
- Modify spelling problems in 4/5.
Change from v3:
- Change 1/5 to what Gabriele suggested.
- Use win->__res.start to get *_mod_base in 2/5, this fix a bug in v3 series.
Change from v2:
- Move struct pci_dev *dev and struct pci_sys_data *sys in pcibios_align_resource in 1/5.
- Add Gabriele's codes in 2/5 which delete unnecessary information parse and use of_pci_get_host_bridge_resources for both ARM32 and ARM64.
- Add maintainer patch 5/5.
Change from RFC v1:
- Add 1/4 patch by Arnd which removes align_resource callback in ARM pcibios_align_resource.
- Change head file in pcie-designware from asm/hardirq.h to linux/hardirq.h.
- Set pp->root_bus_nr = 0 in dra7xx, exynos, imx6, keystone, layerscape, spear13xx.
- Remove unnecessary parentheses of some macros in pcie-hisi.
- Use macro to replace some magic values.
- Merge two loops together and add some comments about it in context_config function in pcie-hisi.
- Modify some value of items in pcie node example in binding document.
Change from RFC:
- delete dw_pcie_setup, dw_pcie_scan_bus, dw_pcie_map_irq and struct hw_pci, merge related operations into dw_pcie_host_init.
Link of v5:
- http://www.spinics.net/lists/devicetree/msg87959.html
Link of v4:
- http://www.spinics.net/lists/arm-kernel/msg433050.html
Link of v3:
- http://www.spinics.net/lists/linux-pci/msg42539.html
Link of v2:
- http://www.spinics.net/lists/linux-pci/msg41844.html
Link of RFC v1:
- http://www.spinics.net/lists/linux-pci/msg41305.html
Link of RFC:
- http://www.spinics.net/lists/linux-pci/msg40434.html
[1] http://lists.infradead.org/pipermail/linux-arm-kernel/2015-July/359741.html
Zhou Wang (4):
PCI: designware: Add ARM64 support
PCI: hisi: Add PCIe host support for HiSilicon SoC Hip05
Documentation: DT: Add HiSilicon PCIe host binding
MAINTAINERS: Add pcie-hisi maintainer
gabriele paoloni (2):
PCI: designware: move calculation of bus addresses to DRA7xx ARM/PCI: remove align_resource in pci_sys_data
.../devicetree/bindings/pci/hisilicon-pcie.txt | 46 ++++ MAINTAINERS | 7 + arch/arm/include/asm/mach/pci.h | 5 - arch/arm/kernel/bios32.c | 12 +- drivers/pci/host/Kconfig | 8 + drivers/pci/host/Makefile | 1 + drivers/pci/host/pci-dra7xx.c | 14 ++ drivers/pci/host/pci-exynos.c | 2 +- drivers/pci/host/pci-imx6.c | 2 +- drivers/pci/host/pci-keystone-dw.c | 2 +- drivers/pci/host/pci-keystone.c | 2 +- drivers/pci/host/pci-layerscape.c | 2 +- drivers/pci/host/pcie-designware.c | 236 ++++++------------- drivers/pci/host/pcie-designware.h | 14 +- drivers/pci/host/pcie-hisi.c | 254 +++++++++++++++++++++ drivers/pci/host/pcie-spear13xx.c | 2 +- 16 files changed, 425 insertions(+), 184 deletions(-) create mode 100644 Documentation/devicetree/bindings/pci/hisilicon-pcie.txt create mode 100644 drivers/pci/host/pcie-hisi.c
Signature · 1 line
1.9.1
PATCH v6 1/6 PCI: designware: move calculation of bus addresses to DRA7xx
From: gabriele paoloni <[email protected]>
Commit f4c55c5a3f7f "PCI: designware: Program ATU with untranslated address" added the calculation of PCI BUS addresses in designware, storing them in new fields added in "struct pcie_port". This calculation is done for every designware user even if is only applicable to DRA7xx.
This patch moves the calculation of the bus addresses to the DRA7xx driver and is needed to allow the rework of designware to use the new DT parsing API.
--- drivers/pci/host/pci-dra7xx.c | 13 +++++++++++++ drivers/pci/host/pcie-designware.c | 15 ++++----------- 2 files changed, 17 insertions(+), 11 deletions(-)
drivers/pci/host/pci-dra7xx.c +13 -0
@@ -61,6 +61,7 @@#define PCIECTRL_DRA7XX_CONF_PHY_CS 0x010C#define LINK_UP BIT(16) +#define CPU_TO_BUS_ADDR 0x0FFFFFFFstruct dra7xx_pcie {void __iomem *base;
@@ -139,6 +140,18 @@ static void dra7xx_pcie_enable_interrupts(struct pcie_port *pp)static void dra7xx_pcie_host_init (struct pcie_port *pp) {dw_pcie_setup_rc (pp); + +if (pp->io_mod_base) + pp->io_mod_base &=CPU_TO_BUS_ADDR ; + +if (pp->mem_mod_base) + pp->mem_mod_base &=CPU_TO_BUS_ADDR ; + +if (pp->cfg0_mod_base) { + pp->cfg0_mod_base &=CPU_TO_BUS_ADDR ; + pp->cfg1_mod_base &=CPU_TO_BUS_ADDR ; + } +dra7xx_pcie_establish_link (pp);if (IS_ENABLED (CONFIG_PCI_MSI ))dw_pcie_msi_init (pp);
drivers/pci/host/pcie-designware.c +4 -11
@@ -366,14 +366,10 @@ int dw_pcie_host_init(struct pcie_port *pp)struct of_pci_range range;struct of_pci_range_parser parser;struct resource *cfg_res; -u32 val, na, ns; +u32 val, ns;const __be32 *addrp;int i, index, ret; -/* Find the address cell size and the number of cells in order to get -* the untranslated address. -*/ -of_property_read_u32 (np,"#address-cells" , &na); ns =of_n_size_cells (np); cfg_res =platform_get_resource_byname (pdev,IORESOURCE_MEM ,"config" );
@@ -416,8 +412,7 @@ int dw_pcie_host_init(struct pcie_port *pp) pp->io_base = range.cpu_addr;/* Find the untranslated IO space address */ - pp->io_mod_base =of_read_number (parser.range - - parser.np + na, ns); + pp->io_mod_base = range.cpu_addr; }if (restype ==IORESOURCE_MEM ) {of_pci_range_to_resource (&range, np, &pp->mem);
@@ -426,8 +421,7 @@ int dw_pcie_host_init(struct pcie_port *pp) pp->mem_bus_addr = range.pci_addr;/* Find the untranslated MEM space address */ - pp->mem_mod_base =of_read_number (parser.range - - parser.np + na, ns); + pp->mem_mod_base = range.cpu_addr; }if (restype ==0 ) {of_pci_range_to_resource (&range, np, &pp->cfg);
@@ -437,8 +431,7 @@ int dw_pcie_host_init(struct pcie_port *pp) pp->cfg1_base = pp->cfg.start + pp->cfg0_size;/* Find the untranslated configuration space address */ - pp->cfg0_mod_base =of_read_number (parser.range - - parser.np + na, ns); + pp->cfg0_mod_base = range.cpu_addr; pp->cfg1_mod_base = pp->cfg0_mod_base + pp->cfg0_size; }
Signature · 1 line
1.9.1
PATCH v6 1/6 PCI: designware: move calculation of bus addresses to DRA7xx
[+cc jingoohan1 at gmail.com]
Quoted 100 lines · Zhou Wang
From: gabriele paoloni <[email protected]>
Commit
f4c55c5a3f7f"PCI: designware: Program ATU with untranslated address" added the calculation of PCI BUS addresses in designware, storing them in new fields added in "structpcie_port". This calculation is done for every designware user even if is only applicable to DRA7xx.
This patch moves the calculation of the bus addresses to the DRA7xx driver and is needed to allow the rework of designware to use the new DT parsing API.Signed-off-by Gabriele Paoloni <[email protected]>Signed-off-by Zhou Wang <[email protected]>--- drivers/pci/host/pci-dra7xx.c | 13 +++++++++++++ drivers/pci/host/pcie-designware.c | 15 ++++----------- 2 files changed, 17 insertions(+), 11 deletions(-)drivers/pci/host/pci-dra7xx.c +13
-0@@ -61,6 +61,7 @@#define PCIECTRL_DRA7XX_CONF_PHY_CS 0x010C#define LINK_UP BIT(16) +#define CPU_TO_BUS_ADDR 0x0FFFFFFFstruct dra7xx_pcie {void __iomem *base;@@ -139,6 +140,18 @@ static void dra7xx_pcie_enable_interrupts(struct pcie_port *pp)static void dra7xx_pcie_host_init (struct pcie_port *pp) {dw_pcie_setup_rc (pp); + +if (pp->io_mod_base) + pp->io_mod_base &=CPU_TO_BUS_ADDR ; + +if (pp->mem_mod_base) + pp->mem_mod_base &=CPU_TO_BUS_ADDR ; + +if (pp->cfg0_mod_base) { + pp->cfg0_mod_base &=CPU_TO_BUS_ADDR ; + pp->cfg1_mod_base &=CPU_TO_BUS_ADDR ; + } +dra7xx_pcie_establish_link (pp);if (IS_ENABLED (CONFIG_PCI_MSI ))dw_pcie_msi_init (pp);drivers/pci/host/pcie-designware.c +4
-11@@ -366,14 +366,10 @@ int dw_pcie_host_init(struct pcie_port *pp)struct of_pci_range range;struct of_pci_range_parser parser;struct resource *cfg_res; -u32 val, na, ns; +u32 val, ns;const __be32 *addrp;int i, index, ret; -/* Find the address cell size and the number of cells in order to get -* the untranslated address. -*/ -of_property_read_u32 (np,"#address-cells" , &na); ns =of_n_size_cells (np); cfg_res =platform_get_resource_byname (pdev,IORESOURCE_MEM ,"config" );@@ -416,8 +412,7 @@ int dw_pcie_host_init(struct pcie_port *pp) pp->io_base = range.cpu_addr;/* Find the untranslated IO space address */ - pp->io_mod_base =of_read_number (parser.range - - parser.np + na, ns); + pp->io_mod_base = range.cpu_addr; }if (restype ==IORESOURCE_MEM ) {of_pci_range_to_resource (&range, np, &pp->mem);@@ -426,8 +421,7 @@ int dw_pcie_host_init(struct pcie_port *pp) pp->mem_bus_addr = range.pci_addr;/* Find the untranslated MEM space address */ - pp->mem_mod_base =of_read_number (parser.range - - parser.np + na, ns); + pp->mem_mod_base = range.cpu_addr; }if (restype ==0 ) {of_pci_range_to_resource (&range, np, &pp->cfg);@@ -437,8 +431,7 @@ int dw_pcie_host_init(struct pcie_port *pp) pp->cfg1_base = pp->cfg.start + pp->cfg0_size;/* Find the untranslated configuration space address */ - pp->cfg0_mod_base =of_read_number (parser.range - - parser.np + na, ns); + pp->cfg0_mod_base = range.cpu_addr; pp->cfg1_mod_base = pp->cfg0_mod_base + pp->cfg0_size; }
PATCH v6 1/6 PCI: designware: move calculation of bus addresses to DRA7xx
In reply to Zhou Wang[+cc jingoohan1 at gmail.com]
Quoted 100 lines · Zhou Wang
From: gabriele paoloni <[email protected]>
Commit
f4c55c5a3f7f"PCI: designware: Program ATU with untranslated address" added the calculation of PCI BUS addresses in designware, storing them in new fields added in "structpcie_port". This calculation is done for every designware user even if is only applicable to DRA7xx.
