Skip to contentSkip to conversation

imx: add cpu type for i.MX2 and i.MX3

PATCH Superseded Peng Fan 3 participants 10 messages Aug 10, 2015 – Aug 13, 2015

Subsystems (2)

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore

Peng Fan

author
#0 lore raw

PATCH 1/4 imx: add cpu type for i.MX2 and i.MX3

Add cpu types for i.MX2/3.

Cc Stefano Babic <[email protected]>
---
 arch/arm/include/asm/arch-imx/cpu.h | 5 +++++
 1 file changed, 5 insertions(+)
arch/arm/include/asm/arch-imx/cpu.h +5 -0
index c7f9fff..71208aa 100644
@@ -4,6 +4,11 @@
  * SPDX-License-Identifier:	GPL-2.0+
  */
 
+#define MXC_CPU_MX23		0x23
+#define MXC_CPU_MX25		0x25
+#define MXC_CPU_MX28		0x28
+#define MXC_CPU_MX31		0x31
+#define MXC_CPU_MX35		0x35
 #define MXC_CPU_MX51		0x51
 #define MXC_CPU_MX53		0x53
 #define MXC_CPU_MX6SL		0x60
Signature · 1 line
1.8.4
author
#1 lore raw

PATCH 2/4 imx: mx31 use new formula for get_cpu_rev

Use new formula for get_cpu_rev, since we need to use this formula to do runtime check for all i.MXes.

Cc Stefano Babic <[email protected]>
---
 arch/arm/cpu/arm1136/mx31/generic.c        | 2 +-
 arch/arm/include/asm/arch-mx31/sys_proto.h | 2 ++
 2 files changed, 3 insertions(+), 1 deletion(-)
arch/arm/cpu/arm1136/mx31/generic.c +1 -1
index 060d46b..fe96670 100644
@@ -175,7 +175,7 @@ u32 get_cpu_rev(void)
 
 	for (i = 0; i < ARRAY_SIZE(mx31_cpu_type); i++)
 		if (srev == mx31_cpu_type[i].srev)
-			return mx31_cpu_type[i].v;
+			return mx31_cpu_type[i].v | (MXC_CPU_MX31 << 12);
 
 	return srev | 0x8000;
 }
arch/arm/include/asm/arch-mx31/sys_proto.h +2 -0
index b0dfcba..1626442 100644
@@ -8,6 +8,8 @@
 #ifndef _SYS_PROTO_H_
 #define _SYS_PROTO_H_
 
+#include "../arch-imx/cpu.h"
+
 struct mxc_weimcs {
 	u32 upper;
 	u32 lower;
Signature · 1 line
1.8.4
#2 lore raw

PATCH 2/4 imx: mx31 use new formula for get_cpu_rev

Quoted 29 lines · Peng Fan

Use new formula for get_cpu_rev, since we need to use this formula to do runtime check for all i.MXes.

Cc Stefano Babic <[email protected]>
---
 arch/arm/cpu/arm1136/mx31/generic.c        | 2 +-
 arch/arm/include/asm/arch-mx31/sys_proto.h | 2 ++
 2 files changed, 3 insertions(+), 1 deletion(-)
arch/arm/cpu/arm1136/mx31/generic.c +1 -1
index 060d46b..fe96670 100644
@@ -175,7 +175,7 @@ u32 get_cpu_rev(void)
 
 	for (i = 0; i < ARRAY_SIZE(mx31_cpu_type); i++)
 		if (srev == mx31_cpu_type[i].srev)
-			return mx31_cpu_type[i].v;
+			return mx31_cpu_type[i].v | (MXC_CPU_MX31 << 12);
 
 	return srev | 0x8000;
 }
arch/arm/include/asm/arch-mx31/sys_proto.h +0 -0
index b0dfcba..1626442 100644

arch/arm/include/asm/arch-mx31/sys_proto.h line 15

Quoted 8 lines
arch/arm/include/asm/arch-mx31/sys_proto.h +2 -0
@@ -8,6 +8,8 @@
 #ifndef _SYS_PROTO_H_
 #define _SYS_PROTO_H_
 
+#include "../arch-imx/cpu.h"
+
 struct mxc_weimcs {
 	u32 upper;
 	u32 lower;

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
author
#3 lore raw

PATCH 3/4 imx: mxs: reimplement get_cpu_rev

In reply to Peng Fan

Rewrite get_cpu_rev, from "static const char *get_cpu_rev(void)" to "u32 get_cpu_rev(void)". To align with get_cpu_rev of other i.MXes.

Also write get_imx_type to replace get_cpu_type, since we have macro named get_cpu_type.

