taurus: board updates
PATCH v2 1/1 taurus: board updates
taurus changes:
- rename at91_spl_board_init to spl_board_init fixes problems with recovery button and nand erase sector 0
- adapt CONFIG_SPL_MAX_SIZE and CONFIG_SPL_BSS_MAX_SIZE
- add CONFIG_AT91_HW_WDT_TIMEOUT 15
- CONFIG_SF_DEFAULT_MODE SPI_MODE_3 not mode 0
---
Changes in v2:
- add comments from Andreas Biessmann:
- rebase to 0d339cf9a969f0c249713d3697e735184f1bd955
board/siemens/taurus/taurus.c | 6 +++--- include/configs/taurus.h | 9 +++++---- 2 files changed, 8 insertions(+), 7 deletions(-)
board/siemens/taurus/taurus.c +3 -3
@@ -99,7 +99,7 @@ static int at91_is_recovery(void) }#endif -void at91_spl_board_init (void ) +void spl_board_init (void ) {taurus_nand_hw_init ();at91_spi0_hw_init (TAURUS_SPI_MASK );
@@ -124,13 +124,13 @@ void at91_spl_board_init(void)if (at91_is_recovery () ==1 ) {struct spi_flash *flash; -debug ("Recovery button pressed\n" ); +puts ("Recovery button pressed\n" );nand_init ();spl_nand_erase_one (0 ,0 ); flash =spi_flash_probe (CONFIG_SF_DEFAULT_BUS ,0 ,CONFIG_SF_DEFAULT_SPEED , -SPI_MODE_3 ); +CONFIG_SF_DEFAULT_MODE );if (!flash) {puts ("no flash\n" ); }else {
include/configs/taurus.h +5 -4
@@ -87,7 +87,7 @@* leaving the correct space for initial global data structure above * that address while providing maximum stack area below. */ -# define CONFIG_SYS_INIT_SP_ADDR \ +#define CONFIG_SYS_INIT_SP_ADDR \ (ATMEL_BASE_SRAM1 + 0x1000 - GENERATED_GBL_DATA_SIZE)/* NAND flash */
@@ -111,6 +111,7 @@#define CONFIG_AT91_WANTS_COMMON_PHY #define CONFIG_AT91SAM9_WATCHDOG +#define CONFIG_AT91_HW_WDT_TIMEOUT 15#if !defined(CONFIG_SPL_BUILD )/* Enable the watchdog */ #define CONFIG_HW_WATCHDOG
@@ -145,8 +146,8 @@#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000#define CONFIG_SF_DEFAULT_BUS 0 -#define CONFIG_SF_DEFAULT_SPEED 10000000 -#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 +#define CONFIG_SF_DEFAULT_SPEED 1000000 +#define CONFIG_SF_DEFAULT_MODE SPI_MODE_3#endif /* load address */
@@ -252,7 +253,7 @@#define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN#define CONFIG_SPL_BSS_START_ADDR CONFIG_SPL_MAX_SIZE -#define CONFIG_SPL_BSS_MAX_SIZE (3 * 1024) +#define CONFIG_SPL_BSS_MAX_SIZE (3 * 512)#define CONFIG_SPL_LIBCOMMON_SUPPORT #define CONFIG_SPL_LIBGENERIC_SUPPORT
Signature · 1 line
2.1.0
PATCH v2 1/1 taurus: board updates
Dear Heiko Schocher,
Quoted 10 lines · Heiko Schocher
taurus changes:
- renameat91_spl_board_inittospl_board_initfixes problems with recovery button and nand erase sector 0
- adaptCONFIG_SPL_MAX_SIZEandCONFIG_SPL_BSS_MAX_SIZE
- addCONFIG_AT91_HW_WDT_TIMEOUT15
-CONFIG_SF_DEFAULT_MODESPI_MODE_3not mode 0Signed-off-by Heiko Schocher <[email protected]>---
Quoted 7 lines
Changes in v2:
- add comments from Andreas Biessmann:
- rebase to0d339cf9a969f0c249713d3697e735184f1bd955
board/siemens/taurus/taurus.c| 6 +++---include/configs/taurus.h| 9 +++++----2 files changed, 8 insertions(+), 7 deletions(-)
applied to u-boot-atmel/master, thanks!
Best regards,
Andreas Bie?mann
PATCH v2 1/1 taurus: board updates
Hi Heiko,
Quoted 17 lines · Andreas Bie?mann
Dear Heiko Schocher,
Quoted 14 lines · Heiko Schocher
taurus changes:
- renameat91_spl_board_inittospl_board_initfixes problems with recovery button and nand erase sector 0
- adaptCONFIG_SPL_MAX_SIZEandCONFIG_SPL_BSS_MAX_SIZE
- addCONFIG_AT91_HW_WDT_TIMEOUT15
-CONFIG_SF_DEFAULT_MODESPI_MODE_3not mode 0Signed-off-by Heiko Schocher <[email protected]>---
Changes in v2:
- add comments from Andreas Biessmann:
- rebase to0d339cf9a969f0c249713d3697e735184f1bd955
Quoted 5 lines
Quoted 3 lines
board/siemens/taurus/taurus.c| 6 +++---include/configs/taurus.h| 9 +++++----2 files changed, 8 insertions(+), 7 deletions(-)applied to u-boot-atmel/master, thanks!
sorry for the rash (automated) accepted mail. Please rebase onto fixed 'add axm extensions'
Andreas
Quoted 4 lines
Best regards,
Andreas Bie?mann