arm64: dts: mt8192: add thermal zones, cooling map and trips
Subsystems (2)
PATCH 1/1 arm64: dts: mt8192: add thermal zones, cooling map and trips
Add thermal zone node to support mt8192 read temperature. Thermal throttle will start at 68C and the target temperature is 85C.
This patch depends on [1].
[1]https://patchwork.kernel.org/project/linux-mediatek/patch/[email protected]/
--- arch/arm64/boot/dts/mediatek/mt8192.dtsi | 169 +++++++++++++++++++++++ 1 file changed, 169 insertions(+)
arch/arm64/boot/dts/mediatek/mt8192.dtsi +169 -0
@@ -9,6 +9,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/pinctrl/mt8192-pinfunc.h> +#include <dt-bindings/thermal/thermal.h> / { compatible = "mediatek,mt8192";
@@ -42,6 +43,7 @@ clock-frequency = <1701000000>; next-level-cache = <&l2_0>; capacity-dmips-mhz = <530>; + #cooling-cells = <2>; }; cpu1: cpu@100 {
@@ -52,6 +54,7 @@ clock-frequency = <1701000000>; next-level-cache = <&l2_0>; capacity-dmips-mhz = <530>; + #cooling-cells = <2>; }; cpu2: cpu@200 {
@@ -62,6 +65,7 @@ clock-frequency = <1701000000>; next-level-cache = <&l2_0>; capacity-dmips-mhz = <530>; + #cooling-cells = <2>; }; cpu3: cpu@300 {
@@ -72,6 +76,7 @@ clock-frequency = <1701000000>; next-level-cache = <&l2_0>; capacity-dmips-mhz = <530>; + #cooling-cells = <2>; }; cpu4: cpu@400 {
@@ -82,6 +87,7 @@ clock-frequency = <2171000000>; next-level-cache = <&l2_1>; capacity-dmips-mhz = <1024>; + #cooling-cells = <2>; }; cpu5: cpu@500 {
@@ -92,6 +98,7 @@ clock-frequency = <2171000000>; next-level-cache = <&l2_1>; capacity-dmips-mhz = <1024>; + #cooling-cells = <2>; }; cpu6: cpu@600 {
@@ -102,6 +109,7 @@ clock-frequency = <2171000000>; next-level-cache = <&l2_1>; capacity-dmips-mhz = <1024>; + #cooling-cells = <2>; }; cpu7: cpu@700 {
@@ -112,6 +120,7 @@ clock-frequency = <2171000000>; next-level-cache = <&l2_1>; capacity-dmips-mhz = <1024>; + #cooling-cells = <2>; }; cpu-map {
@@ -178,6 +187,140 @@ method = "smc"; }; + thermal-zones { + soc_max { + polling-delay = <1000>; /* milliseconds */ + polling-delay-passive = <1000>; /* milliseconds */ + thermal-sensors = <&lvts 0>; + sustainable-power = <1500>; + + trips { + threshold: trip-point@0 { + temperature = <68000>; + hysteresis = <2000>; + type = "passive"; + }; + + target: target@1 { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + soc_max_crit: soc_max_crit@0 { + temperature = <115000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&target>; + cooling-device = <&cpu0 + THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>, + <&cpu1 + THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>, + <&cpu2 + THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>, + <&cpu3 + THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + contribution = <3072>; + }; + map1 { + trip = <&target>; + cooling-device = <&cpu4 + THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>, + <&cpu5 + THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>, + <&cpu6 + THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>, + <&cpu7 + THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + contribution = <1024>; + }; + }; + }; + cpu_big1 { + polling-delay = <0>; /* milliseconds */ + polling-delay-passive = <0>; /* milliseconds */ + thermal-sensors = <&lvts 1>; + }; + cpu_big2 { + polling-delay = <0>; /* milliseconds */ + polling-delay-passive = <0>; /* milliseconds */ + thermal-sensors = <&lvts 2>; + }; + cpu_big3 { + polling-delay = <0>; /* milliseconds */ + polling-delay-passive = <0>; /* milliseconds */ + thermal-sensors = <&lvts 3>; + }; + cpu_big4 { + polling-delay = <0>; /* milliseconds */ + polling-delay-passive = <0>; /* milliseconds */ + thermal-sensors = <&lvts 4>; + }; + cci1 { + polling-delay = <0>; /* milliseconds */ + polling-delay-passive = <0>; /* milliseconds */ + thermal-sensors = <&lvts 5>; + }; + cci2 { + polling-delay = <0>; /* milliseconds */ + polling-delay-passive = <0>; /* milliseconds */ + thermal-sensors = <&lvts 6>; + }; + cpu_little1 { + polling-delay = <0>; /* milliseconds */ + polling-delay-passive = <0>; /* milliseconds */ + thermal-sensors = <&lvts 7>; + }; + cpu_little2 { + polling-delay = <0>; /* milliseconds */ + polling-delay-passive = <0>; /* milliseconds */ + thermal-sensors = <&lvts 8>; + }; + apu { + polling-delay = <0>; /* milliseconds */ + polling-delay-passive = <0>; /* milliseconds */ + thermal-sensors = <&lvts 9>; + }; + mlda { + polling-delay = <0>; /* milliseconds */ + polling-delay-passive = <0>; /* milliseconds */ + thermal-sensors = <&lvts 10>; + }; + gpu1 { + polling-delay = <0>; /* milliseconds */ + polling-delay-passive = <0>; /* milliseconds */ + thermal-sensors = <&lvts 11>; + }; + gpu2 { + polling-delay = <0>; /* milliseconds */ + polling-delay-passive = <0>; /* milliseconds */ + thermal-sensors = <&lvts 12>; + }; + infra { + polling-delay = <0>; /* milliseconds */ + polling-delay-passive = <0>; /* milliseconds */ + thermal-sensors = <&lvts 13>; + }; + camsys { + polling-delay = <0>; /* milliseconds */ + polling-delay-passive = <0>; /* milliseconds */ + thermal-sensors = <&lvts 14>; + }; + }; + timer: timer { compatible = "arm,armv8-timer"; interrupt-parent = <&gic>;
@@ -224,6 +367,10 @@ compatible = "mediatek,mt8192-infracfg", "syscon"; reg = <0 0x10001000 0 0x1000>; #clock-cells = <1>; + ti,reset-bits = < + 0x120 0 0x124 0 0 0 (ASSERT_SET | DEASSERT_SET | STATUS_NONE) + 0x730 12 0x734 12 0 0 (ASSERT_SET | DEASSERT_SET | STATUS_NONE) + >; }; pericfg: syscon@10003000 {
@@ -318,6 +465,24 @@ status = "disabled"; }; + lvts: lvts@1100b000 { + compatible = "mediatek,mt6873-lvts"; + #thermal-sensor-cells = <1>; + reg = <0 0x1100b000 0 0x1000>, + <0 0x11278000 0 0x1000>; + interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH 0>; + + clocks = <&infracfg CLK_INFRA_THERM>; + clock-names = "lvts_clk"; + + resets = <&infracfg_rst 0>, + <&infracfg_rst 1>; + + nvmem-cells = <&lvts_e_data1>; + nvmem-cell-names = "e_data1"; + }; + spi1: spi@11010000 { compatible = "mediatek,mt8192-spi", "mediatek,mt6765-spi";
@@ -425,6 +590,10 @@ efuse: efuse@11c10000 { compatible = "mediatek,mt8192-efuse", "mediatek,efuse"; + + lvts_e_data1: data1 { + reg = <0x1C0 0x58>; + }; }; i2c3: i2c3@11cb0000 {
Signature · 1 line
2.18.0
Matthias Brugger
maintainerQuoted 5 lines · Michael Kao
Add thermal zone node to support mt8192 read temperature. Thermal throttle will start at 68C and the target temperature is 85C.
This patch depends on [1].
Please provide this kind of information below the three dashes '---'. Otherwise this will end up in the commit message.
