Skip to contentSkip to conversation

PCI: hisi: Add PCIe host support for HiSilicon SoC Hip05

PATCH Superseded Zhou Wang 3 participants 14 messages Sep 15, 2015 – Sep 23, 2015

Subsystems (4)

v9 of 13 Superseded Latest is v13 →

lore
Share & tools
lore

Zhou Wang

author
#0 lore raw

v9 cover PCI: hisi: Add PCIe host support for HiSilicon SoC Hip05

This patchset adds PCIe host support for HiSilicon SoC Hip05. The PCIe hosts use PCIe IP core from Synopsys, So this driver is based on designware PCIe driver.

Hip05 is an ARMv8 architecture SoC. It should be able to use ARM64 PCIe API in designware PCIe driver. So this patch also adds ARM64 support for designware pcie.

This patchset is based on v4.3-rc1.

Change from v8:
- Rebase on v4.3-rc1.
- Add Tested-by from Gabriel and Minghuan.
- Remove ITS domain parsing in msi_host_init in pcie-hisi.c, no need this as PCI core does related job. Add ITS base address parsing in msi_host_init.
- Change vmid/asid table configuration, previous configuration was wrong.
- Add wr_own_conf callback in pcie-hisi.c.
- Use subsys_initcall to init hisi PCIe.

Change from v7:
- Remove pp->root_bus_nr = 0 in dra7xx, exynos, imx6, keystone, layerscape, spear13xx. Pass pp->busn->start to pci_create_root_bus as root bus number.
- Remove bus-range parsing in pcie-hisi.c.

Change from v6:
- Add Pratyush's Acked-by for 1/6 and 2/6.
- Add James' Tested-by for 3/6.

Change from v5:
- Merge 1/6 in this series, discussion about this can be found in [1]

Change from v4:
- Change the author of 1/5 to Gabriele.
- Modify problems in 3/5 pointed by Bjorn.
- Modify spelling problems in 4/5.

Change from v3:
- Change 1/5 to what Gabriele suggested.
- Use win->__res.start to get *_mod_base in 2/5, this fix a bug in v3 series.

Change from v2:
- Move struct pci_dev *dev and struct pci_sys_data *sys in pcibios_align_resource in 1/5.
- Add Gabriele's codes in 2/5 which delete unnecessary information parse and use of_pci_get_host_bridge_resources for both ARM32 and ARM64.
- Add maintainer patch 5/5.

Change from RFC v1:
- Add 1/4 patch by Arnd which removes align_resource callback in ARM pcibios_align_resource.
- Change head file in pcie-designware from asm/hardirq.h to linux/hardirq.h.
- Set pp->root_bus_nr = 0 in dra7xx, exynos, imx6, keystone, layerscape, spear13xx.
- Remove unnecessary parentheses of some macros in pcie-hisi.
- Use macro to replace some magic values.
- Merge two loops together and add some comments about it in context_config function in pcie-hisi.
- Modify some value of items in pcie node example in binding document.

Change from RFC:
- delete dw_pcie_setup, dw_pcie_scan_bus, dw_pcie_map_irq and struct hw_pci, merge related operations into dw_pcie_host_init.

Link of v8:
- http://www.spinics.net/lists/linux-pci/msg44192.html
Link of v7:
- http://www.spinics.net/lists/devicetree/msg90690.html
Link of v6:
- http://www.spinics.net/lists/linux-pci/msg43669.html
Link of v5:
- http://www.spinics.net/lists/devicetree/msg87959.html
Link of v4:
- http://www.spinics.net/lists/arm-kernel/msg433050.html
Link of v3:
- http://www.spinics.net/lists/linux-pci/msg42539.html
Link of v2:
- http://www.spinics.net/lists/linux-pci/msg41844.html
Link of RFC v1:
- http://www.spinics.net/lists/linux-pci/msg41305.html
Link of RFC:
- http://www.spinics.net/lists/linux-pci/msg40434.html

[1] http://lists.infradead.org/pipermail/linux-arm-kernel/2015-July/359741.html

Zhou Wang (4):
PCI: designware: Add ARM64 support
PCI: hisi: Add PCIe host support for HiSilicon SoC Hip05
Documentation: DT: Add HiSilicon PCIe host binding
MAINTAINERS: Add pcie-hisi maintainer

gabriele paoloni (2):
PCI: designware: move calculation of bus addresses to DRA7xx ARM/PCI: remove align_resource in pci_sys_data

 .../devicetree/bindings/pci/hisilicon-pcie.txt     |  46 +++
 MAINTAINERS                                        |   7 +
 arch/arm/include/asm/mach/pci.h                    |   6 -
 arch/arm/kernel/bios32.c                           |  12 +-
 drivers/pci/host/Kconfig                           |   8 +
 drivers/pci/host/Makefile                          |   1 +
 drivers/pci/host/pci-dra7xx.c                      |  13 +
 drivers/pci/host/pci-keystone-dw.c                 |   2 +-
 drivers/pci/host/pcie-designware.c                 | 245 +++++-----------
 drivers/pci/host/pcie-designware.h                 |  14 +-
 drivers/pci/host/pcie-hisi.c                       | 310 +++++++++++++++++++++
 11 files changed, 476 insertions(+), 188 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
 create mode 100644 drivers/pci/host/pcie-hisi.c
Signature · 1 line
1.9.1
author
#1 lore raw

PATCH v9 1/6 PCI: designware: move calculation of bus addresses to DRA7xx

From: gabriele paoloni <[email protected]>

Commit f4c55c5a3f7f ("PCI: designware: Program ATU with untranslated address") added the calculation of PCI BUS addresses in designware, storing them in new fields added in "struct pcie_port". This calculation is done for every designware user even if is only applicable to DRA7xx.
This patch moves the calculation of the bus addresses to the DRA7xx driver and is needed to allow the rework of designware to use the new DT parsing API.