Cc Stefano Babic <[email protected]>
---
 arch/arm/cpu/arm926ejs/mxs/mxs.c          | 52 ++++++++++++++-----------------
 arch/arm/include/asm/arch-mxs/sys_proto.h |  1 +
 2 files changed, 25 insertions(+), 28 deletions(-)
arch/arm/cpu/arm926ejs/mxs/mxs.c +24 -28
index ef130ae..30dbf5e 100644
@@ -132,23 +132,7 @@ int arch_cpu_init(void)
 	return 0;
 }
 
-#if defined(CONFIG_DISPLAY_CPUINFO)
-static const char *get_cpu_type(void)
-{
-	struct mxs_digctl_regs *digctl_regs =
-		(struct mxs_digctl_regs *)MXS_DIGCTL_BASE;
-
-	switch (readl(&digctl_regs->hw_digctl_chipid) & HW_DIGCTL_CHIPID_MASK) {
-	case HW_DIGCTL_CHIPID_MX23:
-		return "23";
-	case HW_DIGCTL_CHIPID_MX28:
-		return "28";
-	default:
-		return "??";
-	}
-}
-
-static const char *get_cpu_rev(void)
+u32 get_cpu_rev(void)
 {
 	struct mxs_digctl_regs *digctl_regs =
 		(struct mxs_digctl_regs *)MXS_DIGCTL_BASE;
@@ -158,38 +142,50 @@ static const char *get_cpu_rev(void)
 	case HW_DIGCTL_CHIPID_MX23:
 		switch (rev) {
 		case 0x0:
-			return "1.0";
 		case 0x1:
-			return "1.1";
 		case 0x2:
-			return "1.2";
 		case 0x3:
-			return "1.3";
 		case 0x4:
-			return "1.4";
+			return (MXC_CPU_MX23 << 12) | (rev + 0x10);
 		default:
-			return "??";
+			return 0;
 		}
 	case HW_DIGCTL_CHIPID_MX28:
 		switch (rev) {
 		case 0x1:
-			return "1.2";
+			return (MXC_CPU_MX28 << 12) | 0x12;
 		default:
-			return "??";
+			return 0;
 		}
 	default:
+		return 0;
+	}
+}
+
+#if defined(CONFIG_DISPLAY_CPUINFO)
+const char *get_imx_type(u32 imxtype)
+{
+	switch (imxtype) {
+	case MXC_CPU_MX23:
+		return "23";	/* Quad-Plus version of the mx6 */
+	case MXC_CPU_MX28:
+		return "28";	/* Dual-Plus version of the mx6 */
+	default:
 		return "??";
 	}
 }
 
 int print_cpuinfo(void)
 {
+	u32 cpurev;
 	struct mxs_spl_data *data = (struct mxs_spl_data *)
 		((CONFIG_SYS_TEXT_BASE - sizeof(struct mxs_spl_data)) & ~0xf);
 
-	printf("CPU:   Freescale i.MX%s rev%s at %d MHz\n",
-		get_cpu_type(),
-		get_cpu_rev(),
+	cpurev = get_cpu_rev();
+	printf("CPU:   Freescale i.MX%s rev%d.%d@%d MHz\n",
+	       get_imx_type((cpurev & 0xFF000) >> 12),
+	       (cpurev & 0x000F0) >> 4,
+	       (cpurev & 0x0000F) >> 0,
 		mxc_get_clock(MXC_ARM_CLK) / 1000000);
 	printf("BOOT:  %s\n", mxs_boot_modes[data->boot_mode_idx].mode);
 	return 0;
arch/arm/include/asm/arch-mxs/sys_proto.h +1 -0
index 4678723..d6e9fdb 100644
@@ -11,6 +11,7 @@
 #define __SYS_PROTO_H__
 
 #include <asm/imx-common/regs-common.h>
+#include <../arch-imx/cpu.h>
 
 int mxs_reset_block(struct mxs_register_32 *reg);
 int mxs_wait_mask_set(struct mxs_register_32 *reg,
Signature · 1 line
1.8.4
#4 lore raw

PATCH 3/4 imx: mxs: reimplement get_cpu_rev

Quoted 110 lines · Peng Fan

Rewrite get_cpu_rev, from "static const char *get_cpu_rev(void)" to "u32 get_cpu_rev(void)". To align with get_cpu_rev of other i.MXes.

Also write get_imx_type to replace get_cpu_type, since we have macro named get_cpu_type.

Cc Stefano Babic <[email protected]>
---
 arch/arm/cpu/arm926ejs/mxs/mxs.c          | 52 ++++++++++++++-----------------
 arch/arm/include/asm/arch-mxs/sys_proto.h |  1 +
 2 files changed, 25 insertions(+), 28 deletions(-)
arch/arm/cpu/arm926ejs/mxs/mxs.c +24 -28
index ef130ae..30dbf5e 100644
@@ -132,23 +132,7 @@ int arch_cpu_init(void)
 	return 0;
 }
 
