Testing CAN on Allwinner A20 / Banana Pi
Hi,
I'm new to socketcan and like to test the recent driver for the Allwinner A20 on a BPi.
I've got a BPi running CAN4Linux and like to setup a second BPi running socketcan.
I have some basic questions prior to get started with the project:
1.
Which kernel version is necessary for the current socketcan? I use the standard linux-sunxi kernel from the repos as this worked well with CAN4Linux.
https://github.com/linux-sunxi/linux-sunxi.git
2.
I haven't been able to locate the recent driver on the repos.
https://git.kernel.org/cgit/linux/kernel/git/mkl/linux-can-next.git/
https://git.kernel.org/cgit/linux/kernel/git/mkl/linux-can.git/
Did I miss something, because none of the related commits I see in the mailing list are present in the repo?
Thanks and Best Regards,
Patrick Menschel
Marc Kleine-Budde
maintainerQuoted 5 lines · Patrick Menschel
I'm new to socketcan and like to test the recent driver for the Allwinner A20 on a BPi.
I've got a BPi running CAN4Linux and like to setup a second BPi running socketcan.
Is your CAN4Linux setup working? It's good to have a working CAN station to talk to.
Quoted 7 lines
I have some basic questions prior to get started with the project:
1.
Which kernel version is necessary for the current socketcan? I use the standard linux-sunxi kernel from the repos as this worked well with CAN4Linux.
https://github.com/linux-sunxi/linux-sunxi.git
I'm using mainline linux on my Bpi. Works quite well. I don't use the graphics, though.
Quoted 7 lines
2.
I haven't been able to locate the recent driver on the repos.
https://git.kernel.org/cgit/linux/kernel/git/mkl/linux-can-next.git/
https://git.kernel.org/cgit/linux/kernel/git/mkl/linux-can.git/Did I miss something, because none of the related commits I see in the mailing list are present in the repo?
The driver by Gerhard Bertelsmann is still under review, you have to apply the patches:
http://article.gmane.org/gmane.linux.can/8511/raw
http://article.gmane.org/gmane.linux.can/8512/raw
to your kernel manually. You have to switch on the CAN driver in you dts as documented in patch 8511. Note: When using the patch from the gmane archive you have to replace the " <at> " by a "@" sign.
Marc
Signature · 4 lines
Pengutronix e.K. | Marc Kleine-Budde | Industrial Linux Solutions | Phone: +49-231-2826-924 | Vertretung West/Dortmund | Fax: +49-5121-206917-5555 | Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
Hi,
the CAN4Linux Setup was made according to this walkthrough:
http://www.lemaker.org/thread-209-2-1-2.html
http://can-bus.996267.n3.nabble.com/can4linux-for-the-BananaPi-td4110.html
Transceiver is a Texas Instruments SN65HVD230DR 3,3V.
I have no application running with the CAN4Linux but I ran a few test programs, such as a CAN dump.
I have an EDC17 that's flooding the CAN Bus with 11bit messages <1ms. The BPi is capable to keep up with it.
An RPi with MCP2515 and socketcan instantly gives up.
I haven't tried it on the new RPi2 though.
Regards,
Patrick
Am 12.09.2015 um 11:13 schrieb Marc Kleine-Budde:
Quoted 43 lines · Patrick Menschel
Quoted 6 lines
I'm new to socketcan and like to test the recent driver for the Allwinner A20 on a BPi.
I've got a BPi running CAN4Linux and like to setup a second BPi running socketcan.
Is your CAN4Linux setup working? It's good to have a working CAN station to talk to.
Quoted 7 lines
I have some basic questions prior to get started with the project:
1.
Which kernel version is necessary for the current socketcan? I use the standard linux-sunxi kernel from the repos as this worked well with CAN4Linux.
https://github.com/linux-sunxi/linux-sunxi.gitI'm using mainline linux on my Bpi. Works quite well. I don't use the graphics, though.
Quoted 7 lines
2.
I haven't been able to locate the recent driver on the repos.
https://git.kernel.org/cgit/linux/kernel/git/mkl/linux-can-next.git/
https://git.kernel.org/cgit/linux/kernel/git/mkl/linux-can.git/Did I miss something, because none of the related commits I see in the mailing list are present in the repo?
The driver by Gerhard Bertelsmann is still under review, you have to apply the patches:
http://article.gmane.org/gmane.linux.can/8511/raw
http://article.gmane.org/gmane.linux.can/8512/rawto your kernel manually. You have to switch on the CAN driver in you dts as documented in patch 8511. Note: When using the patch from the gmane archive you have to replace the " <at> " by a "@" sign.
Marc
Hello Marc,
you mentioned that you have a running Bpi with mainline kernel.
My question would be if you're also running mainline u-boot with device tree bindings.
I'm now running mainline kernel from stable branch
compiled with sunxi_defconfig thus CAN driver is built-in and mainline u-boot according to
http://linux-sunxi.org/Mainline_Kernel_Howto
http://linux-sunxi.org/Mainline_U-boot
.
I've added can0 entries manually to
arch/arm/boot/dts/sun7i-a20.dtsiarch/arm/boot/dts/sun7i-a20-bananapi.dts
since they are missing in the stable branch.
Compiling to dtb and back to dts now resolves to
can@01c2bc00 {
compatible = "allwinner,sun4i-a10-can";
reg = <0x1c2bc00 0x400>;
interrupts = <0x0 0x1a 0x4>;
clocks = <0x31 0x4>;
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <0x32>;
};That does look plausible from my perspective.
Unfortunately I'm still missing /dev/can0 and have no clue why.
If your Bpi works with legacy u-boot, I would try that next.
Thanks and Best Regards,
Patrick
Am 12.09.2015 um 11:13 schrieb Marc Kleine-Budde:
Quoted 42 lines · Patrick Menschel
Quoted 6 lines
I'm new to socketcan and like to test the recent driver for the Allwinner A20 on a BPi.
I've got a BPi running CAN4Linux and like to setup a second BPi running socketcan.
