doc: Add documentation about devicetree usage
PATCH 1/1 doc: Add documentation about devicetree usage
At present some of the ideas and techniques behind devicetree in U-Boot are assumed, implied or unsaid. Add some documentation to cover how devicetree is build, how it can be modified and the rules about using the various CONFIG_OF_... options.
---
doc/develop/index.rst | 1 + doc/develop/package/devicetree.rst | 315 +++++++++++++++++++++++++++++ doc/develop/package/index.rst | 1 + 3 files changed, 317 insertions(+) create mode 100644 doc/develop/package/devicetree.rst
doc/develop/index.rst +1 -0
@@ -36,6 +36,7 @@ Packaging :maxdepth: 1 package/index + package/devicetree Testing -------
doc/develop/package/devicetree.rst new file +315 -0
315 lines not on this page · raw message
doc/develop/package/index.rst +1 -0
@@ -17,3 +17,4 @@ SPI flash. :maxdepth: 2 binman + devicetree
Signature · 1 line
2.33.0.259.gc128427fd7-goog
+Ilias Apalodimas
Quoted 360 lines · Simon Glass
At present some of the ideas and techniques behind devicetree in U-Boot are assumed, implied or unsaid. Add some documentation to cover how devicetree is build, how it can be modified and the rules about using the various
CONFIG_OF_... options.Signed-off-by Simon Glass <[email protected]>---
doc/develop/index.rst | 1 + doc/develop/package/devicetree.rst | 315 +++++++++++++++++++++++++++++ doc/develop/package/index.rst | 1 + 3 files changed, 317 insertions(+) create mode 100644 doc/develop/package/devicetree.rstdoc/develop/index.rst +1
-0@@ -36,6 +36,7 @@ Packaging :maxdepth: 1 package/index + package/devicetree Testing -------doc/develop/package/devicetree.rst new file +315
-0@@ -0,0 +1,315 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +Updating the devicetree +======================= + +U-Boot uses devicetree for runtime configuration and storing required blobs or +any other information it needs to operate. It is possible to update the +devicetree separately from actually building U-Boot. This provides a good degree +of control and flexibility for firmware that uses U-Boot in conjunction with +other project. + +There are many reasons why it is useful to modify the devicetree after building +it: + +- Configuration can be changed, e.g. which UART to use +- A serial number can be added +- Public keys can be added to allow image verification +- Console output can be changed (e.g. to select serial or vidconsole) + +This section describes how to work with devicetree to accomplish your goals. + +See also :doc:`../devicetree/control` for a basic summary of the available +features. + + +Devicetree source +----------------- + +Every board in U-Boot must include a devicetree sufficient to build and boot +that board on suitable hardware (or emulation). This is specified using the +`CONFIG DEFAULT_DEVICE_TREE` option. + + +Current situation (August 2021) +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +As an aside, at present U-Boot allows `CONFIG_DEFAULT_DEVICE_TREE` to be empty, +e.g. if `CONFIG_OF_BOARD` or `CONFIG_OF_PRIOR_STAGE` are used. This has +unfortunately created an enormous amount of confusion and some wasted effort. +This was not intended and this bug will be fixed soon. Specifically: + +- `CONFIG_OF_BOARD` was added in rpi_patch_ for Raspberry Pi, which does have + an in-tree devicetree, but this feature has since been used for boards that + don't +- `CONFIG_OF_PRIOR_STAGE` was added in bcm_patch_ as part of a larger Broadcom + change with a tag indicating it only affected one board, so the change in + behaviour was not noticed at the time. It has since been used by RISC-V qemu + boards. + +Once this bug is fixed, CONFIG_OF_BOARD and CONFIG_OF_PRIOR_STAGE will override +(at runtime) the devicetree suppled with U-Boot, but will otherwise use +CONFIG_OF_SEPARATE for the in-tree build. So these two will become options, +moving out of the 'choice' in `dts/Kconfig` + +Offending boards are: + +- bcm7260 +- bcm7445 +- qemu_arm64 +- qemu_arm +- qemu-ppce500 +- qemu-riscv32 +- qemu-riscv32_smode +- qemu-riscv64 +- qemu-riscv64_smode + +All of these need to have a devicetree added in-tree. This is targeted to be +fixed in the 2022.01 release. + + +Building the devicetree +----------------------- + +U-Boot automatically builds the devicetree for a board, from the +`arch/<arch>/dts` directory. The Makefile in those directories has rules for +building devicetree files. It is preferable to avoid target-specific rules in +those files: i.e. all boards for a particular SoC should be built at once, +where practical. Apart from simplifying the Makefile, this helps to efficiently +(and immediately) ensure that changes in one board's DT do not break others that +are related. Building devicetrees is fast, so performance is seldom a concern +here. + + +Overriding the default devicetree +--------------------------------- + +When building U-Boot, the `DEVICE_TREE` environment variable allows the +default devicetree file to be overridden at build time. This can be useful if +modifications have to be made to the in-tree devicetree file, for the benefit +of a downstream build system. Note that the in-tree devicetree must be +sufficient to build and boot, so this is not a way to bypass that requirement. + + +Modifying the devicetree after building +--------------------------------------- + +While it is generally painful and hacky to modify the code or rodata of a +program after it is built, in many cases it is useul to do so, e.g. to add +configuration information like serial numbers, enabling/disabling features, etc. + +Devicetree provides a very nice solution to these problems since it is +structured data and it is relatively easy to change it, even in binary form +(see fdtput). + +U-Boot takes care that the devicetree is easily accessible after the build +process. In fact it is placed in a separate file called `u-boot.dtb`. If the +build system wants to modify or replace that file, it can do so. Then all that +is needed is to run `binman update` to update the file inside the image. If +binman is not used, then `u-boot-nodtb.bin` and the new `u-boot.dtb` can simply +be concatenated to achieve the desired result. U-Boot happily copes with the +devicetree growing or shrinking. + +The `u-boot.bin` image contains both pieces. While it is possible to locate the +devicetree within the image using the signature at the start of the file, this +is a bit messy. + +This is why `CONFIG_OF_SEPARATE` should always be used when building U-Boot. +The `CONFIG_OF_EMBED` option embeds the devicetree somewhere in the U-Boot ELF +image as rodata, meaning that it is hard to find it and it cannot increase in +size. + +When modifying the devicetree, the different cases to consider are as follows: + +- CONFIG_OF_SEPARATE + This is easy, described above. Just change, replace or rebuild the + devicetree so it suits your needs, then rerun binman or redo the `cat` + operation to join `u-boot-nodtb.bin` and the new `u-boot.dtb` + +- CONFIG_OF_EMBD + This is tricky, since the devicetree cannot easily be located. If the EFL + file is available, then the _dtb_dt_begin and __dtb_dt_end symbols can be + examined to find it. While it is possible to contract the file, it is not + possible to expand the file since that would involve re-linking + +- CONFIG_OF_PRIOR_STAGE + In this case the devicetree must be modified in the project which provides + it, as described below + +- CONFIG_OF_BOARD + This is a board-specific situation, so needs to be considered on a + case-by-case base. The devicetree must be modified so that the correct + one is provided to U-Boot. How this is done depends entirely on the + implementation of this option for the board. It might require injecting the + changes into a different project somehow using tooling available there, or + it might involve merging an overlay file at runtime to obtain the desired + result. + + +Devicetree in another project +----------------------------- + +In some cases U-Boot receive its devicetree at runtime from a program that calls +it. For example ARM's Trusted Firmware A (`TF-A`_) may have a devicetree that it +passes to U-Boot. This overrides any devicetree build by U-Boot. When packaging +the firmware, the U-Boot devicetree may in fact be left out if it can be +guaranteed that it will receive one from another project. + +In this case, the devicetree in the other project must track U-Boot's use of +device tree. It must provide a way to add configuration and other information to +the devicetree for use by U-Boot, such as the /config node. Note that the +U-Boot in-tree devicetree must be sufficient to build and boot, so this is not a +way to bypass that requirement. + +If binman is used, the in-tree U-Boot devicetree must contain the binman +definition so that a valid image can be build. + +If verified boot is used, the project must provide a way to inject a public key, +certificate or other material into the U-Boot devicetree so that it is available +to U-Boot at runtime. See `Signing with U-Boot devicetree`_. This may be +through tooling in the project itself or by making use of U-Boot's tooling. + + +Devicetree generated on-the-fly in another project +-------------------------------------------------- + +In some rare cases, another project may wish to create a devicetree for U-Boot +entirely on-the-fly, then pass it to U-Boot at runtime. The only known example +of this at the time of writing (2021) is qemu, for ARM (`QEMU ARM`_) and +RISC-V (`QEMU RISC-V`_). + +In this case, the devicetree in the other project must track U-Boot's use of +device tree, so that it remains compatible. If a particular version of the +project is needed for a particular version of U-Boot, that must be documented +in both projects. + +Further, it must provide a way to add configuration and other information to +the devicetree for use by U-Boot, such as the `/config` node. Note that the +U-Boot in-tree devicetree must be sufficient to build and boot, so this is not a +way to bypass that requirement. + +More specifically, tooling or command-line arguments must provide a way to +add a `/config` node or items within that node, so that U-Boot can receive a +suitable configuration. These options can then be used as part of the build +process, which puts the firmware image together. For binman, a way must be +provided to add the binman definition into the devicetree in the same way. + +One way to do this is to allow a .dtsi file to be merged in with the generated +devicetree. + + +Passing the devicetree through to Linux +--------------------------------------- + +Ideally U-Boot and Linux use the same devicetree source, even though it is +hosted in separate projects. U-Boot adds some extra pieces, such as the +`config/` node and tags like `u-boot,dm-spl`. Linux adds some extra pieces, such +as `linux,default-trigger` and `linux,code`. This should not interfere with +each other. + +In principle it is possible for U-Boot's control devicetree to be passed to +Linux. This is, after all, one of the goals of devicetree and the original +Open Firmware project, to have the firmware provide the hardware description to +the Operating System. + +For boards where this approach is used, care must be taken. U-Boot typically +needs to 'fix up' the devicetree before passing it to Linux, e.g. to add +information about the memory map, about which serial console is used, provide +the root hash for dm-verify or select whether the console should be silenced for +a faster boot. + +Fix-ups involve modifying the devicetree. If the control devicetree is used, +that means the control devicetree could be modified, while U-Boot is using it. +Removing a device and reinserting it can cause problems if the devicetree offset +has changed, for example, since the device will be unable to locates its +devicetree properties at the expected devicetree offset, which is a fixed +integer. + +To deal with this, it is recommended to employ one or more of the following +approaches: + +- Make a copy of the devicetree and 'fix up' the copy, leaving the control + devicetree alone +- Enable `CONFIG_OF_LIVE` so that U-Boot makes its own copy of the devicetree + during relocation; fixups then happen on the original flat tree +- Ensure that fix-ups happen after all loading has happened and U-Boot has + completed image verification + +In practice,the last point is typically observed, since boot_prep_linux() is +called just before jumping to Linux, long after signature verification, for +example. But it is important to make sure that this line is not blurred, +particularly if untrusted user data in involved. + + +Devicetree use cases that must be supported +------------------------------------------- + +Regardless of how the devicetree is provided to U-Boot at runtime, various +U-Boot features must be fully supported. This section describes some of these +features and the implications for other projects. + +If U-Boot uses its own in-tree devicetree these features are supported +automatically. + + +Signing with U-Boot devicetree +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +U-Boot supports signing a payload so that it can be verified to have been +created by a party owning a private key. This is called verified boot in U-Boot +(see doc/uImage.FIT/verified-boot.txt). + +Typically this works by creating a FIT and then running the `mkimage` tool to +add signatures for particular images. As part of this process, `mkimage` writes +a public key to the U-Boot devicetree, although this can be done separately. + +As with all configuration information, if another project is providing the +devicetree to U-Boot, it must provide a way to add this public key into the +devicetree it passes to U-Boot. This could be via a tooling option, making use +of `mkimage`, or alowing a .dtsi file to be merged in with what is generated in +the other project. + + +Providing the binman image definition +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +In complex systems U-Boot must locate and make use of other firmware components, +such as images for the user interface, files containing peripheral firmware, +multiple copies of U-Boot for use with A/B boot, etc. U-Boot uses +:doc:`Binman <binman>` as a standard way of putting an image together. + +Typically this works by running binman with the devicetree as an input, to +create the file image. Binman then outputs an updated devicetree which is +packed in the firmware image, so U-Boot can access the binman definition and +locate all the components. + +As with all configuration information, if another project is providing the +devicetree to U-Boot, it must provide a way to add this binman definition into +the devicetree it passes to U-Boot. This could be via a tooling option, making +use of `binman`, or alowing a .dtsi file to be merged in with what is generated +in the other project. + + +Protecting the devicetree +------------------------- + +U-Boot relies heavily on devicetree for correct operation. A corrupt or invalid +device can cause U-Boot to fail to start, behave incorrectly, crash (e.g. if +`CONFIG_OF_LIBFDT_ASSUME_MASK` is adjusted, or fail to boot an Operating System. +Within U-Boot, the devicetree is as important as any other part of the source +code. At ruuntime, the devicetree can be considered to be structured rodata. + +With secure systems, care must be taken that the devicetree is valid: + +- If the code / rodata has a hash or signature, the devicetree should also, if + they are packaged separately. +- If the code / rodata is write-protected when running, the devicetree should be + also. Note that U-Boot relocates its code and devicetree, so this is not as + simple as it sounds. U-Boot must write-protect these items after relocating. + + +.. _rpi_patch: https://patchwork.ozlabs.org/project/uboot/patch/[email protected]/ +.. _bcm_patch: https://patchwork.ozlabs.org/project/uboot/patch/16fc0901f4521d3c399eac950c52a634b2f9473b.1528485916.git.fitzsim@fitzsim.org/ +.. _`TF-A`: https://www.trustedfirmware.org/projects/tf-a +.. _`QEMU ARM`: https://github.com/qemu/qemu/blob/master/hw/arm/virt.c +.. _`QEMU RISC-V`: https://github.com/qemu/qemu/blob/master/hw/riscv/virt.cdoc/develop/package/index.rst +1
-1@@ -17,3 +17,4 @@ SPI flash. :maxdepth: 2 binman + devicetree --2.33.0.259.gc128427fd7-goog
Quoted 32 lines · Simon Glass
At present some of the ideas and techniques behind devicetree in U-Boot are assumed, implied or unsaid. Add some documentation to cover how devicetree is build, how it can be modified and the rules about using the various
CONFIG_OF_... options.Signed-off-by Simon Glass <[email protected]>---
doc/develop/index.rst | 1 + doc/develop/package/devicetree.rst | 315 +++++++++++++++++++++++++++++ doc/develop/package/index.rst | 1 + 3 files changed, 317 insertions(+)create mode 100644
doc/develop/package/devicetree.rstdoc/develop/index.rst +1
-0@@ -36,6 +36,7 @@ Packaging :maxdepth: 1 package/index + package/devicetree Testing -------doc/develop/package/devicetree.rst new file +0
-0
doc/develop/package/devicetree.rst line 10
Quoted 10 lines
doc/develop/package/devicetree.rst new file +10
-0@@ -0,0 +1,315 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +Updating the devicetree +======================= + +U-Boot uses devicetree for runtime configuration and storing required blobs or +any other information it needs to operate. It is possible to update the +devicetree separately from actually building U-Boot. This provides a good degree +of control and flexibility for firmware that uses U-Boot in conjunction with +other project.