-#if defined(CONFIG_DISPLAY_CPUINFO)
-static const char *get_cpu_type(void)
-{
-	struct mxs_digctl_regs *digctl_regs =
-		(struct mxs_digctl_regs *)MXS_DIGCTL_BASE;
-
-	switch (readl(&digctl_regs->hw_digctl_chipid) & HW_DIGCTL_CHIPID_MASK) {
-	case HW_DIGCTL_CHIPID_MX23:
-		return "23";
-	case HW_DIGCTL_CHIPID_MX28:
-		return "28";
-	default:
-		return "??";
-	}
-}
-
-static const char *get_cpu_rev(void)
+u32 get_cpu_rev(void)
 {
 	struct mxs_digctl_regs *digctl_regs =
 		(struct mxs_digctl_regs *)MXS_DIGCTL_BASE;
@@ -158,38 +142,50 @@ static const char *get_cpu_rev(void)
 	case HW_DIGCTL_CHIPID_MX23:
 		switch (rev) {
 		case 0x0:
-			return "1.0";
 		case 0x1:
-			return "1.1";
 		case 0x2:
-			return "1.2";
 		case 0x3:
-			return "1.3";
 		case 0x4:
-			return "1.4";
+			return (MXC_CPU_MX23 << 12) | (rev + 0x10);
 		default:
-			return "??";
+			return 0;
 		}
 	case HW_DIGCTL_CHIPID_MX28:
 		switch (rev) {
 		case 0x1:
-			return "1.2";
+			return (MXC_CPU_MX28 << 12) | 0x12;
 		default:
-			return "??";
+			return 0;
 		}
 	default:
+		return 0;
+	}
+}
+
+#if defined(CONFIG_DISPLAY_CPUINFO)
+const char *get_imx_type(u32 imxtype)
+{
+	switch (imxtype) {
+	case MXC_CPU_MX23:
+		return "23";	/* Quad-Plus version of the mx6 */
+	case MXC_CPU_MX28:
+		return "28";	/* Dual-Plus version of the mx6 */
+	default:
 		return "??";
 	}
 }
 
 int print_cpuinfo(void)
 {
+	u32 cpurev;
 	struct mxs_spl_data *data = (struct mxs_spl_data *)
 		((CONFIG_SYS_TEXT_BASE - sizeof(struct mxs_spl_data)) & ~0xf);
 
-	printf("CPU:   Freescale i.MX%s rev%s at %d MHz\n",
-		get_cpu_type(),
-		get_cpu_rev(),
+	cpurev = get_cpu_rev();
+	printf("CPU:   Freescale i.MX%s rev%d.%d at %d MHz\n",
+	       get_imx_type((cpurev & 0xFF000) >> 12),
+	       (cpurev & 0x000F0) >> 4,
+	       (cpurev & 0x0000F) >> 0,
 		mxc_get_clock(MXC_ARM_CLK) / 1000000);
 	printf("BOOT:  %s\n", mxs_boot_modes[data->boot_mode_idx].mode);
 	return 0;
arch/arm/include/asm/arch-mxs/sys_proto.h +0 -0
index 4678723..d6e9fdb 100644

arch/arm/include/asm/arch-mxs/sys_proto.h line 17

Quoted 7 lines
arch/arm/include/asm/arch-mxs/sys_proto.h +1 -0
@@ -11,6 +11,7 @@
 #define __SYS_PROTO_H__
 
 #include <asm/imx-common/regs-common.h>
+#include <../arch-imx/cpu.h>
 
 int mxs_reset_block(struct mxs_register_32 *reg);
 int mxs_wait_mask_set(struct mxs_register_32 *reg,

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
author
#5 lore raw

PATCH 4/4 imx-common: consolidate macros and prototypes into sys_proto.h

In reply to Peng Fan

Move most macro definitions and prototypes into "arch/arm/include/asm/imx-common/sys_proto.h" to avoid duplicated function prototypes and marco definitions for different i.MX SoCs.

This patch do not remove the sys_proto.h for different i.MX SoCs, because we need to modify lots of driver code and others. This patch remove duplicated macros and prototypes and incude "sys_proto.h" of imx-common for each sys_proto.h of different i.MX platforms. Then later we should avoid add stuff in sys_proto.h of each platform, and modify driver to include common sys_proto.h.

Cc Stefano Babic <[email protected]>
---
 arch/arm/include/asm/arch-mx31/sys_proto.h  |  7 ++---
 arch/arm/include/asm/arch-mx35/sys_proto.h  | 12 ++++----
 arch/arm/include/asm/arch-mx5/sys_proto.h   | 22 +-------------
 arch/arm/include/asm/arch-mx6/sys_proto.h   | 45 +----------------------------
 arch/arm/include/asm/arch-mxs/sys_proto.h   | 15 ++--------
 arch/arm/include/asm/imx-common/sys_proto.h | 45 +++++++++++++++++++++++++++++
 6 files changed, 59 insertions(+), 87 deletions(-)
 create mode 100644 arch/arm/include/asm/imx-common/sys_proto.h
arch/arm/include/asm/arch-mx31/sys_proto.h +3 -4
index 1626442..674b25c 100644
@@ -5,10 +5,10 @@
  * SPDX-License-Identifier:	GPL-2.0+
  */
 
-#ifndef _SYS_PROTO_H_
-#define _SYS_PROTO_H_
+#ifndef _MX31_SYS_PROTO_H_
+#define _MX31_SYS_PROTO_H_
 
-#include "../arch-imx/cpu.h"
+#include <asm/imx-common/sys_proto.h>
 
 struct mxc_weimcs {
 	u32 upper;
@@ -18,5 +18,4 @@ struct mxc_weimcs {
 
 void mxc_setup_weimcs(int cs, const struct mxc_weimcs *weimcs);
 int mxc_mmc_init(bd_t *bis);
-u32 get_cpu_rev(void);
 #endif
arch/arm/include/asm/arch-mx35/sys_proto.h +6 -6
index 35c0352..0979fda 100644
@@ -5,12 +5,12 @@
  * SPDX-License-Identifier:	GPL-2.0+
  */
 