Is your CAN4Linux setup working? It's good to have a working CAN station to talk to.
Quoted 7 lines
I have some basic questions prior to get started with the project:
1.
Which kernel version is necessary for the current socketcan? I use the standard linux-sunxi kernel from the repos as this worked well with CAN4Linux.
https://github.com/linux-sunxi/linux-sunxi.gitI'm using mainline linux on my Bpi. Works quite well. I don't use the graphics, though.
Quoted 7 lines
2.
I haven't been able to locate the recent driver on the repos.
https://git.kernel.org/cgit/linux/kernel/git/mkl/linux-can-next.git/
https://git.kernel.org/cgit/linux/kernel/git/mkl/linux-can.git/Did I miss something, because none of the related commits I see in the mailing list are present in the repo?
The driver by Gerhard Bertelsmann is still under review, you have to apply the patches:
http://article.gmane.org/gmane.linux.can/8511/raw
http://article.gmane.org/gmane.linux.can/8512/rawto your kernel manually. You have to switch on the CAN driver in you dts as documented in patch 8511. Note: When using the patch from the gmane archive you have to replace the " <at> " by a "@" sign.
Marc
Marc Kleine-Budde
maintainerQuoted 4 lines · Patrick Menschel
you mentioned that you have a running Bpi with mainline kernel.
My question would be if you're also running mainline u-boot with device tree bindings.
I'm running a u-boot, not sure which version.
Quoted 27 lines
I'm now running mainline kernel from stable branch
compiled withsunxi_defconfigthus CAN driver is built-in and mainline u-boot according tohttp://linux-sunxi.org/Mainline_Kernel_Howto
http://linux-sunxi.org/Mainline_U-boot
.I've added can0 entries manually to
arch/arm/boot/dts/sun7i-a20.dtsiarch/arm/boot/dts/sun7i-a20-bananapi.dtssince they are missing in the stable branch.
Compiling to dtb and back to dts now resolves to
can@01c2bc00 { compatible = "allwinner,sun4i-a10-can"; reg = <0x1c2bc00 0x400>; interrupts = <0x0 0x1a 0x4>; clocks = <0x31 0x4>; status = "okay"; pinctrl-names = "default"; pinctrl-0 = <0x32>; };
Quoted 3 lines
That does look plausible from my perspective.
Unfortunately I'm still missing
/dev/can0and have no clue why.
CAN devices are network devices and will not show up in "/dev". Have a look at:
ifconfig -a
Quoted 1 line
If your Bpi works with legacy u-boot, I would try that next.
Marc
Signature · 4 lines
Pengutronix e.K. | Marc Kleine-Budde | Industrial Linux Solutions | Phone: +49-231-2826-924 | Vertretung West/Dortmund | Fax: +49-5121-206917-5555 | Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
Thanks Marc,
that works apparently.
ifconfig -a
can0 Link encap:UNSPEC Hardware Adresse
00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
NOARP MTU:16 Metrik:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 Kollisionen:0 Sendewarteschlangenlänge:10 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:35
Regards,
Patrick
Am 19.03.2016 um 13:33 schrieb Marc Kleine-Budde:
Quoted 48 lines · Patrick Menschel
Quoted 4 lines
you mentioned that you have a running Bpi with mainline kernel.
My question would be if you're also running mainline u-boot with device tree bindings.
I'm running a u-boot, not sure which version.
Quoted 27 lines
I'm now running mainline kernel from stable branch
compiled withsunxi_defconfigthus CAN driver is built-in and mainline u-boot according tohttp://linux-sunxi.org/Mainline_Kernel_Howto
http://linux-sunxi.org/Mainline_U-boot
.I've added can0 entries manually to
arch/arm/boot/dts/sun7i-a20.dtsiarch/arm/boot/dts/sun7i-a20-bananapi.dtssince they are missing in the stable branch.
Compiling to dtb and back to dts now resolves to
can@01c2bc00 { compatible = "allwinner,sun4i-a10-can"; reg = <0x1c2bc00 0x400>; interrupts = <0x0 0x1a 0x4>; clocks = <0x31 0x4>; status = "okay"; pinctrl-names = "default"; pinctrl-0 = <0x32>; };Quoted 3 lines
That does look plausible from my perspective.
Unfortunately I'm still missing
/dev/can0and have no clue why.CAN devices are network devices and will not show up in "/dev". Have a look at:
ifconfig -a
Quoted 1 line
If your Bpi works with legacy u-boot, I would try that next.
Marc
Marc Kleine-Budde
maintainerQuoted 3 lines · Patrick Menschel
Thanks Marc,
that works apparently.
\o/
Signature · 4 lines
Pengutronix e.K. | Marc Kleine-Budde | Industrial Linux Solutions | Phone: +49-231-2826-924 | Vertretung West/Dortmund | Fax: +49-5121-206917-5555 | Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
Quoted 13 lines · Marc Kleine-Budde
Quoted 13 lines
Compiling to dtb and back to dts now resolves to
can@01c2bc00 { compatible = "allwinner,sun4i-a10-can"; reg = <0x1c2bc00 0x400>; interrupts = <0x0 0x1a 0x4>; clocks = <0x31 0x4>; status = "okay"; pinctrl-names = "default"; pinctrl-0 = <0x32>; };
Quoted 10 lines
Quoted 3 lines
That does look plausible from my perspective.
Unfortunately I'm still missing
/dev/can0and have no clue why.CAN devices are network devices and will not show up in "/dev". Have a look at:
ifconfig -a
Quoted 1 line
If your Bpi works with legacy u-boot, I would try that next.
It is not enough having the can-core controller in dtsi only. The kernel has to be compiled with a network/can/socketcan enabled and the specific SoC can controller enabled in the same subarch structure. i.e.: you will need to have:
in sunxi_defconfig:
CONFIG_CAN=yCONFIG_CAN_SUN4I=y
Just my $0.2...
Hope this helps!