This patch moves the calculation of the bus addresses to the DRA7xx driver and is needed to allow the rework of designware to use the new DT parsing API.Signed-off-by Gabriele Paoloni <[email protected]>Signed-off-by Zhou Wang <[email protected]>--- drivers/pci/host/pci-dra7xx.c | 13 +++++++++++++ drivers/pci/host/pcie-designware.c | 15 ++++----------- 2 files changed, 17 insertions(+), 11 deletions(-)drivers/pci/host/pci-dra7xx.c +13
-0@@ -61,6 +61,7 @@#define PCIECTRL_DRA7XX_CONF_PHY_CS 0x010C#define LINK_UP BIT(16) +#define CPU_TO_BUS_ADDR 0x0FFFFFFFstruct dra7xx_pcie {void __iomem *base;@@ -139,6 +140,18 @@ static void dra7xx_pcie_enable_interrupts(struct pcie_port *pp)static void dra7xx_pcie_host_init (struct pcie_port *pp) {dw_pcie_setup_rc (pp); + +if (pp->io_mod_base) + pp->io_mod_base &=CPU_TO_BUS_ADDR ; + +if (pp->mem_mod_base) + pp->mem_mod_base &=CPU_TO_BUS_ADDR ; + +if (pp->cfg0_mod_base) { + pp->cfg0_mod_base &=CPU_TO_BUS_ADDR ; + pp->cfg1_mod_base &=CPU_TO_BUS_ADDR ; + } +dra7xx_pcie_establish_link (pp);if (IS_ENABLED (CONFIG_PCI_MSI ))dw_pcie_msi_init (pp);drivers/pci/host/pcie-designware.c +4
-11@@ -366,14 +366,10 @@ int dw_pcie_host_init(struct pcie_port *pp)struct of_pci_range range;struct of_pci_range_parser parser;struct resource *cfg_res; -u32 val, na, ns; +u32 val, ns;const __be32 *addrp;int i, index, ret; -/* Find the address cell size and the number of cells in order to get -* the untranslated address. -*/ -of_property_read_u32 (np,"#address-cells" , &na); ns =of_n_size_cells (np); cfg_res =platform_get_resource_byname (pdev,IORESOURCE_MEM ,"config" );@@ -416,8 +412,7 @@ int dw_pcie_host_init(struct pcie_port *pp) pp->io_base = range.cpu_addr;/* Find the untranslated IO space address */ - pp->io_mod_base =of_read_number (parser.range - - parser.np + na, ns); + pp->io_mod_base = range.cpu_addr; }if (restype ==IORESOURCE_MEM ) {of_pci_range_to_resource (&range, np, &pp->mem);@@ -426,8 +421,7 @@ int dw_pcie_host_init(struct pcie_port *pp) pp->mem_bus_addr = range.pci_addr;/* Find the untranslated MEM space address */ - pp->mem_mod_base =of_read_number (parser.range - - parser.np + na, ns); + pp->mem_mod_base = range.cpu_addr; }if (restype ==0 ) {of_pci_range_to_resource (&range, np, &pp->cfg);@@ -437,8 +431,7 @@ int dw_pcie_host_init(struct pcie_port *pp) pp->cfg1_base = pp->cfg.start + pp->cfg0_size;/* Find the untranslated configuration space address */ - pp->cfg0_mod_base =of_read_number (parser.range - - parser.np + na, ns); + pp->cfg0_mod_base = range.cpu_addr; pp->cfg1_mod_base = pp->cfg0_mod_base + pp->cfg0_size; }
PATCH v6 1/6 PCI: designware: move calculation of bus addresses to DRA7xx
Quoted 16 lines · Zhou Wang
[+cc jingoohan1 at gmail.com]
Quoted 13 lines · Zhou Wang
From: gabriele paoloni <[email protected]>
Commit
f4c55c5a3f7f"PCI: designware: Program ATU with untranslated address" added the calculation of PCI BUS addresses in designware, storing them in new fields added in "structpcie_port". This calculation is done for every designware user even if is only applicable to DRA7xx.
This patch moves the calculation of the bus addresses to the DRA7xx driver and is needed to allow the rework of designware to use the new DT parsing API.Signed-off-by Gabriele Paoloni <[email protected]>Signed-off-by Zhou Wang <[email protected]>
Looks fine to me
PATCH v6 2/6 ARM/PCI: remove align_resource in pci_sys_data
In reply to Zhou WangFrom: gabriele paoloni <[email protected]>
This patch is needed in order to unify the PCIe designware framework for ARM and ARM64 architectures. In the PCIe designware unification process we are calling pci_create_root_bus() passing a "sysdata" parameter that is the same for both ARM and ARM64 and is of type "struct pcie_port*". In the ARM case this will cause a problem with the function pcibios_align_resource(); in fact this will cast "dev->sysdata" to "struct pci_sys_data*", whereas designware had passed a "struct pcie_port*" pointer.
This patch solves the issue by removing "align_resource" from "pci_sys_data" struct and defining a static global function pointer in "bios32.c"
--- arch/arm/include/asm/mach/pci.h | 5 ----- arch/arm/kernel/bios32.c | 12 ++++++++---- 2 files changed, 8 insertions(+), 9 deletions(-)
arch/arm/include/asm/mach/pci.h +0 -5
@@ -58,11 +58,6 @@ struct pci_sys_data {/* IRQ mapping */ int (*map_irq)(const struct pci_dev *,u8 ,u8 );/* Resource alignement requirements */ -resource_size_t (*align_resource)(struct pci_dev *dev, -const struct resource *res, -resource_size_t start, -resource_size_t size, -resource_size_t align);void *private_data;/* platform controller private data */ };
arch/arm/kernel/bios32.c +8 -4
@@ -17,6 +17,11 @@#include <asm/mach/pci.h> static int debug_pci; +static resource_size_t (*align_resource)(struct pci_dev *dev, +const struct resource *res, +resource_size_t start, +resource_size_t size, +resource_size_t align) =NULL ;#ifdef CONFIG_PCI_MSI struct msi_controller *pcibios_msi_controller (struct pci_dev *dev)
@@ -468,7 +473,7 @@ static void pcibios_init_hw(struct device *parent, struct hw_pci *hw, sys->busnr = busnr; sys->swizzle = hw->swizzle; sys->map_irq = hw->map_irq; - sys->align_resource = hw->align_resource; + align_resource = hw->align_resource;INIT_LIST_HEAD (&sys->resources);if (hw->private_data)
@@ -589,7 +594,6 @@ resource_size_t pcibios_align_resource(void *data, const struct resource *res, resource_size_t size, resource_size_t align) {struct pci_dev *dev = data; -struct pci_sys_data *sys = dev->sysdata;resource_size_t start = res->start;if (res->flags &IORESOURCE_IO && start &0x300 )
@@ -597,8 +601,8 @@ resource_size_t pcibios_align_resource(void *data, const struct resource *res, start = (start + align -1 ) & ~(align -1 ); -if (sys->align_resource) -return sys->align_resource (dev, res, start, size, align); +if (align_resource) +return align_resource (dev, res, start, size, align);return start; }
Signature · 1 line
1.9.1
PATCH v6 2/6 ARM/PCI: remove align_resource in pci_sys_data
[+cc jingoohan1 at gmail.com]
Quoted 80 lines · Zhou Wang
From: gabriele paoloni <[email protected]>
This patch is needed in order to unify the PCIe designware framework for ARM and ARM64 architectures. In the PCIe designware unification process we are calling
pci_create_root_bus()passing a "sysdata" parameter that is the same for both ARM and ARM64 and is of type "struct pcie_port*". In the ARM case this will cause a problem with the functionpcibios_align_resource(); in fact this will cast "dev->sysdata" to "struct pci_sys_data*", whereas designware had passed a "struct pcie_port*" pointer.This patch solves the issue by removing "
align_resource" from "pci_sys_data" struct and defining a static global function pointer in "bios32.c"Signed-off-by Gabriele Paoloni <[email protected]>--- arch/arm/include/asm/mach/pci.h | 5 ----- arch/arm/kernel/bios32.c | 12 ++++++++---- 2 files changed, 8 insertions(+), 9 deletions(-)arch/arm/include/asm/mach/pci.h +0
-5@@ -58,11 +58,6 @@ struct pci_sys_data {/* IRQ mapping */ int (*map_irq)(const struct pci_dev *,u8 ,u8 );/* Resource alignement requirements */ -resource_size_t (*align_resource)(struct pci_dev *dev, -const struct resource *res, -resource_size_t start, -resource_size_t size, -resource_size_t align);void *private_data;/* platform controller private data */ };arch/arm/kernel/bios32.c +8
-4@@ -17,6 +17,11 @@#include <asm/mach/pci.h> static int debug_pci; +static resource_size_t (*align_resource)(struct pci_dev *dev, +const struct resource *res, +resource_size_t start, +resource_size_t size, +resource_size_t align) =NULL ;#ifdef CONFIG_PCI_MSI struct msi_controller *pcibios_msi_controller (struct pci_dev *dev)@@ -468,7 +473,7 @@ static void pcibios_init_hw(struct device *parent, struct hw_pci *hw, sys->busnr = busnr; sys->swizzle = hw->swizzle; sys->map_irq = hw->map_irq; - sys->align_resource = hw->align_resource; + align_resource = hw->align_resource;INIT_LIST_HEAD (&sys->resources);if (hw->private_data)@@ -589,7 +594,6 @@ resource_size_t pcibios_align_resource(void *data, const struct resource *res, resource_size_t size, resource_size_t align) {struct pci_dev *dev = data; -struct pci_sys_data *sys = dev->sysdata;resource_size_t start = res->start;if (res->flags &IORESOURCE_IO && start &0x300 )@@ -597,8 +601,8 @@ resource_size_t pcibios_align_resource(void *data, const struct resource *res, start = (start + align -1 ) & ~(align -1 ); -if (sys->align_resource) -return sys->align_resource (dev, res, start, size, align); +if (align_resource) +return align_resource (dev, res, start, size, align);return start; }
PATCH v6 2/6 ARM/PCI: remove align_resource in pci_sys_data
Quoted 17 lines · Zhou Wang
[+cc jingoohan1 at gmail.com]
Quoted 14 lines · Zhou Wang
From: gabriele paoloni <[email protected]>
This patch is needed in order to unify the PCIe designware framework for ARM and ARM64 architectures. In the PCIe designware unification process we are calling
pci_create_root_bus()passing a "sysdata" parameter that is the same for both ARM and ARM64 and is of type "struct pcie_port*". In the ARM case this will cause a problem with the functionpcibios_align_resource(); in fact this will cast "dev->sysdata" to "struct pci_sys_data*", whereas designware had passed a "struct pcie_port*" pointer.This patch solves the issue by removing "
align_resource" from "pci_sys_data" struct and defining a static global function pointer in "bios32.c"Signed-off-by Gabriele Paoloni <[email protected]>
PATCH v6 3/6 PCI: designware: Add ARM64 support
In reply to Zhou WangThis patch tries to unify ARM32 and ARM64 PCIe in designware driver. Delete function dw_pcie_setup, dw_pcie_scan_bus, dw_pcie_map_irq and struct hw_pci, move related operations to dw_pcie_host_init.