-#ifndef _SYS_PROTO_H_
-#define _SYS_PROTO_H_
+#ifndef _MX35_SYS_PROTO_H_
+#define _MX35_SYS_PROTO_H_
 
-u32 get_cpu_rev(void);
-void mx3_setup_sdram_bank(u32 start_address, u32 ddr2_config,
-	u32 row, u32 col, u32 dsize, u32 refresh);
-#define is_soc_rev(rev)	((get_cpu_rev() & 0xFF) - rev)
+#include <asm/imx-common/sys_proto.h>
+
+void mx3_setup_sdram_bank(u32 start_address, u32 ddr2_config, u32 row,
+			  u32 col, u32 dsize, u32 refresh);
 
 #endif
arch/arm/include/asm/arch-mx5/sys_proto.h +1 -21
index b06c77f..16c9b76 100644
@@ -5,24 +5,4 @@
  * SPDX-License-Identifier:	GPL-2.0+
  */
 
-#ifndef _SYS_PROTO_H_
-#define _SYS_PROTO_H_
-
-#include "../arch-imx/cpu.h"
-
-#define is_soc_rev(rev)	((get_cpu_rev() & 0xFF) - rev)
-u32 get_cpu_rev(void);
-unsigned imx_ddr_size(void);
-void sdelay(unsigned long);
-void set_chipselect_size(int const);
-
-/*
- * Initializes on-chip ethernet controllers.
- * to override, implement board_eth_init()
- */
-
-int fecmxc_initialize(bd_t *bis);
-u32 get_ahb_clk(void);
-u32 get_periph_clk(void);
-
-#endif
+#include <asm/imx-common/sys_proto.h>
arch/arm/include/asm/arch-mx6/sys_proto.h +1 -44

48 lines not on this page · raw message

arch/arm/include/asm/arch-mxs/sys_proto.h +3 -12
index d6e9fdb..20ff101 100644
@@ -7,19 +7,10 @@
  * SPDX-License-Identifier:	GPL-2.0+
  */
 
-#ifndef __SYS_PROTO_H__
-#define __SYS_PROTO_H__
+#ifndef __MXS_SYS_PROTO_H__
+#define __MXS_SYS_PROTO_H__
 
-#include <asm/imx-common/regs-common.h>
-#include <../arch-imx/cpu.h>
-
-int mxs_reset_block(struct mxs_register_32 *reg);
-int mxs_wait_mask_set(struct mxs_register_32 *reg,
-		       uint32_t mask,
-		       unsigned int timeout);
-int mxs_wait_mask_clr(struct mxs_register_32 *reg,
-		       uint32_t mask,
-		       unsigned int timeout);
+#include <asm/imx-common/sys_proto.h>
 
 int mxsmmc_initialize(bd_t *bis, int id, int (*wp)(int), int (*cd)(int));
 
arch/arm/include/asm/imx-common/sys_proto.h new file +45 -0

45 lines not on this page · raw message

Signature · 1 line
1.8.4
#6 lore raw

PATCH 4/4 imx-common: consolidate macros and prototypes into sys_proto.h

Quoted 222 lines · Peng Fan

Move most macro definitions and prototypes into "arch/arm/include/asm/imx-common/sys_proto.h" to avoid duplicated function prototypes and marco definitions for different i.MX SoCs.

This patch do not remove the sys_proto.h for different i.MX SoCs, because we need to modify lots of driver code and others. This patch remove duplicated macros and prototypes and incude "sys_proto.h" of imx-common for each sys_proto.h of different i.MX platforms. Then later we should avoid add stuff in sys_proto.h of each platform, and modify driver to include common sys_proto.h.

Cc Stefano Babic <[email protected]>
---
 arch/arm/include/asm/arch-mx31/sys_proto.h  |  7 ++---
 arch/arm/include/asm/arch-mx35/sys_proto.h  | 12 ++++----
 arch/arm/include/asm/arch-mx5/sys_proto.h   | 22 +-------------
 arch/arm/include/asm/arch-mx6/sys_proto.h   | 45 +----------------------------
 arch/arm/include/asm/arch-mxs/sys_proto.h   | 15 ++--------
 arch/arm/include/asm/imx-common/sys_proto.h | 45 +++++++++++++++++++++++++++++
 6 files changed, 59 insertions(+), 87 deletions(-)
 create mode 100644 arch/arm/include/asm/imx-common/sys_proto.h
arch/arm/include/asm/arch-mx31/sys_proto.h +3 -4
index 1626442..674b25c 100644
@@ -5,10 +5,10 @@
  * SPDX-License-Identifier:	GPL-2.0+
  */
 
-#ifndef _SYS_PROTO_H_
-#define _SYS_PROTO_H_
+#ifndef _MX31_SYS_PROTO_H_
+#define _MX31_SYS_PROTO_H_
 