Signature · 4 lines
Eurek s.r.l. | Electronic Engineering | http://www.eurek.it via Celletta 8/B, 40026 Imola, Italy | Phone: +39-(0)542-609120 p.iva 00690621206 - c.f. 04020030377 | Fax: +39-(0)542-609212
Thanks for the advice,
in my case the sunxi_defconfig already had the driver selected, so no change necessary.
Apparently only the device tree information is missing in the mainline kernel. If that were to change, it would work out of the box if a transceiver is added.
At the moment I can send and recv from both C and Python3.
Regards,
Patrick
Am 21.03.2016 um 10:27 schrieb gianluca:
Quoted 38 lines · Marc Kleine-Budde
Quoted 13 lines
Quoted 13 lines
Compiling to dtb and back to dts now resolves to
can@01c2bc00 { compatible = "allwinner,sun4i-a10-can"; reg = <0x1c2bc00 0x400>; interrupts = <0x0 0x1a 0x4>; clocks = <0x31 0x4>; status = "okay"; pinctrl-names = "default"; pinctrl-0 = <0x32>; };Quoted 10 lines
Quoted 3 lines
That does look plausible from my perspective.
Unfortunately I'm still missing
/dev/can0and have no clue why.CAN devices are network devices and will not show up in "/dev". Have a look at:
ifconfig -a
Quoted 1 line
If your Bpi works with legacy u-boot, I would try that next.
It is not enough having the can-core controller in dtsi only. The kernel has to be compiled with a network/can/socketcan enabled and the specific SoC can controller enabled in the same subarch structure. i.e.: you will need to have:
in
sunxi_defconfig:
CONFIG_CAN=yCONFIG_CAN_SUN4I=yJust my $0.2...
Hope this helps!
Marc Kleine-Budde
maintainerQuoted 7 lines · Patrick Menschel
Thanks for the advice,
in my case the
sunxi_defconfigalready had the driver selected, so no change necessary.
Apparently only the device tree information is missing in the mainline kernel. If that were to change, it would work out of the box if a transceiver is added.
The CAN node should be added with no status attribute to the SoC dtsi, so it's disabled. In the board dts you set status = "okay". The pinctrl goes into the dtsi if there's only one possibility, otherwise into the board dts.
Marc
Signature · 4 lines
Pengutronix e.K. | Marc Kleine-Budde | Industrial Linux Solutions | Phone: +49-231-2826-924 | Vertretung West/Dortmund | Fax: +49-5121-206917-5555 | Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
Hello Marc,
I was working with this git repo
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
to compile the kernel. In
arch/arm/boot/dts/sun7i-a20.dtsiarch/arm/boot/dts/sun7i-a20-bananapi.dts
the can core is missing. I already tested with the original files and did not get can0 interface on ifconfig -a
Same with this git repogit://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next.git
but maybe I'm just using the wrong repo.
Either way I ended up patching the files manually based on the example in the documentation.
Documentation/devicetree/bindings/net/can/sun4i_can.txt
Please find both files attached.
Regards,
Patrick
Am 21.03.2016 um 17:14 schrieb Marc Kleine-Budde:
Quoted 9 lines · Patrick Menschel
Quoted 7 lines
Thanks for the advice,
in my case the
sunxi_defconfigalready had the driver selected, so no change necessary.
Apparently only the device tree information is missing in the mainline kernel. If that were to change, it would work out of the box if a transceiver is added.
Quoted 7 lines
The CAN node should be added with no status attribute to the SoC dtsi, so it's disabled. In the board dts you set status = "okay". The pinctrl goes into the dtsi if there's only one possibility, otherwise into the board dts.
Marc
/*
* Copyright 2013 Maxime Ripard
*
* Maxime Ripard <[email protected]>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following * conditions: * * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE.
*/
#include "skeleton.dtsi"
#include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/thermal/thermal.h>
#include <dt-bindings/clock/sun4i-a10-pll2.h>
#include <dt-bindings/dma/sun4i-a10.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
interrupt-parent = <&gic>;
aliases {
ethernet0 = &gmac;
};
chosen {
#address-cells = <1>;
#size-cells = <1>;
ranges;
framebuffer@0 {
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0-hdmi";
clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
<&ahb_gates 44>, <&dram_gates 26>;
status = "disabled";
};
framebuffer@1 {
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0";
clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>,
<&dram_gates 26>;
status = "disabled";
};
framebuffer@2 {
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0-tve0";
clocks = <&pll5 1>, <&ahb_gates 34>, <&ahb_gates 36>,
<&ahb_gates 44>, <&dram_gates 26>;
status = "disabled";
};
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu0: cpu@0 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <0>;
clocks = <&cpu>;
clock-latency = <244144>; /* 8 32k periods */
operating-points = <
/* kHz uV */
960000 1400000
912000 1400000
864000 1300000
720000 1200000
528000 1100000
312000 1000000
144000 1000000
>;
#cooling-cells = <2>;
cooling-min-level = <0>;
cooling-max-level = <6>;
};
cpu@1 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <1>;
};
};
thermal-zones {
cpu_thermal {
/* milliseconds */
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&rtp>;
cooling-maps {
map0 {
trip = <&cpu_alert0>;
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
trips {
cpu_alert0: cpu_alert0 {
/* milliCelsius */
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
cpu_crit: cpu_crit {
/* milliCelsius */