Quoted 93 lines
[1]https://patchwork.kernel.org/project/linux-mediatek/patch/[email protected]/
Signed-off-by Michael Kao <[email protected]>--- arch/arm64/boot/dts/mediatek/mt8192.dtsi | 169 +++++++++++++++++++++++ 1 file changed, 169 insertions(+)arch/arm64/boot/dts/mediatek/mt8192.dtsi +14
-0@@ -9,6 +9,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/pinctrl/mt8192-pinfunc.h> +#include <dt-bindings/thermal/thermal.h> / { compatible = "mediatek,mt8192";@@ -42,6 +43,7 @@ clock-frequency = <1701000000>; next-level-cache = <&l2_0>; capacity-dmips-mhz = <530>; + #cooling-cells = <2>; }; cpu1: cpu@100 {@@ -52,6 +54,7 @@ clock-frequency = <1701000000>; next-level-cache = <&l2_0>; capacity-dmips-mhz = <530>; + #cooling-cells = <2>; }; cpu2: cpu@200 {@@ -62,6 +65,7 @@ clock-frequency = <1701000000>; next-level-cache = <&l2_0>; capacity-dmips-mhz = <530>; + #cooling-cells = <2>; }; cpu3: cpu@300 {@@ -72,6 +76,7 @@ clock-frequency = <1701000000>; next-level-cache = <&l2_0>; capacity-dmips-mhz = <530>; + #cooling-cells = <2>; }; cpu4: cpu@400 {@@ -82,6 +87,7 @@ clock-frequency = <2171000000>; next-level-cache = <&l2_1>; capacity-dmips-mhz = <1024>; + #cooling-cells = <2>; }; cpu5: cpu@500 {@@ -92,6 +98,7 @@ clock-frequency = <2171000000>; next-level-cache = <&l2_1>; capacity-dmips-mhz = <1024>; + #cooling-cells = <2>; }; cpu6: cpu@600 {@@ -102,6 +109,7 @@ clock-frequency = <2171000000>; next-level-cache = <&l2_1>; capacity-dmips-mhz = <1024>; + #cooling-cells = <2>; }; cpu7: cpu@700 {@@ -112,6 +120,7 @@ clock-frequency = <2171000000>; next-level-cache = <&l2_1>; capacity-dmips-mhz = <1024>; + #cooling-cells = <2>; }; cpu-map {@@ -178,6 +187,140 @@ method = "smc"; }; + thermal-zones { + soc_max { + polling-delay = <1000>; /* milliseconds */ + polling-delay-passive = <1000>; /* milliseconds */ + thermal-sensors = <&lvts 0>;
arch/arm64/boot/dts/mediatek/mt8192.dtsi line 204
Quoted 10 lines
arch/arm64/boot/dts/mediatek/mt8192.dtsi +10
-0+ sustainable-power = <1500>; + + trips { + threshold: trip-point@0 { + temperature = <68000>; + hysteresis = <2000>; + type = "passive"; + }; + + target: target@1 {
Please review the node names.
Quoted 18 lines
arch/arm64/boot/dts/mediatek/mt8192.dtsi +18
-0+ temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + soc_max_crit: soc_max_crit@0 { + temperature = <115000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&target>; + cooling-device = <&cpu0 + THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>,
arch/arm64/boot/dts/mediatek/mt8192.dtsi line 232
Quoted 10 lines
arch/arm64/boot/dts/mediatek/mt8192.dtsi +10
-0+ <&cpu1 + THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>, + <&cpu2 + THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>, + <&cpu3 + THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + contribution = <3072>;
By binding description value is in per-cent, 3072 does not make sense.
Quoted 6 lines
arch/arm64/boot/dts/mediatek/mt8192.dtsi +6
-0+ }; + map1 { + trip = <&target>; + cooling-device = <&cpu4 + THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>,
arch/arm64/boot/dts/mediatek/mt8192.dtsi line 248
Quoted 10 lines
arch/arm64/boot/dts/mediatek/mt8192.dtsi +10
-0+ <&cpu5 + THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>, + <&cpu6 + THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>, + <&cpu7 + THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + contribution = <1024>;
Same here.
arch/arm64/boot/dts/mediatek/mt8192.dtsi line 214
Quoted 3 lines
arch/arm64/boot/dts/mediatek/mt8192.dtsi +3
-0+ }; + }; + };
New line here.