-#include "../arch-imx/cpu.h"
+#include <asm/imx-common/sys_proto.h>
 
 struct mxc_weimcs {
 	u32 upper;
@@ -18,5 +18,4 @@ struct mxc_weimcs {
 
 void mxc_setup_weimcs(int cs, const struct mxc_weimcs *weimcs);
 int mxc_mmc_init(bd_t *bis);
-u32 get_cpu_rev(void);
 #endif
arch/arm/include/asm/arch-mx35/sys_proto.h +6 -6
index 35c0352..0979fda 100644
@@ -5,12 +5,12 @@
  * SPDX-License-Identifier:	GPL-2.0+
  */
 
-#ifndef _SYS_PROTO_H_
-#define _SYS_PROTO_H_
+#ifndef _MX35_SYS_PROTO_H_
+#define _MX35_SYS_PROTO_H_
 
-u32 get_cpu_rev(void);
-void mx3_setup_sdram_bank(u32 start_address, u32 ddr2_config,
-	u32 row, u32 col, u32 dsize, u32 refresh);
-#define is_soc_rev(rev)	((get_cpu_rev() & 0xFF) - rev)
+#include <asm/imx-common/sys_proto.h>
+
+void mx3_setup_sdram_bank(u32 start_address, u32 ddr2_config, u32 row,
+			  u32 col, u32 dsize, u32 refresh);
 
 #endif
arch/arm/include/asm/arch-mx5/sys_proto.h +1 -21
index b06c77f..16c9b76 100644
@@ -5,24 +5,4 @@
  * SPDX-License-Identifier:	GPL-2.0+
  */
 
-#ifndef _SYS_PROTO_H_
-#define _SYS_PROTO_H_
-
-#include "../arch-imx/cpu.h"
-
-#define is_soc_rev(rev)	((get_cpu_rev() & 0xFF) - rev)
-u32 get_cpu_rev(void);
-unsigned imx_ddr_size(void);
-void sdelay(unsigned long);
-void set_chipselect_size(int const);
-
-/*
- * Initializes on-chip ethernet controllers.
- * to override, implement board_eth_init()
- */
-
-int fecmxc_initialize(bd_t *bis);
-u32 get_ahb_clk(void);
-u32 get_periph_clk(void);
-
-#endif
+#include <asm/imx-common/sys_proto.h>
arch/arm/include/asm/arch-mx6/sys_proto.h +1 -44
index eee8ca8..16c9b76 100644
@@ -5,47 +5,4 @@
  * SPDX-License-Identifier:	GPL-2.0+
  */
 
-#ifndef _SYS_PROTO_H_
-#define _SYS_PROTO_H_
-
-#include <asm/imx-common/regs-common.h>
-#include "../arch-imx/cpu.h"
-
-#define soc_rev() (get_cpu_rev() & 0xFF)
-#define is_soc_rev(rev) (soc_rev() == rev)
-
-u32 get_nr_cpus(void);
-u32 get_cpu_rev(void);
-u32 get_cpu_speed_grade_hz(void);
-u32 get_cpu_temp_grade(int *minc, int *maxc);
-
-/* returns MXC_CPU_ value */
-#define cpu_type(rev) (((rev) >> 12) & 0xff)
-
-/* both macros return/take MXC_CPU_ constants */
-#define get_cpu_type()	(cpu_type(get_cpu_rev()))
-#define is_cpu_type(cpu) (get_cpu_type() == cpu)
-
-const char *get_imx_type(u32 imxtype);
-unsigned imx_ddr_size(void);
-void set_chipselect_size(int const);
-
-#define is_mx6dqp() (is_cpu_type(MXC_CPU_MX6QP) || is_cpu_type(MXC_CPU_MX6DP))
-
-/*
- * Initializes on-chip ethernet controllers.
- * to override, implement board_eth_init()
- */
-
-int fecmxc_initialize(bd_t *bis);
-u32 get_ahb_clk(void);
-u32 get_periph_clk(void);
-
-int mxs_reset_block(struct mxs_register_32 *reg);
-int mxs_wait_mask_set(struct mxs_register_32 *reg,
-		       uint32_t mask,
-		       unsigned int timeout);
-int mxs_wait_mask_clr(struct mxs_register_32 *reg,
-		       uint32_t mask,
-		       unsigned int timeout);
-#endif
+#include <asm/imx-common/sys_proto.h>
arch/arm/include/asm/arch-mxs/sys_proto.h +3 -12
index d6e9fdb..20ff101 100644
@@ -7,19 +7,10 @@
  * SPDX-License-Identifier:	GPL-2.0+
  */
 
-#ifndef __SYS_PROTO_H__
-#define __SYS_PROTO_H__
+#ifndef __MXS_SYS_PROTO_H__
+#define __MXS_SYS_PROTO_H__
 