temperature = <100000>;
hysteresis = <2000>;
type = "critical";
};
};
};
};
memory {
reg = <0x40000000 0x80000000>;
};
timer {
compatible = "arm,armv7-timer";
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
};
pmu {
compatible = "arm,cortex-a7-pmu", "arm,cortex-a15-pmu";
interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
};
clocks {
#address-cells = <1>;
#size-cells = <1>;
ranges;
osc24M: clk@01c20050 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-osc-clk";
reg = <0x01c20050 0x4>;
clock-frequency = <24000000>;
clock-output-names = "osc24M";
};
osc32k: clk@0 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
clock-output-names = "osc32k";
};
pll1: clk@01c20000 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-pll1-clk";
reg = <0x01c20000 0x4>;
clocks = <&osc24M>;
clock-output-names = "pll1";
};
pll2: clk@01c20008 {
#clock-cells = <1>;
compatible = "allwinner,sun4i-a10-pll2-clk";
reg = <0x01c20008 0x8>;
clocks = <&osc24M>;
clock-output-names = "pll2-1x", "pll2-2x",
"pll2-4x", "pll2-8x";
};
pll4: clk@01c20018 {
#clock-cells = <0>;
compatible = "allwinner,sun7i-a20-pll4-clk";
reg = <0x01c20018 0x4>;
clocks = <&osc24M>;
clock-output-names = "pll4";
};
pll5: clk@01c20020 {
#clock-cells = <1>;
compatible = "allwinner,sun4i-a10-pll5-clk";
reg = <0x01c20020 0x4>;
clocks = <&osc24M>;
clock-output-names = "pll5_ddr", "pll5_other";
};
pll6: clk@01c20028 {
#clock-cells = <1>;
compatible = "allwinner,sun4i-a10-pll6-clk";
reg = <0x01c20028 0x4>;
clocks = <&osc24M>;
clock-output-names = "pll6_sata", "pll6_other", "pll6",
"pll6_div_4";
};
pll8: clk@01c20040 {
#clock-cells = <0>;
compatible = "allwinner,sun7i-a20-pll4-clk";
reg = <0x01c20040 0x4>;
clocks = <&osc24M>;
clock-output-names = "pll8";
};
cpu: cpu@01c20054 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-cpu-clk";
reg = <0x01c20054 0x4>;
clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll6 1>;
clock-output-names = "cpu";
};
axi: axi@01c20054 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-axi-clk";
reg = <0x01c20054 0x4>;
clocks = <&cpu>;
clock-output-names = "axi";
};
ahb: ahb@01c20054 {
#clock-cells = <0>;
compatible = "allwinner,sun5i-a13-ahb-clk";
reg = <0x01c20054 0x4>;
clocks = <&axi>, <&pll6 3>, <&pll6 1>;
clock-output-names = "ahb";
/*
* Use PLL6 as parent, instead of CPU/AXI
* which has rate changes due to cpufreq
*/
assigned-clocks = <&ahb>;
assigned-clock-parents = <&pll6 3>;
};
ahb_gates: clk@01c20060 {
#clock-cells = <1>;
compatible = "allwinner,sun7i-a20-ahb-gates-clk";
reg = <0x01c20060 0x8>;
clocks = <&ahb>;
clock-indices = <0>, <1>,
<2>, <3>, <4>,
<5>, <6>, <7>, <8>,
<9>, <10>, <11>, <12>,
<13>, <14>, <16>,
<17>, <18>, <20>, <21>,
<22>, <23>, <25>,
<28>, <32>, <33>, <34>,
<35>, <36>, <37>, <40>,
<41>, <42>, <43>,
<44>, <45>, <46>,
<47>, <49>, <50>,
<52>;
clock-output-names = "ahb_usb0", "ahb_ehci0",
"ahb_ohci0", "ahb_ehci1", "ahb_ohci1",
"ahb_ss", "ahb_dma", "ahb_bist", "ahb_mmc0",
"ahb_mmc1", "ahb_mmc2", "ahb_mmc3", "ahb_ms",
"ahb_nand", "ahb_sdram", "ahb_ace",
"ahb_emac", "ahb_ts", "ahb_spi0", "ahb_spi1",
"ahb_spi2", "ahb_spi3", "ahb_sata",
"ahb_hstimer", "ahb_ve", "ahb_tvd", "ahb_tve0",
"ahb_tve1", "ahb_lcd0", "ahb_lcd1", "ahb_csi0",
"ahb_csi1", "ahb_hdmi1", "ahb_hdmi0",
"ahb_de_be0", "ahb_de_be1", "ahb_de_fe0",
"ahb_de_fe1", "ahb_gmac", "ahb_mp",
"ahb_mali";
};
apb0: apb0@01c20054 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-apb0-clk";
reg = <0x01c20054 0x4>;
clocks = <&ahb>;
clock-output-names = "apb0";
};
apb0_gates: clk@01c20068 {
#clock-cells = <1>;
compatible = "allwinner,sun7i-a20-apb0-gates-clk";
reg = <0x01c20068 0x4>;
clocks = <&apb0>;
clock-indices = <0>, <1>,
<2>, <3>, <4>,
<5>, <6>, <7>,
<8>, <10>;
clock-output-names = "apb0_codec", "apb0_spdif",
"apb0_ac97", "apb0_iis0", "apb0_iis1",
"apb0_pio", "apb0_ir0", "apb0_ir1",
"apb0_iis2", "apb0_keypad";
};
apb1: clk@01c20058 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-apb1-clk";
reg = <0x01c20058 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
clock-output-names = "apb1";
};
apb1_gates: clk@01c2006c {
#clock-cells = <1>;
compatible = "allwinner,sun7i-a20-apb1-gates-clk";
reg = <0x01c2006c 0x4>;
clocks = <&apb1>;
clock-indices = <0>, <1>,
<2>, <3>, <4>,
<5>, <6>, <7>,
<15>, <16>, <17>,
<18>, <19>, <20>,
<21>, <22>, <23>;
clock-output-names = "apb1_i2c0", "apb1_i2c1",
"apb1_i2c2", "apb1_i2c3", "apb1_can",
"apb1_scr", "apb1_ps20", "apb1_ps21",
"apb1_i2c4", "apb1_uart0", "apb1_uart1",
"apb1_uart2", "apb1_uart3", "apb1_uart4",
"apb1_uart5", "apb1_uart6", "apb1_uart7";
};
nand_clk: clk@01c20080 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c20080 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "nand";
};
ms_clk: clk@01c20084 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c20084 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "ms";
};
mmc0_clk: clk@01c20088 {
#clock-cells = <1>;
compatible = "allwinner,sun4i-a10-mmc-clk";
reg = <0x01c20088 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "mmc0",
"mmc0_output",
"mmc0_sample";
};
mmc1_clk: clk@01c2008c {
#clock-cells = <1>;
compatible = "allwinner,sun4i-a10-mmc-clk";
reg = <0x01c2008c 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "mmc1",
"mmc1_output",
"mmc1_sample";
};
mmc2_clk: clk@01c20090 {
#clock-cells = <1>;
compatible = "allwinner,sun4i-a10-mmc-clk";
reg = <0x01c20090 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "mmc2",
"mmc2_output",
"mmc2_sample";
};
mmc3_clk: clk@01c20094 {
#clock-cells = <1>;
compatible = "allwinner,sun4i-a10-mmc-clk";