---
 drivers/pci/host/pci-dra7xx.c      | 13 +++++++++++++
 drivers/pci/host/pcie-designware.c | 15 ++++-----------
 2 files changed, 17 insertions(+), 11 deletions(-)
drivers/pci/host/pci-dra7xx.c +13 -0
index 199e29a..ebdffa0 100644
@@ -62,6 +62,7 @@
 
 #define	PCIECTRL_DRA7XX_CONF_PHY_CS			0x010C
 #define	LINK_UP						BIT(16)
+#define	CPU_TO_BUS_ADDR					0x0FFFFFFF
 
 struct dra7xx_pcie {
 	void __iomem		*base;
@@ -151,6 +152,18 @@ static void dra7xx_pcie_enable_interrupts(struct pcie_port *pp)
 static void dra7xx_pcie_host_init(struct pcie_port *pp)
 {
 	dw_pcie_setup_rc(pp);
+
+	if (pp->io_mod_base)
+		pp->io_mod_base &= CPU_TO_BUS_ADDR;
+
+	if (pp->mem_mod_base)
+		pp->mem_mod_base &= CPU_TO_BUS_ADDR;
+
+	if (pp->cfg0_mod_base) {
+		pp->cfg0_mod_base &= CPU_TO_BUS_ADDR;
+		pp->cfg1_mod_base &= CPU_TO_BUS_ADDR;
+	}
+
 	dra7xx_pcie_establish_link(pp);
 	if (IS_ENABLED(CONFIG_PCI_MSI))
 		dw_pcie_msi_init(pp);
drivers/pci/host/pcie-designware.c +4 -11
index 52aa6e3..75338a6 100644
@@ -365,14 +365,10 @@ int dw_pcie_host_init(struct pcie_port *pp)
 	struct of_pci_range range;
 	struct of_pci_range_parser parser;
 	struct resource *cfg_res;
-	u32 val, na, ns;
+	u32 val, ns;
 	const __be32 *addrp;
 	int i, index, ret;
 
-	/* Find the address cell size and the number of cells in order to get
-	 * the untranslated address.
-	 */
-	of_property_read_u32(np, "#address-cells", &na);
 	ns = of_n_size_cells(np);
 
 	cfg_res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "config");
@@ -415,8 +411,7 @@ int dw_pcie_host_init(struct pcie_port *pp)
 			pp->io_base = range.cpu_addr;
 
 			/* Find the untranslated IO space address */
-			pp->io_mod_base = of_read_number(parser.range -
-							 parser.np + na, ns);
+			pp->io_mod_base = range.cpu_addr;
 		}
 		if (restype == IORESOURCE_MEM) {
 			of_pci_range_to_resource(&range, np, &pp->mem);
@@ -425,8 +420,7 @@ int dw_pcie_host_init(struct pcie_port *pp)
 			pp->mem_bus_addr = range.pci_addr;
 
 			/* Find the untranslated MEM space address */
-			pp->mem_mod_base = of_read_number(parser.range -
-							  parser.np + na, ns);
+			pp->mem_mod_base = range.cpu_addr;
 		}
 		if (restype == 0) {
 			of_pci_range_to_resource(&range, np, &pp->cfg);
@@ -436,8 +430,7 @@ int dw_pcie_host_init(struct pcie_port *pp)
 			pp->cfg1_base = pp->cfg.start + pp->cfg0_size;
 
 			/* Find the untranslated configuration space address */
-			pp->cfg0_mod_base = of_read_number(parser.range -
-							   parser.np + na, ns);
+			pp->cfg0_mod_base = range.cpu_addr;
 			pp->cfg1_mod_base = pp->cfg0_mod_base +
 					    pp->cfg0_size;
 		}
Signature · 1 line
1.9.1
author
#2 lore raw

PATCH v9 2/6 ARM/PCI: remove align_resource in pci_sys_data

In reply to Zhou Wang

From: gabriele paoloni <[email protected]>

This patch is needed in order to unify the PCIe designware framework for ARM and ARM64 architectures. In the PCIe designware unification process we are calling pci_create_root_bus() passing a "sysdata" parameter that is the same for both ARM and ARM64 and is of type "struct pcie_port*". In the ARM case this will cause a problem with the function pcibios_align_resource(); in fact this will cast "dev->sysdata" to "struct pci_sys_data*", whereas designware had passed a "struct pcie_port*" pointer.

This patch solves the issue by removing "align_resource" from "pci_sys_data" struct and defining a static global function pointer in "bios32.c"

---
 arch/arm/include/asm/mach/pci.h |  6 ------
 arch/arm/kernel/bios32.c        | 12 ++++++++----
 2 files changed, 8 insertions(+), 10 deletions(-)
arch/arm/include/asm/mach/pci.h +0 -6
index 8857d28..0070e85 100644
@@ -52,12 +52,6 @@ struct pci_sys_data {
 	u8		(*swizzle)(struct pci_dev *, u8 *);
 					/* IRQ mapping				*/
 	int		(*map_irq)(const struct pci_dev *, u8, u8);
-					/* Resource alignement requirements	*/
-	resource_size_t (*align_resource)(struct pci_dev *dev,
-					  const struct resource *res,
-					  resource_size_t start,
-					  resource_size_t size,
-					  resource_size_t align);
 	void		*private_data;	/* platform controller private data	*/
 };
 
arch/arm/kernel/bios32.c +8 -4
index 874e182..6551d28 100644
@@ -17,6 +17,11 @@
 #include <asm/mach/pci.h>
 
 static int debug_pci;
+static resource_size_t (*align_resource)(struct pci_dev *dev,
+		  const struct resource *res,
+		  resource_size_t start,
+		  resource_size_t size,
+		  resource_size_t align) = NULL;
 
 /*
  * We can't use pci_get_device() here since we are
@@ -456,7 +461,7 @@ static void pcibios_init_hw(struct device *parent, struct hw_pci *hw,
 		sys->busnr   = busnr;
 		sys->swizzle = hw->swizzle;
 		sys->map_irq = hw->map_irq;
-		sys->align_resource = hw->align_resource;
+		align_resource = hw->align_resource;
 		INIT_LIST_HEAD(&sys->resources);
 
 		if (hw->private_data)
@@ -572,7 +577,6 @@ resource_size_t pcibios_align_resource(void *data, const struct resource *res,
 				resource_size_t size, resource_size_t align)
 {
 	struct pci_dev *dev = data;
-	struct pci_sys_data *sys = dev->sysdata;
 	resource_size_t start = res->start;
 
 	if (res->flags & IORESOURCE_IO && start & 0x300)
@@ -580,8 +584,8 @@ resource_size_t pcibios_align_resource(void *data, const struct resource *res,
 
 	start = (start + align - 1) & ~(align - 1);
 
-	if (sys->align_resource)
-		return sys->align_resource(dev, res, start, size, align);
+	if (align_resource)
+		return align_resource(dev, res, start, size, align);
 
 	return start;
 }
Signature · 1 line
1.9.1
author
#3 lore raw

PATCH v9 3/6 PCI: designware: Add ARM64 support

In reply to Zhou Wang

This patch tries to unify ARM32 and ARM64 PCIe in designware driver. Delete function dw_pcie_setup, dw_pcie_scan_bus, dw_pcie_map_irq and struct hw_pci, move related operations to dw_pcie_host_init.

This patch also try to use of_pci_get_host_bridge_resources for ARM32 and ARM64 according to the suggestion for Gabriele[1]

This patch reverts commit f4c55c5a3f7f ("PCI: designware: Program ATU with untranslated address") based on 1/6 in this series. we delete *_mod_base in pcie-designware. This was discussed in [2]

I have compiled the driver with multi_v7_defconfig. However, I don't have ARM32 PCIe related board to do test. It will be appreciated if someone could help to test it.

