Skip to contentSkip to conversation

ARM: BCM5301X: Netgear R6250 add USB GPIO

PATCH New Hauke Mehrtens 2 participants 2 messages Sep 19, 2015 – Sep 21, 2015 Device tree bindings

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ARM: BCM5301X: Netgear R6250 add USB GPIO

Add GPIO number which is needed to activate the USB power supply.

---
 arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 11 +++++++++++
 1 file changed, 11 insertions(+)
arch/arm/boot/dts/bcm4708-netgear-r6250.dts +11 -0
index 64b8d10..ca92bba 100644
@@ -24,6 +24,17 @@
 		reg = <0x00000000 0x08000000>;
 	};
 
+	axi at 18000000 {
+		usb3 at 23000 {
+			reg = <0x00023000 0x1000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
Signature · 1 line
2.1.4
#1 lore raw

PATCH 1/1 ARM: BCM5301X: Netgear R6250 add USB GPIO

Quoted 3 lines · Hauke Mehrtens

Add GPIO number which is needed to activate the USB power supply.

Applied to devicetree/next, thanks!

Signature · 1 line
Florian