reg = <0x01c20094 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "mmc3",
"mmc3_output",
"mmc3_sample";
};
ts_clk: clk@01c20098 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c20098 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "ts";
};
ss_clk: clk@01c2009c {
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c2009c 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "ss";
};
spi0_clk: clk@01c200a0 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c200a0 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "spi0";
};
spi1_clk: clk@01c200a4 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c200a4 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "spi1";
};
spi2_clk: clk@01c200a8 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c200a8 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "spi2";
};
pata_clk: clk@01c200ac {
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c200ac 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "pata";
};
ir0_clk: clk@01c200b0 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c200b0 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "ir0";
};
ir1_clk: clk@01c200b4 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c200b4 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "ir1";
};
keypad_clk: clk@01c200c4 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c200c4 0x4>;
clocks = <&osc24M>;
clock-output-names = "keypad";
};
usb_clk: clk@01c200cc {
#clock-cells = <1>;
#reset-cells = <1>;
compatible = "allwinner,sun4i-a10-usb-clk";
reg = <0x01c200cc 0x4>;
clocks = <&pll6 1>;
clock-output-names = "usb_ohci0", "usb_ohci1",
"usb_phy";
};
spi3_clk: clk@01c200d4 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c200d4 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "spi3";
};
dram_gates: clk@01c20100 {
#clock-cells = <1>;
compatible = "allwinner,sun4i-a10-dram-gates-clk";
reg = <0x01c20100 0x4>;
clocks = <&pll5 0>;
clock-indices = <0>,
<1>, <2>,
<3>,
<4>,
<5>, <6>,
<15>,
<24>, <25>,
<26>, <27>,
<28>, <29>;
clock-output-names = "dram_ve",
"dram_csi0", "dram_csi1",
"dram_ts",
"dram_tvd",
"dram_tve0", "dram_tve1",
"dram_output",
"dram_de_fe1", "dram_de_fe0",
"dram_de_be0", "dram_de_be1",
"dram_de_mp", "dram_ace";
};
ve_clk: clk@01c2013c {
#clock-cells = <0>;
#reset-cells = <0>;
compatible = "allwinner,sun4i-a10-ve-clk";
reg = <0x01c2013c 0x4>;
clocks = <&pll4>;
clock-output-names = "ve";
};
codec_clk: clk@01c20140 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-codec-clk";
reg = <0x01c20140 0x4>;
clocks = <&pll2 SUN4I_A10_PLL2_1X>;
clock-output-names = "codec";
};
mbus_clk: clk@01c2015c {
#clock-cells = <0>;
compatible = "allwinner,sun5i-a13-mbus-clk";
reg = <0x01c2015c 0x4>;
clocks = <&osc24M>, <&pll6 2>, <&pll5 1>;
clock-output-names = "mbus";
};
/*
* The following two are dummy clocks, placeholders
* used in the gmac_tx clock. The gmac driver will
* choose one parent depending on the PHY interface
* mode, using clk_set_rate auto-reparenting.
*
* The actual TX clock rate is not controlled by the
* gmac_tx clock.
*/
mii_phy_tx_clk: clk@2 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <25000000>;
clock-output-names = "mii_phy_tx";
};
gmac_int_tx_clk: clk@3 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <125000000>;
clock-output-names = "gmac_int_tx";
};
gmac_tx_clk: clk@01c20164 {
#clock-cells = <0>;
compatible = "allwinner,sun7i-a20-gmac-clk";
reg = <0x01c20164 0x4>;
clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>;
clock-output-names = "gmac_tx";
};
/*
* Dummy clock used by output clocks
*/
osc24M_32k: clk@1 {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <750>;
clock-mult = <1>;
clocks = <&osc24M>;
clock-output-names = "osc24M_32k";
};
clk_out_a: clk@01c201f0 {
#clock-cells = <0>;
compatible = "allwinner,sun7i-a20-out-clk";
reg = <0x01c201f0 0x4>;
clocks = <&osc24M_32k>, <&osc32k>, <&osc24M>;
clock-output-names = "clk_out_a";
};
clk_out_b: clk@01c201f4 {
#clock-cells = <0>;
compatible = "allwinner,sun7i-a20-out-clk";
reg = <0x01c201f4 0x4>;
clocks = <&osc24M_32k>, <&osc32k>, <&osc24M>;
clock-output-names = "clk_out_b";
};
};
soc@01c00000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
sram-controller@01c00000 {
compatible = "allwinner,sun4i-a10-sram-controller";
reg = <0x01c00000 0x30>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
sram_a: sram@00000000 {
compatible = "mmio-sram";
reg = <0x00000000 0xc000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x00000000 0xc000>;
emac_sram: sram-section@8000 {
compatible = "allwinner,sun4i-a10-sram-a3-a4";
reg = <0x8000 0x4000>;
status = "disabled";
};
};
sram_d: sram@00010000 {
compatible = "mmio-sram";
reg = <0x00010000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x00010000 0x1000>;
otg_sram: sram-section@0000 {
compatible = "allwinner,sun4i-a10-sram-d";
reg = <0x0000 0x1000>;
status = "disabled";
};
};
};
nmi_intc: interrupt-controller@01c00030 {
compatible = "allwinner,sun7i-a20-sc-nmi";
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x01c00030 0x0c>;
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
};
dma: dma-controller@01c02000 {
compatible = "allwinner,sun4i-a10-dma";
reg = <0x01c02000 0x1000>;
interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ahb_gates 6>;
#dma-cells = <2>;
};
spi0: spi@01c05000 {
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c05000 0x1000>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ahb_gates 20>, <&spi0_clk>;
clock-names = "ahb", "mod";
dmas = <&dma SUN4I_DMA_DEDICATED 27>,
<&dma SUN4I_DMA_DEDICATED 26>;
