tbs2910: use full name in Kconfig board selection
PATCH 1/3 tbs2910: use full name in Kconfig board selection
---
Cc: Stefano Babic <[email protected]>
--- arch/arm/cpu/armv7/mx6/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/cpu/armv7/mx6/Kconfig +1 -1
@@ -129,7 +129,7 @@ config TARGET_SECOMX6 bool "secomx6 boards" config TARGET_TBS2910 - bool "tbs2910" + bool "TBS2910 Matrix ARM mini PC" select CPU_V7 config TARGET_TITANIUM
Signature · 1 line
1.9.1
PATCH 1/3 tbs2910: use full name in Kconfig board selection
Quoted 12 lines · Soeren Moch
Signed-off-by Soeren Moch <[email protected]>---
Cc: Stefano Babic <[email protected]>--- arch/arm/cpu/armv7/mx6/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)arch/arm/cpu/armv7/mx6/Kconfig +0
-0
arch/arm/cpu/armv7/mx6/Kconfig config TARGET_SECOMX6 · line 135
Quoted 8 lines
arch/arm/cpu/armv7/mx6/Kconfig +1
-1@@ -129,7 +129,7 @@ config TARGET_SECOMX6 bool "secomx6 boards" config TARGET_TBS2910 - bool "tbs2910" + bool "TBS2910 Matrix ARM mini PC" select CPU_V7 config TARGET_TITANIUM
Stefano,
this patch series seems to be assigned to Tom in patchwork, but I think this should go through u-boot-imx. Can you pick up this series, please?
Thanks,
Soeren
PATCH 1/3 tbs2910: use full name in Kconfig board selection
Quoted 23 lines · Soeren Moch
Quoted 13 lines · Soeren Moch
Signed-off-by Soeren Moch <[email protected]>---
Cc: Stefano Babic <[email protected]>--- arch/arm/cpu/armv7/mx6/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)arch/arm/cpu/armv7/mx6/Kconfig +0
-0arch/arm/cpu/armv7/mx6/Kconfig config TARGET_SECOMX6 · line 133
Quoted 6 lines
arch/arm/cpu/armv7/mx6/Kconfig +1
-1@@ -129,7 +129,7 @@ config TARGET_SECOMX6 bool "secomx6 boards" config TARGET_TBS2910 - bool "tbs2910" + bool "TBS2910 Matrix ARM mini PC" select CPU_V7 config TARGET_TITANIUMStefano,
Quoted 3 lines
this patch series seems to be assigned to Tom in patchwork, but I think this should go through u-boot-imx. Can you pick up this series, please?
Applied to u-boot-imx, thanks!
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================
PATCH 2/3 tbs2910: remove deprecated CONFIG_SYS_EXTRA_OPTIONS
In reply to Soeren Mochmove options from CONFIG_SYS_EXTRA_OPTIONS to board specific Kconfig
---
Cc: Stefano Babic <[email protected]>
--- board/tbs/tbs2910/Kconfig | 6 ++++++ configs/tbs2910_defconfig | 1 - 2 files changed, 6 insertions(+), 1 deletion(-)
board/tbs/tbs2910/Kconfig +6 -0
@@ -12,4 +12,10 @@ config SYS_SOC config SYS_CONFIG_NAME default "tbs2910" +config MX6Q + default y + +config IMX_CONFIG + default "board/boundary/nitrogen6x/nitrogen6q2g.cfg" + endif
configs/tbs2910_defconfig +0 -1
@@ -1,7 +1,6 @@ CONFIG_ARM=y CONFIG_ARCH_MX6=y CONFIG_TARGET_TBS2910=y -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6q2g.cfg,MX6Q" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set CONFIG_DM=y
Signature · 1 line
1.9.1
PATCH 3/3 tbs2910: remove SYS_SOC from board specific Kconfig
In reply to Soeren MochSYS_SOC is already defined in arch/arm/cpu/armv7/mx6/Kconfig, no need to define it again
---
Cc: Stefano Babic <[email protected]>
--- board/tbs/tbs2910/Kconfig | 3 --- 1 file changed, 3 deletions(-)
board/tbs/tbs2910/Kconfig +0 -3
@@ -6,9 +6,6 @@ config SYS_BOARD config SYS_VENDOR default "tbs" -config SYS_SOC - default "mx6" - config SYS_CONFIG_NAME default "tbs2910"
Signature · 1 line
1.9.1