staging: iio: hmc5843: Set iio name dynamically
Subsystems (3)
PATCH v2 1/1 staging: iio: hmc5843: Set iio name dynamically
From: Yong Li <[email protected]>
Load the driver using the below command:
echo hmc5983 0x1e > /sys/bus/i2c/devices/i2c-?/new_device
In sysfs, the iio name is hmc5843, however the i2c name is hmc5983, they are inconsistent.
With this patch, the iio name will be the same as the i2c device name
--- drivers/staging/iio/magnetometer/hmc5843.h | 2 +- drivers/staging/iio/magnetometer/hmc5843_core.c | 4 ++-- drivers/staging/iio/magnetometer/hmc5843_i2c.c | 2 +- drivers/staging/iio/magnetometer/hmc5843_spi.c | 3 ++- 4 files changed, 6 insertions(+), 5 deletions(-)
drivers/staging/iio/magnetometer/hmc5843.h +1 -1
@@ -48,7 +48,7 @@ struct hmc5843_data { };int hmc5843_common_probe (struct device *dev,struct regmap *regmap, -enum hmc5843_ids id); +enum hmc5843_ids id,const char *name);int hmc5843_common_remove (struct device *dev);int hmc5843_common_suspend (struct device *dev);
drivers/staging/iio/magnetometer/hmc5843_core.c +2 -2
@@ -577,7 +577,7 @@ int hmc5843_common_resume(struct device *dev)EXPORT_SYMBOL (hmc5843_common_resume);int hmc5843_common_probe (struct device *dev,struct regmap *regmap, -enum hmc5843_ids id) +enum hmc5843_ids id,const char *name) {struct hmc5843_data *data;struct iio_dev *indio_dev;
@@ -597,7 +597,7 @@ int hmc5843_common_probe(struct device *dev, struct regmap *regmap,mutex_init (&data->lock); indio_dev->dev.parent = dev; - indio_dev->name = dev->driver->name; + indio_dev->name = name; indio_dev->info = &hmc5843_info; indio_dev->modes =INDIO_DIRECT_MODE ; indio_dev->channels = data->variant->channels;
drivers/staging/iio/magnetometer/hmc5843_i2c.c +1 -1
@@ -61,7 +61,7 @@ static int hmc5843_i2c_probe(struct i2c_client *cli, {return hmc5843_common_probe (&cli->dev,devm_regmap_init_i2c (cli, &hmc5843_i2c_regmap_config), - id->driver_data); + id->driver_data, id->name); }static int hmc5843_i2c_remove (struct i2c_client *client)
drivers/staging/iio/magnetometer/hmc5843_spi.c +2 -1
@@ -59,6 +59,7 @@ static const struct regmap_config hmc5843_spi_regmap_config = {static int hmc5843_spi_probe (struct spi_device *spi) {int ret; +const struct spi_device_id *id =spi_get_device_id (spi); spi->mode =SPI_MODE_3 ; spi->max_speed_hz =8000000 ;
@@ -69,7 +70,7 @@ static int hmc5843_spi_probe(struct spi_device *spi)return hmc5843_common_probe (&spi->dev,devm_regmap_init_spi (spi, &hmc5843_spi_regmap_config), -HMC5983_ID ); + id->driver_data, id->name); }static int hmc5843_spi_remove (struct spi_device *spi)
Signature · 1 line
2.1.0
Quoted 11 lines · On 08/12/2015 03:25 PM, [email protected] wrote:
From: Yong Li <[email protected]>
Load the driver using the below command:
echo hmc59830x1e> /sys/bus/i2c/devices/i2c-?/new_deviceIn sysfs, the iio name is hmc5843, however the i2c name is hmc5983, they are inconsistent.
With this patch, the iio name will be the same as the i2c device name
Signed-off-by Yong Li <[email protected]>
Looks good.
Jonathan Cameron
maintainerQuoted 9 lines · Lars-Peter Clausen
Quoted 8 lines · On 08/12/2015 03:25 PM, [email protected] wrote:
From: Yong Li <[email protected]>
Load the driver using the below command:
echo hmc59830x1e> /sys/bus/i2c/devices/i2c-?/new_deviceIn sysfs, the iio name is hmc5843, however the i2c name is hmc5983, they are inconsistent.
Quoted 7 lines
Quoted 3 lines
With this patch, the iio name will be the same as the i2c device name
Signed-off-by Yong Li <[email protected]>Looks good.
Reviewed-by Lars-Peter Clausen <[email protected]>
Applied to the togreg branch of iio.git - initially pushed out as testing for the autobuilders to play with it.
Thanks,
Jonathan
Quoted 5 lines
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html