[1] http://www.spinics.net/lists/linux-pci/msg42194.html
[2] http://www.spinics.net/lists/arm-kernel/msg436779.html

---
 drivers/pci/host/pci-dra7xx.c      |  14 +--
 drivers/pci/host/pci-keystone-dw.c |   2 +-
 drivers/pci/host/pcie-designware.c | 238 ++++++++++++-------------------------
 drivers/pci/host/pcie-designware.h |  14 +--
 4 files changed, 90 insertions(+), 178 deletions(-)
drivers/pci/host/pci-dra7xx.c +7 -7
index ebdffa0..b88c248 100644
@@ -153,15 +153,15 @@ static void dra7xx_pcie_host_init(struct pcie_port *pp)
 {
 	dw_pcie_setup_rc(pp);
 
-	if (pp->io_mod_base)
-		pp->io_mod_base &= CPU_TO_BUS_ADDR;
+	if (pp->io_base)
+		pp->io_base &= CPU_TO_BUS_ADDR;
 
-	if (pp->mem_mod_base)
-		pp->mem_mod_base &= CPU_TO_BUS_ADDR;
+	if (pp->mem_base)
+		pp->mem_base &= CPU_TO_BUS_ADDR;
 
-	if (pp->cfg0_mod_base) {
-		pp->cfg0_mod_base &= CPU_TO_BUS_ADDR;
-		pp->cfg1_mod_base &= CPU_TO_BUS_ADDR;
+	if (pp->cfg0_base) {
+		pp->cfg0_base &= CPU_TO_BUS_ADDR;
+		pp->cfg1_base &= CPU_TO_BUS_ADDR;
 	}
 
 	dra7xx_pcie_establish_link(pp);
drivers/pci/host/pci-keystone-dw.c +1 -1
index e71da99..8062ddb 100644
@@ -322,7 +322,7 @@ static void ks_dw_pcie_clear_dbi_mode(void __iomem *reg_virt)
 void ks_dw_pcie_setup_rc_app_regs(struct keystone_pcie *ks_pcie)
 {
 	struct pcie_port *pp = &ks_pcie->pp;
-	u32 start = pp->mem.start, end = pp->mem.end;
+	u32 start = pp->mem->start, end = pp->mem->end;
 	int i, tr_size;
 
 	/* Disable BARs for inbound access */
drivers/pci/host/pcie-designware.c +77 -161

361 lines not on this page · raw message

drivers/pci/host/pcie-designware.h +5 -9
index d0bbd27..264c969 100644
@@ -27,25 +27,21 @@ struct pcie_port {
 	u8			root_bus_nr;
 	void __iomem		*dbi_base;
 	u64			cfg0_base;
-	u64			cfg0_mod_base;
 	void __iomem		*va_cfg0_base;
 	u32			cfg0_size;
 	u64			cfg1_base;
-	u64			cfg1_mod_base;
 	void __iomem		*va_cfg1_base;
 	u32			cfg1_size;
-	u64			io_base;
-	u64			io_mod_base;
+	resource_size_t		io_base;
 	phys_addr_t		io_bus_addr;
 	u32			io_size;
 	u64			mem_base;
-	u64			mem_mod_base;
 	phys_addr_t		mem_bus_addr;
 	u32			mem_size;
-	struct resource		cfg;
-	struct resource		io;
-	struct resource		mem;
-	struct resource		busn;
+	struct resource		*cfg;
+	struct resource		*io;
+	struct resource		*mem;
+	struct resource		*busn;
 	int			irq;
 	u32			lanes;
 	struct pcie_host_ops	*ops;
Signature · 1 line
1.9.1
author
#4 lore raw

PATCH v9 3/6 PCI: designware: Add ARM64 support

Hi Jingoo and Pratyush,

Could you help to review this patch if you have time?

Many Thanks,
Zhou

Quoted 488 lines · Zhou Wang

This patch tries to unify ARM32 and ARM64 PCIe in designware driver. Delete function dw_pcie_setup, dw_pcie_scan_bus, dw_pcie_map_irq and struct hw_pci, move related operations to dw_pcie_host_init.

This patch also try to use of_pci_get_host_bridge_resources for ARM32 and ARM64 according to the suggestion for Gabriele[1]

This patch reverts commit f4c55c5a3f7f ("PCI: designware: Program ATU with untranslated address") based on 1/6 in this series. we delete *_mod_base in pcie-designware. This was discussed in [2]

I have compiled the driver with multi_v7_defconfig. However, I don't have ARM32 PCIe related board to do test. It will be appreciated if someone could help to test it.

[1] http://www.spinics.net/lists/linux-pci/msg42194.html
[2] http://www.spinics.net/lists/arm-kernel/msg436779.html

---
 drivers/pci/host/pci-dra7xx.c      |  14 +--
 drivers/pci/host/pci-keystone-dw.c |   2 +-
 drivers/pci/host/pcie-designware.c | 238 ++++++++++++-------------------------
 drivers/pci/host/pcie-designware.h |  14 +--
 4 files changed, 90 insertions(+), 178 deletions(-)
drivers/pci/host/pci-dra7xx.c +7 -7
index ebdffa0..b88c248 100644
@@ -153,15 +153,15 @@ static void dra7xx_pcie_host_init(struct pcie_port *pp)
 {
 	dw_pcie_setup_rc(pp);
 
-	if (pp->io_mod_base)
-		pp->io_mod_base &= CPU_TO_BUS_ADDR;
+	if (pp->io_base)
+		pp->io_base &= CPU_TO_BUS_ADDR;
 
-	if (pp->mem_mod_base)
-		pp->mem_mod_base &= CPU_TO_BUS_ADDR;
+	if (pp->mem_base)
+		pp->mem_base &= CPU_TO_BUS_ADDR;
 
-	if (pp->cfg0_mod_base) {
-		pp->cfg0_mod_base &= CPU_TO_BUS_ADDR;
-		pp->cfg1_mod_base &= CPU_TO_BUS_ADDR;
+	if (pp->cfg0_base) {
+		pp->cfg0_base &= CPU_TO_BUS_ADDR;
+		pp->cfg1_base &= CPU_TO_BUS_ADDR;
 	}
 
 	dra7xx_pcie_establish_link(pp);
drivers/pci/host/pci-keystone-dw.c +1 -1
index e71da99..8062ddb 100644
@@ -322,7 +322,7 @@ static void ks_dw_pcie_clear_dbi_mode(void __iomem *reg_virt)
 void ks_dw_pcie_setup_rc_app_regs(struct keystone_pcie *ks_pcie)
 {
 	struct pcie_port *pp = &ks_pcie->pp;
-	u32 start = pp->mem.start, end = pp->mem.end;
+	u32 start = pp->mem->start, end = pp->mem->end;
 	int i, tr_size;
 
