Bluetooth: btqca: Introduce generic QCA ROME support

This is for supporting BT for QCA ROME with vendor specific HCI commands and initialization on the chip. This will have USB/UART implementation both, but for now, adding UART vendor specific commands to patch downloading and set Bluetooth device address using vendor specific command.

---
 drivers/bluetooth/Kconfig  |   4 +
 drivers/bluetooth/Makefile |   1 +
 drivers/bluetooth/btqca.c  | 392 +++++++++++++++++++++++++++++++++++++++++++++
 drivers/bluetooth/btqca.h  | 135 ++++++++++++++++
 4 files changed, 532 insertions(+)
 create mode 100644 drivers/bluetooth/btqca.c
 create mode 100644 drivers/bluetooth/btqca.h

index 79e8234..f580334 100644
@@ -13,6 +13,10 @@ config BT_RTL
 	tristate
 	select FW_LOADER
 
+config BT_QCA
+	tristate
+	select FW_LOADER
+
 config BT_HCIBTUSB
 	tristate "HCI USB driver"
 	depends on USB

index f40e194..15a0d1d 100644
@@ -22,6 +22,7 @@ obj-$(CONFIG_BT_MRVL_SDIO)	+= btmrvl_sdio.o
 obj-$(CONFIG_BT_WILINK)		+= btwilink.o
 obj-$(CONFIG_BT_BCM)		+= btbcm.o
 obj-$(CONFIG_BT_RTL)		+= btrtl.o
+obj-$(CONFIG_BT_QCA)		+= btqca.o
 
 btmrvl-y			:= btmrvl_main.o
 btmrvl-$(CONFIG_DEBUG_FS)	+= btmrvl_debugfs.o

2.0.5

Hi Ben,

patch has been applied to bluetooth-next tree.

Regards

Marcel