nit: projects
Quoted 78 lines
doc/develop/package/devicetree.rst new file +78
-0+ +There are many reasons why it is useful to modify the devicetree after building +it: + +- Configuration can be changed, e.g. which UART to use +- A serial number can be added +- Public keys can be added to allow image verification +- Console output can be changed (e.g. to select serial or vidconsole) + +This section describes how to work with devicetree to accomplish your goals. + +See also :doc:`../devicetree/control` for a basic summary of the available +features. + + +Devicetree source +----------------- + +Every board in U-Boot must include a devicetree sufficient to build and boot +that board on suitable hardware (or emulation). This is specified using the +`CONFIG DEFAULT_DEVICE_TREE` option. + + +Current situation (August 2021) +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +As an aside, at present U-Boot allows `CONFIG_DEFAULT_DEVICE_TREE` to be empty, +e.g. if `CONFIG_OF_BOARD` or `CONFIG_OF_PRIOR_STAGE` are used. This has +unfortunately created an enormous amount of confusion and some wasted effort. +This was not intended and this bug will be fixed soon. Specifically: + +- `CONFIG_OF_BOARD` was added in rpi_patch_ for Raspberry Pi, which does have + an in-tree devicetree, but this feature has since been used for boards that + don't +- `CONFIG_OF_PRIOR_STAGE` was added in bcm_patch_ as part of a larger Broadcom + change with a tag indicating it only affected one board, so the change in + behaviour was not noticed at the time. It has since been used by RISC-V qemu + boards. + +Once this bug is fixed, CONFIG_OF_BOARD and CONFIG_OF_PRIOR_STAGE will override +(at runtime) the devicetree suppled with U-Boot, but will otherwise use +CONFIG_OF_SEPARATE for the in-tree build. So these two will become options, +moving out of the 'choice' in `dts/Kconfig` + +Offending boards are: + +- bcm7260 +- bcm7445 +- qemu_arm64 +- qemu_arm +- qemu-ppce500 +- qemu-riscv32 +- qemu-riscv32_smode +- qemu-riscv64 +- qemu-riscv64_smode + +All of these need to have a devicetree added in-tree. This is targeted to be +fixed in the 2022.01 release. + + +Building the devicetree +----------------------- + +U-Boot automatically builds the devicetree for a board, from the +`arch/<arch>/dts` directory. The Makefile in those directories has rules for +building devicetree files. It is preferable to avoid target-specific rules in +those files: i.e. all boards for a particular SoC should be built at once, +where practical. Apart from simplifying the Makefile, this helps to efficiently +(and immediately) ensure that changes in one board's DT do not break others that +are related. Building devicetrees is fast, so performance is seldom a concern +here. + + +Overriding the default devicetree +--------------------------------- + +When building U-Boot, the `DEVICE_TREE` environment variable allows the +default devicetree file to be overridden at build time. This can be useful if
doc/develop/package/devicetree.rst line 98
Quoted 10 lines
doc/develop/package/devicetree.rst new file +10
-0+modifications have to be made to the in-tree devicetree file, for the benefit +of a downstream build system. Note that the in-tree devicetree must be +sufficient to build and boot, so this is not a way to bypass that requirement. + + +Modifying the devicetree after building +--------------------------------------- + +While it is generally painful and hacky to modify the code or rodata of a +program after it is built, in many cases it is useul to do so, e.g. to add
nit: useful
Quoted 87 lines
doc/develop/package/devicetree.rst new file +87
-0+configuration information like serial numbers, enabling/disabling features, etc. + +Devicetree provides a very nice solution to these problems since it is +structured data and it is relatively easy to change it, even in binary form +(see fdtput). + +U-Boot takes care that the devicetree is easily accessible after the build +process. In fact it is placed in a separate file called `u-boot.dtb`. If the +build system wants to modify or replace that file, it can do so. Then all that +is needed is to run `binman update` to update the file inside the image. If +binman is not used, then `u-boot-nodtb.bin` and the new `u-boot.dtb` can simply +be concatenated to achieve the desired result. U-Boot happily copes with the +devicetree growing or shrinking. + +The `u-boot.bin` image contains both pieces. While it is possible to locate the +devicetree within the image using the signature at the start of the file, this +is a bit messy. + +This is why `CONFIG_OF_SEPARATE` should always be used when building U-Boot. +The `CONFIG_OF_EMBED` option embeds the devicetree somewhere in the U-Boot ELF +image as rodata, meaning that it is hard to find it and it cannot increase in +size. + +When modifying the devicetree, the different cases to consider are as follows: + +- CONFIG_OF_SEPARATE + This is easy, described above. Just change, replace or rebuild the + devicetree so it suits your needs, then rerun binman or redo the `cat` + operation to join `u-boot-nodtb.bin` and the new `u-boot.dtb` + +- CONFIG_OF_EMBD + This is tricky, since the devicetree cannot easily be located. If the EFL + file is available, then the _dtb_dt_begin and __dtb_dt_end symbols can be + examined to find it. While it is possible to contract the file, it is not + possible to expand the file since that would involve re-linking + +- CONFIG_OF_PRIOR_STAGE + In this case the devicetree must be modified in the project which provides + it, as described below + +- CONFIG_OF_BOARD + This is a board-specific situation, so needs to be considered on a + case-by-case base. The devicetree must be modified so that the correct + one is provided to U-Boot. How this is done depends entirely on the + implementation of this option for the board. It might require injecting the + changes into a different project somehow using tooling available there, or + it might involve merging an overlay file at runtime to obtain the desired + result. + + +Devicetree in another project +----------------------------- + +In some cases U-Boot receive its devicetree at runtime from a program that calls +it. For example ARM's Trusted Firmware A (`TF-A`_) may have a devicetree that it +passes to U-Boot. This overrides any devicetree build by U-Boot. When packaging +the firmware, the U-Boot devicetree may in fact be left out if it can be +guaranteed that it will receive one from another project. + +In this case, the devicetree in the other project must track U-Boot's use of +device tree. It must provide a way to add configuration and other information to +the devicetree for use by U-Boot, such as the /config node. Note that the +U-Boot in-tree devicetree must be sufficient to build and boot, so this is not a +way to bypass that requirement. + +If binman is used, the in-tree U-Boot devicetree must contain the binman +definition so that a valid image can be build. + +If verified boot is used, the project must provide a way to inject a public key, +certificate or other material into the U-Boot devicetree so that it is available +to U-Boot at runtime. See `Signing with U-Boot devicetree`_. This may be +through tooling in the project itself or by making use of U-Boot's tooling. + + +Devicetree generated on-the-fly in another project +-------------------------------------------------- + +In some rare cases, another project may wish to create a devicetree for U-Boot +entirely on-the-fly, then pass it to U-Boot at runtime. The only known example +of this at the time of writing (2021) is qemu, for ARM (`QEMU ARM`_) and +RISC-V (`QEMU RISC-V`_). + +In this case, the devicetree in the other project must track U-Boot's use of +device tree, so that it remains compatible. If a particular version of the +project is needed for a particular version of U-Boot, that must be documented +in both projects. +
doc/develop/package/devicetree.rst line 195
Quoted 10 lines
doc/develop/package/devicetree.rst new file +10
-0+Further, it must provide a way to add configuration and other information to +the devicetree for use by U-Boot, such as the `/config` node. Note that the +U-Boot in-tree devicetree must be sufficient to build and boot, so this is not a +way to bypass that requirement. + +More specifically, tooling or command-line arguments must provide a way to +add a `/config` node or items within that node, so that U-Boot can receive a +suitable configuration. These options can then be used as part of the build +process, which puts the firmware image together. For binman, a way must be +provided to add the binman definition into the devicetree in the same way.
Can you elaborate on the purpose here? What sort of things go into /config which can't be set at compile-time?
Quoted 13 lines
doc/develop/package/devicetree.rst new file +13
-0+ +One way to do this is to allow a .dtsi file to be merged in with the generated +devicetree. + + +Passing the devicetree through to Linux +--------------------------------------- + +Ideally U-Boot and Linux use the same devicetree source, even though it is +hosted in separate projects. U-Boot adds some extra pieces, such as the +`config/` node and tags like `u-boot,dm-spl`. Linux adds some extra pieces, such +as `linux,default-trigger` and `linux,code`. This should not interfere with +each other.
doc/develop/package/devicetree.rst line 218
Quoted 10 lines
doc/develop/package/devicetree.rst new file +10
-0+ +In principle it is possible for U-Boot's control devicetree to be passed to +Linux. This is, after all, one of the goals of devicetree and the original +Open Firmware project, to have the firmware provide the hardware description to +the Operating System. + +For boards where this approach is used, care must be taken. U-Boot typically +needs to 'fix up' the devicetree before passing it to Linux, e.g. to add +information about the memory map, about which serial console is used, provide +the root hash for dm-verify or select whether the console should be silenced for
nit: dm-verity
Is the property for this documented anywhere? A quick grep doesn't find it in Linux.
Quoted 13 lines
doc/develop/package/devicetree.rst new file +13
-0+a faster boot. + +Fix-ups involve modifying the devicetree. If the control devicetree is used, +that means the control devicetree could be modified, while U-Boot is using it. +Removing a device and reinserting it can cause problems if the devicetree offset +has changed, for example, since the device will be unable to locates its +devicetree properties at the expected devicetree offset, which is a fixed +integer. + +To deal with this, it is recommended to employ one or more of the following +approaches: + +- Make a copy of the devicetree and 'fix up' the copy, leaving the control
doc/develop/package/devicetree.rst line 241
Quoted 10 lines
doc/develop/package/devicetree.rst new file +10
-0+ devicetree alone +- Enable `CONFIG_OF_LIVE` so that U-Boot makes its own copy of the devicetree + during relocation; fixups then happen on the original flat tree +- Ensure that fix-ups happen after all loading has happened and U-Boot has + completed image verification + +In practice,the last point is typically observed, since boot_prep_linux() is +called just before jumping to Linux, long after signature verification, for +example. But it is important to make sure that this line is not blurred, +particularly if untrusted user data in involved.
nit: is
Quoted 13 lines
doc/develop/package/devicetree.rst new file +13
-0+ + +Devicetree use cases that must be supported +------------------------------------------- + +Regardless of how the devicetree is provided to U-Boot at runtime, various +U-Boot features must be fully supported. This section describes some of these +features and the implications for other projects. + +If U-Boot uses its own in-tree devicetree these features are supported +automatically. + +
doc/develop/package/devicetree.rst line 264
Quoted 10 lines
doc/develop/package/devicetree.rst new file +10
-0+Signing with U-Boot devicetree +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +U-Boot supports signing a payload so that it can be verified to have been +created by a party owning a private key. This is called verified boot in U-Boot +(see doc/uImage.FIT/verified-boot.txt). + +Typically this works by creating a FIT and then running the `mkimage` tool to +add signatures for particular images. As part of this process, `mkimage` writes +a public key to the U-Boot devicetree, although this can be done separately.
It would be nice to just allow adding a public key to a device tree without signing anything. ATM I have a "dummy" devicetree that I sign just to add the public key.
Quoted 14 lines
doc/develop/package/devicetree.rst new file +14
-0+As with all configuration information, if another project is providing the +devicetree to U-Boot, it must provide a way to add this public key into the +devicetree it passes to U-Boot. This could be via a tooling option, making use +of `mkimage`, or alowing a .dtsi file to be merged in with what is generated in +the other project. + + +Providing the binman image definition +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +In complex systems U-Boot must locate and make use of other firmware components, +such as images for the user interface, files containing peripheral firmware, +multiple copies of U-Boot for use with A/B boot, etc. U-Boot uses +:doc:`Binman <binman>` as a standard way of putting an image together.