In past, we use:pci_common_init_dev
-> pcibios_init_hw -> hw->scan (dw_pcie_scan_bus)
to pass 0 to root_bus_nr in struct pcie_port. This patch set pp->root_bus_nr = 0 in each PCIe host driver which is based on pcie-designware.
This patch also try to use of_pci_get_host_bridge_resources for ARM32 and ARM64 according to the suggestion for Gabriele[1]
Finally this patch reverts commit f4c55c5a3f7f "PCI: designware: Program ATU with untranslated address" based on 1/6 in this series. we delete *_mod_base in pcie-designware. This was discussed in [2]
I have compiled the driver with multi_v7_defconfig. However, I don't have ARM32 PCIe related board to do test. It will be appreciated if someone could help to test it.
[1] http://www.spinics.net/lists/linux-pci/msg42194.html
[2] http://www.spinics.net/lists/arm-kernel/msg436779.html
--- drivers/pci/host/pci-dra7xx.c | 15 +-- drivers/pci/host/pci-exynos.c | 2 +- drivers/pci/host/pci-imx6.c | 2 +- drivers/pci/host/pci-keystone-dw.c | 2 +- drivers/pci/host/pci-keystone.c | 2 +- drivers/pci/host/pci-layerscape.c | 2 +- drivers/pci/host/pcie-designware.c | 229 ++++++++++++------------------------- drivers/pci/host/pcie-designware.h | 14 +-- drivers/pci/host/pcie-spear13xx.c | 2 +- 9 files changed, 95 insertions(+), 175 deletions(-)
drivers/pci/host/pci-dra7xx.c +8 -7
@@ -141,15 +141,15 @@ static void dra7xx_pcie_host_init(struct pcie_port *pp) {dw_pcie_setup_rc (pp); -if (pp->io_mod_base) - pp->io_mod_base &=CPU_TO_BUS_ADDR ; +if (pp->io_base) + pp->io_base &=CPU_TO_BUS_ADDR ; -if (pp->mem_mod_base) - pp->mem_mod_base &=CPU_TO_BUS_ADDR ; +if (pp->mem_base) + pp->mem_base &=CPU_TO_BUS_ADDR ; -if (pp->cfg0_mod_base) { - pp->cfg0_mod_base &=CPU_TO_BUS_ADDR ; - pp->cfg1_mod_base &=CPU_TO_BUS_ADDR ; +if (pp->cfg0_base) { + pp->cfg0_base &=CPU_TO_BUS_ADDR ; + pp->cfg1_base &=CPU_TO_BUS_ADDR ; }dra7xx_pcie_establish_link (pp);
@@ -288,6 +288,7 @@ static int __init dra7xx_add_pcie_port(struct dra7xx_pcie *dra7xx, pp = &dra7xx->pp; pp->dev = dev; + pp->root_bus_nr =0 ; pp->ops = &dra7xx_pcie_host_ops; pp->irq =platform_get_irq (pdev,1 );
drivers/pci/host/pci-exynos.c +1 -1
@@ -530,7 +530,7 @@ static int __init exynos_add_pcie_port(struct pcie_port *pp, } } - pp->root_bus_nr =-1 ; + pp->root_bus_nr =0 ; pp->ops = &exynos_pcie_host_ops; ret =dw_pcie_host_init (pp);
drivers/pci/host/pci-imx6.c +1 -1
@@ -551,7 +551,7 @@ static int __init imx6_add_pcie_port(struct pcie_port *pp, } } - pp->root_bus_nr =-1 ; + pp->root_bus_nr =0 ; pp->ops = &imx6_pcie_host_ops; ret =dw_pcie_host_init (pp);
drivers/pci/host/pci-keystone-dw.c +1 -1
@@ -327,7 +327,7 @@ static void ks_dw_pcie_clear_dbi_mode(void __iomem *reg_virt)void ks_dw_pcie_setup_rc_app_regs (struct keystone_pcie *ks_pcie) {struct pcie_port *pp = &ks_pcie->pp; -u32 start = pp->mem.start, end = pp->mem.end; +u32 start = pp->mem->start, end = pp->mem->end;int i, tr_size;/* Disable BARs for inbound access */
drivers/pci/host/pci-keystone.c +1 -1
@@ -309,7 +309,7 @@ static int __init ks_add_pcie_port(struct keystone_pcie *ks_pcie,return ret; } - pp->root_bus_nr =-1 ; + pp->root_bus_nr =0 ; pp->ops = &keystone_pcie_host_ops; ret =ks_dw_pcie_host_init (ks_pcie, ks_pcie->msi_intc_np);if (ret) {
drivers/pci/host/pci-layerscape.c +1 -1
@@ -106,7 +106,7 @@ static int ls_add_pcie_port(struct ls_pcie *pcie) pp = &pcie->pp; pp->dev = pcie->dev; pp->dbi_base = pcie->dbi; - pp->root_bus_nr =-1 ; + pp->root_bus_nr =0 ; pp->ops = &ls_pcie_host_ops; ret =dw_pcie_host_init (pp);
drivers/pci/host/pcie-designware.c +76 -153
354 lines not on this page · raw message
drivers/pci/host/pcie-designware.h +5 -9
@@ -27,25 +27,21 @@ struct pcie_port {u8 root_bus_nr;void __iomem *dbi_base;u64 cfg0_base; -u64 cfg0_mod_base;void __iomem *va_cfg0_base;u32 cfg0_size;u64 cfg1_base; -u64 cfg1_mod_base;void __iomem *va_cfg1_base;u32 cfg1_size; -u64 io_base; -u64 io_mod_base; +resource_size_t io_base;phys_addr_t io_bus_addr;u32 io_size;u64 mem_base; -u64 mem_mod_base;phys_addr_t mem_bus_addr;u32 mem_size; -struct resource cfg; -struct resource io; -struct resource mem; -struct resource busn; +struct resource *cfg; +struct resource *io; +struct resource *mem; +struct resource *busn;int irq;u32 lanes;struct pcie_host_ops *ops;
drivers/pci/host/pcie-spear13xx.c +1 -1
@@ -286,7 +286,7 @@ static int spear13xx_add_pcie_port(struct pcie_port *pp,return ret; } - pp->root_bus_nr =-1 ; + pp->root_bus_nr =0 ; pp->ops = &spear13xx_pcie_host_ops; ret =dw_pcie_host_init (pp);
Signature · 1 line
1.9.1
PATCH v6 3/6 PCI: designware: Add ARM64 support
[+cc jingoohan1 at gmail.com]
Quoted 563 lines · Zhou Wang
This patch tries to unify ARM32 and ARM64 PCIe in designware driver. Delete function
dw_pcie_setup,dw_pcie_scan_bus,dw_pcie_map_irqand structhw_pci, move related operations todw_pcie_host_init.In past, we use:
pci_common_init_dev-> pcibios_init_hw -> hw->scan (dw_pcie_scan_bus)to pass 0 to
root_bus_nrin structpcie_port. This patch setpp->root_bus_nr= 0 in each PCIe host driver which is based on pcie-designware.This patch also try to use
of_pci_get_host_bridge_resourcesfor ARM32 and ARM64 according to the suggestion for Gabriele[1]Finally this patch reverts commit
f4c55c5a3f7f"PCI: designware: Program ATU with untranslated address" based on 1/6 in this series. we delete*_mod_basein pcie-designware. This was discussed in [2]I have compiled the driver with
multi_v7_defconfig. However, I don't have ARM32 PCIe related board to do test. It will be appreciated if someone could help to test it.Signed-off-by Zhou Wang <[email protected]>Signed-off-by Gabriele Paoloni <[email protected]>Signed-off-by Arnd Bergmann <[email protected]>[1] http://www.spinics.net/lists/linux-pci/msg42194.html
[2] http://www.spinics.net/lists/arm-kernel/msg436779.html--- drivers/pci/host/pci-dra7xx.c | 15 +-- drivers/pci/host/pci-exynos.c | 2 +- drivers/pci/host/pci-imx6.c | 2 +- drivers/pci/host/pci-keystone-dw.c | 2 +- drivers/pci/host/pci-keystone.c | 2 +- drivers/pci/host/pci-layerscape.c | 2 +- drivers/pci/host/pcie-designware.c | 229 ++++++++++++------------------------- drivers/pci/host/pcie-designware.h | 14 +-- drivers/pci/host/pcie-spear13xx.c | 2 +- 9 files changed, 95 insertions(+), 175 deletions(-)drivers/pci/host/pci-dra7xx.c +8
-7@@ -141,15 +141,15 @@ static void dra7xx_pcie_host_init(struct pcie_port *pp) {dw_pcie_setup_rc (pp); -if (pp->io_mod_base) - pp->io_mod_base &=CPU_TO_BUS_ADDR ; +if (pp->io_base) + pp->io_base &=CPU_TO_BUS_ADDR ; -if (pp->mem_mod_base) - pp->mem_mod_base &=CPU_TO_BUS_ADDR ; +if (pp->mem_base) + pp->mem_base &=CPU_TO_BUS_ADDR ; -if (pp->cfg0_mod_base) { - pp->cfg0_mod_base &=CPU_TO_BUS_ADDR ; - pp->cfg1_mod_base &=CPU_TO_BUS_ADDR ; +if (pp->cfg0_base) { + pp->cfg0_base &=CPU_TO_BUS_ADDR ; + pp->cfg1_base &=CPU_TO_BUS_ADDR ; }dra7xx_pcie_establish_link (pp);@@ -288,6 +288,7 @@ static int __init dra7xx_add_pcie_port(struct dra7xx_pcie *dra7xx, pp = &dra7xx->pp; pp->dev = dev; + pp->root_bus_nr =0 ; pp->ops = &dra7xx_pcie_host_ops; pp->irq =platform_get_irq (pdev,1 );drivers/pci/host/pci-exynos.c +1
-1@@ -530,7 +530,7 @@ static int __init exynos_add_pcie_port(struct pcie_port *pp, } } - pp->root_bus_nr =-1 ; + pp->root_bus_nr =0 ; pp->ops = &exynos_pcie_host_ops; ret =dw_pcie_host_init (pp);drivers/pci/host/pci-imx6.c +1
-1@@ -551,7 +551,7 @@ static int __init imx6_add_pcie_port(struct pcie_port *pp, } } - pp->root_bus_nr =-1 ; + pp->root_bus_nr =0 ; pp->ops = &imx6_pcie_host_ops; ret =dw_pcie_host_init (pp);drivers/pci/host/pci-keystone-dw.c +1
