Skip to contentSkip to conversation

alx: Add the Device ID for the Killer E2400 03:00.0 Ethernet controller: Qualcomm Atheros Device e0a1 (rev 10) Subsystem: Micro-Star International Co., Ltd. [MSI] Device 7977 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 325 Region 0: Memory at dfc00000 (64-bit, non-prefetchable) [size=256K] Region 2: I/O ports at d000 [size=128] Capabilities: [40] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 4096 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited ExtTag- AttnBtn+

PATCH In review Ben Pope 2 participants 3 messages Sep 8, 2015 – Sep 10, 2015

Subsystems (3)
lore
Share & tools
lore

Ben Pope

author
#0 lore raw

PATCH 1/1 alx: Add the Device ID for the Killer E2400 03:00.0 Ethernet controller: Qualcomm Atheros Device e0a1 (rev 10) Subsystem: Micro-Star International Co., Ltd. [MSI] Device 7977 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 325 Region 0: Memory at dfc00000 (64-bit, non-prefetchable) [size=256K] Region 2: I/O ports at d000 [size=128] Capabilities: [40] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 4096 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited ExtTag- AttnBtn+

From: BenPope <[email protected]>

---
 drivers/net/ethernet/atheros/alx/main.c | 2 ++
 drivers/net/ethernet/atheros/alx/reg.h  | 1 +
 2 files changed, 3 insertions(+)
drivers/net/ethernet/atheros/alx/main.c +2 -0
index c8af3ce..bd377a6 100644
@@ -1534,6 +1534,8 @@ static const struct pci_device_id alx_pci_tbl[] = {
 	  .driver_data = ALX_DEV_QUIRK_MSI_INTX_DISABLE_BUG },
 	{ PCI_VDEVICE(ATTANSIC, ALX_DEV_ID_E2200),
 	  .driver_data = ALX_DEV_QUIRK_MSI_INTX_DISABLE_BUG },
+	{ PCI_VDEVICE(ATTANSIC, ALX_DEV_ID_E2400),
+	  .driver_data = ALX_DEV_QUIRK_MSI_INTX_DISABLE_BUG },
 	{ PCI_VDEVICE(ATTANSIC, ALX_DEV_ID_AR8162),
 	  .driver_data = ALX_DEV_QUIRK_MSI_INTX_DISABLE_BUG },
 	{ PCI_VDEVICE(ATTANSIC, ALX_DEV_ID_AR8171) },
drivers/net/ethernet/atheros/alx/reg.h +1 -0
index af006b4..0959e68 100644
@@ -37,6 +37,7 @@
 
 #define ALX_DEV_ID_AR8161				0x1091
 #define ALX_DEV_ID_E2200				0xe091
+#define ALX_DEV_ID_E2400				0xe0a1
 #define ALX_DEV_ID_AR8162				0x1090
 #define ALX_DEV_ID_AR8171				0x10A1
 #define ALX_DEV_ID_AR8172				0x10A0
Signature · 1 line
2.1.4
maintainer
#1 lore raw

Re: [PATCH] alx: Add the Device ID for the Killer E2400 03:00.0 Ethernet controller: Qualcomm Atheros Device e0a1 (rev 10) Subsystem: Micro-Star International Co., Ltd. [MSI] Device 7977 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 325 Region 0: Memory at dfc00000 (64-bit, non-prefetchable) [size=256K] Region 2: I/O ports at d000 [size=128] Capabilities: [40] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 4096 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited ExtTag- AttnBtn+ AttnInd+ Pwr

That's a rather rediculous Subject line, you'll need to fix that before anyone will consider your submission seriously.

author
#2 lore raw

Re: [PATCH] alx: Add the Device ID for the Killer E2400

Quoted 2 lines · David Miller

That's a rather rediculous Subject line, you'll need to fix that before anyone will consider your submission seriously.

My apologies, first time user of git-send-email, I should have just sent it to myself as a test.

The body was supposed to include the following lspci -vv output in case it was useful:

03:00.0 Ethernet controller: Qualcomm Atheros Device e0a1 (rev 10)
Subsystem: Micro-Star International Co., Ltd. [MSI] Device 7977
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 325
Region 0: Memory at dfc00000 (64-bit, non-prefetchable) [size=256K] Region 2: I/O ports at d000 [size=128]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 4096 bytes, PhantFunc 0, Latency L0s
unlimited, L1 unlimited
ExtTag- AttnBtn+ AttnInd+ PwrInd+ RBE+ FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+
Unsupported+
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 256 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+
TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit
Latency L0s unlimited, L1 unlimited
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-

    Capabilities: [c0] MSI: Enable+ Count=1/16 Maskable+ 64bit+
        Address: 00000000fee0200c  Data: 4192
        Masking: 0000fffe  Pending: 00000000
    Capabilities: [d8] MSI-X: Enable- Count=16 Masked-
        Vector table: BAR=0 offset=00002000
        PBA: BAR=0 offset=00003000
    Capabilities: [100 v1] Advanced Error Reporting
        UESta:    DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 

RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP- SDES+ TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
Kernel driver in use: alx

Ben