doc/develop/package/devicetree.rst line 289
Quoted 10 lines
doc/develop/package/devicetree.rst new file +10
-0+ +Typically this works by running binman with the devicetree as an input, to +create the file image. Binman then outputs an updated devicetree which is +packed in the firmware image, so U-Boot can access the binman definition and +locate all the components. + +As with all configuration information, if another project is providing the +devicetree to U-Boot, it must provide a way to add this binman definition into +the devicetree it passes to U-Boot. This could be via a tooling option, making +use of `binman`, or alowing a .dtsi file to be merged in with what is generated
nit: allowing
--Sean
Quoted 36 lines
doc/develop/package/devicetree.rst new file +26
-0+in the other project. + + +Protecting the devicetree +------------------------- + +U-Boot relies heavily on devicetree for correct operation. A corrupt or invalid +device can cause U-Boot to fail to start, behave incorrectly, crash (e.g. if +`CONFIG_OF_LIBFDT_ASSUME_MASK` is adjusted, or fail to boot an Operating System. +Within U-Boot, the devicetree is as important as any other part of the source +code. At ruuntime, the devicetree can be considered to be structured rodata. + +With secure systems, care must be taken that the devicetree is valid: + +- If the code / rodata has a hash or signature, the devicetree should also, if + they are packaged separately. +- If the code / rodata is write-protected when running, the devicetree should be + also. Note that U-Boot relocates its code and devicetree, so this is not as + simple as it sounds. U-Boot must write-protect these items after relocating. + + +.. _rpi_patch: https://patchwork.ozlabs.org/project/uboot/patch/[email protected]/ +.. _bcm_patch: https://patchwork.ozlabs.org/project/uboot/patch/16fc0901f4521d3c399eac950c52a634b2f9473b.1528485916.git.fitzsim@fitzsim.org/ +.. _`TF-A`: https://www.trustedfirmware.org/projects/tf-a +.. _`QEMU ARM`: https://github.com/qemu/qemu/blob/master/hw/arm/virt.c +.. _`QEMU RISC-V`: https://github.com/qemu/qemu/blob/master/hw/riscv/virt.cdoc/develop/package/index.rst +1
-0@@ -17,3 +17,4 @@ SPI flash. :maxdepth: 2 binman + devicetree
Quoted 78 lines
From: Simon Glass <[email protected]>
Date: Fri, 27 Aug 2021 21:23:48 -0600At present some of the ideas and techniques behind devicetree in U-Boot are assumed, implied or unsaid. Add some documentation to cover how devicetree is build, how it can be modified and the rules about using the various
CONFIG_OF_... options.Signed-off-by Simon Glass <[email protected]>---
doc/develop/index.rst | 1 + doc/develop/package/devicetree.rst | 315 +++++++++++++++++++++++++++++ doc/develop/package/index.rst | 1 + 3 files changed, 317 insertions(+) create mode 100644 doc/develop/package/devicetree.rstdoc/develop/index.rst +1
-0@@ -36,6 +36,7 @@ Packaging :maxdepth: 1 package/index + package/devicetree Testing -------doc/develop/package/devicetree.rst new file +43
-0@@ -0,0 +1,315 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +Updating the devicetree +======================= + +U-Boot uses devicetree for runtime configuration and storing required blobs or +any other information it needs to operate. It is possible to update the +devicetree separately from actually building U-Boot. This provides a good degree +of control and flexibility for firmware that uses U-Boot in conjunction with +other project. + +There are many reasons why it is useful to modify the devicetree after building +it: + +- Configuration can be changed, e.g. which UART to use +- A serial number can be added +- Public keys can be added to allow image verification +- Console output can be changed (e.g. to select serial or vidconsole) + +This section describes how to work with devicetree to accomplish your goals. + +See also :doc:`../devicetree/control` for a basic summary of the available +features. + + +Devicetree source +----------------- + +Every board in U-Boot must include a devicetree sufficient to build and boot +that board on suitable hardware (or emulation). This is specified using the +`CONFIG DEFAULT_DEVICE_TREE` option. + + +Current situation (August 2021) +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +As an aside, at present U-Boot allows `CONFIG_DEFAULT_DEVICE_TREE` to be empty, +e.g. if `CONFIG_OF_BOARD` or `CONFIG_OF_PRIOR_STAGE` are used. This has +unfortunately created an enormous amount of confusion and some wasted effort. +This was not intended and this bug will be fixed soon. Specifically: + +- `CONFIG_OF_BOARD` was added in rpi_patch_ for Raspberry Pi, which does have + an in-tree devicetree, but this feature has since been used for boards that
doc/develop/package/devicetree.rst line 53
Quoted 10 lines
doc/develop/package/devicetree.rst new file +10
-0+ don't +- `CONFIG_OF_PRIOR_STAGE` was added in bcm_patch_ as part of a larger Broadcom + change with a tag indicating it only affected one board, so the change in + behaviour was not noticed at the time. It has since been used by RISC-V qemu + boards. + +Once this bug is fixed, CONFIG_OF_BOARD and CONFIG_OF_PRIOR_STAGE will override +(at runtime) the devicetree suppled with U-Boot, but will otherwise use +CONFIG_OF_SEPARATE for the in-tree build. So these two will become options, +moving out of the 'choice' in `dts/Kconfig`
Not entirely sure what you mean by this, but for the Raspberry Pi this should remain a configure option. For OpenBSD we deliberately opt to use the device tree provided by the Raspberry Pi firmware because of the DT overlays.
Quoted 5 lines
doc/develop/package/devicetree.rst new file +5
-0+ +Offending boards are: + +- bcm7260 +- bcm7445
doc/develop/package/devicetree.rst line 68
Quoted 10 lines
doc/develop/package/devicetree.rst new file +10
-0+- qemu_arm64 +- qemu_arm +- qemu-ppce500 +- qemu-riscv32 +- qemu-riscv32_smode +- qemu-riscv64 +- qemu-riscv64_smode + +All of these need to have a devicetree added in-tree. This is targeted to be +fixed in the 2022.01 release.
The Linux kernel doesn't seem to have such a requirement and doesn't provide any device trees for QEMU. So we can't just copy a device tree from there and one has to be invented. IMHO this requirement makes zero technical sense.
Quoted 258 lines
doc/develop/package/devicetree.rst new file +245
-0+Building the devicetree +----------------------- + +U-Boot automatically builds the devicetree for a board, from the +`arch/<arch>/dts` directory. The Makefile in those directories has rules for +building devicetree files. It is preferable to avoid target-specific rules in +those files: i.e. all boards for a particular SoC should be built at once, +where practical. Apart from simplifying the Makefile, this helps to efficiently +(and immediately) ensure that changes in one board's DT do not break others that +are related. Building devicetrees is fast, so performance is seldom a concern +here. + + +Overriding the default devicetree +--------------------------------- + +When building U-Boot, the `DEVICE_TREE` environment variable allows the +default devicetree file to be overridden at build time. This can be useful if +modifications have to be made to the in-tree devicetree file, for the benefit +of a downstream build system. Note that the in-tree devicetree must be +sufficient to build and boot, so this is not a way to bypass that requirement. + + +Modifying the devicetree after building +--------------------------------------- + +While it is generally painful and hacky to modify the code or rodata of a +program after it is built, in many cases it is useul to do so, e.g. to add +configuration information like serial numbers, enabling/disabling features, etc. + +Devicetree provides a very nice solution to these problems since it is +structured data and it is relatively easy to change it, even in binary form +(see fdtput). + +U-Boot takes care that the devicetree is easily accessible after the build +process. In fact it is placed in a separate file called `u-boot.dtb`. If the +build system wants to modify or replace that file, it can do so. Then all that +is needed is to run `binman update` to update the file inside the image. If +binman is not used, then `u-boot-nodtb.bin` and the new `u-boot.dtb` can simply +be concatenated to achieve the desired result. U-Boot happily copes with the +devicetree growing or shrinking. + +The `u-boot.bin` image contains both pieces. While it is possible to locate the +devicetree within the image using the signature at the start of the file, this +is a bit messy. + +This is why `CONFIG_OF_SEPARATE` should always be used when building U-Boot. +The `CONFIG_OF_EMBED` option embeds the devicetree somewhere in the U-Boot ELF +image as rodata, meaning that it is hard to find it and it cannot increase in +size. + +When modifying the devicetree, the different cases to consider are as follows: + +- CONFIG_OF_SEPARATE + This is easy, described above. Just change, replace or rebuild the + devicetree so it suits your needs, then rerun binman or redo the `cat` + operation to join `u-boot-nodtb.bin` and the new `u-boot.dtb` + +- CONFIG_OF_EMBD + This is tricky, since the devicetree cannot easily be located. If the EFL + file is available, then the _dtb_dt_begin and __dtb_dt_end symbols can be + examined to find it. While it is possible to contract the file, it is not + possible to expand the file since that would involve re-linking + +- CONFIG_OF_PRIOR_STAGE + In this case the devicetree must be modified in the project which provides + it, as described below + +- CONFIG_OF_BOARD + This is a board-specific situation, so needs to be considered on a + case-by-case base. The devicetree must be modified so that the correct + one is provided to U-Boot. How this is done depends entirely on the + implementation of this option for the board. It might require injecting the + changes into a different project somehow using tooling available there, or + it might involve merging an overlay file at runtime to obtain the desired + result. + + +Devicetree in another project +----------------------------- + +In some cases U-Boot receive its devicetree at runtime from a program that calls +it. For example ARM's Trusted Firmware A (`TF-A`_) may have a devicetree that it +passes to U-Boot. This overrides any devicetree build by U-Boot. When packaging +the firmware, the U-Boot devicetree may in fact be left out if it can be +guaranteed that it will receive one from another project. + +In this case, the devicetree in the other project must track U-Boot's use of +device tree. It must provide a way to add configuration and other information to +the devicetree for use by U-Boot, such as the /config node. Note that the +U-Boot in-tree devicetree must be sufficient to build and boot, so this is not a +way to bypass that requirement. + +If binman is used, the in-tree U-Boot devicetree must contain the binman +definition so that a valid image can be build. + +If verified boot is used, the project must provide a way to inject a public key, +certificate or other material into the U-Boot devicetree so that it is available +to U-Boot at runtime. See `Signing with U-Boot devicetree`_. This may be +through tooling in the project itself or by making use of U-Boot's tooling. + + +Devicetree generated on-the-fly in another project +-------------------------------------------------- + +In some rare cases, another project may wish to create a devicetree for U-Boot +entirely on-the-fly, then pass it to U-Boot at runtime. The only known example +of this at the time of writing (2021) is qemu, for ARM (`QEMU ARM`_) and +RISC-V (`QEMU RISC-V`_). + +In this case, the devicetree in the other project must track U-Boot's use of +device tree, so that it remains compatible. If a particular version of the +project is needed for a particular version of U-Boot, that must be documented +in both projects. + +Further, it must provide a way to add configuration and other information to +the devicetree for use by U-Boot, such as the `/config` node. Note that the +U-Boot in-tree devicetree must be sufficient to build and boot, so this is not a +way to bypass that requirement. + +More specifically, tooling or command-line arguments must provide a way to +add a `/config` node or items within that node, so that U-Boot can receive a +suitable configuration. These options can then be used as part of the build +process, which puts the firmware image together. For binman, a way must be +provided to add the binman definition into the devicetree in the same way. + +One way to do this is to allow a .dtsi file to be merged in with the generated +devicetree. + + +Passing the devicetree through to Linux +--------------------------------------- + +Ideally U-Boot and Linux use the same devicetree source, even though it is +hosted in separate projects. U-Boot adds some extra pieces, such as the +`config/` node and tags like `u-boot,dm-spl`. Linux adds some extra pieces, such +as `linux,default-trigger` and `linux,code`. This should not interfere with +each other. + +In principle it is possible for U-Boot's control devicetree to be passed to +Linux. This is, after all, one of the goals of devicetree and the original +Open Firmware project, to have the firmware provide the hardware description to +the Operating System. + +For boards where this approach is used, care must be taken. U-Boot typically +needs to 'fix up' the devicetree before passing it to Linux, e.g. to add +information about the memory map, about which serial console is used, provide +the root hash for dm-verify or select whether the console should be silenced for +a faster boot. + +Fix-ups involve modifying the devicetree. If the control devicetree is used, +that means the control devicetree could be modified, while U-Boot is using it. +Removing a device and reinserting it can cause problems if the devicetree offset +has changed, for example, since the device will be unable to locates its +devicetree properties at the expected devicetree offset, which is a fixed +integer. + +To deal with this, it is recommended to employ one or more of the following +approaches: + +- Make a copy of the devicetree and 'fix up' the copy, leaving the control + devicetree alone +- Enable `CONFIG_OF_LIVE` so that U-Boot makes its own copy of the devicetree + during relocation; fixups then happen on the original flat tree +- Ensure that fix-ups happen after all loading has happened and U-Boot has + completed image verification + +In practice,the last point is typically observed, since boot_prep_linux() is +called just before jumping to Linux, long after signature verification, for +example. But it is important to make sure that this line is not blurred, +particularly if untrusted user data in involved. + + +Devicetree use cases that must be supported +------------------------------------------- + +Regardless of how the devicetree is provided to U-Boot at runtime, various +U-Boot features must be fully supported. This section describes some of these +features and the implications for other projects. + +If U-Boot uses its own in-tree devicetree these features are supported +automatically. + + +Signing with U-Boot devicetree +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +U-Boot supports signing a payload so that it can be verified to have been +created by a party owning a private key. This is called verified boot in U-Boot +(see doc/uImage.FIT/verified-boot.txt). + +Typically this works by creating a FIT and then running the `mkimage` tool to +add signatures for particular images. As part of this process, `mkimage` writes +a public key to the U-Boot devicetree, although this can be done separately. + +As with all configuration information, if another project is providing the +devicetree to U-Boot, it must provide a way to add this public key into the +devicetree it passes to U-Boot. This could be via a tooling option, making use +of `mkimage`, or alowing a .dtsi file to be merged in with what is generated in +the other project. + + +Providing the binman image definition +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +In complex systems U-Boot must locate and make use of other firmware components, +such as images for the user interface, files containing peripheral firmware, +multiple copies of U-Boot for use with A/B boot, etc. U-Boot uses +:doc:`Binman <binman>` as a standard way of putting an image together. + +Typically this works by running binman with the devicetree as an input, to +create the file image. Binman then outputs an updated devicetree which is +packed in the firmware image, so U-Boot can access the binman definition and +locate all the components. + +As with all configuration information, if another project is providing the +devicetree to U-Boot, it must provide a way to add this binman definition into +the devicetree it passes to U-Boot. This could be via a tooling option, making +use of `binman`, or alowing a .dtsi file to be merged in with what is generated +in the other project. + + +Protecting the devicetree +------------------------- + +U-Boot relies heavily on devicetree for correct operation. A corrupt or invalid +device can cause U-Boot to fail to start, behave incorrectly, crash (e.g. if +`CONFIG_OF_LIBFDT_ASSUME_MASK` is adjusted, or fail to boot an Operating System. +Within U-Boot, the devicetree is as important as any other part of the source +code. At ruuntime, the devicetree can be considered to be structured rodata. + +With secure systems, care must be taken that the devicetree is valid: + +- If the code / rodata has a hash or signature, the devicetree should also, if + they are packaged separately. +- If the code / rodata is write-protected when running, the devicetree should be + also. Note that U-Boot relocates its code and devicetree, so this is not as + simple as it sounds. U-Boot must write-protect these items after relocating. + + +.. _rpi_patch: https://patchwork.ozlabs.org/project/uboot/patch/[email protected]/ +.. _bcm_patch: https://patchwork.ozlabs.org/project/uboot/patch/16fc0901f4521d3c399eac950c52a634b2f9473b.1528485916.git.fitzsim@fitzsim.org/ +.. _`TF-A`: https://www.trustedfirmware.org/projects/tf-a +.. _`QEMU ARM`: https://github.com/qemu/qemu/blob/master/hw/arm/virt.c +.. _`QEMU RISC-V`: https://github.com/qemu/qemu/blob/master/hw/riscv/virt.cdoc/develop/package/index.rst +1