-1@@ -327,7 +327,7 @@ static void ks_dw_pcie_clear_dbi_mode(void __iomem *reg_virt)void ks_dw_pcie_setup_rc_app_regs (struct keystone_pcie *ks_pcie) {struct pcie_port *pp = &ks_pcie->pp; -u32 start = pp->mem.start, end = pp->mem.end; +u32 start = pp->mem->start, end = pp->mem->end;int i, tr_size;/* Disable BARs for inbound access */ drivers/pci/host/pci-keystone.c +1
-1@@ -309,7 +309,7 @@ static int __init ks_add_pcie_port(struct keystone_pcie *ks_pcie,return ret; } - pp->root_bus_nr =-1 ; + pp->root_bus_nr =0 ; pp->ops = &keystone_pcie_host_ops; ret =ks_dw_pcie_host_init (ks_pcie, ks_pcie->msi_intc_np);if (ret) {drivers/pci/host/pci-layerscape.c +1
-1@@ -106,7 +106,7 @@ static int ls_add_pcie_port(struct ls_pcie *pcie) pp = &pcie->pp; pp->dev = pcie->dev; pp->dbi_base = pcie->dbi; - pp->root_bus_nr =-1 ; + pp->root_bus_nr =0 ; pp->ops = &ls_pcie_host_ops; ret =dw_pcie_host_init (pp);drivers/pci/host/pcie-designware.c +76
-153@@ -11,6 +11,7 @@* published by the Free Software Foundation. */ +#include <linux/hardirq.h> #include <linux/irq.h> #include <linux/irqdomain.h> #include <linux/kernel.h> @@ -69,16 +70,7 @@#define PCIE_ATU_FUNC (x) (((x) & 0x7) << 16)#define PCIE_ATU_UPPER_TARGET 0x91C -static struct hw_pci dw_pci; - -static unsigned long global_io_offset; - -static inline struct pcie_port *sys_to_pcie (struct pci_sys_data *sys) -{ -BUG_ON (!sys->private_data); - -return sys->private_data; -} +static struct pci_ops dw_pcie_ops;int dw_pcie_cfg_read (void __iomem *addr,int where,int size,u32 *val) {@@ -255,7 +247,7 @@ static void dw_pcie_msi_set_irq(struct pcie_port *pp, int irq)static int assign_irq (int no_irqs,struct msi_desc *desc,int *pos) {int irq, pos0, i; -struct pcie_port *pp =sys_to_pcie (desc->dev->bus->sysdata); +struct pcie_port *pp = desc->dev->bus->sysdata; pos0 =bitmap_find_free_region (pp->msi_irq_in_use,MAX_MSI_IRQS ,order_base_2 (no_irqs));@@ -298,7 +290,7 @@ static int dw_msi_setup_irq(struct msi_controller *chip, struct pci_dev *pdev, {int irq, pos;struct msi_msg msg; -struct pcie_port *pp =sys_to_pcie (pdev->bus->sysdata); +struct pcie_port *pp = pdev->bus->sysdata;if (desc->msi_attrib.is_msix)return -EINVAL ;@@ -327,7 +319,7 @@ static void dw_msi_teardown_irq(struct msi_controller *chip, unsigned int irq) {struct irq_data *data =irq_get_irq_data (irq);struct msi_desc *msi =irq_data_get_msi (data); -struct pcie_port *pp =sys_to_pcie (msi->dev->bus->sysdata); +struct pcie_port *pp = msi->dev->bus->sysdata;clear_irq_range (pp, irq,1 , data->hwirq); }@@ -363,14 +355,12 @@ int dw_pcie_host_init(struct pcie_port *pp) {struct device_node *np = pp->dev->of_node;struct platform_device *pdev =to_platform_device (pp->dev); -struct of_pci_range range; -struct of_pci_range_parser parser; +struct pci_bus *bus;struct resource *cfg_res; -u32 val, ns; -const __be32 *addrp; -int i, index, ret; - - ns =of_n_size_cells (np); +LIST_HEAD (res); +u32 val; +int i, ret; +struct resource_entry *win; cfg_res =platform_get_resource_byname (pdev,IORESOURCE_MEM ,"config" );if (cfg_res) {@@ -378,85 +368,60 @@ int dw_pcie_host_init(struct pcie_port *pp) pp->cfg1_size =resource_size (cfg_res)/2 ; pp->cfg0_base = cfg_res->start; pp->cfg1_base = cfg_res->start + pp->cfg0_size; - -/* Find the untranslated configuration space address */ - index =of_property_match_string (np,"reg-names" ,"config" ); - addrp =of_get_address (np, index,NULL ,NULL ); - pp->cfg0_mod_base =of_read_number (addrp, ns); - pp->cfg1_mod_base = pp->cfg0_mod_base + pp->cfg0_size; }else {dev_err (pp->dev,"missing *config* reg space\n" ); } -if (of_pci_range_parser_init (&parser, np)) { -dev_err (pp->dev,"missing ranges property\n" ); -return -EINVAL ; - } + ret =of_pci_get_host_bridge_resources (np,0 ,0xff , &res, &pp->io_base); +if (ret) +return ret;/* Get the I/O and memory ranges from DT */ -for_each_of_pci_range (&parser, &range) { -unsigned long restype = range.flags &IORESOURCE_TYPE_BITS ; - -if (restype ==IORESOURCE_IO ) { -of_pci_range_to_resource (&range, np, &pp->io); - pp->io.name ="I/O" ; - pp->io.start =max_t (resource_size_t, -PCIBIOS_MIN_IO , - range.pci_addr + global_io_offset); - pp->io.end =min_t (resource_size_t, -IO_SPACE_LIMIT , - range.pci_addr + range.size - + global_io_offset -1 ); - pp->io_size =resource_size (&pp->io); - pp->io_bus_addr = range.pci_addr; - pp->io_base = range.cpu_addr; - -/* Find the untranslated IO space address */ - pp->io_mod_base = range.cpu_addr; - } -if (restype ==IORESOURCE_MEM ) { -of_pci_range_to_resource (&range, np, &pp->mem); - pp->mem.name ="MEM" ; - pp->mem_size =resource_size (&pp->mem); - pp->mem_bus_addr = range.pci_addr; - -/* Find the untranslated MEM space address */ - pp->mem_mod_base = range.cpu_addr; - } -if (restype ==0 ) { -of_pci_range_to_resource (&range, np, &pp->cfg); - pp->cfg0_size =resource_size (&pp->cfg)/2 ; - pp->cfg1_size =resource_size (&pp->cfg)/2 ; - pp->cfg0_base = pp->cfg.start; - pp->cfg1_base = pp->cfg.start + pp->cfg0_size; - -/* Find the untranslated configuration space address */ - pp->cfg0_mod_base = range.cpu_addr; - pp->cfg1_mod_base = pp->cfg0_mod_base + - pp->cfg0_size; +resource_list_for_each_entry (win, &res) { +switch (resource_type (win->res)) { +case IORESOURCE_IO : + pp->io = win->res; + pp->io->name ="I/O" ; + pp->io_size =resource_size (pp->io); + pp->io_bus_addr = pp->io->start - win->offset; + ret =pci_remap_iospace (pp->io, pp->io_base); +if (ret) { +dev_warn (pp->dev,"error %d: failed to map resource %pR\n" , + ret, pp->io); +continue ; + } +break ; +case IORESOURCE_MEM : + pp->mem = win->res; + pp->mem->name ="MEM" ; + pp->mem_size =resource_size (pp->mem); + pp->mem_bus_addr = pp->mem->start - win->offset; +break ; +case 0 : + pp->cfg = win->res; + pp->cfg0_size =resource_size (pp->cfg)/2 ; + pp->cfg1_size =resource_size (pp->cfg)/2 ; + pp->cfg0_base = pp->cfg->start; + pp->cfg1_base = pp->cfg->start + pp->cfg0_size; +break ; +case IORESOURCE_BUS : + pp->busn = win->res; +break ; +default : +continue ; } } - ret =of_pci_parse_bus_range (np, &pp->busn); -if (ret <0 ) { - pp->busn.name = np->name; - pp->busn.start =0 ; - pp->busn.end =0xff ; - pp->busn.flags =IORESOURCE_BUS ; -dev_dbg (pp->dev,"failed to parse bus-range property: %d, using default %pR\n" , - ret, &pp->busn); - } -if (!pp->dbi_base) { - pp->dbi_base =devm_ioremap (pp->dev, pp->cfg.start, -resource_size (&pp->cfg)); + pp->dbi_base =devm_ioremap (pp->dev, pp->cfg->start, +resource_size (pp->cfg));if (!pp->dbi_base) {dev_err (pp->dev,"error with ioremap\n" );return -ENOMEM ; } } - pp->mem_base = pp->mem.start; + pp->mem_base = pp->mem->start;if (!pp->va_cfg0_base) { pp->va_cfg0_base = devm_ioremap(pp->dev, pp->cfg0_base,@@ -505,7 +470,7 @@ int dw_pcie_host_init(struct pcie_port *pp)if (!pp->ops->rd_other_conf)dw_pcie_prog_outbound_atu (pp,PCIE_ATU_REGION_INDEX1 , -PCIE_ATU_TYPE_MEM , pp->mem_mod_base, +PCIE_ATU_TYPE_MEM , pp->mem_base, pp->mem_bus_addr, pp->mem_size);dw_pcie_wr_own_conf (pp,PCI_BASE_ADDRESS_0 ,4 ,0 );@@ -517,15 +482,29 @@ int dw_pcie_host_init(struct pcie_port *pp) val |=PORT_LOGIC_SPEED_CHANGE ;dw_pcie_wr_own_conf (pp,PCIE_LINK_WIDTH_SPEED_CONTROL ,4 , val); -#ifdef CONFIG_PCI_MSI + bus =pci_create_root_bus (pp->dev, pp->root_bus_nr, &dw_pcie_ops, + pp, &res); +if (!bus) +return -ENOMEM ; + +#ifdef CONFIG_GENERIC_MSI_IRQ_DOMAIN + bus->msi = container_of(&pp->irq_domain, struct