spi: s3c64xx: replace clock disabling with runtime PM suspend call in remove function
Subsystems (3)
PATCH RESEND v2 4/4 spi: s3c64xx: replace clock disabling with runtime PM suspend call in remove function
Simplify s3c64xx_spi_remove by replacing the clock disabling with calling runtime PM suspend which does the same.
Waking up the device if it was suspended wouldn't be strictly needed for this driver but using pm_runtime_get_sync is cleaner and makes s3c64xx_spi_remove more consistent with the runtime PM handling in s3c64xx_spi_setup.
pm_runtime_force_suspend does most of the work for us:
disabling the clocks, disabling runtime PM and setting it to "suspended" state.
---
Changed:
- Added to the patch set
v2:
- Don't use runtime_pm_force_suspend. Technically it works but it's not intuitive as we don't intend to suspend here.
drivers/spi/spi-s3c64xx.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
drivers/spi/spi-s3c64xx.c +5 -1
@@ -1225,7 +1225,7 @@ static int s3c64xx_spi_remove(struct platform_device *pdev)struct spi_master *master =spi_master_get (platform_get_drvdata (pdev));struct s3c64xx_spi_driver_data *sdd =spi_master_get_devdata (master); -pm_runtime_disable (&pdev->dev); +pm_runtime_get_sync (&pdev->dev);writel (0 , sdd->regs +S3C64XX_SPI_INT_EN );
@@ -1233,6 +1233,10 @@ static int s3c64xx_spi_remove(struct platform_device *pdev)clk_disable_unprepare (sdd->clk); +pm_runtime_put_noidle (&pdev->dev); +pm_runtime_disable (&pdev->dev); +pm_runtime_set_suspended (&pdev->dev); +return 0 ; }
Signature · 1 line
2.5.0
A message that is not in the archive (sent off-list or not yet received): [email protected]
Krzysztof Kozlowski
Reviewed-byW dniu 22.08.2015 o 02:35, Heiner Kallweit pisze:
Quoted 19 lines
Simplify
s3c64xx_spi_removeby replacing the clock disabling with calling runtime PM suspend which does the same.
Waking up the device if it was suspended wouldn't be strictly needed for this driver but usingpm_runtime_get_syncis cleaner and makess3c64xx_spi_removemore consistent with the runtime PM handling ins3c64xx_spi_setup.
pm_runtime_force_suspenddoes most of the work for us:
disabling the clocks, disabling runtime PM and setting it to "suspended" state.Signed-off-by Heiner Kallweit <[email protected]>---
Changed:
- Added to the patch set
v2:
- Don't useruntime_pm_force_suspend. Technically it works but it's not intuitive as we don't intend to suspend here.
Quoted 2 lines
drivers/spi/spi-s3c64xx.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
Best regards,
Krzysztof
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Applied "spi: s3c64xx: replace clock disabling with runtime PM suspend call in remove function" to the spi tree
In reply to a message not in the archiveThe patch
spi: s3c64xx: replace clock disabling with runtime PM suspend call in remove function
has been applied to the spi tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark
Quoted 1 line
From
8ebe9d163e93e10458f3fd7522f29f9149e58632Mon Sep 17 00:00:00 2001
From: Heiner Kallweit <[email protected]>
Date: Thu, 3 Sep 2015 22:40:53 +0200
Subject: [PATCH] spi: s3c64xx: replace clock disabling with runtime PM suspend
call in remove function
Simplify s3c64xx_spi_remove by replacing the clock disabling with calling runtime PM suspend which does the same.
Waking up the device if it was suspended wouldn't be strictly needed for this driver but using pm_runtime_get_sync is cleaner and makes s3c64xx_spi_remove more consistent with the runtime PM handling in s3c64xx_spi_setup.
pm_runtime_force_suspend does most of the work for us:
disabling the clocks, disabling runtime PM and setting it to "suspended" state.
--- drivers/spi/spi-s3c64xx.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
drivers/spi/spi-s3c64xx.c +5 -1
@@ -1225,7 +1225,7 @@ static int s3c64xx_spi_remove(struct platform_device *pdev)struct spi_master *master =spi_master_get (platform_get_drvdata (pdev));struct s3c64xx_spi_driver_data *sdd =spi_master_get_devdata (master); -pm_runtime_disable (&pdev->dev); +pm_runtime_get_sync (&pdev->dev);writel (0 , sdd->regs +S3C64XX_SPI_INT_EN );
@@ -1233,6 +1233,10 @@ static int s3c64xx_spi_remove(struct platform_device *pdev)clk_disable_unprepare (sdd->clk); +pm_runtime_put_noidle (&pdev->dev); +pm_runtime_disable (&pdev->dev); +pm_runtime_set_suspended (&pdev->dev); +return 0 ; }
Signature · 6 lines
2.5.0 -- To unsubscribe from this list: send the line "unsubscribe linux-spi" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html