 	/* Disable BARs for inbound access */
drivers/pci/host/pcie-designware.c +77 -161
index 75338a6..8ef74da 100644
@@ -11,6 +11,7 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/hardirq.h>
 #include <linux/irq.h>
 #include <linux/irqdomain.h>
 #include <linux/kernel.h>
@@ -69,16 +70,7 @@
 #define PCIE_ATU_FUNC(x)		(((x) & 0x7) << 16)
 #define PCIE_ATU_UPPER_TARGET		0x91C
 
-static struct hw_pci dw_pci;
-
-static unsigned long global_io_offset;
-
-static inline struct pcie_port *sys_to_pcie(struct pci_sys_data *sys)
-{
-	BUG_ON(!sys->private_data);
-
-	return sys->private_data;
-}
+static struct pci_ops dw_pcie_ops;
 
 int dw_pcie_cfg_read(void __iomem *addr, int where, int size, u32 *val)
 {
@@ -255,7 +247,7 @@ static void dw_pcie_msi_set_irq(struct pcie_port *pp, int irq)
 static int assign_irq(int no_irqs, struct msi_desc *desc, int *pos)
 {
 	int irq, pos0, i;
-	struct pcie_port *pp = sys_to_pcie(msi_desc_to_pci_sysdata(desc));
+	struct pcie_port *pp = (struct pcie_port *) msi_desc_to_pci_sysdata(desc);
 
 	pos0 = bitmap_find_free_region(pp->msi_irq_in_use, MAX_MSI_IRQS,
 				       order_base_2(no_irqs));
@@ -298,7 +290,7 @@ static int dw_msi_setup_irq(struct msi_controller *chip, struct pci_dev *pdev,
 {
 	int irq, pos;
 	struct msi_msg msg;
-	struct pcie_port *pp = sys_to_pcie(pdev->bus->sysdata);
+	struct pcie_port *pp = pdev->bus->sysdata;
 
 	if (desc->msi_attrib.is_msix)
 		return -EINVAL;
@@ -327,7 +319,7 @@ static void dw_msi_teardown_irq(struct msi_controller *chip, unsigned int irq)
 {
 	struct irq_data *data = irq_get_irq_data(irq);
 	struct msi_desc *msi = irq_data_get_msi_desc(data);
-	struct pcie_port *pp = sys_to_pcie(msi_desc_to_pci_sysdata(msi));
+	struct pcie_port *pp = (struct pcie_port *) msi_desc_to_pci_sysdata(msi);
 
 	clear_irq_range(pp, irq, 1, data->hwirq);
 }
@@ -362,14 +354,12 @@ int dw_pcie_host_init(struct pcie_port *pp)
 {
 	struct device_node *np = pp->dev->of_node;
 	struct platform_device *pdev = to_platform_device(pp->dev);
-	struct of_pci_range range;
-	struct of_pci_range_parser parser;
+	struct pci_bus *bus;
 	struct resource *cfg_res;
-	u32 val, ns;
-	const __be32 *addrp;
-	int i, index, ret;
-
-	ns = of_n_size_cells(np);
+	LIST_HEAD(res);
+	u32 val;
+	int i, ret;
+	struct resource_entry *win;
 
 	cfg_res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "config");
 	if (cfg_res) {
@@ -377,85 +367,60 @@ int dw_pcie_host_init(struct pcie_port *pp)
 		pp->cfg1_size = resource_size(cfg_res)/2;
 		pp->cfg0_base = cfg_res->start;
 		pp->cfg1_base = cfg_res->start + pp->cfg0_size;
-
-		/* Find the untranslated configuration space address */
-		index = of_property_match_string(np, "reg-names", "config");
-		addrp = of_get_address(np, index, NULL, NULL);
-		pp->cfg0_mod_base = of_read_number(addrp, ns);
-		pp->cfg1_mod_base = pp->cfg0_mod_base + pp->cfg0_size;
 	} else if (!pp->va_cfg0_base) {
 		dev_err(pp->dev, "missing *config* reg space\n");
 	}
 
-	if (of_pci_range_parser_init(&parser, np)) {
-		dev_err(pp->dev, "missing ranges property\n");
-		return -EINVAL;
-	}
+	ret = of_pci_get_host_bridge_resources(np, 0, 0xff, &res, &pp->io_base);
+	if (ret)
+		return ret;
 
 	/* Get the I/O and memory ranges from DT */
-	for_each_of_pci_range(&parser, &range) {
-		unsigned long restype = range.flags & IORESOURCE_TYPE_BITS;
-
-		if (restype == IORESOURCE_IO) {
-			of_pci_range_to_resource(&range, np, &pp->io);
-			pp->io.name = "I/O";
-			pp->io.start = max_t(resource_size_t,
-					     PCIBIOS_MIN_IO,
-					     range.pci_addr + global_io_offset);
-			pp->io.end = min_t(resource_size_t,
-					   IO_SPACE_LIMIT,
-					   range.pci_addr + range.size
-					   + global_io_offset - 1);
-			pp->io_size = resource_size(&pp->io);
-			pp->io_bus_addr = range.pci_addr;
-			pp->io_base = range.cpu_addr;
-
-			/* Find the untranslated IO space address */
-			pp->io_mod_base = range.cpu_addr;
-		}
-		if (restype == IORESOURCE_MEM) {
-			of_pci_range_to_resource(&range, np, &pp->mem);
-			pp->mem.name = "MEM";
-			pp->mem_size = resource_size(&pp->mem);
-			pp->mem_bus_addr = range.pci_addr;
-
-			/* Find the untranslated MEM space address */
-			pp->mem_mod_base = range.cpu_addr;
-		}
-		if (restype == 0) {
-			of_pci_range_to_resource(&range, np, &pp->cfg);
-			pp->cfg0_size = resource_size(&pp->cfg)/2;
-			pp->cfg1_size = resource_size(&pp->cfg)/2;
-			pp->cfg0_base = pp->cfg.start;
-			pp->cfg1_base = pp->cfg.start + pp->cfg0_size;
-
-			/* Find the untranslated configuration space address */
-			pp->cfg0_mod_base = range.cpu_addr;
-			pp->cfg1_mod_base = pp->cfg0_mod_base +
-					    pp->cfg0_size;
+	resource_list_for_each_entry(win, &res) {
+		switch (resource_type(win->res)) {
+		case IORESOURCE_IO:
+			pp->io = win->res;
+			pp->io->name = "I/O";
+			pp->io_size = resource_size(pp->io);
+			pp->io_bus_addr = pp->io->start - win->offset;
+			ret = pci_remap_iospace(pp->io, pp->io_base);
+			if (ret) {
+				dev_warn(pp->dev, "error %d: failed to map resource %pR\n",
+					 ret, pp->io);
+				continue;
+			}
+			break;
+		case IORESOURCE_MEM:
+			pp->mem = win->res;
+			pp->mem->name = "MEM";
+			pp->mem_size = resource_size(pp->mem);
+			pp->mem_bus_addr = pp->mem->start - win->offset;
+			break;
+		case 0:
+			pp->cfg = win->res;
+			pp->cfg0_size = resource_size(pp->cfg)/2;
+			pp->cfg1_size = resource_size(pp->cfg)/2;
+			pp->cfg0_base = pp->cfg->start;
+			pp->cfg1_base = pp->cfg->start + pp->cfg0_size;
+			break;
+		case IORESOURCE_BUS:
+			pp->busn = win->res;
+			break;
+		default:
+			continue;
 		}
 	}
 