msi_controller, domain); +#else dw_pcie_msi_chip.dev = pp->dev; - dw_pci.msi_ctrl = &dw_pcie_msi_chip; + bus->msi = &dw_pcie_msi_chip;#endif - dw_pci.nr_controllers =1 ; - dw_pci.private_data = (void **)&pp; +pci_scan_child_bus (bus); +if (pp->ops->scan_bus) + pp->ops->scan_bus (pp); + +#ifdef CONFIG_ARM +/* support old dtbs that incorrectly describe IRQs */ +pci_fixup_irqs (pci_common_swizzle, of_irq_parse_and_map_pci); +#endif -pci_common_init_dev (pp->dev, &dw_pci); +pci_assign_unassigned_bus_resources (bus); +pci_bus_add_devices (bus);return 0 ; }@@ -544,12 +523,12 @@ static int dw_pcie_rd_other_conf(struct pcie_port *pp, struct pci_bus *bus,if (bus->parent->number == pp->root_bus_nr) { type =PCIE_ATU_TYPE_CFG0 ; - cpu_addr = pp->cfg0_mod_base; + cpu_addr = pp->cfg0_base; cfg_size = pp->cfg0_size; va_cfg_base = pp->va_cfg0_base; }else { type =PCIE_ATU_TYPE_CFG1 ; - cpu_addr = pp->cfg1_mod_base; + cpu_addr = pp->cfg1_base; cfg_size = pp->cfg1_size; va_cfg_base = pp->va_cfg1_base; }@@ -559,7 +538,7 @@ static int dw_pcie_rd_other_conf(struct pcie_port *pp, struct pci_bus *bus, busdev, cfg_size); ret =dw_pcie_cfg_read (va_cfg_base + address, where, size, val);dw_pcie_prog_outbound_atu (pp,PCIE_ATU_REGION_INDEX0 , -PCIE_ATU_TYPE_IO , pp->io_mod_base, +PCIE_ATU_TYPE_IO , pp->io_base, pp->io_bus_addr, pp->io_size);return ret;@@ -579,12 +558,12 @@ static int dw_pcie_wr_other_conf(struct pcie_port *pp, struct pci_bus *bus,if (bus->parent->number == pp->root_bus_nr) { type =PCIE_ATU_TYPE_CFG0 ; - cpu_addr = pp->cfg0_mod_base; + cpu_addr = pp->cfg0_base; cfg_size = pp->cfg0_size; va_cfg_base = pp->va_cfg0_base; }else { type =PCIE_ATU_TYPE_CFG1 ; - cpu_addr = pp->cfg1_mod_base; + cpu_addr = pp->cfg1_base; cfg_size = pp->cfg1_size; va_cfg_base = pp->va_cfg1_base; }@@ -594,7 +573,7 @@ static int dw_pcie_wr_other_conf(struct pcie_port *pp, struct pci_bus *bus, busdev, cfg_size); ret =dw_pcie_cfg_write (va_cfg_base + address, where, size, val);dw_pcie_prog_outbound_atu (pp,PCIE_ATU_REGION_INDEX0 , -PCIE_ATU_TYPE_IO , pp->io_mod_base, +PCIE_ATU_TYPE_IO , pp->io_base, pp->io_bus_addr, pp->io_size);return ret;@@ -626,7 +605,7 @@ static int dw_pcie_valid_config(struct pcie_port *pp,static int dw_pcie_rd_conf (struct pci_bus *bus,u32 devfn,int where,int size,u32 *val) { -struct pcie_port *pp =sys_to_pcie (bus->sysdata); +struct pcie_port *pp = bus->sysdata;int ret;if (dw_pcie_valid_config (pp, bus,PCI_SLOT (devfn)) ==0 ) {@@ -650,7 +629,7 @@ static int dw_pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,static int dw_pcie_wr_conf (struct pci_bus *bus,u32 devfn,int where,int size,u32 val) { -struct pcie_port *pp =sys_to_pcie (bus->sysdata); +struct pcie_port *pp = bus->sysdata;int ret;if (dw_pcie_valid_config (pp, bus,PCI_SLOT (devfn)) ==0 )@@ -674,62 +653,6 @@ static struct pci_ops dw_pcie_ops = { .write = dw_pcie_wr_conf, }; -static int dw_pcie_setup (int nr,struct pci_sys_data *sys) -{ -struct pcie_port *pp; - - pp =sys_to_pcie (sys); - -if (global_io_offset <SZ_1M && pp->io_size >0 ) { - sys->io_offset = global_io_offset - pp->io_bus_addr; -pci_ioremap_io (global_io_offset, pp->io_base); - global_io_offset +=SZ_64K ; -pci_add_resource_offset (&sys->resources, &pp->io, - sys->io_offset); - } - - sys->mem_offset = pp->mem.start - pp->mem_bus_addr; -pci_add_resource_offset (&sys->resources, &pp->mem, sys->mem_offset); -pci_add_resource (&sys->resources, &pp->busn); - -return 1 ; -} - -static struct pci_bus *dw_pcie_scan_bus (int nr,struct pci_sys_data *sys) -{ -struct pci_bus *bus; -struct pcie_port *pp =sys_to_pcie (sys); - - pp->root_bus_nr = sys->busnr; - bus =pci_scan_root_bus (pp->dev, sys->busnr, - &dw_pcie_ops, sys, &sys->resources); -if (!bus) -return NULL ; - -if (bus && pp->ops->scan_bus) - pp->ops->scan_bus (pp); - -return bus; -} - -static int dw_pcie_map_irq (const struct pci_dev *dev,u8 slot,u8 pin) -{ -struct pcie_port *pp =sys_to_pcie (dev->bus->sysdata); -int irq; - - irq =of_irq_parse_and_map_pci (dev, slot, pin); -if (!irq) - irq = pp->irq; - -return irq; -} - -static struct hw_pci dw_pci = { - .setup = dw_pcie_setup, - .scan = dw_pcie_scan_bus, - .map_irq = dw_pcie_map_irq, -}; -void dw_pcie_setup_rc (struct pcie_port *pp) {u32 val;drivers/pci/host/pcie-designware.h +5
-9@@ -27,25 +27,21 @@ struct pcie_port {u8 root_bus_nr;void __iomem *dbi_base;u64 cfg0_base; -u64 cfg0_mod_base;void __iomem *va_cfg0_base;u32 cfg0_size;u64 cfg1_base; -u64 cfg1_mod_base;void __iomem *va_cfg1_base;u32 cfg1_size; -u64 io_base; -u64 io_mod_base; +resource_size_t io_base;phys_addr_t io_bus_addr;u32 io_size;u64 mem_base; -u64 mem_mod_base;phys_addr_t mem_bus_addr;u32 mem_size; -struct resource cfg; -struct resource io; -struct resource mem; -struct resource busn; +struct resource *cfg; +struct resource *io; +struct resource *mem; +struct resource *busn;int irq;u32 lanes;struct pcie_host_ops *ops;drivers/pci/host/pcie-spear13xx.c +1
-1@@ -286,7 +286,7 @@ static int spear13xx_add_pcie_port(struct pcie_port *pp,return ret; } - pp->root_bus_nr =-1 ; + pp->root_bus_nr =0 ; pp->ops = &spear13xx_pcie_host_ops; ret =dw_pcie_host_init (pp);
PATCH v6 3/6 PCI: designware: Add ARM64 support
Quoted 15 lines · Zhou Wang
Quoted 14 lines · Zhou Wang
This patch tries to unify ARM32 and ARM64 PCIe in designware driver. Delete function
dw_pcie_setup,dw_pcie_scan_bus,dw_pcie_map_irqand structhw_pci, move related operations todw_pcie_host_init.In past, we use:
pci_common_init_dev-> pcibios_init_hw -> hw->scan (dw_pcie_scan_bus)to pass 0 to
root_bus_nrin structpcie_port. This patch setpp->root_bus_nr= 0 in each PCIe host driver which is based on pcie-designware.This patch also try to use
of_pci_get_host_bridge_resourcesfor ARM32 and ARM64 according to the suggestion for Gabriele[1]
Quoted 7 lines
Quoted 7 lines
Finally this patch reverts commit
f4c55c5a3f7f"PCI: designware: Program ATU with untranslated address" based on 1/6 in this series. we delete*_mod_basein pcie-designware. This was discussed in [2]I have compiled the driver with
multi_v7_defconfig. However, I don't have ARM32 PCIe related board to do test. It will be appreciated if someone could help to test it.
I've tested this whole series on an ARM32 PCIe board:'Freescale i.MX6 Quad SABRE Lite Board' with an Intel wireless card on v4.2-rc6.
I can rescan the bus, load firmware, list nearby APs, and even get MSIs coming from the card.
Thanks,
James
PATCH v6 3/6 PCI: designware: Add ARM64 support
Quoted 8 lines
I've tested this whole series on an ARM32 PCIe board:'Freescale i.MX6 Quad
SABRE Lite Board' with an Intel wireless card on v4.2-rc6.I can rescan the bus, load firmware, list nearby APs, and even get MSIs coming from the card.
Quoted 6 lines
Tested-by James Morse <[email protected]>Thanks,
James
Many Thanks for this James!
Gab
PATCH v6 3/6 PCI: designware: Add ARM64 support
Quoted 13 lines · Gabriele Paoloni
Quoted 13 lines
I've tested this whole series on an ARM32 PCIe board:'Freescale i.MX6 Quad
SABRE Lite Board' with an Intel wireless card on v4.2-rc6.I can rescan the bus, load firmware, list nearby APs, and even get MSIs coming from the card.
Tested-by James Morse <[email protected]>Thanks,
Quoted 8 lines
Quoted 1 line
James
Many Thanks for this James!
Gab
.
Hi James,
Your test is very helpful. Many thanks for this!
Zhou
PATCH v6 4/6 PCI: hisi: Add PCIe host support for HiSilicon SoC Hip05
In reply to Zhou WangThis patch adds PCIe host support for HiSilicon SoC Hip05.
