Skip to contentSkip to conversation

zynq: enable CONFIG_NET_RANDOM_ETHADDR

PATCH New Masahiro Yamada 3 participants 3 messages Jul 17, 2015 – Aug 12, 2015 Arm/Zynq architecture

lore
Share & tools
lore

Masahiro Yamada

author
#0 lore raw

PATCH 1/1 zynq: enable CONFIG_NET_RANDOM_ETHADDR

We have to set a MAC address to use network.
Otherwise, the tftpboot command fails with the following message:

Gem.e000b000 Waiting for PHY auto negotiation to complete........ done *** ERROR: `ethaddr' not set

Since commit 92ac52082140 ("net: Remove all references to CONFIG_ETHADDR and friends"), we can not use CONFIG_ETHADDR.

The easiest way to set a MAC address is to enable
CONFIG_NET_RANDOM_ETHADDR.

Signed-off-by Masahiro Yamada <[email protected]>

---

 configs/zynq_microzed_defconfig    | 1 +
 configs/zynq_picozed_defconfig     | 1 +
 configs/zynq_zc702_defconfig       | 1 +
 configs/zynq_zc706_defconfig       | 1 +
 configs/zynq_zc70x_defconfig       | 1 +
 configs/zynq_zc770_xm010_defconfig | 1 +
 configs/zynq_zc770_xm012_defconfig | 1 +
 configs/zynq_zc770_xm013_defconfig | 1 +
 configs/zynq_zed_defconfig         | 1 +
 configs/zynq_zybo_defconfig        | 1 +
 10 files changed, 10 insertions(+)
configs/zynq_microzed_defconfig +1 -0
index c878924..7914222 100644
@@ -10,3 +10,4 @@ CONFIG_FIT_SIGNATURE=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_SETEXPR is not set
+CONFIG_NET_RANDOM_ETHADDR=y
configs/zynq_picozed_defconfig +1 -0
index af77a9d..a10bc85 100644
@@ -6,3 +6,4 @@ CONFIG_SPL=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_SETEXPR is not set
+CONFIG_NET_RANDOM_ETHADDR=y
configs/zynq_zc702_defconfig +1 -0
index 5dde452..53b03ca 100644
@@ -10,3 +10,4 @@ CONFIG_FIT_SIGNATURE=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_SETEXPR is not set
+CONFIG_NET_RANDOM_ETHADDR=y
configs/zynq_zc706_defconfig +1 -0
index 0f96d16..657af84 100644
@@ -10,3 +10,4 @@ CONFIG_FIT_SIGNATURE=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_SETEXPR is not set
+CONFIG_NET_RANDOM_ETHADDR=y
configs/zynq_zc70x_defconfig +1 -0
index 525c538..6358146 100644
@@ -10,3 +10,4 @@ CONFIG_FIT_SIGNATURE=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_SETEXPR is not set
+CONFIG_NET_RANDOM_ETHADDR=y
configs/zynq_zc770_xm010_defconfig +1 -0
index f1fc283..6d2e4d4 100644
@@ -11,4 +11,5 @@ CONFIG_SYS_EXTRA_OPTIONS="ZC770_XM010"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_SETEXPR is not set
+CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_SPI_FLASH=y
configs/zynq_zc770_xm012_defconfig +1 -0
index 73ed13d..5968c52 100644
@@ -9,3 +9,4 @@ CONFIG_FIT_VERBOSE=y
 CONFIG_FIT_SIGNATURE=y
 CONFIG_SYS_EXTRA_OPTIONS="ZC770_XM012"
 # CONFIG_CMD_SETEXPR is not set
+CONFIG_NET_RANDOM_ETHADDR=y
configs/zynq_zc770_xm013_defconfig +1 -0
index 211a41d..198e000 100644
@@ -11,3 +11,4 @@ CONFIG_SYS_EXTRA_OPTIONS="ZC770_XM013"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_SETEXPR is not set
+CONFIG_NET_RANDOM_ETHADDR=y
configs/zynq_zed_defconfig +1 -0
index f3c63f9..4a98646 100644
@@ -10,3 +10,4 @@ CONFIG_FIT_SIGNATURE=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_SETEXPR is not set
+CONFIG_NET_RANDOM_ETHADDR=y
configs/zynq_zybo_defconfig +1 -0
index 0c6117d..c9073d5 100644
@@ -10,3 +10,4 @@ CONFIG_FIT_SIGNATURE=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_SETEXPR is not set
+CONFIG_NET_RANDOM_ETHADDR=y
Signature · 1 line
1.9.1
#1 lore raw

PATCH 1/1 zynq: enable CONFIG_NET_RANDOM_ETHADDR

Hi Masahiro,

Quoted 6 lines · Masahiro Yamada

We have to set a MAC address to use network.
Otherwise, the tftpboot command fails with the following message:

Gem.e000b000 Waiting for PHY auto negotiation to complete........ done *** ERROR: `ethaddr' not set

Quoted 7 lines

Since commit 92ac52082140 ("net: Remove all references to CONFIG_ETHADDR and friends"), we can not use CONFIG_ETHADDR.

The easiest way to set a MAC address is to enable
CONFIG_NET_RANDOM_ETHADDR.

Signed-off-by Masahiro Yamada <[email protected]>
Acked-by Joe Hershberger <[email protected]>
Applied
#2 lore raw

PATCH 1/1 zynq: enable CONFIG_NET_RANDOM_ETHADDR

Quoted 13 lines · Joe Hershberger

Hi Masahiro,

Quoted 9 lines · Masahiro Yamada

We have to set a MAC address to use network.
Otherwise, the tftpboot command fails with the following message:

Gem.e000b000 Waiting for PHY auto negotiation to complete........ done *** ERROR: `ethaddr' not set

Since commit 92ac52082140 ("net: Remove all references to CONFIG_ETHADDR and friends"), we can not use CONFIG_ETHADDR.

Quoted 6 lines
Quoted 4 lines

The easiest way to set a MAC address is to enable
CONFIG_NET_RANDOM_ETHADDR.

Signed-off-by Masahiro Yamada <[email protected]>
Acked-by Joe Hershberger <[email protected]>

Applied.

Thanks,
Michal

Signature · 14 lines
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform


-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150812/a59cf918/attachment.sig>