-0@@ -17,3 +17,4 @@ SPI flash. :maxdepth: 2 binman + devicetreeSignature · 1 line
2.33.0.259.gc128427fd7-goog
Quoted 181 lines · Simon Glass
At present some of the ideas and techniques behind devicetree in U-Boot are assumed, implied or unsaid. Add some documentation to cover how devicetree is build, how it can be modified and the rules about using the various
CONFIG_OF_... options.Signed-off-by Simon Glass <[email protected]>---
doc/develop/index.rst | 1 + doc/develop/package/devicetree.rst | 315 +++++++++++++++++++++++++++++ doc/develop/package/index.rst | 1 + 3 files changed, 317 insertions(+)create mode 100644
doc/develop/package/devicetree.rstdoc/develop/index.rst +1
-0@@ -36,6 +36,7 @@ Packaging :maxdepth: 1 package/index + package/devicetree Testing -------doc/develop/package/devicetree.rst new file +149
-0@@ -0,0 +1,315 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +Updating the devicetree +======================= + +U-Boot uses devicetree for runtime configuration and storing required blobs or +any other information it needs to operate. It is possible to update the +devicetree separately from actually building U-Boot. This provides a good degree +of control and flexibility for firmware that uses U-Boot in conjunction with +other project. + +There are many reasons why it is useful to modify the devicetree after building +it: + +- Configuration can be changed, e.g. which UART to use +- A serial number can be added +- Public keys can be added to allow image verification +- Console output can be changed (e.g. to select serial or vidconsole) + +This section describes how to work with devicetree to accomplish your goals. + +See also :doc:`../devicetree/control` for a basic summary of the available +features. + + +Devicetree source +----------------- + +Every board in U-Boot must include a devicetree sufficient to build and boot +that board on suitable hardware (or emulation). This is specified using the +`CONFIG DEFAULT_DEVICE_TREE` option. + + +Current situation (August 2021) +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +As an aside, at present U-Boot allows `CONFIG_DEFAULT_DEVICE_TREE` to be empty, +e.g. if `CONFIG_OF_BOARD` or `CONFIG_OF_PRIOR_STAGE` are used. This has +unfortunately created an enormous amount of confusion and some wasted effort. +This was not intended and this bug will be fixed soon. Specifically: + +- `CONFIG_OF_BOARD` was added in rpi_patch_ for Raspberry Pi, which does have + an in-tree devicetree, but this feature has since been used for boards that + don't +- `CONFIG_OF_PRIOR_STAGE` was added in bcm_patch_ as part of a larger Broadcom + change with a tag indicating it only affected one board, so the change in + behaviour was not noticed at the time. It has since been used by RISC-V qemu + boards. + +Once this bug is fixed, CONFIG_OF_BOARD and CONFIG_OF_PRIOR_STAGE will override +(at runtime) the devicetree suppled with U-Boot, but will otherwise use +CONFIG_OF_SEPARATE for the in-tree build. So these two will become options, +moving out of the 'choice' in `dts/Kconfig` + +Offending boards are: + +- bcm7260 +- bcm7445 +- qemu_arm64 +- qemu_arm +- qemu-ppce500 +- qemu-riscv32 +- qemu-riscv32_smode +- qemu-riscv64 +- qemu-riscv64_smode + +All of these need to have a devicetree added in-tree. This is targeted to be +fixed in the 2022.01 release. + + +Building the devicetree +----------------------- + +U-Boot automatically builds the devicetree for a board, from the +`arch/<arch>/dts` directory. The Makefile in those directories has rules for +building devicetree files. It is preferable to avoid target-specific rules in +those files: i.e. all boards for a particular SoC should be built at once, +where practical. Apart from simplifying the Makefile, this helps to efficiently +(and immediately) ensure that changes in one board's DT do not break others that +are related. Building devicetrees is fast, so performance is seldom a concern +here. + + +Overriding the default devicetree +--------------------------------- + +When building U-Boot, the `DEVICE_TREE` environment variable allows the +default devicetree file to be overridden at build time. This can be useful if +modifications have to be made to the in-tree devicetree file, for the benefit +of a downstream build system. Note that the in-tree devicetree must be +sufficient to build and boot, so this is not a way to bypass that requirement. + + +Modifying the devicetree after building +--------------------------------------- + +While it is generally painful and hacky to modify the code or rodata of a +program after it is built, in many cases it is useul to do so, e.g. to add +configuration information like serial numbers, enabling/disabling features, etc. + +Devicetree provides a very nice solution to these problems since it is +structured data and it is relatively easy to change it, even in binary form +(see fdtput). + +U-Boot takes care that the devicetree is easily accessible after the build +process. In fact it is placed in a separate file called `u-boot.dtb`. If the +build system wants to modify or replace that file, it can do so. Then all that +is needed is to run `binman update` to update the file inside the image. If +binman is not used, then `u-boot-nodtb.bin` and the new `u-boot.dtb` can simply +be concatenated to achieve the desired result. U-Boot happily copes with the +devicetree growing or shrinking. + +The `u-boot.bin` image contains both pieces. While it is possible to locate the +devicetree within the image using the signature at the start of the file, this +is a bit messy. + +This is why `CONFIG_OF_SEPARATE` should always be used when building U-Boot. +The `CONFIG_OF_EMBED` option embeds the devicetree somewhere in the U-Boot ELF +image as rodata, meaning that it is hard to find it and it cannot increase in +size. + +When modifying the devicetree, the different cases to consider are as follows: + +- CONFIG_OF_SEPARATE + This is easy, described above. Just change, replace or rebuild the + devicetree so it suits your needs, then rerun binman or redo the `cat` + operation to join `u-boot-nodtb.bin` and the new `u-boot.dtb` + +- CONFIG_OF_EMBD + This is tricky, since the devicetree cannot easily be located. If the EFL + file is available, then the _dtb_dt_begin and __dtb_dt_end symbols can be + examined to find it. While it is possible to contract the file, it is not + possible to expand the file since that would involve re-linking + +- CONFIG_OF_PRIOR_STAGE + In this case the devicetree must be modified in the project which provides + it, as described below + +- CONFIG_OF_BOARD + This is a board-specific situation, so needs to be considered on a + case-by-case base. The devicetree must be modified so that the correct + one is provided to U-Boot. How this is done depends entirely on the + implementation of this option for the board. It might require injecting the + changes into a different project somehow using tooling available there, or + it might involve merging an overlay file at runtime to obtain the desired + result. + + +Devicetree in another project
doc/develop/package/devicetree.rst line 159
Quoted 10 lines
doc/develop/package/devicetree.rst new file +10
-0+----------------------------- + +In some cases U-Boot receive its devicetree at runtime from a program that calls +it. For example ARM's Trusted Firmware A (`TF-A`_) may have a devicetree that it +passes to U-Boot. This overrides any devicetree build by U-Boot. When packaging +the firmware, the U-Boot devicetree may in fact be left out if it can be +guaranteed that it will receive one from another project. + +In this case, the devicetree in the other project must track U-Boot's use of +device tree. It must provide a way to add configuration and other information to
U-Boot does not rule the world. So never ever is this going to happen. It is the other way round. U-Boot must consume what the prior bootstage delivers. If U-Boot needs extra nodes it has to provide these on its own.
Please, remove this assumption from the document.
doc/develop/package/devicetree.rst line 165
Quoted 6 lines
doc/develop/package/devicetree.rst new file +6
-0+the devicetree for use by U-Boot, such as the /config node. Note that the +U-Boot in-tree devicetree must be sufficient to build and boot, so this is not a +way to bypass that requirement. + +If binman is used, the in-tree U-Boot devicetree must contain the binman +definition so that a valid image can be build.
No clue what an in-tree tree might be. Please, avoid such confusing language.
doc/develop/package/devicetree.rst line 167
Quoted 2 lines
doc/develop/package/devicetree.rst new file +2
-0+ +If verified boot is used, the project must provide a way to inject a public key,
%s/the project/U-Boot/
Quoted 5 lines
doc/develop/package/devicetree.rst new file +5
-0+certificate or other material into the U-Boot devicetree so that it is available +to U-Boot at runtime. See `Signing with U-Boot devicetree`_. This may be +through tooling in the project itself or by making use of U-Boot's tooling. + +
doc/develop/package/devicetree.rst line 182
Quoted 10 lines
doc/develop/package/devicetree.rst new file +10
-0+Devicetree generated on-the-fly in another project +-------------------------------------------------- + +In some rare cases, another project may wish to create a devicetree for U-Boot +entirely on-the-fly, then pass it to U-Boot at runtime. The only known example +of this at the time of writing (2021) is qemu, for ARM (`QEMU ARM`_) and +RISC-V (`QEMU RISC-V`_). + +In this case, the devicetree in the other project must track U-Boot's use of +device tree, so that it remains compatible. If a particular version of the
Why? U-Boot must support its internal needs itself!
Don't try to force a bad U-Boot design on other projects.
Please, come up with a concept that makes sense.
Best regards
Heinrich
Quoted 143 lines
doc/develop/package/devicetree.rst new file +133
-0+project is needed for a particular version of U-Boot, that must be documented +in both projects. + +Further, it must provide a way to add configuration and other information to +the devicetree for use by U-Boot, such as the `/config` node. Note that the +U-Boot in-tree devicetree must be sufficient to build and boot, so this is not a +way to bypass that requirement. + +More specifically, tooling or command-line arguments must provide a way to +add a `/config` node or items within that node, so that U-Boot can receive a +suitable configuration. These options can then be used as part of the build +process, which puts the firmware image together. For binman, a way must be +provided to add the binman definition into the devicetree in the same way. + +One way to do this is to allow a .dtsi file to be merged in with the generated +devicetree. + + +Passing the devicetree through to Linux +--------------------------------------- + +Ideally U-Boot and Linux use the same devicetree source, even though it is +hosted in separate projects. U-Boot adds some extra pieces, such as the +`config/` node and tags like `u-boot,dm-spl`. Linux adds some extra pieces, such +as `linux,default-trigger` and `linux,code`. This should not interfere with +each other. + +In principle it is possible for U-Boot's control devicetree to be passed to +Linux. This is, after all, one of the goals of devicetree and the original +Open Firmware project, to have the firmware provide the hardware description to +the Operating System. + +For boards where this approach is used, care must be taken. U-Boot typically +needs to 'fix up' the devicetree before passing it to Linux, e.g. to add +information about the memory map, about which serial console is used, provide +the root hash for dm-verify or select whether the console should be silenced for +a faster boot. + +Fix-ups involve modifying the devicetree. If the control devicetree is used, +that means the control devicetree could be modified, while U-Boot is using it. +Removing a device and reinserting it can cause problems if the devicetree offset +has changed, for example, since the device will be unable to locates its +devicetree properties at the expected devicetree offset, which is a fixed +integer. + +To deal with this, it is recommended to employ one or more of the following +approaches: + +- Make a copy of the devicetree and 'fix up' the copy, leaving the control + devicetree alone +- Enable `CONFIG_OF_LIVE` so that U-Boot makes its own copy of the devicetree + during relocation; fixups then happen on the original flat tree +- Ensure that fix-ups happen after all loading has happened and U-Boot has + completed image verification + +In practice,the last point is typically observed, since boot_prep_linux() is +called just before jumping to Linux, long after signature verification, for +example. But it is important to make sure that this line is not blurred, +particularly if untrusted user data in involved. + + +Devicetree use cases that must be supported +------------------------------------------- + +Regardless of how the devicetree is provided to U-Boot at runtime, various +U-Boot features must be fully supported. This section describes some of these +features and the implications for other projects. + +If U-Boot uses its own in-tree devicetree these features are supported +automatically. + + +Signing with U-Boot devicetree +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +U-Boot supports signing a payload so that it can be verified to have been +created by a party owning a private key. This is called verified boot in U-Boot +(see doc/uImage.FIT/verified-boot.txt). + +Typically this works by creating a FIT and then running the `mkimage` tool to +add signatures for particular images. As part of this process, `mkimage` writes +a public key to the U-Boot devicetree, although this can be done separately. + +As with all configuration information, if another project is providing the +devicetree to U-Boot, it must provide a way to add this public key into the +devicetree it passes to U-Boot. This could be via a tooling option, making use +of `mkimage`, or alowing a .dtsi file to be merged in with what is generated in +the other project. + + +Providing the binman image definition +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +In complex systems U-Boot must locate and make use of other firmware components, +such as images for the user interface, files containing peripheral firmware, +multiple copies of U-Boot for use with A/B boot, etc. U-Boot uses +:doc:`Binman <binman>` as a standard way of putting an image together. + +Typically this works by running binman with the devicetree as an input, to +create the file image. Binman then outputs an updated devicetree which is +packed in the firmware image, so U-Boot can access the binman definition and +locate all the components. + +As with all configuration information, if another project is providing the +devicetree to U-Boot, it must provide a way to add this binman definition into +the devicetree it passes to U-Boot. This could be via a tooling option, making +use of `binman`, or alowing a .dtsi file to be merged in with what is generated +in the other project. + + +Protecting the devicetree +------------------------- + +U-Boot relies heavily on devicetree for correct operation. A corrupt or invalid +device can cause U-Boot to fail to start, behave incorrectly, crash (e.g. if +`CONFIG_OF_LIBFDT_ASSUME_MASK` is adjusted, or fail to boot an Operating System. +Within U-Boot, the devicetree is as important as any other part of the source +code. At ruuntime, the devicetree can be considered to be structured rodata. + +With secure systems, care must be taken that the devicetree is valid: + +- If the code / rodata has a hash or signature, the devicetree should also, if + they are packaged separately. +- If the code / rodata is write-protected when running, the devicetree should be + also. Note that U-Boot relocates its code and devicetree, so this is not as + simple as it sounds. U-Boot must write-protect these items after relocating. + + +.. _rpi_patch: https://patchwork.ozlabs.org/project/uboot/patch/[email protected]/ +.. _bcm_patch: https://patchwork.ozlabs.org/project/uboot/patch/16fc0901f4521d3c399eac950c52a634b2f9473b.1528485916.git.fitzsim@fitzsim.org/ +.. _`TF-A`: https://www.trustedfirmware.org/projects/tf-a +.. _`QEMU ARM`: https://github.com/qemu/qemu/blob/master/hw/arm/virt.c +.. _`QEMU RISC-V`: https://github.com/qemu/qemu/blob/master/hw/riscv/virt.cdoc/develop/package/index.rst +1
-0@@ -17,3 +17,4 @@ SPI flash. :maxdepth: 2 binman + devicetree
Quoted 197 lines · Heinrich Schuchardt
Quoted 181 lines · Simon Glass
At present some of the ideas and techniques behind devicetree in U-Boot are assumed, implied or unsaid. Add some documentation to cover how devicetree is build, how it can be modified and the rules about using the various
CONFIG_OF_... options.Signed-off-by Simon Glass <[email protected]>---
doc/develop/index.rst | 1 + doc/develop/package/devicetree.rst | 315 +++++++++++++++++++++++++++++ doc/develop/package/index.rst | 1 + 3 files changed, 317 insertions(+)create mode 100644
doc/develop/package/devicetree.rstdoc/develop/index.rst +1
-0@@ -36,6 +36,7 @@ Packaging :maxdepth: 1 package/index + package/devicetree Testing -------doc/develop/package/devicetree.rst new file +149
