armv8: ls2085a: Update bootargs as per default target console
PATCH 1/1 armv8: ls2085a: Update bootargs as per default target console
LS2085 targets supports following UART console
LS2085AQDS UART0
LS2085ARDB UART1
LS2085ASim UART0
LS2085AEmu UART0
So update the bootargs as per the default console present at the target
Signed-off-by Prabhakar Kushwaha <[email protected]>
--- include/configs/ls2085a_common.h | 4 ++-- include/configs/ls2085ardb.h | 6 ++++++ 2 files changed, 8 insertions(+), 2 deletions(-)
include/configs/ls2085a_common.h +2 -2
@@ -262,8 +262,8 @@ unsigned long long get_qixis_addr(void);"kernel_size=0x2800000\0" \ "console=ttyAMA0,38400n8\0" -#define CONFIG_BOOTARGS "console=ttyS1,115200 root=/dev/ram0 " \ - "earlycon=uart8250,mmio,0x21c0600,115200 " \ +#define CONFIG_BOOTARGS "console=ttyS0,115200 root=/dev/ram0 " \ + "earlycon=uart8250,mmio,0x21c0500,115200 " \ "ramdisk_size=0x2000000 default_hugepagesz=2m" \ " hugepagesz=2m hugepages=16"#define CONFIG_BOOTCOMMAND "cp.b $kernel_start $kernel_load " \
include/configs/ls2085ardb.h +6 -0
@@ -326,6 +326,12 @@ unsigned long get_board_sys_clk(void);"kernel_load=0xa0000000\0" \ "kernel_size=0x2800000\0" +#undef CONFIG_BOOTARGS +#define CONFIG_BOOTARGS "console=ttyS1,115200 root=/dev/ram0 " \ + "earlycon=uart8250,mmio,0x21c0600,115200 " \ + "ramdisk_size=0x2000000 default_hugepagesz=2m" \ + " hugepagesz=2m hugepages=16" +/* MAC/PHY configuration */ #ifdef CONFIG_FSL_MC_ENET #define CONFIG_PHYLIB_10G
Signature · 1 line
1.9.1
York Sun
AppliedPATCH 1/1 armv8: ls2085a: Update bootargs as per default target console
Quoted 10 lines · Prabhakar Kushwaha
LS2085 targets supports following UART console
LS2085AQDS UART0
LS2085ARDB UART1
LS2085ASim UART0
LS2085AEmu UART0So update the bootargs as per the default console present at the target
Signed-off-by Prabhakar Kushwaha <[email protected]>---
Applied to fsl-qoriq master branch. Awaiting upstream.
York