ARM: at91: sama5: add support for CONFIG_ENV_IS_IN_MMC
PATCH 1/1 ARM: at91: sama5: add support for CONFIG_ENV_IS_IN_MMC
If defined CONFIG_ENV_IS_IN_MMC, then u-boot environment is saved in mmc's raw sectors. Otherwise, u-boot environment is saved as a file:
uboot.env.
Signed-off-by Josh Wu <[email protected]>
---
include/configs/at91-sama5_common.h | 8 ++++++++ 1 file changed, 8 insertions(+)
include/configs/at91-sama5_common.h +8 -0
@@ -53,6 +53,13 @@#define CONFIG_CMD_DHCP #ifdef CONFIG_SYS_USE_MMC + +#ifdef CONFIG_ENV_IS_IN_MMC +/* Use raw reserved sectors to save environment */ +#define CONFIG_ENV_OFFSET 0x2000 +#define CONFIG_ENV_SIZE 0x1000 +#define CONFIG_SYS_MMC_ENV_DEV 0 +#else /* u-boot env in sd/mmc card */ #define CONFIG_ENV_IS_IN_FAT #define CONFIG_FAT_WRITE
@@ -60,6 +67,7 @@#define FAT_ENV_DEVICE_AND_PART "0"#define FAT_ENV_FILE "uboot.env"#define CONFIG_ENV_SIZE 0x4000 +#endif #define CONFIG_BOOTCOMMAND "if test ! -n ${dtb_name}; then " \ "setenv dtb_name at91-${board_name}.dtb; " \
Signature · 1 line
1.9.1
PATCH 1/1 ARM: at91: sama5: add support for CONFIG_ENV_IS_IN_MMC
Hi Josh
Quoted 5 lines · Josh Wu
If defined
CONFIG_ENV_IS_IN_MMC, then u-boot environment is saved in mmc's raw sectors. Otherwise, u-boot environment is saved as a file:
uboot.env.Signed-off-by Josh Wu <[email protected]>
Reviewed-by Bo Shen <[email protected]>
Best Regards,
Bo Shen
Dear Josh Wu,
Quoted 10 lines · Josh Wu
If defined
CONFIG_ENV_IS_IN_MMC, then u-boot environment is saved in mmc's raw sectors. Otherwise, u-boot environment is saved as a file:
uboot.env.Signed-off-by Josh Wu <[email protected]>Reviewed-by Bo Shen <[email protected]>---
include/configs/at91-sama5_common.h| 8 ++++++++1 file changed, 8 insertions(+)
applied to u-boot-atmel/master, thanks!
Best regards,
Andreas Bie?mann