-0@@ -0,0 +1,315 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +Updating the devicetree +======================= + +U-Boot uses devicetree for runtime configuration and storing required blobs or +any other information it needs to operate. It is possible to update the +devicetree separately from actually building U-Boot. This provides a good degree +of control and flexibility for firmware that uses U-Boot in conjunction with +other project. + +There are many reasons why it is useful to modify the devicetree after building +it: + +- Configuration can be changed, e.g. which UART to use +- A serial number can be added +- Public keys can be added to allow image verification +- Console output can be changed (e.g. to select serial or vidconsole) + +This section describes how to work with devicetree to accomplish your goals. + +See also :doc:`../devicetree/control` for a basic summary of the available +features. + + +Devicetree source +----------------- + +Every board in U-Boot must include a devicetree sufficient to build and boot +that board on suitable hardware (or emulation). This is specified using the +`CONFIG DEFAULT_DEVICE_TREE` option. + + +Current situation (August 2021) +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +As an aside, at present U-Boot allows `CONFIG_DEFAULT_DEVICE_TREE` to be empty, +e.g. if `CONFIG_OF_BOARD` or `CONFIG_OF_PRIOR_STAGE` are used. This has +unfortunately created an enormous amount of confusion and some wasted effort. +This was not intended and this bug will be fixed soon. Specifically: + +- `CONFIG_OF_BOARD` was added in rpi_patch_ for Raspberry Pi, which does have + an in-tree devicetree, but this feature has since been used for boards that + don't +- `CONFIG_OF_PRIOR_STAGE` was added in bcm_patch_ as part of a larger Broadcom + change with a tag indicating it only affected one board, so the change in + behaviour was not noticed at the time. It has since been used by RISC-V qemu + boards. + +Once this bug is fixed, CONFIG_OF_BOARD and CONFIG_OF_PRIOR_STAGE will override +(at runtime) the devicetree suppled with U-Boot, but will otherwise use +CONFIG_OF_SEPARATE for the in-tree build. So these two will become options, +moving out of the 'choice' in `dts/Kconfig` + +Offending boards are: + +- bcm7260 +- bcm7445 +- qemu_arm64 +- qemu_arm +- qemu-ppce500 +- qemu-riscv32 +- qemu-riscv32_smode +- qemu-riscv64 +- qemu-riscv64_smode + +All of these need to have a devicetree added in-tree. This is targeted to be +fixed in the 2022.01 release. + + +Building the devicetree +----------------------- + +U-Boot automatically builds the devicetree for a board, from the +`arch/<arch>/dts` directory. The Makefile in those directories has rules for +building devicetree files. It is preferable to avoid target-specific rules in +those files: i.e. all boards for a particular SoC should be built at once, +where practical. Apart from simplifying the Makefile, this helps to efficiently +(and immediately) ensure that changes in one board's DT do not break others that +are related. Building devicetrees is fast, so performance is seldom a concern +here. + + +Overriding the default devicetree +--------------------------------- + +When building U-Boot, the `DEVICE_TREE` environment variable allows the +default devicetree file to be overridden at build time. This can be useful if +modifications have to be made to the in-tree devicetree file, for the benefit +of a downstream build system. Note that the in-tree devicetree must be +sufficient to build and boot, so this is not a way to bypass that requirement. + + +Modifying the devicetree after building +--------------------------------------- + +While it is generally painful and hacky to modify the code or rodata of a +program after it is built, in many cases it is useul to do so, e.g. to add +configuration information like serial numbers, enabling/disabling features, etc. + +Devicetree provides a very nice solution to these problems since it is +structured data and it is relatively easy to change it, even in binary form +(see fdtput). + +U-Boot takes care that the devicetree is easily accessible after the build +process. In fact it is placed in a separate file called `u-boot.dtb`. If the +build system wants to modify or replace that file, it can do so. Then all that +is needed is to run `binman update` to update the file inside the image. If +binman is not used, then `u-boot-nodtb.bin` and the new `u-boot.dtb` can simply +be concatenated to achieve the desired result. U-Boot happily copes with the +devicetree growing or shrinking. + +The `u-boot.bin` image contains both pieces. While it is possible to locate the +devicetree within the image using the signature at the start of the file, this +is a bit messy. + +This is why `CONFIG_OF_SEPARATE` should always be used when building U-Boot. +The `CONFIG_OF_EMBED` option embeds the devicetree somewhere in the U-Boot ELF +image as rodata, meaning that it is hard to find it and it cannot increase in +size. + +When modifying the devicetree, the different cases to consider are as follows: + +- CONFIG_OF_SEPARATE + This is easy, described above. Just change, replace or rebuild the + devicetree so it suits your needs, then rerun binman or redo the `cat` + operation to join `u-boot-nodtb.bin` and the new `u-boot.dtb` + +- CONFIG_OF_EMBD + This is tricky, since the devicetree cannot easily be located. If the EFL + file is available, then the _dtb_dt_begin and __dtb_dt_end symbols can be + examined to find it. While it is possible to contract the file, it is not + possible to expand the file since that would involve re-linking + +- CONFIG_OF_PRIOR_STAGE + In this case the devicetree must be modified in the project which provides + it, as described below + +- CONFIG_OF_BOARD + This is a board-specific situation, so needs to be considered on a + case-by-case base. The devicetree must be modified so that the correct + one is provided to U-Boot. How this is done depends entirely on the + implementation of this option for the board. It might require injecting the + changes into a different project somehow using tooling available there, or + it might involve merging an overlay file at runtime to obtain the desired + result. + + +Devicetree in another projectdoc/develop/package/devicetree.rst line 159
Quoted 10 lines
doc/develop/package/devicetree.rst new file +10
-0+----------------------------- + +In some cases U-Boot receive its devicetree at runtime from a program that calls +it. For example ARM's Trusted Firmware A (`TF-A`_) may have a devicetree that it +passes to U-Boot. This overrides any devicetree build by U-Boot. When packaging +the firmware, the U-Boot devicetree may in fact be left out if it can be +guaranteed that it will receive one from another project. + +In this case, the devicetree in the other project must track U-Boot's use of +device tree. It must provide a way to add configuration and other information toU-Boot does not rule the world. So never ever is this going to happen. It is the other way round. U-Boot must consume what the prior bootstage delivers. If U-Boot needs extra nodes it has to provide these on its own.
Quoted 1 line
Please, remove this assumption from the document.
We need to figure out which compatibles we need to push upstream, and which we need to see if we can solve another way.
Quoted 9 lines
doc/develop/package/devicetree.rst line 165
Quoted 6 lines
doc/develop/package/devicetree.rst new file +6
-0+the devicetree for use by U-Boot, such as the /config node. Note that the +U-Boot in-tree devicetree must be sufficient to build and boot, so this is not a +way to bypass that requirement. + +If binman is used, the in-tree U-Boot devicetree must contain the binman +definition so that a valid image can be build.No clue what an in-tree tree might be. Please, avoid such confusing language.
Would "source tree devicetree" be less confusing? Or can you suggest an alternative?
Quoted 6 lines
doc/develop/package/devicetree.rst line 167
Quoted 3 lines
doc/develop/package/devicetree.rst new file +2
-0+ +If verified boot is used, the project must provide a way to inject a public key,%s/the project/U-Boot/
Quoted 7 lines
doc/develop/package/devicetree.rst line 174
Quoted 7 lines
doc/develop/package/devicetree.rst new file +7
-0+certificate or other material into the U-Boot devicetree so that it is available +to U-Boot at runtime. See `Signing with U-Boot devicetree`_. This may be +through tooling in the project itself or by making use of U-Boot's tooling. + + +Devicetree generated on-the-fly in another project +--------------------------------------------------
I think this is a confusing topic, and gets things a bit backwards.
Quoted 5 lines
doc/develop/package/devicetree.rst line 179
Quoted 5 lines
doc/develop/package/devicetree.rst new file +5
-0+ +In some rare cases, another project may wish to create a devicetree for U-Boot +entirely on-the-fly, then pass it to U-Boot at runtime. The only known example +of this at the time of writing (2021) is qemu, for ARM (`QEMU ARM`_) and +RISC-V (`QEMU RISC-V`_).
What's the difference between QEMU and hardware that ships with a device tree stored in flash? In both cases, we need to have the device tree that's provided be the device tree that works. Like I was just raising in another thread, there are not multiple device trees for a given device, there is the device tree and it works for everyone that needs to consume a device tree.
Quoted 8 lines
doc/develop/package/devicetree.rst line 181
Quoted 2 lines
doc/develop/package/devicetree.rst new file +2
-0+In this case, the devicetree in the other project must track U-Boot's use of +device tree, so that it remains compatible. If a particular version of theWhy? U-Boot must support its internal needs itself!
Don't try to force a bad U-Boot design on other projects.
Please, come up with a concept that makes sense.
This is the same situation as above, where we need to see about pushing some changes upstream perhaps.
Signature · 1 line
Tom
Quoted 250 lines · Tom Rini
Quoted 197 lines · Heinrich Schuchardt
Quoted 181 lines · Simon Glass
At present some of the ideas and techniques behind devicetree in U-Boot are assumed, implied or unsaid. Add some documentation to cover how devicetree is build, how it can be modified and the rules about using the various
CONFIG_OF_... options.Signed-off-by Simon Glass <[email protected]>---
doc/develop/index.rst | 1 + doc/develop/package/devicetree.rst | 315 +++++++++++++++++++++++++++++ doc/develop/package/index.rst | 1 + 3 files changed, 317 insertions(+)create mode 100644
doc/develop/package/devicetree.rstdoc/develop/index.rst +1
-0@@ -36,6 +36,7 @@ Packaging :maxdepth: 1 package/index + package/devicetree Testing -------doc/develop/package/devicetree.rst new file +149
-0@@ -0,0 +1,315 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +Updating the devicetree +======================= + +U-Boot uses devicetree for runtime configuration and storing required blobs or +any other information it needs to operate. It is possible to update the +devicetree separately from actually building U-Boot. This provides a good degree +of control and flexibility for firmware that uses U-Boot in conjunction with +other project. + +There are many reasons why it is useful to modify the devicetree after building +it: + +- Configuration can be changed, e.g. which UART to use +- A serial number can be added +- Public keys can be added to allow image verification +- Console output can be changed (e.g. to select serial or vidconsole) + +This section describes how to work with devicetree to accomplish your goals. + +See also :doc:`../devicetree/control` for a basic summary of the available +features. + + +Devicetree source +----------------- + +Every board in U-Boot must include a devicetree sufficient to build and boot +that board on suitable hardware (or emulation). This is specified using the +`CONFIG DEFAULT_DEVICE_TREE` option. + + +Current situation (August 2021) +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +As an aside, at present U-Boot allows `CONFIG_DEFAULT_DEVICE_TREE` to be empty, +e.g. if `CONFIG_OF_BOARD` or `CONFIG_OF_PRIOR_STAGE` are used. This has +unfortunately created an enormous amount of confusion and some wasted effort. +This was not intended and this bug will be fixed soon. Specifically: + +- `CONFIG_OF_BOARD` was added in rpi_patch_ for Raspberry Pi, which does have + an in-tree devicetree, but this feature has since been used for boards that + don't +- `CONFIG_OF_PRIOR_STAGE` was added in bcm_patch_ as part of a larger Broadcom + change with a tag indicating it only affected one board, so the change in + behaviour was not noticed at the time. It has since been used by RISC-V qemu + boards. + +Once this bug is fixed, CONFIG_OF_BOARD and CONFIG_OF_PRIOR_STAGE will override +(at runtime) the devicetree suppled with U-Boot, but will otherwise use +CONFIG_OF_SEPARATE for the in-tree build. So these two will become options, +moving out of the 'choice' in `dts/Kconfig` + +Offending boards are: + +- bcm7260 +- bcm7445 +- qemu_arm64 +- qemu_arm +- qemu-ppce500 +- qemu-riscv32 +- qemu-riscv32_smode +- qemu-riscv64 +- qemu-riscv64_smode + +All of these need to have a devicetree added in-tree. This is targeted to be +fixed in the 2022.01 release. + + +Building the devicetree +----------------------- + +U-Boot automatically builds the devicetree for a board, from the +`arch/<arch>/dts` directory. The Makefile in those directories has rules for +building devicetree files. It is preferable to avoid target-specific rules in +those files: i.e. all boards for a particular SoC should be built at once, +where practical. Apart from simplifying the Makefile, this helps to efficiently +(and immediately) ensure that changes in one board's DT do not break others that +are related. Building devicetrees is fast, so performance is seldom a concern +here. + + +Overriding the default devicetree +--------------------------------- + +When building U-Boot, the `DEVICE_TREE` environment variable allows the +default devicetree file to be overridden at build time. This can be useful if +modifications have to be made to the in-tree devicetree file, for the benefit +of a downstream build system. Note that the in-tree devicetree must be +sufficient to build and boot, so this is not a way to bypass that requirement. + + +Modifying the devicetree after building +--------------------------------------- + +While it is generally painful and hacky to modify the code or rodata of a +program after it is built, in many cases it is useul to do so, e.g. to add +configuration information like serial numbers, enabling/disabling features, etc. + +Devicetree provides a very nice solution to these problems since it is +structured data and it is relatively easy to change it, even in binary form +(see fdtput). + +U-Boot takes care that the devicetree is easily accessible after the build +process. In fact it is placed in a separate file called `u-boot.dtb`. If the +build system wants to modify or replace that file, it can do so. Then all that +is needed is to run `binman update` to update the file inside the image. If +binman is not used, then `u-boot-nodtb.bin` and the new `u-boot.dtb` can simply +be concatenated to achieve the desired result. U-Boot happily copes with the +devicetree growing or shrinking. + +The `u-boot.bin` image contains both pieces. While it is possible to locate the +devicetree within the image using the signature at the start of the file, this +is a bit messy. + +This is why `CONFIG_OF_SEPARATE` should always be used when building U-Boot. +The `CONFIG_OF_EMBED` option embeds the devicetree somewhere in the U-Boot ELF +image as rodata, meaning that it is hard to find it and it cannot increase in +size. + +When modifying the devicetree, the different cases to consider are as follows: + +- CONFIG_OF_SEPARATE + This is easy, described above. Just change, replace or rebuild the + devicetree so it suits your needs, then rerun binman or redo the `cat` + operation to join `u-boot-nodtb.bin` and the new `u-boot.dtb` + +- CONFIG_OF_EMBD + This is tricky, since the devicetree cannot easily be located. If the EFL + file is available, then the _dtb_dt_begin and __dtb_dt_end symbols can be + examined to find it. While it is possible to contract the file, it is not + possible to expand the file since that would involve re-linking + +- CONFIG_OF_PRIOR_STAGE + In this case the devicetree must be modified in the project which provides + it, as described below + +- CONFIG_OF_BOARD + This is a board-specific situation, so needs to be considered on a + case-by-case base. The devicetree must be modified so that the correct + one is provided to U-Boot. How this is done depends entirely on the + implementation of this option for the board. It might require injecting the + changes into a different project somehow using tooling available there, or + it might involve merging an overlay file at runtime to obtain the desired + result. + + +Devicetree in another projectdoc/develop/package/devicetree.rst line 159
Quoted 10 lines
doc/develop/package/devicetree.rst new file +10
-0+----------------------------- + +In some cases U-Boot receive its devicetree at runtime from a program that calls +it. For example ARM's Trusted Firmware A (`TF-A`_) may have a devicetree that it +passes to U-Boot. This overrides any devicetree build by U-Boot. When packaging +the firmware, the U-Boot devicetree may in fact be left out if it can be +guaranteed that it will receive one from another project. + +In this case, the devicetree in the other project must track U-Boot's use of +device tree. It must provide a way to add configuration and other information toU-Boot does not rule the world. So never ever is this going to happen. It is the other way round. U-Boot must consume what the prior bootstage delivers. If U-Boot needs extra nodes it has to provide these on its own.