-#include <asm/imx-common/regs-common.h>
-#include <../arch-imx/cpu.h>
-
-int mxs_reset_block(struct mxs_register_32 *reg);
-int mxs_wait_mask_set(struct mxs_register_32 *reg,
-		       uint32_t mask,
-		       unsigned int timeout);
-int mxs_wait_mask_clr(struct mxs_register_32 *reg,
-		       uint32_t mask,
-		       unsigned int timeout);
+#include <asm/imx-common/sys_proto.h>
 
 int mxsmmc_initialize(bd_t *bis, int id, int (*wp)(int), int (*cd)(int));
 
arch/arm/include/asm/imx-common/sys_proto.h new file +35 -0
new file mode 100644
index 0000000..706bca0
@@ -0,0 +1,45 @@
+/*
+ * (C) Copyright 2009
+ * Stefano Babic, DENX Software Engineering, sbabic at denx.de.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef _SYS_PROTO_H_
+#define _SYS_PROTO_H_
+
+#include <asm/imx-common/regs-common.h>
+#include "../arch-imx/cpu.h"
+
+#define soc_rev() (get_cpu_rev() & 0xFF)
+#define is_soc_rev(rev) (soc_rev() == rev)
+
+/* returns MXC_CPU_ value */
+#define cpu_type(rev) (((rev) >> 12) & 0xff)
+/* both macros return/take MXC_CPU_ constants */
+#define get_cpu_type() (cpu_type(get_cpu_rev()))
+#define is_cpu_type(cpu) (get_cpu_type() == cpu)
+
+#define is_mx6dqp() (is_cpu_type(MXC_CPU_MX6QP) || is_cpu_type(MXC_CPU_MX6DP))
+
+u32 get_nr_cpus(void);
+u32 get_cpu_rev(void);
+u32 get_cpu_speed_grade_hz(void);
+u32 get_cpu_temp_grade(int *minc, int *maxc);
+const char *get_imx_type(u32 imxtype);
+u32 imx_ddr_size(void);
+void sdelay(unsigned long);
+void set_chipselect_size(int const);
+
+/*
+ * Initializes on-chip ethernet controllers.

arch/arm/include/asm/imx-common/sys_proto.h line 45

Quoted 10 lines
arch/arm/include/asm/imx-common/sys_proto.h new file +10 -0
+ * to override, implement board_eth_init()
+ */
+int fecmxc_initialize(bd_t *bis);
+u32 get_ahb_clk(void);
+u32 get_periph_clk(void);
+
+int mxs_reset_block(struct mxs_register_32 *reg);
+int mxs_wait_mask_set(struct mxs_register_32 *reg, u32 mask, u32 timeout);
+int mxs_wait_mask_clr(struct mxs_register_32 *reg, u32 mask, u32 timeout);
+#endif

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
#7 lore raw

PATCH 4/4 imx-common: consolidate macros and prototypes into sys_proto.h

In reply to Peng Fan

Hi Peng,

Quoted 13 lines · Peng Fan

Move most macro definitions and prototypes into "arch/arm/include/asm/imx-common/sys_proto.h" to avoid duplicated function prototypes and marco definitions for different i.MX SoCs.

This patch do not remove the sys_proto.h for different i.MX SoCs, because we need to modify lots of driver code and others. This patch remove duplicated macros and prototypes and incude "sys_proto.h" of imx-common for each sys_proto.h of different i.MX platforms. Then later we should avoid add stuff in sys_proto.h of each platform, and modify driver to include common sys_proto.h.

Cc Stefano Babic <[email protected]>
Quoted 10 lines
---
 arch/arm/include/asm/arch-mx31/sys_proto.h  |  7 ++---
 arch/arm/include/asm/arch-mx35/sys_proto.h  | 12 ++++----
 arch/arm/include/asm/arch-mx5/sys_proto.h   | 22 +-------------
 arch/arm/include/asm/arch-mx6/sys_proto.h   | 45 +----------------------------
 arch/arm/include/asm/arch-mxs/sys_proto.h   | 15 ++--------
 arch/arm/include/asm/imx-common/sys_proto.h | 45 +++++++++++++++++++++++++++++
 6 files changed, 59 insertions(+), 87 deletions(-)
 create mode 100644 arch/arm/include/asm/imx-common/sys_proto.h

This breaks MX35 boards:

+In file included from include/asm/arch/sys_proto.h:11:0,
+ from arch/arm/cpu/arm1136/mx35/mx35_sdram.c:11:
+arch/arm/include/asm/imx-common/sys_proto.h:38:23: error: unknown type name 'bd_t'

Reason is:

int fecmxc_initialize(bd_t *bis);

Can you check and resubmit ? Thanks !

Quoted 199 lines
arch/arm/include/asm/arch-mx31/sys_proto.h +3 -4
index 1626442..674b25c 100644
@@ -5,10 +5,10 @@
  * SPDX-License-Identifier:	GPL-2.0+
  */
 
-#ifndef _SYS_PROTO_H_
-#define _SYS_PROTO_H_
+#ifndef _MX31_SYS_PROTO_H_
+#define _MX31_SYS_PROTO_H_
 
-#include "../arch-imx/cpu.h"
+#include <asm/imx-common/sys_proto.h>
 
 struct mxc_weimcs {
 	u32 upper;
@@ -18,5 +18,4 @@ struct mxc_weimcs {
 
 void mxc_setup_weimcs(int cs, const struct mxc_weimcs *weimcs);
 int mxc_mmc_init(bd_t *bis);
-u32 get_cpu_rev(void);
 #endif
arch/arm/include/asm/arch-mx35/sys_proto.h +6 -6
index 35c0352..0979fda 100644
@@ -5,12 +5,12 @@
  * SPDX-License-Identifier:	GPL-2.0+
  */
 
