imx: vf610 add get_cpu_rev
Subsystems (2)
PATCH v2 1/1 imx: vf610 add get_cpu_rev
Since we need to support runtime check for different drivers, we need to add get_cpu_rev for vf610, otherwise there will be build errors.
This patch introduces a dummy CPU id which is not read from chip silicon. Later when we can get the real id from chip, can fix the value of MXC_CPU_VF610 then.
---
Changes v2:
Take suggestion from Stefano, get_cpu_rev for vf610 should return an ID saying dummy ID, but not 0.
arch/arm/cpu/armv7/vf610/generic.c | 6 ++++++ arch/arm/include/asm/arch-imx/cpu.h | 1 + 2 files changed, 7 insertions(+)
arch/arm/cpu/armv7/vf610/generic.c +6 -0
@@ -9,6 +9,7 @@#include <asm/arch/imx-regs.h> #include <asm/arch/clock.h> #include <asm/arch/crm_regs.h> +#include <asm/imx-common/sys_proto.h> #include <netdev.h> #ifdef CONFIG_FSL_ESDHC #include <fsl_esdhc.h>
@@ -266,6 +267,11 @@ void imx_get_mac_from_fuse(int dev_id, unsigned char *mac) }#endif +u32 get_cpu_rev (void ) +{ +return MXC_CPU_VF610 <<12 ; +} +#if defined(CONFIG_DISPLAY_CPUINFO )static char *get_reset_cause (void ) {
arch/arm/include/asm/arch-imx/cpu.h +1 -0
@@ -21,6 +21,7 @@#define MXC_CPU_MX6D 0x67#define MXC_CPU_MX6DP 0x68#define MXC_CPU_MX6QP 0x69 +#define MXC_CPU_VF610 0xF6/* dummy ID */ #define CS0_128 0#define CS0_64M_CS1_64M 1
Signature · 1 line
1.8.4
PATCH v2 1/1 imx: vf610 add get_cpu_rev
Hi Peng,
Quoted 50 lines · Peng Fan
Since we need to support runtime check for different drivers, we need to add
get_cpu_revfor vf610, otherwise there will be build errors.This patch introduces a dummy CPU id which is not read from chip silicon. Later when we can get the real id from chip, can fix the value of
MXC_CPU_VF610then.Signed-off-by Peng Fan <[email protected]>Suggested-by Stefano Babic <[email protected]>Cc Stefano Babic <[email protected]>---
Changes v2:
Take suggestion from Stefano,get_cpu_revfor vf610 should return an ID saying dummy ID, but not 0.arch/arm/cpu/armv7/vf610/generic.c | 6 ++++++ arch/arm/include/asm/arch-imx/cpu.h | 1 + 2 files changed, 7 insertions(+)arch/arm/cpu/armv7/vf610/generic.c +6
-0@@ -9,6 +9,7 @@#include <asm/arch/imx-regs.h> #include <asm/arch/clock.h> #include <asm/arch/crm_regs.h> +#include <asm/imx-common/sys_proto.h> #include <netdev.h> #ifdef CONFIG_FSL_ESDHC #include <fsl_esdhc.h> @@ -266,6 +267,11 @@ void imx_get_mac_from_fuse(int dev_id, unsigned char *mac) }#endif +u32 get_cpu_rev (void ) +{ +return MXC_CPU_VF610 <<12 ; +} +#if defined(CONFIG_DISPLAY_CPUINFO )static char *get_reset_cause (void ) {arch/arm/include/asm/arch-imx/cpu.h +0
-0
arch/arm/include/asm/arch-imx/cpu.h line 27
Quoted 7 lines
arch/arm/include/asm/arch-imx/cpu.h +1
-0@@ -21,6 +21,7 @@#define MXC_CPU_MX6D 0x67#define MXC_CPU_MX6DP 0x68#define MXC_CPU_MX6QP 0x69 +#define MXC_CPU_VF610 0xF6/* dummy ID */ #define CS0_128 0#define CS0_64M_CS1_64M 1
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================