Quoted 1 line
Please, remove this assumption from the document.
We need to figure out which compatibles we need to push upstream, and which we need to see if we can solve another way.
Quoted 9 lines
doc/develop/package/devicetree.rst line 165
Quoted 6 lines
doc/develop/package/devicetree.rst new file +6
-0+the devicetree for use by U-Boot, such as the /config node. Note that the +U-Boot in-tree devicetree must be sufficient to build and boot, so this is not a +way to bypass that requirement. + +If binman is used, the in-tree U-Boot devicetree must contain the binman +definition so that a valid image can be build.No clue what an in-tree tree might be. Please, avoid such confusing language.
Would "source tree devicetree" be less confusing? Or can you suggest an alternative?
Quoted 6 lines
doc/develop/package/devicetree.rst line 167
Quoted 3 lines
doc/develop/package/devicetree.rst new file +2
-0+ +If verified boot is used, the project must provide a way to inject a public key,%s/the project/U-Boot/
Quoted 7 lines
doc/develop/package/devicetree.rst line 174
Quoted 7 lines
doc/develop/package/devicetree.rst new file +7
-0+certificate or other material into the U-Boot devicetree so that it is available +to U-Boot at runtime. See `Signing with U-Boot devicetree`_. This may be +through tooling in the project itself or by making use of U-Boot's tooling. + + +Devicetree generated on-the-fly in another project +--------------------------------------------------I think this is a confusing topic, and gets things a bit backwards.
Quoted 5 lines
doc/develop/package/devicetree.rst line 179
Quoted 5 lines
doc/develop/package/devicetree.rst new file +5
-0+ +In some rare cases, another project may wish to create a devicetree for U-Boot +entirely on-the-fly, then pass it to U-Boot at runtime. The only known example +of this at the time of writing (2021) is qemu, for ARM (`QEMU ARM`_) and +RISC-V (`QEMU RISC-V`_).What's the difference between QEMU and hardware that ships with a device tree stored in flash? In both cases, we need to have the device tree that's provided be the device tree that works. Like I was just raising in another thread, there are not multiple device trees for a given device, there is the device tree and it works for everyone that needs to consume a device tree.
Quoted 5 lines
doc/develop/package/devicetree.rst line 181
Quoted 2 lines
doc/develop/package/devicetree.rst new file +2
-0+In this case, the devicetree in the other project must track U-Boot's use of +device tree, so that it remains compatible. If a particular version of theWhy? U-Boot must support its internal needs itself!
Quoted 7 lines
Quoted 3 lines
Don't try to force a bad U-Boot design on other projects.
Please, come up with a concept that makes sense.
This is the same situation as above, where we need to see about pushing some changes upstream perhaps.
In U-Boot we currently have a lot of device-tree nodes that are irrelevant for anything but U-Boot, e.g. all those nodes marked as compatible to "u-boot,*". It does not make sense to push these upstream.
So if a prior bootstage provides a devicetree, we need a separate devicetree in U-Boot.
We can copy the incoming devicetree to a private copy and amend all our U-Boot specific stuff. Then let's use this private copy for $fdt_control_addr and bringing up U-Boot while keeping the original incoming devicetree as $fdt_addr so that we can pass it to the next boot stage.
Best regards
Heinrich
Quoted 263 lines · Heinrich Schuchardt
Quoted 250 lines · Tom Rini
Quoted 197 lines · Heinrich Schuchardt
Quoted 181 lines · Simon Glass
At present some of the ideas and techniques behind devicetree in U-Boot are assumed, implied or unsaid. Add some documentation to cover how devicetree is build, how it can be modified and the rules about using the various
CONFIG_OF_... options.Signed-off-by Simon Glass <[email protected]>---
doc/develop/index.rst | 1 + doc/develop/package/devicetree.rst | 315 +++++++++++++++++++++++++++++ doc/develop/package/index.rst | 1 + 3 files changed, 317 insertions(+)create mode 100644
doc/develop/package/devicetree.rstdoc/develop/index.rst +1
-0@@ -36,6 +36,7 @@ Packaging :maxdepth: 1 package/index + package/devicetree Testing -------doc/develop/package/devicetree.rst new file +149
-0@@ -0,0 +1,315 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +Updating the devicetree +======================= + +U-Boot uses devicetree for runtime configuration and storing required blobs or +any other information it needs to operate. It is possible to update the +devicetree separately from actually building U-Boot. This provides a good degree +of control and flexibility for firmware that uses U-Boot in conjunction with +other project. + +There are many reasons why it is useful to modify the devicetree after building +it: + +- Configuration can be changed, e.g. which UART to use +- A serial number can be added +- Public keys can be added to allow image verification +- Console output can be changed (e.g. to select serial or vidconsole) + +This section describes how to work with devicetree to accomplish your goals. + +See also :doc:`../devicetree/control` for a basic summary of the available +features. + + +Devicetree source +----------------- + +Every board in U-Boot must include a devicetree sufficient to build and boot +that board on suitable hardware (or emulation). This is specified using the +`CONFIG DEFAULT_DEVICE_TREE` option. + + +Current situation (August 2021) +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +As an aside, at present U-Boot allows `CONFIG_DEFAULT_DEVICE_TREE` to be empty, +e.g. if `CONFIG_OF_BOARD` or `CONFIG_OF_PRIOR_STAGE` are used. This has +unfortunately created an enormous amount of confusion and some wasted effort. +This was not intended and this bug will be fixed soon. Specifically: + +- `CONFIG_OF_BOARD` was added in rpi_patch_ for Raspberry Pi, which does have + an in-tree devicetree, but this feature has since been used for boards that + don't +- `CONFIG_OF_PRIOR_STAGE` was added in bcm_patch_ as part of a larger Broadcom + change with a tag indicating it only affected one board, so the change in + behaviour was not noticed at the time. It has since been used by RISC-V qemu + boards. + +Once this bug is fixed, CONFIG_OF_BOARD and CONFIG_OF_PRIOR_STAGE will override +(at runtime) the devicetree suppled with U-Boot, but will otherwise use +CONFIG_OF_SEPARATE for the in-tree build. So these two will become options, +moving out of the 'choice' in `dts/Kconfig` + +Offending boards are: + +- bcm7260 +- bcm7445 +- qemu_arm64 +- qemu_arm +- qemu-ppce500 +- qemu-riscv32 +- qemu-riscv32_smode +- qemu-riscv64 +- qemu-riscv64_smode + +All of these need to have a devicetree added in-tree. This is targeted to be +fixed in the 2022.01 release. + + +Building the devicetree +----------------------- + +U-Boot automatically builds the devicetree for a board, from the +`arch/<arch>/dts` directory. The Makefile in those directories has rules for +building devicetree files. It is preferable to avoid target-specific rules in +those files: i.e. all boards for a particular SoC should be built at once, +where practical. Apart from simplifying the Makefile, this helps to efficiently +(and immediately) ensure that changes in one board's DT do not break others that +are related. Building devicetrees is fast, so performance is seldom a concern +here. + + +Overriding the default devicetree +--------------------------------- + +When building U-Boot, the `DEVICE_TREE` environment variable allows the +default devicetree file to be overridden at build time. This can be useful if +modifications have to be made to the in-tree devicetree file, for the benefit +of a downstream build system. Note that the in-tree devicetree must be +sufficient to build and boot, so this is not a way to bypass that requirement. + + +Modifying the devicetree after building +--------------------------------------- + +While it is generally painful and hacky to modify the code or rodata of a +program after it is built, in many cases it is useul to do so, e.g. to add +configuration information like serial numbers, enabling/disabling features, etc. + +Devicetree provides a very nice solution to these problems since it is +structured data and it is relatively easy to change it, even in binary form +(see fdtput). + +U-Boot takes care that the devicetree is easily accessible after the build +process. In fact it is placed in a separate file called `u-boot.dtb`. If the +build system wants to modify or replace that file, it can do so. Then all that +is needed is to run `binman update` to update the file inside the image. If +binman is not used, then `u-boot-nodtb.bin` and the new `u-boot.dtb` can simply +be concatenated to achieve the desired result. U-Boot happily copes with the +devicetree growing or shrinking. + +The `u-boot.bin` image contains both pieces. While it is possible to locate the +devicetree within the image using the signature at the start of the file, this +is a bit messy. + +This is why `CONFIG_OF_SEPARATE` should always be used when building U-Boot. +The `CONFIG_OF_EMBED` option embeds the devicetree somewhere in the U-Boot ELF +image as rodata, meaning that it is hard to find it and it cannot increase in +size. + +When modifying the devicetree, the different cases to consider are as follows: + +- CONFIG_OF_SEPARATE + This is easy, described above. Just change, replace or rebuild the + devicetree so it suits your needs, then rerun binman or redo the `cat` + operation to join `u-boot-nodtb.bin` and the new `u-boot.dtb` + +- CONFIG_OF_EMBD + This is tricky, since the devicetree cannot easily be located. If the EFL + file is available, then the _dtb_dt_begin and __dtb_dt_end symbols can be + examined to find it. While it is possible to contract the file, it is not + possible to expand the file since that would involve re-linking + +- CONFIG_OF_PRIOR_STAGE + In this case the devicetree must be modified in the project which provides + it, as described below + +- CONFIG_OF_BOARD + This is a board-specific situation, so needs to be considered on a + case-by-case base. The devicetree must be modified so that the correct + one is provided to U-Boot. How this is done depends entirely on the + implementation of this option for the board. It might require injecting the + changes into a different project somehow using tooling available there, or + it might involve merging an overlay file at runtime to obtain the desired + result. + + +Devicetree in another projectdoc/develop/package/devicetree.rst line 159
Quoted 10 lines
doc/develop/package/devicetree.rst new file +10
-0+----------------------------- + +In some cases U-Boot receive its devicetree at runtime from a program that calls +it. For example ARM's Trusted Firmware A (`TF-A`_) may have a devicetree that it +passes to U-Boot. This overrides any devicetree build by U-Boot. When packaging +the firmware, the U-Boot devicetree may in fact be left out if it can be +guaranteed that it will receive one from another project. + +In this case, the devicetree in the other project must track U-Boot's use of +device tree. It must provide a way to add configuration and other information toU-Boot does not rule the world. So never ever is this going to happen. It is the other way round. U-Boot must consume what the prior bootstage delivers. If U-Boot needs extra nodes it has to provide these on its own.
Quoted 1 line
Please, remove this assumption from the document.
We need to figure out which compatibles we need to push upstream, and which we need to see if we can solve another way.
Quoted 9 lines
doc/develop/package/devicetree.rst line 165
Quoted 6 lines
doc/develop/package/devicetree.rst new file +6
-0+the devicetree for use by U-Boot, such as the /config node. Note that the +U-Boot in-tree devicetree must be sufficient to build and boot, so this is not a +way to bypass that requirement. + +If binman is used, the in-tree U-Boot devicetree must contain the binman +definition so that a valid image can be build.No clue what an in-tree tree might be. Please, avoid such confusing language.
Would "source tree devicetree" be less confusing? Or can you suggest an alternative?
Quoted 6 lines
doc/develop/package/devicetree.rst line 167
Quoted 3 lines
doc/develop/package/devicetree.rst new file +2
-0+ +If verified boot is used, the project must provide a way to inject a public key,%s/the project/U-Boot/
Quoted 7 lines
doc/develop/package/devicetree.rst line 174
Quoted 7 lines
doc/develop/package/devicetree.rst new file +7
-0+certificate or other material into the U-Boot devicetree so that it is available +to U-Boot at runtime. See `Signing with U-Boot devicetree`_. This may be +through tooling in the project itself or by making use of U-Boot's tooling. + + +Devicetree generated on-the-fly in another project +--------------------------------------------------I think this is a confusing topic, and gets things a bit backwards.
Quoted 5 lines
doc/develop/package/devicetree.rst line 179
Quoted 5 lines
doc/develop/package/devicetree.rst new file +5
-0+ +In some rare cases, another project may wish to create a devicetree for U-Boot +entirely on-the-fly, then pass it to U-Boot at runtime. The only known example +of this at the time of writing (2021) is qemu, for ARM (`QEMU ARM`_) and +RISC-V (`QEMU RISC-V`_).What's the difference between QEMU and hardware that ships with a device tree stored in flash? In both cases, we need to have the device tree that's provided be the device tree that works. Like I was just raising in another thread, there are not multiple device trees for a given device, there is the device tree and it works for everyone that needs to consume a device tree.
Quoted 5 lines
doc/develop/package/devicetree.rst line 181
Quoted 2 lines
doc/develop/package/devicetree.rst new file +2
-0+In this case, the devicetree in the other project must track U-Boot's use of +device tree, so that it remains compatible. If a particular version of theWhy? U-Boot must support its internal needs itself!
Quoted 7 lines
Quoted 3 lines
Don't try to force a bad U-Boot design on other projects.