-#ifndef _SYS_PROTO_H_
-#define _SYS_PROTO_H_
+#ifndef _MX35_SYS_PROTO_H_
+#define _MX35_SYS_PROTO_H_
 
-u32 get_cpu_rev(void);
-void mx3_setup_sdram_bank(u32 start_address, u32 ddr2_config,
-	u32 row, u32 col, u32 dsize, u32 refresh);
-#define is_soc_rev(rev)	((get_cpu_rev() & 0xFF) - rev)
+#include <asm/imx-common/sys_proto.h>
+
+void mx3_setup_sdram_bank(u32 start_address, u32 ddr2_config, u32 row,
+			  u32 col, u32 dsize, u32 refresh);
 
 #endif
arch/arm/include/asm/arch-mx5/sys_proto.h +1 -21
index b06c77f..16c9b76 100644
@@ -5,24 +5,4 @@
  * SPDX-License-Identifier:	GPL-2.0+
  */
 
-#ifndef _SYS_PROTO_H_
-#define _SYS_PROTO_H_
-
-#include "../arch-imx/cpu.h"
-
-#define is_soc_rev(rev)	((get_cpu_rev() & 0xFF) - rev)
-u32 get_cpu_rev(void);
-unsigned imx_ddr_size(void);
-void sdelay(unsigned long);
-void set_chipselect_size(int const);
-
-/*
- * Initializes on-chip ethernet controllers.
- * to override, implement board_eth_init()
- */
-
-int fecmxc_initialize(bd_t *bis);
-u32 get_ahb_clk(void);
-u32 get_periph_clk(void);
-
-#endif
+#include <asm/imx-common/sys_proto.h>
arch/arm/include/asm/arch-mx6/sys_proto.h +1 -44
index eee8ca8..16c9b76 100644
@@ -5,47 +5,4 @@
  * SPDX-License-Identifier:	GPL-2.0+
  */
 
-#ifndef _SYS_PROTO_H_
-#define _SYS_PROTO_H_
-
-#include <asm/imx-common/regs-common.h>
-#include "../arch-imx/cpu.h"
-
-#define soc_rev() (get_cpu_rev() & 0xFF)
-#define is_soc_rev(rev) (soc_rev() == rev)
-
-u32 get_nr_cpus(void);
-u32 get_cpu_rev(void);
-u32 get_cpu_speed_grade_hz(void);
-u32 get_cpu_temp_grade(int *minc, int *maxc);
-
-/* returns MXC_CPU_ value */
-#define cpu_type(rev) (((rev) >> 12) & 0xff)
-
-/* both macros return/take MXC_CPU_ constants */
-#define get_cpu_type()	(cpu_type(get_cpu_rev()))
-#define is_cpu_type(cpu) (get_cpu_type() == cpu)
-
-const char *get_imx_type(u32 imxtype);
-unsigned imx_ddr_size(void);
-void set_chipselect_size(int const);
-
-#define is_mx6dqp() (is_cpu_type(MXC_CPU_MX6QP) || is_cpu_type(MXC_CPU_MX6DP))
-
-/*
- * Initializes on-chip ethernet controllers.
- * to override, implement board_eth_init()
- */
-
-int fecmxc_initialize(bd_t *bis);
-u32 get_ahb_clk(void);
-u32 get_periph_clk(void);
-
-int mxs_reset_block(struct mxs_register_32 *reg);
-int mxs_wait_mask_set(struct mxs_register_32 *reg,
-		       uint32_t mask,
-		       unsigned int timeout);
-int mxs_wait_mask_clr(struct mxs_register_32 *reg,
-		       uint32_t mask,
-		       unsigned int timeout);
-#endif
+#include <asm/imx-common/sys_proto.h>
arch/arm/include/asm/arch-mxs/sys_proto.h +3 -12
index d6e9fdb..20ff101 100644
@@ -7,19 +7,10 @@
  * SPDX-License-Identifier:	GPL-2.0+
  */
 
-#ifndef __SYS_PROTO_H__
-#define __SYS_PROTO_H__
+#ifndef __MXS_SYS_PROTO_H__
+#define __MXS_SYS_PROTO_H__
 
-#include <asm/imx-common/regs-common.h>
-#include <../arch-imx/cpu.h>
-
-int mxs_reset_block(struct mxs_register_32 *reg);
-int mxs_wait_mask_set(struct mxs_register_32 *reg,
-		       uint32_t mask,
-		       unsigned int timeout);
-int mxs_wait_mask_clr(struct mxs_register_32 *reg,
-		       uint32_t mask,
-		       unsigned int timeout);
+#include <asm/imx-common/sys_proto.h>
 
 int mxsmmc_initialize(bd_t *bis, int id, int (*wp)(int), int (*cd)(int));
 
