tbs2910: explicitly set boot address
PATCH 1/1 tbs2910: explicitly set boot address
Set missing boot address in bootm command. This fixes the error:
Wrong Image Format for bootm command
ERROR: can't get kernel image!
---
Cc: Stefano Babic <[email protected]>
Cc: Uwe Scheffler <[email protected]>
--- include/configs/tbs2910.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
include/configs/tbs2910.h +1 -1
@@ -190,7 +190,7 @@"bootargs_upd=setenv bootargs console=ttymxc0,115200 " \"rdinit=/sbin/init enable_wait_mode=off\0" \"bootcmd_mmc=run bootargs_mmc; mmc dev 2; " \ -"mmc read 0x10800000 0x800 0x4000; bootm\0" \ +"mmc read 0x10800000 0x800 0x4000; bootm 0x10800000\0" \"bootcmd_up1=load mmc 1 0x10800000 uImage\0" \"bootcmd_up2=load mmc 1 0x10d00000 uramdisk.img; " \"run bootargs_upd; " \
Signature · 1 line
1.9.1
PATCH 1/1 tbs2910: explicitly set boot address
Quoted 10 lines · Soeren Moch
Set missing boot address in bootm command. This fixes the error:
Wrong Image Format for bootm command
ERROR: can't get kernel image!Reported-by Uwe Scheffler <[email protected]>Signed-off-by Soeren Moch <[email protected]>Tested-by Uwe Scheffler <[email protected]>---
Cc: Stefano Babic <[email protected]>
Cc: Uwe Scheffler <[email protected]>
Stefano, Tom,
since this fixes a user reported error, can we pull this in for v2015.10?
Thanks,
Soeren
Quoted 18 lines
--- include/configs/tbs2910.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)include/configs/tbs2910.h +1
-1@@ -190,7 +190,7 @@"bootargs_upd=setenv bootargs console=ttymxc0,115200 " \"rdinit=/sbin/init enable_wait_mode=off\0" \"bootcmd_mmc=run bootargs_mmc; mmc dev 2; " \ -"mmc read 0x10800000 0x800 0x4000; bootm\0" \ +"mmc read 0x10800000 0x800 0x4000; bootm 0x10800000\0" \"bootcmd_up1=load mmc 1 0x10800000 uImage\0" \"bootcmd_up2=load mmc 1 0x10d00000 uramdisk.img; " \"run bootargs_upd; " \
PATCH 1/1 tbs2910: explicitly set boot address
Hi Soeren,
Quoted 12 lines · Soeren Moch
Quoted 10 lines · Soeren Moch
Set missing boot address in bootm command. This fixes the error:
Wrong Image Format for bootm command
ERROR: can't get kernel image!Reported-by Uwe Scheffler <[email protected]>Signed-off-by Soeren Moch <[email protected]>Tested-by Uwe Scheffler <[email protected]>---
Cc: Stefano Babic <[email protected]>
Cc: Uwe Scheffler <[email protected]>
Quoted 4 lines
Stefano, Tom,
since this fixes a user reported error, can we pull this in for v2015.10?
ok, I'll pick it up.
Regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================