-	ret = of_pci_parse_bus_range(np, &pp->busn);
-	if (ret < 0) {
-		pp->busn.name = np->name;
-		pp->busn.start = 0;
-		pp->busn.end = 0xff;
-		pp->busn.flags = IORESOURCE_BUS;
-		dev_dbg(pp->dev, "failed to parse bus-range property: %d, using default %pR\n",
-			ret, &pp->busn);
-	}
-
 	if (!pp->dbi_base) {
-		pp->dbi_base = devm_ioremap(pp->dev, pp->cfg.start,
-					resource_size(&pp->cfg));
+		pp->dbi_base = devm_ioremap(pp->dev, pp->cfg->start,
+					resource_size(pp->cfg));
 		if (!pp->dbi_base) {
 			dev_err(pp->dev, "error with ioremap\n");
 			return -ENOMEM;
 		}
 	}
 
-	pp->mem_base = pp->mem.start;
+	pp->mem_base = pp->mem->start;
 
 	if (!pp->va_cfg0_base) {
 		pp->va_cfg0_base = devm_ioremap(pp->dev, pp->cfg0_base,
@@ -504,7 +469,7 @@ int dw_pcie_host_init(struct pcie_port *pp)
 
 	if (!pp->ops->rd_other_conf)
 		dw_pcie_prog_outbound_atu(pp, PCIE_ATU_REGION_INDEX1,
-					  PCIE_ATU_TYPE_MEM, pp->mem_mod_base,
+					  PCIE_ATU_TYPE_MEM, pp->mem_base,
 					  pp->mem_bus_addr, pp->mem_size);
 
 	dw_pcie_wr_own_conf(pp, PCI_BASE_ADDRESS_0, 4, 0);
@@ -516,14 +481,28 @@ int dw_pcie_host_init(struct pcie_port *pp)
 	val |= PORT_LOGIC_SPEED_CHANGE;
 	dw_pcie_wr_own_conf(pp, PCIE_LINK_WIDTH_SPEED_CONTROL, 4, val);
 
-#ifdef CONFIG_PCI_MSI
-	dw_pcie_msi_chip.dev = pp->dev;
-#endif
+	pp->root_bus_nr = pp->busn->start;
+	if (IS_ENABLED(CONFIG_PCI_MSI)) {
+		bus = pci_scan_root_bus_msi(pp->dev, pp->root_bus_nr,
+					    &dw_pcie_ops, pp, &res,
+					    &dw_pcie_msi_chip);
+		dw_pcie_msi_chip.dev = pp->dev;
+	} else
+		bus = pci_scan_root_bus(pp->dev, pp->root_bus_nr, &dw_pcie_ops,
+					pp, &res);
+	if (!bus)
+		return -ENOMEM;
 
-	dw_pci.nr_controllers = 1;
-	dw_pci.private_data = (void **)&pp;
+	if (pp->ops->scan_bus)
+		pp->ops->scan_bus(pp);
 
-	pci_common_init_dev(pp->dev, &dw_pci);
+#ifdef CONFIG_ARM
+	/* support old dtbs that incorrectly describe IRQs */
+	pci_fixup_irqs(pci_common_swizzle, of_irq_parse_and_map_pci);
+#endif
+
+	pci_assign_unassigned_bus_resources(bus);
+	pci_bus_add_devices(bus);
 
 	return 0;
 }
@@ -542,12 +521,12 @@ static int dw_pcie_rd_other_conf(struct pcie_port *pp, struct pci_bus *bus,
 
 	if (bus->parent->number == pp->root_bus_nr) {
 		type = PCIE_ATU_TYPE_CFG0;
-		cpu_addr = pp->cfg0_mod_base;
+		cpu_addr = pp->cfg0_base;
 		cfg_size = pp->cfg0_size;
 		va_cfg_base = pp->va_cfg0_base;
 	} else {
 		type = PCIE_ATU_TYPE_CFG1;
-		cpu_addr = pp->cfg1_mod_base;
+		cpu_addr = pp->cfg1_base;
 		cfg_size = pp->cfg1_size;
 		va_cfg_base = pp->va_cfg1_base;
 	}
@@ -557,7 +536,7 @@ static int dw_pcie_rd_other_conf(struct pcie_port *pp, struct pci_bus *bus,
 				  busdev, cfg_size);
 	ret = dw_pcie_cfg_read(va_cfg_base + address, where, size, val);
 	dw_pcie_prog_outbound_atu(pp, PCIE_ATU_REGION_INDEX0,
-				  PCIE_ATU_TYPE_IO, pp->io_mod_base,
+				  PCIE_ATU_TYPE_IO, pp->io_base,
 				  pp->io_bus_addr, pp->io_size);
 
 	return ret;
@@ -577,12 +556,12 @@ static int dw_pcie_wr_other_conf(struct pcie_port *pp, struct pci_bus *bus,
 
 	if (bus->parent->number == pp->root_bus_nr) {
 		type = PCIE_ATU_TYPE_CFG0;
-		cpu_addr = pp->cfg0_mod_base;
+		cpu_addr = pp->cfg0_base;
 		cfg_size = pp->cfg0_size;
 		va_cfg_base = pp->va_cfg0_base;
 	} else {
 		type = PCIE_ATU_TYPE_CFG1;
-		cpu_addr = pp->cfg1_mod_base;
+		cpu_addr = pp->cfg1_base;
 		cfg_size = pp->cfg1_size;
 		va_cfg_base = pp->va_cfg1_base;
 	}
@@ -592,7 +571,7 @@ static int dw_pcie_wr_other_conf(struct pcie_port *pp, struct pci_bus *bus,
 				  busdev, cfg_size);
 	ret = dw_pcie_cfg_write(va_cfg_base + address, where, size, val);
 	dw_pcie_prog_outbound_atu(pp, PCIE_ATU_REGION_INDEX0,
-				  PCIE_ATU_TYPE_IO, pp->io_mod_base,
+				  PCIE_ATU_TYPE_IO, pp->io_base,
 				  pp->io_bus_addr, pp->io_size);
 
 	return ret;
@@ -624,7 +603,7 @@ static int dw_pcie_valid_config(struct pcie_port *pp,
 static int dw_pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
 			int size, u32 *val)
 {
-	struct pcie_port *pp = sys_to_pcie(bus->sysdata);
+	struct pcie_port *pp = bus->sysdata;
 	int ret;
 
 	if (dw_pcie_valid_config(pp, bus, PCI_SLOT(devfn)) == 0) {
@@ -648,7 +627,7 @@ static int dw_pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
 static int dw_pcie_wr_conf(struct pci_bus *bus, u32 devfn,
 			int where, int size, u32 val)
 {
-	struct pcie_port *pp = sys_to_pcie(bus->sysdata);
+	struct pcie_port *pp = bus->sysdata;
 	int ret;
 
 	if (dw_pcie_valid_config(pp, bus, PCI_SLOT(devfn)) == 0)
@@ -672,69 +651,6 @@ static struct pci_ops dw_pcie_ops = {
 	.write = dw_pcie_wr_conf,
 };
 