dma-names = "rx", "tx";
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
spi1: spi@01c06000 {
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c06000 0x1000>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ahb_gates 21>, <&spi1_clk>;
clock-names = "ahb", "mod";
dmas = <&dma SUN4I_DMA_DEDICATED 9>,
<&dma SUN4I_DMA_DEDICATED 8>;
dma-names = "rx", "tx";
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
emac: ethernet@01c0b000 {
compatible = "allwinner,sun4i-a10-emac";
reg = <0x01c0b000 0x1000>;
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ahb_gates 17>;
allwinner,sram = <&emac_sram 1>;
status = "disabled";
};
mdio: mdio@01c0b080 {
compatible = "allwinner,sun4i-a10-mdio";
reg = <0x01c0b080 0x14>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
mmc0: mmc@01c0f000 {
compatible = "allwinner,sun5i-a13-mmc";
reg = <0x01c0f000 0x1000>;
clocks = <&ahb_gates 8>,
<&mmc0_clk 0>,
<&mmc0_clk 1>,
<&mmc0_clk 2>;
clock-names = "ahb",
"mmc",
"output",
"sample";
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
mmc1: mmc@01c10000 {
compatible = "allwinner,sun5i-a13-mmc";
reg = <0x01c10000 0x1000>;
clocks = <&ahb_gates 9>,
<&mmc1_clk 0>,
<&mmc1_clk 1>,
<&mmc1_clk 2>;
clock-names = "ahb",
"mmc",
"output",
"sample";
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
mmc2: mmc@01c11000 {
compatible = "allwinner,sun5i-a13-mmc";
reg = <0x01c11000 0x1000>;
clocks = <&ahb_gates 10>,
<&mmc2_clk 0>,
<&mmc2_clk 1>,
<&mmc2_clk 2>;
clock-names = "ahb",
"mmc",
"output",
"sample";
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
mmc3: mmc@01c12000 {
compatible = "allwinner,sun5i-a13-mmc";
reg = <0x01c12000 0x1000>;
clocks = <&ahb_gates 11>,
<&mmc3_clk 0>,
<&mmc3_clk 1>,
<&mmc3_clk 2>;
clock-names = "ahb",
"mmc",
"output",
"sample";
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
usb_otg: usb@01c13000 {
compatible = "allwinner,sun4i-a10-musb";
reg = <0x01c13000 0x0400>;
clocks = <&ahb_gates 0>;
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "mc";
phys = <&usbphy 0>;
phy-names = "usb";
extcon = <&usbphy 0>;
allwinner,sram = <&otg_sram 1>;
status = "disabled";
};
usbphy: phy@01c13400 {
#phy-cells = <1>;
compatible = "allwinner,sun7i-a20-usb-phy";
reg = <0x01c13400 0x10 0x01c14800 0x4 0x01c1c800 0x4>;
reg-names = "phy_ctrl", "pmu1", "pmu2";
clocks = <&usb_clk 8>;
clock-names = "usb_phy";
resets = <&usb_clk 0>, <&usb_clk 1>, <&usb_clk 2>;
reset-names = "usb0_reset", "usb1_reset", "usb2_reset";
status = "disabled";
};
ehci0: usb@01c14000 {
compatible = "allwinner,sun7i-a20-ehci", "generic-ehci";
reg = <0x01c14000 0x100>;
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ahb_gates 1>;
phys = <&usbphy 1>;
phy-names = "usb";
status = "disabled";
};
ohci0: usb@01c14400 {
compatible = "allwinner,sun7i-a20-ohci", "generic-ohci";
reg = <0x01c14400 0x100>;
interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&usb_clk 6>, <&ahb_gates 2>;
phys = <&usbphy 1>;
phy-names = "usb";
status = "disabled";
};
crypto: crypto-engine@01c15000 {
compatible = "allwinner,sun4i-a10-crypto";
reg = <0x01c15000 0x1000>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ahb_gates 5>, <&ss_clk>;
clock-names = "ahb", "mod";
};
spi2: spi@01c17000 {
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c17000 0x1000>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ahb_gates 22>, <&spi2_clk>;
clock-names = "ahb", "mod";
dmas = <&dma SUN4I_DMA_DEDICATED 29>,
<&dma SUN4I_DMA_DEDICATED 28>;
dma-names = "rx", "tx";
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
ahci: sata@01c18000 {
compatible = "allwinner,sun4i-a10-ahci";
reg = <0x01c18000 0x1000>;
interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&pll6 0>, <&ahb_gates 25>;
status = "disabled";
};
ehci1: usb@01c1c000 {
compatible = "allwinner,sun7i-a20-ehci", "generic-ehci";
reg = <0x01c1c000 0x100>;
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ahb_gates 3>;
phys = <&usbphy 2>;
phy-names = "usb";
status = "disabled";
};
ohci1: usb@01c1c400 {
compatible = "allwinner,sun7i-a20-ohci", "generic-ohci";
reg = <0x01c1c400 0x100>;
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&usb_clk 7>, <&ahb_gates 4>;
phys = <&usbphy 2>;
phy-names = "usb";
status = "disabled";
};
spi3: spi@01c1f000 {
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c1f000 0x1000>;
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ahb_gates 23>, <&spi3_clk>;
clock-names = "ahb", "mod";
dmas = <&dma SUN4I_DMA_DEDICATED 31>,
<&dma SUN4I_DMA_DEDICATED 30>;
dma-names = "rx", "tx";
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
can0: can@01c2bc00 {
compatible = "allwinner,sun4i-a10-can";
reg = <0x01c2bc00 0x400>;
interrupts = <0 26 4>;
clocks = <&apb1_gates 4>;
status = "disabled";
};
pio: pinctrl@01c20800 {
compatible = "allwinner,sun7i-a20-pinctrl";
reg = <0x01c20800 0x400>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb0_gates 5>;
gpio-controller;
interrupt-controller;
#interrupt-cells = <3>;
#gpio-cells = <3>;
pwm0_pins_a: pwm0@0 {
allwinner,pins = "PB2";
allwinner,function = "pwm";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
pwm1_pins_a: pwm1@0 {
allwinner,pins = "PI3";
allwinner,function = "pwm";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
uart0_pins_a: uart0@0 {
allwinner,pins = "PB22", "PB23";
allwinner,function = "uart0";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
uart2_pins_a: uart2@0 {
allwinner,pins = "PI16", "PI17", "PI18", "PI19";
allwinner,function = "uart2";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