Please, come up with a concept that makes sense.
This is the same situation as above, where we need to see about pushing some changes upstream perhaps.
In U-Boot we currently have a lot of device-tree nodes that are irrelevant for anything but U-Boot, e.g. all those nodes marked as compatible to "u-boot,*". It does not make sense to push these upstream.
Quoted 8 lines
So if a prior bootstage provides a devicetree, we need a separate devicetree in U-Boot.
We can copy the incoming devicetree to a private copy and amend all our U-Boot specific stuff. Then let's use this private copy for $fdt_control_addr and bringing up U-Boot while keeping the original incoming devicetree as $fdt_addr so that we can pass it to the next boot stage.
I'm not sure that's how this works? The "linux" vendor prefix is for Linux specific bindings and are expected to be present in the tree it receives, and not fixed up and added at runtime. But if you can proof of concept out what your idea, I suspect that would work to resolve a handful of problems all the same, so it would be good to see.
Signature · 1 line
Tom
Hi,
Quoted 275 lines · Tom Rini
Quoted 267 lines · Heinrich Schuchardt
Quoted 250 lines · Tom Rini
Quoted 197 lines · Heinrich Schuchardt
Quoted 181 lines · Simon Glass
At present some of the ideas and techniques behind devicetree in U-Boot are assumed, implied or unsaid. Add some documentation to cover how devicetree is build, how it can be modified and the rules about using the various
CONFIG_OF_... options.Signed-off-by Simon Glass <[email protected]>---
doc/develop/index.rst | 1 + doc/develop/package/devicetree.rst | 315 +++++++++++++++++++++++++++++ doc/develop/package/index.rst | 1 + 3 files changed, 317 insertions(+)create mode 100644
doc/develop/package/devicetree.rstdoc/develop/index.rst +1
-0@@ -36,6 +36,7 @@ Packaging :maxdepth: 1 package/index + package/devicetree Testing -------doc/develop/package/devicetree.rst new file +149
-0@@ -0,0 +1,315 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +Updating the devicetree +======================= + +U-Boot uses devicetree for runtime configuration and storing required blobs or +any other information it needs to operate. It is possible to update the +devicetree separately from actually building U-Boot. This provides a good degree +of control and flexibility for firmware that uses U-Boot in conjunction with +other project. + +There are many reasons why it is useful to modify the devicetree after building +it: + +- Configuration can be changed, e.g. which UART to use +- A serial number can be added +- Public keys can be added to allow image verification +- Console output can be changed (e.g. to select serial or vidconsole) + +This section describes how to work with devicetree to accomplish your goals. + +See also :doc:`../devicetree/control` for a basic summary of the available +features. + + +Devicetree source +----------------- + +Every board in U-Boot must include a devicetree sufficient to build and boot +that board on suitable hardware (or emulation). This is specified using the +`CONFIG DEFAULT_DEVICE_TREE` option. + + +Current situation (August 2021) +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +As an aside, at present U-Boot allows `CONFIG_DEFAULT_DEVICE_TREE` to be empty, +e.g. if `CONFIG_OF_BOARD` or `CONFIG_OF_PRIOR_STAGE` are used. This has +unfortunately created an enormous amount of confusion and some wasted effort. +This was not intended and this bug will be fixed soon. Specifically: + +- `CONFIG_OF_BOARD` was added in rpi_patch_ for Raspberry Pi, which does have + an in-tree devicetree, but this feature has since been used for boards that + don't +- `CONFIG_OF_PRIOR_STAGE` was added in bcm_patch_ as part of a larger Broadcom + change with a tag indicating it only affected one board, so the change in + behaviour was not noticed at the time. It has since been used by RISC-V qemu + boards. + +Once this bug is fixed, CONFIG_OF_BOARD and CONFIG_OF_PRIOR_STAGE will override +(at runtime) the devicetree suppled with U-Boot, but will otherwise use +CONFIG_OF_SEPARATE for the in-tree build. So these two will become options, +moving out of the 'choice' in `dts/Kconfig` + +Offending boards are: + +- bcm7260 +- bcm7445 +- qemu_arm64 +- qemu_arm +- qemu-ppce500 +- qemu-riscv32 +- qemu-riscv32_smode +- qemu-riscv64 +- qemu-riscv64_smode + +All of these need to have a devicetree added in-tree. This is targeted to be +fixed in the 2022.01 release. + + +Building the devicetree +----------------------- + +U-Boot automatically builds the devicetree for a board, from the +`arch/<arch>/dts` directory. The Makefile in those directories has rules for +building devicetree files. It is preferable to avoid target-specific rules in +those files: i.e. all boards for a particular SoC should be built at once, +where practical. Apart from simplifying the Makefile, this helps to efficiently +(and immediately) ensure that changes in one board's DT do not break others that +are related. Building devicetrees is fast, so performance is seldom a concern +here. + + +Overriding the default devicetree +--------------------------------- + +When building U-Boot, the `DEVICE_TREE` environment variable allows the +default devicetree file to be overridden at build time. This can be useful if +modifications have to be made to the in-tree devicetree file, for the benefit +of a downstream build system. Note that the in-tree devicetree must be +sufficient to build and boot, so this is not a way to bypass that requirement. + + +Modifying the devicetree after building +--------------------------------------- + +While it is generally painful and hacky to modify the code or rodata of a +program after it is built, in many cases it is useul to do so, e.g. to add +configuration information like serial numbers, enabling/disabling features, etc. + +Devicetree provides a very nice solution to these problems since it is +structured data and it is relatively easy to change it, even in binary form +(see fdtput). + +U-Boot takes care that the devicetree is easily accessible after the build +process. In fact it is placed in a separate file called `u-boot.dtb`. If the +build system wants to modify or replace that file, it can do so. Then all that +is needed is to run `binman update` to update the file inside the image. If +binman is not used, then `u-boot-nodtb.bin` and the new `u-boot.dtb` can simply +be concatenated to achieve the desired result. U-Boot happily copes with the +devicetree growing or shrinking. + +The `u-boot.bin` image contains both pieces. While it is possible to locate the +devicetree within the image using the signature at the start of the file, this +is a bit messy. + +This is why `CONFIG_OF_SEPARATE` should always be used when building U-Boot. +The `CONFIG_OF_EMBED` option embeds the devicetree somewhere in the U-Boot ELF +image as rodata, meaning that it is hard to find it and it cannot increase in +size. + +When modifying the devicetree, the different cases to consider are as follows: + +- CONFIG_OF_SEPARATE + This is easy, described above. Just change, replace or rebuild the + devicetree so it suits your needs, then rerun binman or redo the `cat` + operation to join `u-boot-nodtb.bin` and the new `u-boot.dtb` + +- CONFIG_OF_EMBD + This is tricky, since the devicetree cannot easily be located. If the EFL + file is available, then the _dtb_dt_begin and __dtb_dt_end symbols can be + examined to find it. While it is possible to contract the file, it is not + possible to expand the file since that would involve re-linking + +- CONFIG_OF_PRIOR_STAGE + In this case the devicetree must be modified in the project which provides + it, as described below + +- CONFIG_OF_BOARD + This is a board-specific situation, so needs to be considered on a + case-by-case base. The devicetree must be modified so that the correct + one is provided to U-Boot. How this is done depends entirely on the + implementation of this option for the board. It might require injecting the + changes into a different project somehow using tooling available there, or + it might involve merging an overlay file at runtime to obtain the desired + result. + + +Devicetree in another projectdoc/develop/package/devicetree.rst line 159
Quoted 10 lines
doc/develop/package/devicetree.rst new file +10
-0+----------------------------- + +In some cases U-Boot receive its devicetree at runtime from a program that calls +it. For example ARM's Trusted Firmware A (`TF-A`_) may have a devicetree that it +passes to U-Boot. This overrides any devicetree build by U-Boot. When packaging +the firmware, the U-Boot devicetree may in fact be left out if it can be +guaranteed that it will receive one from another project. + +In this case, the devicetree in the other project must track U-Boot's use of +device tree. It must provide a way to add configuration and other information toU-Boot does not rule the world. So never ever is this going to happen. It is the other way round. U-Boot must consume what the prior bootstage delivers. If U-Boot needs extra nodes it has to provide these on its own.
Quoted 1 line
Please, remove this assumption from the document.
We need to figure out which compatibles we need to push upstream, and which we need to see if we can solve another way.
Quoted 9 lines
doc/develop/package/devicetree.rst line 165
Quoted 6 lines
doc/develop/package/devicetree.rst new file +6
-0+the devicetree for use by U-Boot, such as the /config node. Note that the +U-Boot in-tree devicetree must be sufficient to build and boot, so this is not a +way to bypass that requirement. + +If binman is used, the in-tree U-Boot devicetree must contain the binman +definition so that a valid image can be build.No clue what an in-tree tree might be. Please, avoid such confusing language.
Would "source tree devicetree" be less confusing? Or can you suggest an alternative?
Quoted 6 lines
doc/develop/package/devicetree.rst line 167
Quoted 3 lines
doc/develop/package/devicetree.rst new file +2
-0+ +If verified boot is used, the project must provide a way to inject a public key,%s/the project/U-Boot/
Quoted 7 lines
doc/develop/package/devicetree.rst line 174
Quoted 7 lines
doc/develop/package/devicetree.rst new file +7
-0+certificate or other material into the U-Boot devicetree so that it is available +to U-Boot at runtime. See `Signing with U-Boot devicetree`_. This may be +through tooling in the project itself or by making use of U-Boot's tooling. + + +Devicetree generated on-the-fly in another project +--------------------------------------------------I think this is a confusing topic, and gets things a bit backwards.
Quoted 5 lines
doc/develop/package/devicetree.rst line 179
Quoted 5 lines
doc/develop/package/devicetree.rst new file +5
-0+ +In some rare cases, another project may wish to create a devicetree for U-Boot +entirely on-the-fly, then pass it to U-Boot at runtime. The only known example +of this at the time of writing (2021) is qemu, for ARM (`QEMU ARM`_) and +RISC-V (`QEMU RISC-V`_).What's the difference between QEMU and hardware that ships with a device tree stored in flash? In both cases, we need to have the device tree that's provided be the device tree that works. Like I was just raising in another thread, there are not multiple device trees for a given device, there is the device tree and it works for everyone that needs to consume a device tree.
Quoted 5 lines
doc/develop/package/devicetree.rst line 181
Quoted 2 lines
doc/develop/package/devicetree.rst new file +2
-0+In this case, the devicetree in the other project must track U-Boot's use of +device tree, so that it remains compatible. If a particular version of theWhy? U-Boot must support its internal needs itself!
Quoted 7 lines
Quoted 3 lines
Don't try to force a bad U-Boot design on other projects.
Please, come up with a concept that makes sense.
This is the same situation as above, where we need to see about pushing some changes upstream perhaps.
In U-Boot we currently have a lot of device-tree nodes that are irrelevant for anything but U-Boot, e.g. all those nodes marked as compatible to "u-boot,*". It does not make sense to push these upstream.
So if a prior bootstage provides a devicetree, we need a separate devicetree in U-Boot.
Quoted 5 lines
We can copy the incoming devicetree to a private copy and amend all our U-Boot specific stuff. Then let's use this private copy for $fdt_control_addr and bringing up U-Boot while keeping the original incoming devicetree as $fdt_addr so that we can pass it to the next boot stage.
Quoted 5 lines
I'm not sure that's how this works? The "linux" vendor prefix is for Linux specific bindings and are expected to be present in the tree it receives, and not fixed up and added at runtime. But if you can proof of concept out what your idea, I suspect that would work to resolve a handful of problems all the same, so it would be good to see.
Gosh, great comments all, thank you.
I am going to send a v2 with most addressed and then perhaps we can do another round. It seems to me that the task here is to clearly document and motivate the status quo and immediate needs. As to future changes, who can say where things will go. But without a shared understanding of where we are and why, every discussion takes forever.