-static int dw_pcie_setup(int nr, struct pci_sys_data *sys)
-{
-	struct pcie_port *pp;
-
-	pp = sys_to_pcie(sys);
-
-	if (global_io_offset < SZ_1M && pp->io_size > 0) {
-		sys->io_offset = global_io_offset - pp->io_bus_addr;
-		pci_ioremap_io(global_io_offset, pp->io_base);
-		global_io_offset += SZ_64K;
-		pci_add_resource_offset(&sys->resources, &pp->io,
-					sys->io_offset);
-	}
-
-	sys->mem_offset = pp->mem.start - pp->mem_bus_addr;
-	pci_add_resource_offset(&sys->resources, &pp->mem, sys->mem_offset);
-	pci_add_resource(&sys->resources, &pp->busn);
-
-	return 1;
-}
-
-static struct pci_bus *dw_pcie_scan_bus(int nr, struct pci_sys_data *sys)
-{
-	struct pci_bus *bus;
-	struct pcie_port *pp = sys_to_pcie(sys);
-
-	pp->root_bus_nr = sys->busnr;
-
-	if (IS_ENABLED(CONFIG_PCI_MSI))
-		bus = pci_scan_root_bus_msi(pp->dev, sys->busnr, &dw_pcie_ops,
-					    sys, &sys->resources,
-					    &dw_pcie_msi_chip);
-	else
-		bus = pci_scan_root_bus(pp->dev, sys->busnr, &dw_pcie_ops,
-					sys, &sys->resources);
-
-	if (!bus)
-		return NULL;
-
-	if (bus && pp->ops->scan_bus)
-		pp->ops->scan_bus(pp);
-
-	return bus;
-}
-
-static int dw_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	struct pcie_port *pp = sys_to_pcie(dev->bus->sysdata);
-	int irq;
-
-	irq = of_irq_parse_and_map_pci(dev, slot, pin);
-	if (!irq)
-		irq = pp->irq;
-
-	return irq;
-}
-
-static struct hw_pci dw_pci = {
-	.setup		= dw_pcie_setup,
-	.scan		= dw_pcie_scan_bus,
-	.map_irq	= dw_pcie_map_irq,
-};
-
 void dw_pcie_setup_rc(struct pcie_port *pp)
 {
 	u32 val;
drivers/pci/host/pcie-designware.h +5 -9
index d0bbd27..264c969 100644
@@ -27,25 +27,21 @@ struct pcie_port {
 	u8			root_bus_nr;
 	void __iomem		*dbi_base;
 	u64			cfg0_base;
-	u64			cfg0_mod_base;
 	void __iomem		*va_cfg0_base;
 	u32			cfg0_size;
 	u64			cfg1_base;
-	u64			cfg1_mod_base;
 	void __iomem		*va_cfg1_base;
 	u32			cfg1_size;
-	u64			io_base;
-	u64			io_mod_base;
+	resource_size_t		io_base;
 	phys_addr_t		io_bus_addr;
 	u32			io_size;
 	u64			mem_base;
-	u64			mem_mod_base;
 	phys_addr_t		mem_bus_addr;
 	u32			mem_size;
-	struct resource		cfg;
-	struct resource		io;
-	struct resource		mem;
-	struct resource		busn;
+	struct resource		*cfg;
+	struct resource		*io;
+	struct resource		*mem;
+	struct resource		*busn;
 	int			irq;
 	u32			lanes;
 	struct pcie_host_ops	*ops;
#5 lore raw

PATCH v9 3/6 PCI: designware: Add ARM64 support

Hi Zhou,

Quoted 16 lines · Zhou Wang
Quoted 15 lines · Zhou Wang

This patch tries to unify ARM32 and ARM64 PCIe in designware driver. Delete function dw_pcie_setup, dw_pcie_scan_bus, dw_pcie_map_irq and struct hw_pci, move related operations to dw_pcie_host_init.

This patch also try to use of_pci_get_host_bridge_resources for ARM32 and ARM64 according to the suggestion for Gabriele[1]

This patch reverts commit f4c55c5a3f7f ("PCI: designware: Program ATU with untranslated address") based on 1/6 in this series. we delete *_mod_base in pcie-designware. This was discussed in [2]

I have compiled the driver with multi_v7_defconfig. However, I don't have ARM32 PCIe related board to do test. It will be appreciated if someone could help to test it.

Quoted 6 lines
Quoted 6 lines

Sorry for delayed response. Since I moved from ST, I do not have any test board having designware PCIe controller :(, and also I do designware work only in my hobby time, so it took time to understand few modifications. Anyway, all modifications looks fine to me. So,

PS: Does someone know about a economical test board from any vendor with designware PCIe IP?

author
#6 lore raw

PATCH v9 3/6 PCI: designware: Add ARM64 support

Quoted 26 lines · Pratyush Anand

Hi Zhou,

Quoted 16 lines · Zhou Wang
Quoted 15 lines · Zhou Wang

This patch tries to unify ARM32 and ARM64 PCIe in designware driver. Delete function dw_pcie_setup, dw_pcie_scan_bus, dw_pcie_map_irq and struct hw_pci, move related operations to dw_pcie_host_init.

This patch also try to use of_pci_get_host_bridge_resources for ARM32 and ARM64 according to the suggestion for Gabriele[1]

This patch reverts commit f4c55c5a3f7f ("PCI: designware: Program ATU with untranslated address") based on 1/6 in this series. we delete *_mod_base in pcie-designware. This was discussed in [2]

I have compiled the driver with multi_v7_defconfig. However, I don't have ARM32 PCIe related board to do test. It will be appreciated if someone could help to test it.

Quoted 6 lines
Quoted 6 lines
Quoted 6 lines

Sorry for delayed response. Since I moved from ST, I do not have any test board having designware PCIe controller :(, and also I do designware work only in my hobby time, so it took time to understand few modifications. Anyway, all modifications looks fine to me. So,

Hi Pratyush,

Many thanks for your reviewing :)

Best Regards,
Zhou

Quoted 10 lines

PS: Does someone know about a economical test board from any vendor with designware PCIe IP?
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html

.

author
#7 lore raw

PATCH v9 4/6 PCI: hisi: Add PCIe host support for HiSilicon SoC Hip05

In reply to Zhou Wang

This patch adds PCIe host support for HiSilicon SoC Hip05.

