Skip to contentSkip to conversation

dm: pmic: max77686: Correct two typos in a comment

PATCH New Simon Glass 2 participants 2 messages Aug 9, 2015 – Aug 12, 2015

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 dm: pmic: max77686: Correct two typos in a comment

These were pointed out in review but I missed them.

---

 drivers/power/regulator/max77686.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/power/regulator/max77686.c +2 -2
index 946b87c..56ecbc1 100644
@@ -87,8 +87,8 @@ static int max77686_buck_volt2hex(int buck, int uV)
 		 * hex = (uV - 750000) / 50000. We assume that dynamic voltage
 		 * scaling via GPIOs is not enabled and don't support that.
 		 * If this is enabled then the driver will need to take that
-		 * into account anrd check different registers depending on
-		 * the current setting See the datasheet for details.
+		 * into account and check different registers depending on
+		 * the current setting. See the datasheet for details.
 		 */
 		hex = (uV - MAX77686_BUCK_UV_HMIN) / MAX77686_BUCK_UV_HSTEP;
 		hex_max = MAX77686_BUCK_VOLT_MAX_HEX;
Signature · 1 line
2.5.0.rc2.392.g76e840b
#1 lore raw

PATCH 1/1 dm: pmic: max77686: Correct two typos in a comment

Hello Simon,

Quoted 14 lines · Simon Glass

These were pointed out in review but I missed them.

---

  drivers/power/regulator/max77686.c | 4 ++--
  1 file changed, 2 insertions(+), 2 deletions(-)
drivers/power/regulator/max77686.c +0 -0
index 946b87c..56ecbc1 100644

drivers/power/regulator/max77686.c static int max77686_buck_volt2hex(int buck, int uV) · line 94

Quoted 10 lines
drivers/power/regulator/max77686.c +2 -2
@@ -87,8 +87,8 @@ static int max77686_buck_volt2hex(int buck, int uV)
  		 * hex = (uV - 750000) / 50000. We assume that dynamic voltage
  		 * scaling via GPIOs is not enabled and don't support that.
  		 * If this is enabled then the driver will need to take that
-		 * into account anrd check different registers depending on
-		 * the current setting See the datasheet for details.
+		 * into account and check different registers depending on
+		 * the current setting. See the datasheet for details.
  		 */
  		hex = (uV - MAX77686_BUCK_UV_HMIN) / MAX77686_BUCK_UV_HSTEP;
  		hex_max = MAX77686_BUCK_VOLT_MAX_HEX;

Applied to: u-boot-pmic.

Best regards,

Signature · 4 lines
Przemyslaw Marczak
Samsung R&D Institute Poland
Samsung Electronics
p.marczak at samsung.com