uart3_pins_a: uart3@0 {
allwinner,pins = "PG6", "PG7", "PG8", "PG9";
allwinner,function = "uart3";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
uart3_pins_b: uart3@1 {
allwinner,pins = "PH0", "PH1";
allwinner,function = "uart3";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
uart4_pins_a: uart4@0 {
allwinner,pins = "PG10", "PG11";
allwinner,function = "uart4";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
uart4_pins_b: uart4@1 {
allwinner,pins = "PH4", "PH5";
allwinner,function = "uart4";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
uart5_pins_a: uart5@0 {
allwinner,pins = "PI10", "PI11";
allwinner,function = "uart5";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
uart6_pins_a: uart6@0 {
allwinner,pins = "PI12", "PI13";
allwinner,function = "uart6";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
uart7_pins_a: uart7@0 {
allwinner,pins = "PI20", "PI21";
allwinner,function = "uart7";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
i2c0_pins_a: i2c0@0 {
allwinner,pins = "PB0", "PB1";
allwinner,function = "i2c0";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
i2c1_pins_a: i2c1@0 {
allwinner,pins = "PB18", "PB19";
allwinner,function = "i2c1";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
i2c2_pins_a: i2c2@0 {
allwinner,pins = "PB20", "PB21";
allwinner,function = "i2c2";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
i2c3_pins_a: i2c3@0 {
allwinner,pins = "PI0", "PI1";
allwinner,function = "i2c3";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
emac_pins_a: emac0@0 {
allwinner,pins = "PA0", "PA1", "PA2",
"PA3", "PA4", "PA5", "PA6",
"PA7", "PA8", "PA9", "PA10",
"PA11", "PA12", "PA13", "PA14",
"PA15", "PA16";
allwinner,function = "emac";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
clk_out_a_pins_a: clk_out_a@0 {
allwinner,pins = "PI12";
allwinner,function = "clk_out_a";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
clk_out_b_pins_a: clk_out_b@0 {
allwinner,pins = "PI13";
allwinner,function = "clk_out_b";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
gmac_pins_mii_a: gmac_mii@0 {
allwinner,pins = "PA0", "PA1", "PA2",
"PA3", "PA4", "PA5", "PA6",
"PA7", "PA8", "PA9", "PA10",
"PA11", "PA12", "PA13", "PA14",
"PA15", "PA16";
allwinner,function = "gmac";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
gmac_pins_rgmii_a: gmac_rgmii@0 {
allwinner,pins = "PA0", "PA1", "PA2",
"PA3", "PA4", "PA5", "PA6",
"PA7", "PA8", "PA10",
"PA11", "PA12", "PA13",
"PA15", "PA16";
allwinner,function = "gmac";
/*
* data lines in RGMII mode use DDR mode
* and need a higher signal drive strength
*/
allwinner,drive = <SUN4I_PINCTRL_40_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
spi0_pins_a: spi0@0 {
allwinner,pins = "PI11", "PI12", "PI13";
allwinner,function = "spi0";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
spi0_cs0_pins_a: spi0_cs0@0 {
allwinner,pins = "PI10";
allwinner,function = "spi0";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
spi0_cs1_pins_a: spi0_cs1@0 {
allwinner,pins = "PI14";
allwinner,function = "spi0";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
spi1_pins_a: spi1@0 {
allwinner,pins = "PI17", "PI18", "PI19";
allwinner,function = "spi1";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
spi1_cs0_pins_a: spi1_cs0@0 {
allwinner,pins = "PI16";
allwinner,function = "spi1";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
spi2_pins_a: spi2@0 {
allwinner,pins = "PC20", "PC21", "PC22";
allwinner,function = "spi2";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
spi2_pins_b: spi2@1 {
allwinner,pins = "PB15", "PB16", "PB17";
allwinner,function = "spi2";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
spi2_cs0_pins_a: spi2_cs0@0 {
allwinner,pins = "PC19";
allwinner,function = "spi2";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
spi2_cs0_pins_b: spi2_cs0@1 {
allwinner,pins = "PB14";
allwinner,function = "spi2";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
mmc0_pins_a: mmc0@0 {
allwinner,pins = "PF0", "PF1", "PF2",
"PF3", "PF4", "PF5";
allwinner,function = "mmc0";
allwinner,drive = <SUN4I_PINCTRL_30_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
mmc0_cd_pin_reference_design: mmc0_cd_pin@0 {
allwinner,pins = "PH1";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
mmc2_pins_a: mmc2@0 {
allwinner,pins = "PC6", "PC7", "PC8",
"PC9", "PC10", "PC11";
allwinner,function = "mmc2";
allwinner,drive = <SUN4I_PINCTRL_30_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
mmc3_pins_a: mmc3@0 {
allwinner,pins = "PI4", "PI5", "PI6",
"PI7", "PI8", "PI9";
allwinner,function = "mmc3";
allwinner,drive = <SUN4I_PINCTRL_30_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
ir0_rx_pins_a: ir0@0 {
allwinner,pins = "PB4";
allwinner,function = "ir0";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
ir0_tx_pins_a: ir0@1 {
allwinner,pins = "PB3";
allwinner,function = "ir0";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
ir1_rx_pins_a: ir1@0 {
allwinner,pins = "PB23";
allwinner,function = "ir1";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
ir1_tx_pins_a: ir1@1 {
allwinner,pins = "PB22";
allwinner,function = "ir1";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
ps20_pins_a: ps20@0 {
allwinner,pins = "PI20", "PI21";
allwinner,function = "ps2";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
ps21_pins_a: ps21@0 {
allwinner,pins = "PH12", "PH13";
allwinner,function = "ps2";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
can0_pins_a: can0@0 {
allwinner,pins = "PH20","PH21";