---
 drivers/pci/host/Kconfig     |   8 ++
 drivers/pci/host/Makefile    |   1 +
 drivers/pci/host/pcie-hisi.c | 310 +++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 319 insertions(+)
 create mode 100644 drivers/pci/host/pcie-hisi.c
drivers/pci/host/Kconfig +8 -0
index d5e58ba..ae873be 100644
@@ -145,4 +145,12 @@ config PCIE_IPROC_BCMA
 	  Say Y here if you want to use the Broadcom iProc PCIe controller
 	  through the BCMA bus interface
 
+config PCI_HISI
+	depends on OF && ARM64
+	bool "HiSilicon SoC HIP05 PCIe controller"
+	select PCIEPORTBUS
+	select PCIE_DW
+	help
+	  Say Y here if you want PCIe controller support on HiSilicon HIP05 SoC
+
 endmenu
drivers/pci/host/Makefile +1 -0
index 140d66f..ea1dbf2 100644
@@ -17,3 +17,4 @@ obj-$(CONFIG_PCI_VERSATILE) += pci-versatile.o
 obj-$(CONFIG_PCIE_IPROC) += pcie-iproc.o
 obj-$(CONFIG_PCIE_IPROC_PLATFORM) += pcie-iproc-platform.o
 obj-$(CONFIG_PCIE_IPROC_BCMA) += pcie-iproc-bcma.o
+obj-$(CONFIG_PCI_HISI) += pcie-hisi.o
drivers/pci/host/pcie-hisi.c new file +310 -0

310 lines not on this page · raw message

Signature · 1 line
1.9.1
author
#8 lore raw

PATCH v9 5/6 Documentation: DT: Add HiSilicon PCIe host binding

In reply to Zhou Wang

This patch adds related DTS binding document for HiSilicon PCIe host driver.

---
 .../devicetree/bindings/pci/hisilicon-pcie.txt     | 46 ++++++++++++++++++++++
 1 file changed, 46 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
Documentation/devicetree/bindings/pci/hisilicon-pcie.txt new file +46 -0
new file mode 100644
index 0000000..2afc9d1
@@ -0,0 +1,46 @@
+HiSilicon PCIe host bridge DT description
+
+HiSilicon PCIe host controller is based on Designware PCI core.
+It shares common functions with PCIe Designware core driver and inherits
+common properties defined in
+Documentation/devicetree/bindings/pci/designware-pci.txt.
+
+Additional properties are described here:
+
+Required properties:
+- compatible: Should contain "hisilicon,hip05-pcie".
+- reg: Should contain rc_dbi, subctrl, config registers location and length.
+- reg-names: Must include the following entries:
+  "rc_dbi": controller configuration registers;
+  "subctrl": whole PCIe hosts configuration registers;
+  "config": PCIe configuration space registers.
+- msi-parent: Should be its_pcie which is an ITS receiving MSI interrupts.
+- port-id: Should be 0, 1, 2 or 3.
+
+Optional properties:
+- status: Either "ok" or "disabled".
+- dma-coherent: Present if DMA operations are coherent.
+
+Example:
+	pcie@0xb0080000 {
+		compatible = "hisilicon,hip05-pcie", "snps,dw-pcie";
+		reg = <0 0xb0080000 0 0x10000>, <0 0xb0000000 0 0x10000>,
+		      <0x220 0x00000000 0 0x2000>;
+		reg-names = "rc_dbi", "subctrl", "config";
+		bus-range = <0  15>;
+		msi-parent = <&its_pcie>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+		dma-coherent;
+		ranges = <0x82000000 0 0x00000000 0x220 0x00000000 0 0x10000000>;
+		num-lanes = <8>;
+		port-id = <1>;
+		#interrupts-cells = <1>;
+		interrupts-map-mask = <0xf800 0 0 7>;
+		interrupts-map = <0x0 0 0 1 &mbigen_pcie 1 10
+				  0x0 0 0 2 &mbigen_pcie 2 11
+				  0x0 0 0 3 &mbigen_pcie 3 12
+				  0x0 0 0 4 &mbigen_pcie 4 13>;
+		status = "ok";
+	};
Signature · 1 line
1.9.1
maintainer
#9 lore raw

PATCH v9 5/6 Documentation: DT: Add HiSilicon PCIe host binding

Quoted 22 lines · Zhou Wang

This patch adds related DTS binding document for HiSilicon PCIe host driver.

---
 .../devicetree/bindings/pci/hisilicon-pcie.txt     | 46 ++++++++++++++++++++++
 1 file changed, 46 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
Documentation/devicetree/bindings/pci/hisilicon-pcie.txt new file +8 -0
new file mode 100644
index 0000000..2afc9d1
@@ -0,0 +1,46 @@
+HiSilicon PCIe host bridge DT description
+
+HiSilicon PCIe host controller is based on Designware PCI core.
+It shares common functions with PCIe Designware core driver and inherits
+common properties defined in
+Documentation/devicetree/bindings/pci/designware-pci.txt.
+
+Additional properties are described here:

Documentation/devicetree/bindings/pci/hisilicon-pcie.txt line 18

Quoted 10 lines
Documentation/devicetree/bindings/pci/hisilicon-pcie.txt new file +10 -0
+
+Required properties:
+- compatible: Should contain "hisilicon,hip05-pcie".
+- reg: Should contain rc_dbi, subctrl, config registers location and length.
+- reg-names: Must include the following entries:
+  "rc_dbi": controller configuration registers;
+  "subctrl": whole PCIe hosts configuration registers;
+  "config": PCIe configuration space registers.
+- msi-parent: Should be its_pcie which is an ITS receiving MSI interrupts.
+- port-id: Should be 0, 1, 2 or 3.

What is port-id for? Use of instance indexes need to have good reason.

Rob

author
#10 lore raw

PATCH v9 5/6 Documentation: DT: Add HiSilicon PCIe host binding

Quoted 36 lines · Rob Herring
Quoted 22 lines · Zhou Wang

This patch adds related DTS binding document for HiSilicon PCIe host driver.