--- drivers/pci/host/Kconfig | 8 ++ drivers/pci/host/Makefile | 1 + drivers/pci/host/pcie-hisi.c | 254 +++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 263 insertions(+) create mode 100644 drivers/pci/host/pcie-hisi.c
drivers/pci/host/Kconfig +8 -0
@@ -145,4 +145,12 @@ config PCIE_IPROC_BCMA Say Y here if you want to use the Broadcom iProc PCIe controller through the BCMA bus interface +config PCI_HISI + depends on OF && ARM64 + bool "HiSilicon SoC HIP05 PCIe controller" + select PCIEPORTBUS + select PCIE_DW + help + Say Y here if you want PCIe controller support on HiSilicon HIP05 SoC + endmenu
drivers/pci/host/Makefile +1 -0
@@ -17,3 +17,4 @@ obj-$(CONFIG_PCI_VERSATILE) += pci-versatile.o obj-$(CONFIG_PCIE_IPROC) += pcie-iproc.o obj-$(CONFIG_PCIE_IPROC_PLATFORM) += pcie-iproc-platform.o obj-$(CONFIG_PCIE_IPROC_BCMA) += pcie-iproc-bcma.o +obj-$(CONFIG_PCI_HISI) += pcie-hisi.o
drivers/pci/host/pcie-hisi.c new file +254 -0
254 lines not on this page · raw message
Signature · 1 line
1.9.1
PATCH v6 4/6 PCI: hisi: Add PCIe host support for HiSilicon SoC Hip05
[+cc jingoohan1 at gmail.com]
Quoted 297 lines · Zhou Wang
This patch adds PCIe host support for HiSilicon SoC Hip05.
Signed-off-by Zhou Wang <[email protected]>--- drivers/pci/host/Kconfig | 8 ++ drivers/pci/host/Makefile | 1 + drivers/pci/host/pcie-hisi.c | 254 +++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 263 insertions(+) create mode 100644 drivers/pci/host/pcie-hisi.cdrivers/pci/host/Kconfig +8
-0@@ -145,4 +145,12 @@ config PCIE_IPROC_BCMA Say Y here if you want to use the Broadcom iProc PCIe controller through the BCMA bus interface +config PCI_HISI + depends on OF && ARM64 + bool "HiSilicon SoC HIP05 PCIe controller" + select PCIEPORTBUS + select PCIE_DW + help + Say Y here if you want PCIe controller support on HiSilicon HIP05 SoC + endmenudrivers/pci/host/Makefile +1
-0@@ -17,3 +17,4 @@ obj-$(CONFIG_PCI_VERSATILE) += pci-versatile.o obj-$(CONFIG_PCIE_IPROC) += pcie-iproc.o obj-$(CONFIG_PCIE_IPROC_PLATFORM) += pcie-iproc-platform.o obj-$(CONFIG_PCIE_IPROC_BCMA) += pcie-iproc-bcma.o +obj-$(CONFIG_PCI_HISI) += pcie-hisi.odrivers/pci/host/pcie-hisi.c new file +254
-0@@ -0,0 +1,254 @@ +/* +* PCIe host controller driver for HiSilicon Hip05 SoC +* +* Copyright (C) 2015 HiSilicon Co., Ltd. http://www.hisilicon.com +* +* Author: Zhou Wang <[email protected]> +* Dacai Zhu <[email protected]> +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* published by the Free Software Foundation. +*/ +#include <linux/interrupt.h> +#include <linux/irqdomain.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_pci.h> +#include <linux/platform_device.h> + +#include "pcie-designware.h" + +#define PCIE_SUBCTRL_MODE_REG 0x2800 +#define PCIE_SUBCTRL_SYS_STATE4_REG 0x6818 +#define PCIE_SLV_DBI_MODE 0x0 +#define PCIE_SLV_SYSCTRL_MODE 0x1 +#define PCIE_SLV_CONTENT_MODE 0x2 +#define PCIE_SLV_MSI_ASID 0x10 +#define PCIE_LTSSM_LINKUP_STATE 0x11 +#define PCIE_LTSSM_STATE_MASK 0x3F +#define PCIE_MSI_ASID_ENABLE (0x1 << 12) +#define PCIE_MSI_ASID_VALUE (0x1 << 16) +#define PCIE_MSI_TRANS_ENABLE (0x1 << 12) +#define PCIE_MSI_TRANS_REG 0x1c8 +#define PCIE_MSI_LOW_ADDRESS 0x1b4 +#define PCIE_MSI_HIGH_ADDRESS 0x1c4 +#define PCIE_MSI_ADDRESS_VAL 0xb7010040 + +#define to_hisi_pcie (x) container_of(x, struct hisi_pcie, pp) + +struct hisi_pcie { +void __iomem *subctrl_base; +void __iomem *reg_base; +struct msi_controller *msi; +u32 port_id; +struct pcie_port pp; +}; + +static inline void hisi_pcie_subctrl_writel (struct hisi_pcie *pcie, +u32 val,u32 reg) +{ +writel (val, pcie->subctrl_base + reg); +} + +static inline u32 hisi_pcie_subctrl_readl (struct hisi_pcie *pcie,u32 reg) +{ +return readl (pcie->subctrl_base + reg); +} + +static inline void hisi_pcie_apb_writel (struct hisi_pcie *pcie, +u32 val,u32 reg) +{ +writel (val, pcie->reg_base + reg); +} + +static inline u32 hisi_pcie_apb_readl (struct hisi_pcie *pcie,u32 reg) +{ +return readl (pcie->reg_base + reg); +} + +/* +* Change mode to indicate the same reg_base to base of PCIe host configure +* registers, base of RC configure space or base of vmid/asid context table +*/ +static void hisi_pcie_change_apb_mode (struct hisi_pcie *pcie,u32 mode) +{ +u32 val; +u32 bit_mask; +u32 bit_shift; +u32 port_id = pcie->port_id; +u32 reg =PCIE_SUBCTRL_MODE_REG +0x100 * port_id; + +if ((port_id ==1 ) || (port_id ==2 )) { + bit_mask =0xc ; + bit_shift =0x2 ; + }else { + bit_mask =0x6 ; + bit_shift =0x1 ; + } + + val =hisi_pcie_subctrl_readl (pcie, reg); + val = (val & (~bit_mask)) | (mode << bit_shift); +hisi_pcie_subctrl_writel (pcie, val, reg); +} + +/* Configure vmid/asid table in PCIe host */ +static void hisi_pcie_config_context (struct hisi_pcie *pcie) +{ +int i; + +hisi_pcie_change_apb_mode (pcie,PCIE_SLV_CONTENT_MODE ); + +/* +* init vmid and asid tables for all PCIe devices as 0 +* vmid table: 0 ~ 0x3ff, asid table: 0x400 ~ 0x7ff +*/ +for (i =0 ; i <0x800 ; i++) +hisi_pcie_apb_writel (pcie,0x0 , i *4 ); + +hisi_pcie_change_apb_mode (pcie,PCIE_SLV_SYSCTRL_MODE ); + +hisi_pcie_apb_writel (pcie,PCIE_MSI_ADDRESS_VAL ,PCIE_MSI_LOW_ADDRESS ); +hisi_pcie_apb_writel (pcie,0x0 ,PCIE_MSI_HIGH_ADDRESS ); +hisi_pcie_apb_writel (pcie,PCIE_MSI_ASID_ENABLE |PCIE_MSI_ASID_VALUE , +PCIE_SLV_MSI_ASID ); +hisi_pcie_apb_writel (pcie,PCIE_MSI_TRANS_ENABLE ,PCIE_MSI_TRANS_REG ); + +hisi_pcie_change_apb_mode (pcie,PCIE_SLV_DBI_MODE ); +} + +static int hisi_pcie_link_up (struct pcie_port *pp) +{ +u32 val; +struct hisi_pcie *hisi_pcie =to_hisi_pcie (pp); + + val =hisi_pcie_subctrl_readl (hisi_pcie,PCIE_SUBCTRL_SYS_STATE4_REG + +0x100 * hisi_pcie->port_id); + +return ((val &PCIE_LTSSM_STATE_MASK ) ==PCIE_LTSSM_LINKUP_STATE ); +} + +static +int hisi_pcie_msi_host_init (struct pcie_port *pp,struct msi_controller *chip) +{ +struct device_node *msi_node; +struct irq_domain *irq_domain; +struct device_node *np = pp->dev->of_node; + + msi_node =of_parse_phandle (np,"msi-parent" ,0 ); +if (!msi_node) { +dev_err (pp->dev,"failed to find msi-parent\n" ); +return -ENODEV ; + } + + irq_domain =irq_find_host (msi_node); +if (!irq_domain) { +dev_err (pp->dev,"failed to find irq domain\n" ); +return -ENODEV ; + } + + pp->irq_domain = irq_domain; + +return 0 ; +} + +static struct pcie_host_ops hisi_pcie_host_ops = { + .link_up = hisi_pcie_link_up, + .msi_host_init = hisi_pcie_msi_host_init, +}; + +static int __init hisi_add_pcie_port (struct pcie_port *pp, +struct platform_device *pdev) +{ +int ret; +u32 port_id; +struct resource busn; +struct hisi_pcie *hisi_pcie =to_hisi_pcie (pp); + +if (of_property_read_u32 (pdev->dev.of_node,"port-id" , &port_id)) { +dev_err (&pdev->dev,"failed to read port-id\n" ); +return -EINVAL ; + } +if (port_id >3 ) { +dev_err (&pdev->dev,"Invalid port-id: %d\n" , port_id); +return -EINVAL ; + } + + hisi_pcie->port_id = port_id; + +if (of_pci_parse_bus_range (pdev->dev.of_node, &busn)) { +dev_err (&pdev->dev,"failed to parse bus-ranges\n" ); +return -EINVAL ; + } + + pp->root_bus_nr = busn.start; + pp->ops = &hisi_pcie_host_ops; + +hisi_pcie_config_context (hisi_pcie); + + ret =dw_pcie_host_init (pp); +if (ret) { +dev_err (&pdev->dev,"failed to initialize host\n" ); +return ret; + } + +return 0 ; +} + +static int __init hisi_pcie_probe (struct platform_device *pdev) +{ +struct hisi_pcie *hisi_pcie; +struct pcie_port *pp; +struct resource *reg; +struct resource *subctrl; +int ret; + + hisi_pcie =devm_kzalloc (&pdev->dev,sizeof (*hisi_pcie),GFP_KERNEL ); +if (!hisi_pcie) +return -ENOMEM ; + + pp = &hisi_pcie->pp; + pp->dev = &pdev->dev; + + subctrl =platform_get_resource_byname (pdev,IORESOURCE_MEM ,"subctrl" ); + hisi_pcie->subctrl_base =devm_ioremap_nocache (&pdev->dev, + subctrl->start,resource_size (subctrl)); +if (IS_ERR (hisi_pcie->subctrl_base)) { +dev_err (pp->dev,"cannot get subctrl base\n" ); +return PTR_ERR (hisi_pcie->subctrl_base); + } + + reg =platform_get_resource_byname (pdev,IORESOURCE_MEM ,"rc_dbi" ); + hisi_pcie->reg_base =devm_ioremap_resource (&pdev->dev, reg); +if (IS_ERR (hisi_pcie->reg_base)) { +dev_err (pp->dev,"cannot get rc_dbi base\n" ); +return PTR_ERR (hisi_pcie->reg_base); + } + + hisi_pcie->pp.dbi_base = hisi_pcie->reg_base; + + ret =hisi_add_pcie_port (pp, pdev); +if (ret) +return ret; + +platform_set_drvdata (pdev, hisi_pcie); + +return 0 ; +} + +static const struct of_device_id hisi_pcie_of_match[] = { + {.compatible ="hisilicon,hip05-pcie" ,}, + {}, +}; + +MODULE_DEVICE_TABLE (of, hisi_pcie_of_match); + +static struct platform_driver hisi_pcie_driver = { + .probe = hisi_pcie_probe, + .driver = { + .name ="hisi-pcie" , + .of_match_table = hisi_pcie_of_match, + }, +}; + +module_platform_driver (hisi_pcie_driver);
PATCH v6 5/6 Documentation: DT: Add HiSilicon PCIe host binding
In reply to Zhou WangThis patch adds related DTS binding document for HiSilicon PCIe host driver.