allwinner,function = "can";
allwinner,drive = <0>;
allwinner,pull = <0>;
};
};
timer@01c20c00 {
compatible = "allwinner,sun4i-a10-timer";
reg = <0x01c20c00 0x90>;
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&osc24M>;
};
wdt: watchdog@01c20c90 {
compatible = "allwinner,sun4i-a10-wdt";
reg = <0x01c20c90 0x10>;
};
rtc: rtc@01c20d00 {
compatible = "allwinner,sun7i-a20-rtc";
reg = <0x01c20d00 0x20>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
};
pwm: pwm@01c20e00 {
compatible = "allwinner,sun7i-a20-pwm";
reg = <0x01c20e00 0xc>;
clocks = <&osc24M>;
#pwm-cells = <3>;
status = "disabled";
};
ir0: ir@01c21800 {
compatible = "allwinner,sun4i-a10-ir";
clocks = <&apb0_gates 6>, <&ir0_clk>;
clock-names = "apb", "ir";
interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x01c21800 0x40>;
status = "disabled";
};
ir1: ir@01c21c00 {
compatible = "allwinner,sun4i-a10-ir";
clocks = <&apb0_gates 7>, <&ir1_clk>;
clock-names = "apb", "ir";
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x01c21c00 0x40>;
status = "disabled";
};
lradc: lradc@01c22800 {
compatible = "allwinner,sun4i-a10-lradc-keys";
reg = <0x01c22800 0x100>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
codec: codec@01c22c00 {
#sound-dai-cells = <0>;
compatible = "allwinner,sun7i-a20-codec";
reg = <0x01c22c00 0x40>;
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb0_gates 0>, <&codec_clk>;
clock-names = "apb", "codec";
dmas = <&dma SUN4I_DMA_NORMAL 19>,
<&dma SUN4I_DMA_NORMAL 19>;
dma-names = "rx", "tx";
status = "disabled";
};
sid: eeprom@01c23800 {
compatible = "allwinner,sun7i-a20-sid";
reg = <0x01c23800 0x200>;
};
rtp: rtp@01c25000 {
compatible = "allwinner,sun5i-a13-ts";
reg = <0x01c25000 0x100>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
#thermal-sensor-cells = <0>;
};
uart0: serial@01c28000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28000 0x400>;
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb1_gates 16>;
status = "disabled";
};
uart1: serial@01c28400 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28400 0x400>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb1_gates 17>;
status = "disabled";
};
uart2: serial@01c28800 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28800 0x400>;
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb1_gates 18>;
status = "disabled";
};
uart3: serial@01c28c00 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28c00 0x400>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb1_gates 19>;
status = "disabled";
};
uart4: serial@01c29000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c29000 0x400>;
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb1_gates 20>;
status = "disabled";
};
uart5: serial@01c29400 {
compatible = "snps,dw-apb-uart";
reg = <0x01c29400 0x400>;
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb1_gates 21>;
status = "disabled";
};
uart6: serial@01c29800 {
compatible = "snps,dw-apb-uart";
reg = <0x01c29800 0x400>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb1_gates 22>;
status = "disabled";
};
uart7: serial@01c29c00 {
compatible = "snps,dw-apb-uart";
reg = <0x01c29c00 0x400>;
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb1_gates 23>;
status = "disabled";
};
i2c0: i2c@01c2ac00 {
compatible = "allwinner,sun7i-a20-i2c",
"allwinner,sun4i-a10-i2c";
reg = <0x01c2ac00 0x400>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb1_gates 0>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
i2c1: i2c@01c2b000 {
compatible = "allwinner,sun7i-a20-i2c",
"allwinner,sun4i-a10-i2c";
reg = <0x01c2b000 0x400>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb1_gates 1>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
i2c2: i2c@01c2b400 {
compatible = "allwinner,sun7i-a20-i2c",
"allwinner,sun4i-a10-i2c";
reg = <0x01c2b400 0x400>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb1_gates 2>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
i2c3: i2c@01c2b800 {
compatible = "allwinner,sun7i-a20-i2c",
"allwinner,sun4i-a10-i2c";
reg = <0x01c2b800 0x400>;
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb1_gates 3>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
i2c4: i2c@01c2c000 {
compatible = "allwinner,sun7i-a20-i2c",
"allwinner,sun4i-a10-i2c";
reg = <0x01c2c000 0x400>;
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb1_gates 15>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
gmac: ethernet@01c50000 {
compatible = "allwinner,sun7i-a20-gmac";
reg = <0x01c50000 0x10000>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
clocks = <&ahb_gates 49>, <&gmac_tx_clk>;
clock-names = "stmmaceth", "allwinner_gmac_tx";
snps,pbl = <2>;
snps,fixed-burst;
snps,force_sf_dma_mode;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
hstimer@01c60000 {
compatible = "allwinner,sun7i-a20-hstimer";
reg = <0x01c60000 0x1000>;
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ahb_gates 28>;
};
gic: interrupt-controller@01c81000 {
compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
reg = <0x01c81000 0x1000>,
<0x01c82000 0x1000>,
<0x01c84000 0x2000>,
<0x01c86000 0x2000>;
interrupt-controller;
#interrupt-cells = <3>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
ps20: ps2@01c2a000 {
compatible = "allwinner,sun4i-a10-ps2";
reg = <0x01c2a000 0x400>;
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb1_gates 6>;
status = "disabled";
};
ps21: ps2@01c2a400 {
compatible = "allwinner,sun4i-a10-ps2";
reg = <0x01c2a400 0x400>;
interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb1_gates 7>;
status = "disabled";
};
};
};