Quoted 60 lines
arch/arm64/boot/dts/mediatek/mt8192.dtsi +60
-0+ cpu_big1 { + polling-delay = <0>; /* milliseconds */ + polling-delay-passive = <0>; /* milliseconds */ + thermal-sensors = <&lvts 1>; + }; + cpu_big2 { + polling-delay = <0>; /* milliseconds */ + polling-delay-passive = <0>; /* milliseconds */ + thermal-sensors = <&lvts 2>; + }; + cpu_big3 { + polling-delay = <0>; /* milliseconds */ + polling-delay-passive = <0>; /* milliseconds */ + thermal-sensors = <&lvts 3>; + }; + cpu_big4 { + polling-delay = <0>; /* milliseconds */ + polling-delay-passive = <0>; /* milliseconds */ + thermal-sensors = <&lvts 4>; + }; + cci1 { + polling-delay = <0>; /* milliseconds */ + polling-delay-passive = <0>; /* milliseconds */ + thermal-sensors = <&lvts 5>; + }; + cci2 { + polling-delay = <0>; /* milliseconds */ + polling-delay-passive = <0>; /* milliseconds */ + thermal-sensors = <&lvts 6>; + }; + cpu_little1 { + polling-delay = <0>; /* milliseconds */ + polling-delay-passive = <0>; /* milliseconds */ + thermal-sensors = <&lvts 7>; + }; + cpu_little2 { + polling-delay = <0>; /* milliseconds */ + polling-delay-passive = <0>; /* milliseconds */ + thermal-sensors = <&lvts 8>; + }; + apu { + polling-delay = <0>; /* milliseconds */ + polling-delay-passive = <0>; /* milliseconds */ + thermal-sensors = <&lvts 9>; + }; + mlda { + polling-delay = <0>; /* milliseconds */ + polling-delay-passive = <0>; /* milliseconds */ + thermal-sensors = <&lvts 10>; + }; + gpu1 { + polling-delay = <0>; /* milliseconds */ + polling-delay-passive = <0>; /* milliseconds */ + thermal-sensors = <&lvts 11>; + }; + gpu2 { + polling-delay = <0>; /* milliseconds */ + polling-delay-passive = <0>; /* milliseconds */ + thermal-sensors = <&lvts 12>; + };
arch/arm64/boot/dts/mediatek/mt8192.dtsi line 321
Quoted 10 lines
arch/arm64/boot/dts/mediatek/mt8192.dtsi +10
-0+ infra { + polling-delay = <0>; /* milliseconds */ + polling-delay-passive = <0>; /* milliseconds */ + thermal-sensors = <&lvts 13>; + }; + camsys { + polling-delay = <0>; /* milliseconds */ + polling-delay-passive = <0>; /* milliseconds */ + thermal-sensors = <&lvts 14>; + };
I think I'm missing something. We are creating a whole bunch of thermal zones, but no trip points neither cooling maps for them. What are the needed for?
arch/arm64/boot/dts/mediatek/mt8192.dtsi line 373
Quoted 13 lines
arch/arm64/boot/dts/mediatek/mt8192.dtsi +6
-0+ }; + timer: timer { compatible = "arm,armv8-timer"; interrupt-parent = <&gic>;@@ -224,6 +367,10 @@ compatible = "mediatek,mt8192-infracfg", "syscon"; reg = <0 0x10001000 0 0x1000>; #clock-cells = <1>; + ti,reset-bits = < + 0x120 0 0x124 0 0 0 (ASSERT_SET | DEASSERT_SET | STATUS_NONE) + 0x730 12 0x734 12 0 0 (ASSERT_SET | DEASSERT_SET | STATUS_NONE) + >;
How is that related to the commit message? Looks to me like a separate patch.
arch/arm64/boot/dts/mediatek/mt8192.dtsi line 469
Quoted 9 lines
arch/arm64/boot/dts/mediatek/mt8192.dtsi +2
-0}; pericfg: syscon@10003000 {@@ -318,6 +465,24 @@ status = "disabled"; }; + lvts: lvts@1100b000 { + compatible = "mediatek,mt6873-lvts";
This driver is not upstream. Please provide a link to the submission of the latest version so that I can track progress.
Regards,
Matthias