--- .../devicetree/bindings/pci/hisilicon-pcie.txt | 46 ++++++++++++++++++++++ 1 file changed, 46 insertions(+) create mode 100644 Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
Documentation/devicetree/bindings/pci/hisilicon-pcie.txt new file +46 -0
@@ -0,0 +1,46 @@ +HiSilicon PCIe host bridge DT description + +HiSilicon PCIe host controller is based on Designware PCI core. +It shares common functions with PCIe Designware core driver and inherits +common properties defined in +Documentation/devicetree/bindings/pci/designware-pci.txt. + +Additional properties are described here: + +Required properties: +- compatible: Should contain "hisilicon,hip05-pcie". +- reg: Should contain rc_dbi, subctrl, config registers location and length. +- reg-names: Must include the following entries: + "rc_dbi": controller configuration registers; + "subctrl": whole PCIe hosts configuration registers; + "config": PCIe configuration space registers. +- msi-parent: Should be its_pcie which is an ITS receiving MSI interrupts. +- port-id: Should be 0, 1, 2 or 3. + +Optional properties: +- status: Either "ok" or "disabled". +- dma-coherent: Present if DMA operations are coherent. + +Example: + pcie@0xb0080000 { + compatible = "hisilicon,hip05-pcie", "snps,dw-pcie"; + reg = <0 0xb0080000 0 0x10000>, <0 0xb0000000 0 0x10000>, + <0x220 0x00000000 0 0x2000>; + reg-names = "rc_dbi", "subctrl", "config"; + bus-range = <0 15>; + msi-parent = <&its_pcie>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + dma-coherent; + ranges = <0x82000000 0 0x00000000 0x220 0x00000000 0 0x10000000>; + num-lanes = <8>; + port-id = <1>; + #interrupts-cells = <1>; + interrupts-map-mask = <0xf800 0 0 7>; + interrupts-map = <0x0 0 0 1 &mbigen_pcie 1 10 + 0x0 0 0 2 &mbigen_pcie 2 11 + 0x0 0 0 3 &mbigen_pcie 3 12 + 0x0 0 0 4 &mbigen_pcie 4 13>; + status = "ok"; + };
Signature · 1 line
1.9.1
PATCH v6 5/6 Documentation: DT: Add HiSilicon PCIe host binding
[+cc jingoohan1 at gmail.com]
Quoted 61 lines · Zhou Wang
This patch adds related DTS binding document for HiSilicon PCIe host driver.
Signed-off-by Zhou Wang <[email protected]>--- .../devicetree/bindings/pci/hisilicon-pcie.txt | 46 ++++++++++++++++++++++ 1 file changed, 46 insertions(+) create mode 100644 Documentation/devicetree/bindings/pci/hisilicon-pcie.txtDocumentation/devicetree/bindings/pci/hisilicon-pcie.txt new file +46
-0@@ -0,0 +1,46 @@ +HiSilicon PCIe host bridge DT description + +HiSilicon PCIe host controller is based on Designware PCI core. +It shares common functions with PCIe Designware core driver and inherits +common properties defined in +Documentation/devicetree/bindings/pci/designware-pci.txt. + +Additional properties are described here: + +Required properties: +- compatible: Should contain "hisilicon,hip05-pcie". +- reg: Should contain rc_dbi, subctrl, config registers location and length. +- reg-names: Must include the following entries: + "rc_dbi": controller configuration registers; + "subctrl": whole PCIe hosts configuration registers; + "config": PCIe configuration space registers. +- msi-parent: Should be its_pcie which is an ITS receiving MSI interrupts. +- port-id: Should be 0, 1, 2 or 3. + +Optional properties: +- status: Either "ok" or "disabled". +- dma-coherent: Present if DMA operations are coherent. + +Example: + pcie at 0xb0080000 { + compatible = "hisilicon,hip05-pcie", "snps,dw-pcie"; + reg = <0 0xb0080000 0 0x10000>, <0 0xb0000000 0 0x10000>, + <0x220 0x00000000 0 0x2000>; + reg-names = "rc_dbi", "subctrl", "config"; + bus-range = <0 15>; + msi-parent = <&its_pcie>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + dma-coherent; + ranges = <0x82000000 0 0x00000000 0x220 0x00000000 0 0x10000000>; + num-lanes = <8>; + port-id = <1>; + #interrupts-cells = <1>; + interrupts-map-mask = <0xf800 0 0 7>; + interrupts-map = <0x0 0 0 1 &mbigen_pcie 1 10 + 0x0 0 0 2 &mbigen_pcie 2 11 + 0x0 0 0 3 &mbigen_pcie 3 12 + 0x0 0 0 4 &mbigen_pcie 4 13>; + status = "ok"; + };
PATCH v6 6/6 MAINTAINERS: Add pcie-hisi maintainer
In reply to Zhou Wang--- MAINTAINERS | 7 +++++++ 1 file changed, 7 insertions(+)
MAINTAINERS +7 -0
@@ -7854,6 +7854,13 @@ S: Maintained F: Documentation/devicetree/bindings/pci/xgene-pci-msi.txt F: drivers/pci/host/pci-xgene-msi.c +PCIE DRIVER FOR HISILICON +M: Zhou Wang <[email protected]> +L: [email protected] +S: Maintained +F: Documentation/devicetree/bindings/pci/hisilicon-pcie.txt +F: drivers/pci/host/pcie-hisi.c + PCMCIA SUBSYSTEM P: Linux PCMCIA Team L: [email protected]
Signature · 1 line
1.9.1
PATCH v6 6/6 MAINTAINERS: Add pcie-hisi maintainer
[+cc jingoohan1 at gmail.com]
Quoted 24 lines · Zhou Wang
Signed-off-by Zhou Wang <[email protected]>--- MAINTAINERS | 7 +++++++ 1 file changed, 7 insertions(+)MAINTAINERS +7
-0@@ -7854,6 +7854,13 @@ S: Maintained F: Documentation/devicetree/bindings/pci/xgene-pci-msi.txt F: drivers/pci/host/pci-xgene-msi.c +PCIE DRIVER FOR HISILICON +M: Zhou Wang <[email protected]> +L: linux-pci at vger.kernel.org +S: Maintained +F: Documentation/devicetree/bindings/pci/hisilicon-pcie.txt +F: drivers/pci/host/pcie-hisi.c + PCMCIA SUBSYSTEM P: Linux PCMCIA Team L: linux-pcmcia at lists.infradead.org
v6 cover PCI: hisi: Add PCIe host support for HiSilicon SoC Hip05
In reply to Zhou Wang[+cc jingoohan1 at gmail.com]
Quoted 89 lines · Zhou Wang
This patchset adds PCIe host support for HiSilicon SoC Hip05. The PCIe hosts use PCIe IP core from Synopsys, So this driver is base on designware PCIe driver.
Hip05 is an ARMv8 architecture SoC. It should be able to use ARM64 PCIe API in designeware PCIe driver. So this patch also adds ARM64 support for designware pcie.
This patchset is based on v4.2-rc1.
Change from v5:
- Merge 1/6 in this series, discussion about this can be found in [1]Change from v4:
- Change the author of 1/5 to Gabriele.
- Modify problems in 3/5 pointed by Bjorn.
- Modify spelling problems in 4/5.Change from v3:
- Change 1/5 to what Gabriele suggested.
- Usewin->__res.startto get*_mod_basein 2/5, this fix a bug in v3 series.Change from v2:
- Move structpci_dev*dev and structpci_sys_data*sys inpcibios_align_resourcein 1/5.
- Add Gabriele's codes in 2/5 which delete unnecessary information parse and useof_pci_get_host_bridge_resourcesfor both ARM32 and ARM64.
- Add maintainer patch 5/5.Change from RFC v1:
- Add 1/4 patch by Arnd which removesalign_resourcecallback in ARMpcibios_align_resource.
- Change head file in pcie-designware fromasm/hardirq.htolinux/hardirq.h.
- Setpp->root_bus_nr= 0 in dra7xx, exynos, imx6, keystone, layerscape, spear13xx.
- Remove unnecessary parentheses of some macros in pcie-hisi.
- Use macro to replace some magic values.
- Merge two loops together and add some comments about it incontext_configfunction in pcie-hisi.
- Modify some value of items in pcie node example in binding document.Change from RFC:
- deletedw_pcie_setup,dw_pcie_scan_bus,dw_pcie_map_irqand structhw_pci, merge related operations intodw_pcie_host_init.Link of v5:
- http://www.spinics.net/lists/devicetree/msg87959.html
Link of v4:
- http://www.spinics.net/lists/arm-kernel/msg433050.html
Link of v3:
- http://www.spinics.net/lists/linux-pci/msg42539.html
Link of v2:
- http://www.spinics.net/lists/linux-pci/msg41844.html
Link of RFC v1:
- http://www.spinics.net/lists/linux-pci/msg41305.html
Link of RFC:
- http://www.spinics.net/lists/linux-pci/msg40434.html[1] http://lists.infradead.org/pipermail/linux-arm-kernel/2015-July/359741.html
Zhou Wang (4):
PCI: designware: Add ARM64 support
PCI: hisi: Add PCIe host support for HiSilicon SoC Hip05
Documentation: DT: Add HiSilicon PCIe host binding
MAINTAINERS: Add pcie-hisi maintainergabriele paoloni (2):
PCI: designware: move calculation of bus addresses to DRA7xx ARM/PCI: removealign_resourceinpci_sys_data.../devicetree/bindings/pci/hisilicon-pcie.txt | 46 ++++ MAINTAINERS | 7 + arch/arm/include/asm/mach/pci.h | 5 - arch/arm/kernel/bios32.c | 12 +- drivers/pci/host/Kconfig | 8 + drivers/pci/host/Makefile | 1 + drivers/pci/host/pci-dra7xx.c | 14 ++ drivers/pci/host/pci-exynos.c | 2 +- drivers/pci/host/pci-imx6.c | 2 +- drivers/pci/host/pci-keystone-dw.c | 2 +- drivers/pci/host/pci-keystone.c | 2 +- drivers/pci/host/pci-layerscape.c | 2 +- drivers/pci/host/pcie-designware.c | 236 ++++++------------- drivers/pci/host/pcie-designware.h | 14 +- drivers/pci/host/pcie-hisi.c | 254 +++++++++++++++++++++ drivers/pci/host/pcie-spear13xx.c | 2 +- 16 files changed, 425 insertions(+), 184 deletions(-) create mode 100644 Documentation/devicetree/bindings/pci/hisilicon-pcie.txt create mode 100644 drivers/pci/host/pcie-hisi.c
v6 cover PCI: hisi: Add PCIe host support for HiSilicon SoC Hip05
Hi Bjorn and all
Any comment on this patchset?