---
 .../devicetree/bindings/pci/hisilicon-pcie.txt     | 46 ++++++++++++++++++++++
 1 file changed, 46 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
Documentation/devicetree/bindings/pci/hisilicon-pcie.txt new file +8 -0
new file mode 100644
index 0000000..2afc9d1
@@ -0,0 +1,46 @@
+HiSilicon PCIe host bridge DT description
+
+HiSilicon PCIe host controller is based on Designware PCI core.
+It shares common functions with PCIe Designware core driver and inherits
+common properties defined in
+Documentation/devicetree/bindings/pci/designware-pci.txt.
+
+Additional properties are described here:

Documentation/devicetree/bindings/pci/hisilicon-pcie.txt line 18

Quoted 10 lines
Documentation/devicetree/bindings/pci/hisilicon-pcie.txt new file +10 -0
+
+Required properties:
+- compatible: Should contain "hisilicon,hip05-pcie".
+- reg: Should contain rc_dbi, subctrl, config registers location and length.
+- reg-names: Must include the following entries:
+  "rc_dbi": controller configuration registers;
+  "subctrl": whole PCIe hosts configuration registers;
+  "config": PCIe configuration space registers.
+- msi-parent: Should be its_pcie which is an ITS receiving MSI interrupts.
+- port-id: Should be 0, 1, 2 or 3.

What is port-id for? Use of instance indexes need to have good reason.

Quoted 1 line

Rob

There are four PCIe controllers in HiSilicon Hip05 SoC, port-id just indicates which one we use. And we will use port-id to locate related registers in driver.

Thanks,
Zhou

Quoted 4 lines

.

maintainer
#11 lore raw

PATCH v9 5/6 Documentation: DT: Add HiSilicon PCIe host binding

Quoted 37 lines · Zhou Wang
Quoted 36 lines · Rob Herring
Quoted 22 lines · Zhou Wang

This patch adds related DTS binding document for HiSilicon PCIe host driver.

---
 .../devicetree/bindings/pci/hisilicon-pcie.txt     | 46 ++++++++++++++++++++++
 1 file changed, 46 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
Documentation/devicetree/bindings/pci/hisilicon-pcie.txt new file +8 -0
new file mode 100644
index 0000000..2afc9d1
@@ -0,0 +1,46 @@
+HiSilicon PCIe host bridge DT description
+
+HiSilicon PCIe host controller is based on Designware PCI core.
+It shares common functions with PCIe Designware core driver and inherits
+common properties defined in
+Documentation/devicetree/bindings/pci/designware-pci.txt.
+
+Additional properties are described here:

Documentation/devicetree/bindings/pci/hisilicon-pcie.txt line 18

Quoted 10 lines
Documentation/devicetree/bindings/pci/hisilicon-pcie.txt new file +10 -0
+
+Required properties:
+- compatible: Should contain "hisilicon,hip05-pcie".
+- reg: Should contain rc_dbi, subctrl, config registers location and length.
+- reg-names: Must include the following entries:
+  "rc_dbi": controller configuration registers;
+  "subctrl": whole PCIe hosts configuration registers;
+  "config": PCIe configuration space registers.
+- msi-parent: Should be its_pcie which is an ITS receiving MSI interrupts.
+- port-id: Should be 0, 1, 2 or 3.

What is port-id for? Use of instance indexes need to have good reason.

Quoted 4 lines
Quoted 1 line

Rob

There are four PCIe controllers in HiSilicon Hip05 SoC, port-id just indicates which one we use. And we will use port-id to locate related registers in driver.

Just having multiple instances is not a reason. So looking at the driver, port-id is used to calculate register addresses for these registers:

#define PCIE_SUBCTRL_MODE_REG 0x2800
#define PCIE_SUBCTRL_SYS_STATE4_REG 0x6818

Is the base address of subctrl the same on all 4 ports? If so, you should not have overlapping resources in the DT. Either split these 2 registers into 2 reg regions (for each register) or use syscon to provide access to the region.

Rob

author
#12 lore raw

PATCH v9 5/6 Documentation: DT: Add HiSilicon PCIe host binding

Quoted 43 lines · Rob Herring
Quoted 37 lines · Zhou Wang
Quoted 36 lines · Rob Herring
Quoted 22 lines · Zhou Wang

This patch adds related DTS binding document for HiSilicon PCIe host driver.

---
 .../devicetree/bindings/pci/hisilicon-pcie.txt     | 46 ++++++++++++++++++++++
 1 file changed, 46 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
Documentation/devicetree/bindings/pci/hisilicon-pcie.txt new file +8 -0
new file mode 100644
index 0000000..2afc9d1
@@ -0,0 +1,46 @@
+HiSilicon PCIe host bridge DT description
+
+HiSilicon PCIe host controller is based on Designware PCI core.
+It shares common functions with PCIe Designware core driver and inherits
+common properties defined in
+Documentation/devicetree/bindings/pci/designware-pci.txt.
+
+Additional properties are described here:

Documentation/devicetree/bindings/pci/hisilicon-pcie.txt line 18

Quoted 10 lines
Documentation/devicetree/bindings/pci/hisilicon-pcie.txt new file +10 -0
+
+Required properties:
+- compatible: Should contain "hisilicon,hip05-pcie".
+- reg: Should contain rc_dbi, subctrl, config registers location and length.
+- reg-names: Must include the following entries:
+  "rc_dbi": controller configuration registers;
+  "subctrl": whole PCIe hosts configuration registers;
+  "config": PCIe configuration space registers.
+- msi-parent: Should be its_pcie which is an ITS receiving MSI interrupts.
+- port-id: Should be 0, 1, 2 or 3.

What is port-id for? Use of instance indexes need to have good reason.

Quoted 4 lines
Quoted 1 line

Rob

There are four PCIe controllers in HiSilicon Hip05 SoC, port-id just indicates which one we use. And we will use port-id to locate related registers in driver.

Quoted 7 lines

Just having multiple instances is not a reason. So looking at the driver, port-id is used to calculate register addresses for these registers:

#define PCIE_SUBCTRL_MODE_REG 0x2800
#define PCIE_SUBCTRL_SYS_STATE4_REG 0x6818

Is the base address of subctrl the same on all 4 ports? If so, you

Yes, same subctrl address for 4 ports. Will use syscon to access subctrl registers in next version.

Many thanks for pointing this,
Zhou

Quoted 9 lines

should not have overlapping resources in the DT. Either split these 2 registers into 2 reg regions (for each register) or use syscon to provide access to the region.

Rob

.

author
#13 lore raw

PATCH v9 6/6 MAINTAINERS: Add pcie-hisi maintainer

In reply to Zhou Wang
---
 MAINTAINERS | 7 +++++++
 1 file changed, 7 insertions(+)
MAINTAINERS +7 -0
index 7ba7ab7..944a229 100644
@@ -8047,6 +8047,13 @@ S:	Maintained
 F:	Documentation/devicetree/bindings/pci/xgene-pci-msi.txt
 F:	drivers/pci/host/pci-xgene-msi.c
 
+PCIE DRIVER FOR HISILICON
+M:	Zhou Wang <[email protected]>
+L:	[email protected]
+S:	Maintained
+F:	Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
+F:	drivers/pci/host/pcie-hisi.c
+
 PCMCIA SUBSYSTEM
 P:	Linux PCMCIA Team
 L:	[email protected]
Signature · 1 line
1.9.1