arch/arm/include/asm/imx-common/sys_proto.h new file +35 -0
new file mode 100644
index 0000000..706bca0
@@ -0,0 +1,45 @@
+/*
+ * (C) Copyright 2009
+ * Stefano Babic, DENX Software Engineering, sbabic at denx.de.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef _SYS_PROTO_H_
+#define _SYS_PROTO_H_
+
+#include <asm/imx-common/regs-common.h>
+#include "../arch-imx/cpu.h"
+
+#define soc_rev() (get_cpu_rev() & 0xFF)
+#define is_soc_rev(rev) (soc_rev() == rev)
+
+/* returns MXC_CPU_ value */
+#define cpu_type(rev) (((rev) >> 12) & 0xff)
+/* both macros return/take MXC_CPU_ constants */
+#define get_cpu_type() (cpu_type(get_cpu_rev()))
+#define is_cpu_type(cpu) (get_cpu_type() == cpu)
+
+#define is_mx6dqp() (is_cpu_type(MXC_CPU_MX6QP) || is_cpu_type(MXC_CPU_MX6DP))
+
+u32 get_nr_cpus(void);
+u32 get_cpu_rev(void);
+u32 get_cpu_speed_grade_hz(void);
+u32 get_cpu_temp_grade(int *minc, int *maxc);
+const char *get_imx_type(u32 imxtype);
+u32 imx_ddr_size(void);
+void sdelay(unsigned long);
+void set_chipselect_size(int const);
+
+/*
+ * Initializes on-chip ethernet controllers.

arch/arm/include/asm/imx-common/sys_proto.h line 45

Quoted 10 lines
arch/arm/include/asm/imx-common/sys_proto.h new file +10 -0
+ * to override, implement board_eth_init()
+ */
+int fecmxc_initialize(bd_t *bis);
+u32 get_ahb_clk(void);
+u32 get_periph_clk(void);
+
+int mxs_reset_block(struct mxs_register_32 *reg);
+int mxs_wait_mask_set(struct mxs_register_32 *reg, u32 mask, u32 timeout);
+int mxs_wait_mask_clr(struct mxs_register_32 *reg, u32 mask, u32 timeout);
+#endif

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
#8 lore raw

PATCH 4/4 imx-common: consolidate macros and prototypes into sys_proto.h

Hi Stefano,

Quoted 34 lines · Stefano Babic

Hi Peng,

Quoted 13 lines · Peng Fan

Move most macro definitions and prototypes into "arch/arm/include/asm/imx-common/sys_proto.h" to avoid duplicated function prototypes and marco definitions for different i.MX SoCs.

This patch do not remove the sys_proto.h for different i.MX SoCs, because we need to modify lots of driver code and others. This patch remove duplicated macros and prototypes and incude "sys_proto.h" of imx-common for each sys_proto.h of different i.MX platforms. Then later we should avoid add stuff in sys_proto.h of each platform, and modify driver to include common sys_proto.h.

Cc Stefano Babic <[email protected]>
Quoted 10 lines
---
 arch/arm/include/asm/arch-mx31/sys_proto.h  |  7 ++---
 arch/arm/include/asm/arch-mx35/sys_proto.h  | 12 ++++----
 arch/arm/include/asm/arch-mx5/sys_proto.h   | 22 +-------------
 arch/arm/include/asm/arch-mx6/sys_proto.h   | 45 +----------------------------
 arch/arm/include/asm/arch-mxs/sys_proto.h   | 15 ++--------
 arch/arm/include/asm/imx-common/sys_proto.h | 45 +++++++++++++++++++++++++++++
 6 files changed, 59 insertions(+), 87 deletions(-)
 create mode 100644 arch/arm/include/asm/imx-common/sys_proto.h

This breaks MX35 boards:

(quoted diff) +3 -0
+In file included from include/asm/arch/sys_proto.h:11:0,
+                 from arch/arm/cpu/arm1136/mx35/mx35_sdram.c:11:
+arch/arm/include/asm/imx-common/sys_proto.h:38:23: error: unknown type

name 'bd_t'

Quoted 5 lines

Reason is:

int fecmxc_initialize(bd_t *bis);

Can you check and resubmit ? Thanks !

Oh. I'll check this. I missed to build mx35 target.

[...]

Regards,
Peng.

#9 lore raw

PATCH 1/4 imx: add cpu type for i.MX2 and i.MX3

In reply to Peng Fan
Quoted 15 lines · Peng Fan

Add cpu types for i.MX2/3.

Cc Stefano Babic <[email protected]>
---
 arch/arm/include/asm/arch-imx/cpu.h | 5 +++++
 1 file changed, 5 insertions(+)
arch/arm/include/asm/arch-imx/cpu.h +0 -0
index c7f9fff..71208aa 100644
@@ -4,6 +4,11 @@
  * SPDX-License-Identifier:	GPL-2.0+

arch/arm/include/asm/arch-imx/cpu.h line 14

Quoted 10 lines
arch/arm/include/asm/arch-imx/cpu.h +5 -0
  */
 
+#define MXC_CPU_MX23		0x23
+#define MXC_CPU_MX25		0x25
+#define MXC_CPU_MX28		0x28
+#define MXC_CPU_MX31		0x31
+#define MXC_CPU_MX35		0x35
 #define MXC_CPU_MX51		0x51
 #define MXC_CPU_MX53		0x53
 #define MXC_CPU_MX6SL		0x60

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================