Thanks
Gab
Quoted 121 lines
-----Original Message-----
From: Wangzhou (B)
Sent: Friday, August 07, 2015 7:01 AM
To: Wangzhou (B)
Cc: Bjorn Helgaas; Jingoo Han; Pratyush Anand; Arnd Bergmann; linux at arm.linux.org.uk; thomas.petazzoni at free-electrons.com; Gabriele Paoloni; lorenzo.pieralisi at arm.com; James Morse; Liviu.Dudau at arm.com; Jason Cooper; robh at kernel.org; linux-pci at vger.kernel.org; linux-arm- kernel at lists.infradead.org; devicetree at vger.kernel.org; Yuanzhichang; Zhudacai; zhangjukuo; qiuzhenfa; liudongdong (C); qiujiang; Kangfenglong; xuwei (O); Liguozhu (Kenneth)
Subject: Re: [PATCH v6 0/6] PCI: hisi: Add PCIe host support for HiSilicon SoC Hip05[+cc jingoohan1 at gmail.com]
Quoted 1 line · Zhou Wang
This patchset adds PCIe host support for HiSilicon SoC Hip05. The
PCIe hosts
Quoted 1 line
use PCIe IP core from Synopsys, So this driver is base on designware
PCIe driver.
Quoted 2 lines
Hip05 is an ARMv8 architecture SoC. It should be able to use ARM64
PCIe API in
Quoted 1 line
designeware PCIe driver. So this patch also adds ARM64 support for
designware
Quoted 7 lines
pcie.
This patchset is based on v4.2-rc1.
Change from v5:
- Merge 1/6 in this series, discussion about this can be found in [1]Quoted 8 lines
Change from v4:
- Change the author of 1/5 to Gabriele.
- Modify problems in 3/5 pointed by Bjorn.
- Modify spelling problems in 4/5.Change from v3:
- Change 1/5 to what Gabriele suggested.
- Usewin->__res.startto get*_mod_basein 2/5, this fix a bug in v3series.
Quoted 5 lines
Change from v2:
- Move structpci_dev*dev and structpci_sys_data*sys inpcibios_align_resourcein 1/5.
- Add Gabriele's codes in 2/5 which delete unnecessary informationparse and
Quoted 7 lines
use
of_pci_get_host_bridge_resourcesfor both ARM32 and ARM64.
- Add maintainer patch 5/5.Change from RFC v1:
- Add 1/4 patch by Arnd which removesalign_resourcecallback in ARMpcibios_align_resource.
- Change head file in pcie-designware fromasm/hardirq.hto
linux/hardirq.h.Quoted 1 line
- Set
pp->root_bus_nr= 0 in dra7xx, exynos, imx6, keystone,layerscape,
Quoted 4 lines
spear13xx.
- Remove unnecessary parentheses of some macros in pcie-hisi.
- Use macro to replace some magic values.
- Merge two loops together and add some comments about it in
context_configQuoted 5 lines
function in pcie-hisi.
- Modify some value of items in pcie node example in binding document.Change from RFC:
- deletedw_pcie_setup,dw_pcie_scan_bus,dw_pcie_map_irqand struct
hw_pci,Quoted 15 lines
merge related operations into
dw_pcie_host_init.Link of v5:
- http://www.spinics.net/lists/devicetree/msg87959.html
Link of v4:
- http://www.spinics.net/lists/arm-kernel/msg433050.html
Link of v3:
- http://www.spinics.net/lists/linux-pci/msg42539.html
Link of v2:
- http://www.spinics.net/lists/linux-pci/msg41844.html
Link of RFC v1:
- http://www.spinics.net/lists/linux-pci/msg41305.html
Link of RFC:
- http://www.spinics.net/lists/linux-pci/msg40434.htmlQuoted 1 line
[1] http://lists.infradead.org/pipermail/linux-arm-kernel/2015-
July/359741.html
Quoted 11 lines
Zhou Wang (4):
PCI: designware: Add ARM64 support
PCI: hisi: Add PCIe host support for HiSilicon SoC Hip05
Documentation: DT: Add HiSilicon PCIe host binding
MAINTAINERS: Add pcie-hisi maintainergabriele paoloni (2):
PCI: designware: move calculation of bus addresses to DRA7xx ARM/PCI: removealign_resourceinpci_sys_dataQuoted 13 lines
.../devicetree/bindings/pci/hisilicon-pcie.txt | 46 ++++ MAINTAINERS | 7 + arch/arm/include/asm/mach/pci.h | 5 - arch/arm/kernel/bios32.c | 12 +- drivers/pci/host/Kconfig | 8 + drivers/pci/host/Makefile | 1 + drivers/pci/host/pci-dra7xx.c | 14 ++ drivers/pci/host/pci-exynos.c | 2 +- drivers/pci/host/pci-imx6.c | 2 +- drivers/pci/host/pci-keystone-dw.c | 2 +- drivers/pci/host/pci-keystone.c | 2 +- drivers/pci/host/pci-layerscape.c | 2 +- drivers/pci/host/pcie-designware.c | 236 ++++++-------------
Quoted 2 lines
drivers/pci/host/pcie-designware.h | 14 +- drivers/pci/host/pcie-hisi.c | 254+++++++++++++++++++++
Quoted 3 lines
drivers/pci/host/pcie-spear13xx.c | 2 +- 16 files changed, 425 insertions(+), 184 deletions(-) create mode 100644 Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
Quoted 2 lines
create mode 100644 drivers/pci/host/pcie-hisi.c
v6 cover PCI: hisi: Add PCIe host support for HiSilicon SoC Hip05
In reply to Zhou Wang[+cc jingoohan1 at gmail.com]
Quoted 89 lines · Zhou Wang
This patchset adds PCIe host support for HiSilicon SoC Hip05. The PCIe hosts use PCIe IP core from Synopsys, So this driver is base on designware PCIe driver.
Hip05 is an ARMv8 architecture SoC. It should be able to use ARM64 PCIe API in designeware PCIe driver. So this patch also adds ARM64 support for designware pcie.
This patchset is based on v4.2-rc1.
Change from v5:
- Merge 1/6 in this series, discussion about this can be found in [1]Change from v4:
- Change the author of 1/5 to Gabriele.
- Modify problems in 3/5 pointed by Bjorn.
- Modify spelling problems in 4/5.Change from v3:
- Change 1/5 to what Gabriele suggested.
- Usewin->__res.startto get*_mod_basein 2/5, this fix a bug in v3 series.Change from v2:
- Move structpci_dev*dev and structpci_sys_data*sys inpcibios_align_resourcein 1/5.
- Add Gabriele's codes in 2/5 which delete unnecessary information parse and useof_pci_get_host_bridge_resourcesfor both ARM32 and ARM64.
- Add maintainer patch 5/5.Change from RFC v1:
- Add 1/4 patch by Arnd which removesalign_resourcecallback in ARMpcibios_align_resource.
- Change head file in pcie-designware fromasm/hardirq.htolinux/hardirq.h.
- Setpp->root_bus_nr= 0 in dra7xx, exynos, imx6, keystone, layerscape, spear13xx.
- Remove unnecessary parentheses of some macros in pcie-hisi.
- Use macro to replace some magic values.
- Merge two loops together and add some comments about it incontext_configfunction in pcie-hisi.
- Modify some value of items in pcie node example in binding document.Change from RFC:
- deletedw_pcie_setup,dw_pcie_scan_bus,dw_pcie_map_irqand structhw_pci, merge related operations intodw_pcie_host_init.Link of v5:
- http://www.spinics.net/lists/devicetree/msg87959.html
Link of v4:
- http://www.spinics.net/lists/arm-kernel/msg433050.html
Link of v3:
- http://www.spinics.net/lists/linux-pci/msg42539.html
Link of v2:
- http://www.spinics.net/lists/linux-pci/msg41844.html
Link of RFC v1:
- http://www.spinics.net/lists/linux-pci/msg41305.html
Link of RFC:
- http://www.spinics.net/lists/linux-pci/msg40434.html[1] http://lists.infradead.org/pipermail/linux-arm-kernel/2015-July/359741.html
Zhou Wang (4):
PCI: designware: Add ARM64 support
PCI: hisi: Add PCIe host support for HiSilicon SoC Hip05
Documentation: DT: Add HiSilicon PCIe host binding
MAINTAINERS: Add pcie-hisi maintainergabriele paoloni (2):
PCI: designware: move calculation of bus addresses to DRA7xx ARM/PCI: removealign_resourceinpci_sys_data.../devicetree/bindings/pci/hisilicon-pcie.txt | 46 ++++ MAINTAINERS | 7 + arch/arm/include/asm/mach/pci.h | 5 - arch/arm/kernel/bios32.c | 12 +- drivers/pci/host/Kconfig | 8 + drivers/pci/host/Makefile | 1 + drivers/pci/host/pci-dra7xx.c | 14 ++ drivers/pci/host/pci-exynos.c | 2 +- drivers/pci/host/pci-imx6.c | 2 +- drivers/pci/host/pci-keystone-dw.c | 2 +- drivers/pci/host/pci-keystone.c | 2 +- drivers/pci/host/pci-layerscape.c | 2 +- drivers/pci/host/pcie-designware.c | 236 ++++++------------- drivers/pci/host/pcie-designware.h | 14 +- drivers/pci/host/pcie-hisi.c | 254 +++++++++++++++++++++ drivers/pci/host/pcie-spear13xx.c | 2 +- 16 files changed, 425 insertions(+), 184 deletions(-) create mode 100644 Documentation/devicetree/bindings/pci/hisilicon-pcie.txt create mode 100644 drivers/pci/host/pcie-hisi.c