rtc:ds3232/ds3231: Add support to generate 32KHz output
PATCH 1/2 rtc:ds3232/ds3231: Add support to generate 32KHz output
RTC devices can generate 32KHz output if for -DS3232 device, EN32KHz bit and BB32KHz bit are set -DS3231 device, EN32KHz bit is set, BB32KHz bit is don't care
Patch adds rtc_enable_32khz_output() which when called will enable 32KHz output on 32KHz pin
Signed-off-by Priyanka Jain <[email protected]>
---
Based on git://git.denx.de/u-boot-fsl-qoriq
drivers/rtc/ds3231.c | 10 ++++++++++ include/rtc.h | 1 + 2 files changed, 11 insertions(+), 0 deletions(-)
drivers/rtc/ds3231.c +10 -0
@@ -49,6 +49,8 @@#define RTC_STAT_BIT_A1F 0x1/* Alarm 1 flag */ #define RTC_STAT_BIT_A2F 0x2/* Alarm 2 flag */ #define RTC_STAT_BIT_OSF 0x80/* Oscillator stop flag */ +#define RTC_STAT_BIT_BB32KHZ 0x40/* Battery backed 32KHz Output */ +#define RTC_STAT_BIT_EN32KHZ 0x8/* Enable 32KHz Output */ static uchar rtc_read (uchar reg);
@@ -141,6 +143,14 @@ void rtc_reset (void)rtc_write (RTC_CTL_REG_ADDR ,RTC_CTL_BIT_RS1 |RTC_CTL_BIT_RS2 ); } +/* +* Enable 32KHz output +*/ +void rtc_enable_32khz_output (void ) +{ +rtc_write (RTC_STAT_REG_ADDR , +RTC_STAT_BIT_BB32KHZ |RTC_STAT_BIT_EN32KHZ ); +}/* * Helper functions
include/rtc.h +1 -0
@@ -151,6 +151,7 @@ int rtc_write32(struct udevice *dev, unsigned int reg, u32 value);int rtc_get (struct rtc_time *);int rtc_set (struct rtc_time *);void rtc_reset (void ); +void rtc_enable_32khz_output (void );/** * rtc_read8() - Read an 8-bit register
Signature · 1 line
1.7.4.1
York Sun
AppliedPATCH 1/2 rtc:ds3232/ds3231: Add support to generate 32KHz output
Quoted 8 lines · Priyanka Jain
RTC devices can generate 32KHz output if for
(quoted diff) +0
-2-DS3232 device, EN32KHz bit and BB32KHz bit are set -DS3231 device, EN32KHz bit is set, BB32KHz bit is don't carePatch adds
rtc_enable_32khz_output()which when called will enable 32KHz output on 32KHz pinSigned-off-by Priyanka Jain <[email protected]>
Applied to fsl-qoriq master branch. Awaiting upstream.
York