Regards,
Simon
Hi Heinrich,
Quoted 274 lines · Tom Rini
Quoted 263 lines · Heinrich Schuchardt
Quoted 250 lines · Tom Rini
Quoted 197 lines · Heinrich Schuchardt
Quoted 181 lines · Simon Glass
At present some of the ideas and techniques behind devicetree in U-Boot are assumed, implied or unsaid. Add some documentation to cover how devicetree is build, how it can be modified and the rules about using the various
CONFIG_OF_... options.Signed-off-by Simon Glass <[email protected]>---
doc/develop/index.rst | 1 + doc/develop/package/devicetree.rst | 315 +++++++++++++++++++++++++++++ doc/develop/package/index.rst | 1 + 3 files changed, 317 insertions(+)create mode 100644
doc/develop/package/devicetree.rstdoc/develop/index.rst +1
-0@@ -36,6 +36,7 @@ Packaging :maxdepth: 1 package/index + package/devicetree Testing -------doc/develop/package/devicetree.rst new file +149
-0@@ -0,0 +1,315 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +Updating the devicetree +======================= + +U-Boot uses devicetree for runtime configuration and storing required blobs or +any other information it needs to operate. It is possible to update the +devicetree separately from actually building U-Boot. This provides a good degree +of control and flexibility for firmware that uses U-Boot in conjunction with +other project. + +There are many reasons why it is useful to modify the devicetree after building +it: + +- Configuration can be changed, e.g. which UART to use +- A serial number can be added +- Public keys can be added to allow image verification +- Console output can be changed (e.g. to select serial or vidconsole) + +This section describes how to work with devicetree to accomplish your goals. + +See also :doc:`../devicetree/control` for a basic summary of the available +features. + + +Devicetree source +----------------- + +Every board in U-Boot must include a devicetree sufficient to build and boot +that board on suitable hardware (or emulation). This is specified using the +`CONFIG DEFAULT_DEVICE_TREE` option. + + +Current situation (August 2021) +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +As an aside, at present U-Boot allows `CONFIG_DEFAULT_DEVICE_TREE` to be empty, +e.g. if `CONFIG_OF_BOARD` or `CONFIG_OF_PRIOR_STAGE` are used. This has +unfortunately created an enormous amount of confusion and some wasted effort. +This was not intended and this bug will be fixed soon. Specifically: + +- `CONFIG_OF_BOARD` was added in rpi_patch_ for Raspberry Pi, which does have + an in-tree devicetree, but this feature has since been used for boards that + don't +- `CONFIG_OF_PRIOR_STAGE` was added in bcm_patch_ as part of a larger Broadcom + change with a tag indicating it only affected one board, so the change in + behaviour was not noticed at the time. It has since been used by RISC-V qemu + boards. + +Once this bug is fixed, CONFIG_OF_BOARD and CONFIG_OF_PRIOR_STAGE will override +(at runtime) the devicetree suppled with U-Boot, but will otherwise use +CONFIG_OF_SEPARATE for the in-tree build. So these two will become options, +moving out of the 'choice' in `dts/Kconfig` + +Offending boards are: + +- bcm7260 +- bcm7445 +- qemu_arm64 +- qemu_arm +- qemu-ppce500 +- qemu-riscv32 +- qemu-riscv32_smode +- qemu-riscv64 +- qemu-riscv64_smode + +All of these need to have a devicetree added in-tree. This is targeted to be +fixed in the 2022.01 release. + + +Building the devicetree +----------------------- + +U-Boot automatically builds the devicetree for a board, from the +`arch/<arch>/dts` directory. The Makefile in those directories has rules for +building devicetree files. It is preferable to avoid target-specific rules in +those files: i.e. all boards for a particular SoC should be built at once, +where practical. Apart from simplifying the Makefile, this helps to efficiently +(and immediately) ensure that changes in one board's DT do not break others that +are related. Building devicetrees is fast, so performance is seldom a concern +here. + + +Overriding the default devicetree +--------------------------------- + +When building U-Boot, the `DEVICE_TREE` environment variable allows the +default devicetree file to be overridden at build time. This can be useful if +modifications have to be made to the in-tree devicetree file, for the benefit +of a downstream build system. Note that the in-tree devicetree must be +sufficient to build and boot, so this is not a way to bypass that requirement. + + +Modifying the devicetree after building +--------------------------------------- + +While it is generally painful and hacky to modify the code or rodata of a +program after it is built, in many cases it is useul to do so, e.g. to add +configuration information like serial numbers, enabling/disabling features, etc. + +Devicetree provides a very nice solution to these problems since it is +structured data and it is relatively easy to change it, even in binary form +(see fdtput). + +U-Boot takes care that the devicetree is easily accessible after the build +process. In fact it is placed in a separate file called `u-boot.dtb`. If the +build system wants to modify or replace that file, it can do so. Then all that +is needed is to run `binman update` to update the file inside the image. If +binman is not used, then `u-boot-nodtb.bin` and the new `u-boot.dtb` can simply +be concatenated to achieve the desired result. U-Boot happily copes with the +devicetree growing or shrinking. + +The `u-boot.bin` image contains both pieces. While it is possible to locate the +devicetree within the image using the signature at the start of the file, this +is a bit messy. + +This is why `CONFIG_OF_SEPARATE` should always be used when building U-Boot. +The `CONFIG_OF_EMBED` option embeds the devicetree somewhere in the U-Boot ELF +image as rodata, meaning that it is hard to find it and it cannot increase in +size. + +When modifying the devicetree, the different cases to consider are as follows: + +- CONFIG_OF_SEPARATE + This is easy, described above. Just change, replace or rebuild the + devicetree so it suits your needs, then rerun binman or redo the `cat` + operation to join `u-boot-nodtb.bin` and the new `u-boot.dtb` + +- CONFIG_OF_EMBD + This is tricky, since the devicetree cannot easily be located. If the EFL + file is available, then the _dtb_dt_begin and __dtb_dt_end symbols can be + examined to find it. While it is possible to contract the file, it is not + possible to expand the file since that would involve re-linking + +- CONFIG_OF_PRIOR_STAGE + In this case the devicetree must be modified in the project which provides + it, as described below + +- CONFIG_OF_BOARD + This is a board-specific situation, so needs to be considered on a + case-by-case base. The devicetree must be modified so that the correct + one is provided to U-Boot. How this is done depends entirely on the + implementation of this option for the board. It might require injecting the + changes into a different project somehow using tooling available there, or + it might involve merging an overlay file at runtime to obtain the desired + result. + + +Devicetree in another projectdoc/develop/package/devicetree.rst line 159
Quoted 10 lines
doc/develop/package/devicetree.rst new file +10
-0+----------------------------- + +In some cases U-Boot receive its devicetree at runtime from a program that calls +it. For example ARM's Trusted Firmware A (`TF-A`_) may have a devicetree that it +passes to U-Boot. This overrides any devicetree build by U-Boot. When packaging +the firmware, the U-Boot devicetree may in fact be left out if it can be +guaranteed that it will receive one from another project. + +In this case, the devicetree in the other project must track U-Boot's use of +device tree. It must provide a way to add configuration and other information toU-Boot does not rule the world. So never ever is this going to happen. It is the other way round. U-Boot must consume what the prior bootstage delivers. If U-Boot needs extra nodes it has to provide these on its own.
Quoted 1 line
Please, remove this assumption from the document.
We need to figure out which compatibles we need to push upstream, and which we need to see if we can solve another way.
Quoted 9 lines
doc/develop/package/devicetree.rst line 165
Quoted 6 lines
doc/develop/package/devicetree.rst new file +6
-0+the devicetree for use by U-Boot, such as the /config node. Note that the +U-Boot in-tree devicetree must be sufficient to build and boot, so this is not a +way to bypass that requirement. + +If binman is used, the in-tree U-Boot devicetree must contain the binman +definition so that a valid image can be build.No clue what an in-tree tree might be. Please, avoid such confusing language.
Would "source tree devicetree" be less confusing? Or can you suggest an alternative?
Quoted 6 lines
doc/develop/package/devicetree.rst line 167
Quoted 3 lines
doc/develop/package/devicetree.rst new file +2
-0+ +If verified boot is used, the project must provide a way to inject a public key,%s/the project/U-Boot/
Quoted 7 lines
doc/develop/package/devicetree.rst line 174
Quoted 7 lines
doc/develop/package/devicetree.rst new file +7
-0+certificate or other material into the U-Boot devicetree so that it is available +to U-Boot at runtime. See `Signing with U-Boot devicetree`_. This may be +through tooling in the project itself or by making use of U-Boot's tooling. + + +Devicetree generated on-the-fly in another project +--------------------------------------------------I think this is a confusing topic, and gets things a bit backwards.
Quoted 5 lines
doc/develop/package/devicetree.rst line 179
Quoted 5 lines
doc/develop/package/devicetree.rst new file +5
-0+ +In some rare cases, another project may wish to create a devicetree for U-Boot +entirely on-the-fly, then pass it to U-Boot at runtime. The only known example +of this at the time of writing (2021) is qemu, for ARM (`QEMU ARM`_) and +RISC-V (`QEMU RISC-V`_).What's the difference between QEMU and hardware that ships with a device tree stored in flash? In both cases, we need to have the device tree that's provided be the device tree that works. Like I was just raising in another thread, there are not multiple device trees for a given device, there is the device tree and it works for everyone that needs to consume a device tree.
Quoted 5 lines
doc/develop/package/devicetree.rst line 181
Quoted 2 lines
doc/develop/package/devicetree.rst new file +2
-0+In this case, the devicetree in the other project must track U-Boot's use of +device tree, so that it remains compatible. If a particular version of theWhy? U-Boot must support its internal needs itself!
Quoted 7 lines
Quoted 3 lines
Don't try to force a bad U-Boot design on other projects.
Please, come up with a concept that makes sense.
This is the same situation as above, where we need to see about pushing some changes upstream perhaps.
In U-Boot we currently have a lot of device-tree nodes that are irrelevant for anything but U-Boot, e.g. all those nodes marked as compatible to "u-boot,*". It does not make sense to push these upstream.
Quoted 8 lines
So if a prior bootstage provides a devicetree, we need a separate devicetree in U-Boot.
We can copy the incoming devicetree to a private copy and amend all our U-Boot specific stuff. Then let's use this private copy for $fdt_control_addr and bringing up U-Boot while keeping the original incoming devicetree as $fdt_addr so that we can pass it to the next boot stage.
Quoted 5 lines
I'm not sure that's how this works? The "linux" vendor prefix is for Linux specific bindings and are expected to be present in the tree it receives, and not fixed up and added at runtime. But if you can proof of concept out what your idea, I suspect that would work to resolve a handful of problems all the same, so it would be good to see.
I actually suggested a different approach: copy the DT before fixing it up. This effectively happens already if OF_LIVE is enabled.
U-Boot obviously cannot 'amend all our U-Boot specific stuff' at runtime unless that is available somewhere else (at runtime). I'll address that point in the v2 series.
Should we require the Linux stuff to be in a separate DT also? :-)
Regards,
SImon
Hi Simon,
Quoted 91 lines · Simon Glass
At present some of the ideas and techniques behind devicetree in U-Boot are assumed, implied or unsaid. Add some documentation to cover how devicetree is build, how it can be modified and the rules about using the various
CONFIG_OF_... options.Signed-off-by Simon Glass <[email protected]>---
doc/develop/index.rst | 1 + doc/develop/package/devicetree.rst | 315 +++++++++++++++++++++++++++++ doc/develop/package/index.rst | 1 + 3 files changed, 317 insertions(+) create mode 100644 doc/develop/package/devicetree.rstdoc/develop/index.rst +1
-0@@ -36,6 +36,7 @@ Packaging :maxdepth: 1 package/index + package/devicetree Testing -------doc/develop/package/devicetree.rst new file +58
-0@@ -0,0 +1,315 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +Updating the devicetree +======================= + +U-Boot uses devicetree for runtime configuration and storing required blobs or +any other information it needs to operate. It is possible to update the +devicetree separately from actually building U-Boot. This provides a good degree +of control and flexibility for firmware that uses U-Boot in conjunction with +other project. + +There are many reasons why it is useful to modify the devicetree after building +it: + +- Configuration can be changed, e.g. which UART to use +- A serial number can be added +- Public keys can be added to allow image verification +- Console output can be changed (e.g. to select serial or vidconsole) + +This section describes how to work with devicetree to accomplish your goals. + +See also :doc:`../devicetree/control` for a basic summary of the available +features. + + +Devicetree source +----------------- + +Every board in U-Boot must include a devicetree sufficient to build and boot +that board on suitable hardware (or emulation). This is specified using the +`CONFIG DEFAULT_DEVICE_TREE` option. + + +Current situation (August 2021) +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +As an aside, at present U-Boot allows `CONFIG_DEFAULT_DEVICE_TREE` to be empty, +e.g. if `CONFIG_OF_BOARD` or `CONFIG_OF_PRIOR_STAGE` are used. This has +unfortunately created an enormous amount of confusion and some wasted effort. +This was not intended and this bug will be fixed soon. Specifically: + +- `CONFIG_OF_BOARD` was added in rpi_patch_ for Raspberry Pi, which does have + an in-tree devicetree, but this feature has since been used for boards that + don't +- `CONFIG_OF_PRIOR_STAGE` was added in bcm_patch_ as part of a larger Broadcom + change with a tag indicating it only affected one board, so the change in + behaviour was not noticed at the time. It has since been used by RISC-V qemu + boards. + +Once this bug is fixed, CONFIG_OF_BOARD and CONFIG_OF_PRIOR_STAGE will override +(at runtime) the devicetree suppled with U-Boot, but will otherwise use +CONFIG_OF_SEPARATE for the in-tree build. So these two will become options, +moving out of the 'choice' in `dts/Kconfig` + +Offending boards are: + +- bcm7260 +- bcm7445
doc/develop/package/devicetree.rst line 68
Quoted 10 lines
doc/develop/package/devicetree.rst new file +10
-0+- qemu_arm64 +- qemu_arm +- qemu-ppce500 +- qemu-riscv32 +- qemu-riscv32_smode +- qemu-riscv64 +- qemu-riscv64_smode + +All of these need to have a devicetree added in-tree. This is targeted to be +fixed in the 2022.01 release.
Do you have some idea of how to support the QEMU case, if not using CONFIG_OF_PRIOR_STAGE?
Regards,
Bin
Hi Bin,
Quoted 100 lines · Bin Meng
Hi Simon,
Quoted 96 lines · Simon Glass
At present some of the ideas and techniques behind devicetree in U-Boot are assumed, implied or unsaid. Add some documentation to cover how devicetree is build, how it can be modified and the rules about using the various
CONFIG_OF_... options.Signed-off-by Simon Glass <[email protected]>---
doc/develop/index.rst | 1 + doc/develop/package/devicetree.rst | 315 +++++++++++++++++++++++++++++ doc/develop/package/index.rst | 1 + 3 files changed, 317 insertions(+) create mode 100644 doc/develop/package/devicetree.rstdoc/develop/index.rst +1
-0@@ -36,6 +36,7 @@ Packaging :maxdepth: 1 package/index + package/devicetree Testing -------doc/develop/package/devicetree.rst new file +63
-0@@ -0,0 +1,315 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +Updating the devicetree +======================= + +U-Boot uses devicetree for runtime configuration and storing required blobs or +any other information it needs to operate. It is possible to update the +devicetree separately from actually building U-Boot. This provides a good degree +of control and flexibility for firmware that uses U-Boot in conjunction with +other project. + +There are many reasons why it is useful to modify the devicetree after building +it: + +- Configuration can be changed, e.g. which UART to use +- A serial number can be added +- Public keys can be added to allow image verification +- Console output can be changed (e.g. to select serial or vidconsole) + +This section describes how to work with devicetree to accomplish your goals. + +See also :doc:`../devicetree/control` for a basic summary of the available +features. + + +Devicetree source +----------------- + +Every board in U-Boot must include a devicetree sufficient to build and boot +that board on suitable hardware (or emulation). This is specified using the +`CONFIG DEFAULT_DEVICE_TREE` option. + + +Current situation (August 2021) +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +As an aside, at present U-Boot allows `CONFIG_DEFAULT_DEVICE_TREE` to be empty, +e.g. if `CONFIG_OF_BOARD` or `CONFIG_OF_PRIOR_STAGE` are used. This has +unfortunately created an enormous amount of confusion and some wasted effort. +This was not intended and this bug will be fixed soon. Specifically: + +- `CONFIG_OF_BOARD` was added in rpi_patch_ for Raspberry Pi, which does have + an in-tree devicetree, but this feature has since been used for boards that + don't +- `CONFIG_OF_PRIOR_STAGE` was added in bcm_patch_ as part of a larger Broadcom + change with a tag indicating it only affected one board, so the change in + behaviour was not noticed at the time. It has since been used by RISC-V qemu + boards. + +Once this bug is fixed, CONFIG_OF_BOARD and CONFIG_OF_PRIOR_STAGE will override +(at runtime) the devicetree suppled with U-Boot, but will otherwise use +CONFIG_OF_SEPARATE for the in-tree build. So these two will become options, +moving out of the 'choice' in `dts/Kconfig` + +Offending boards are: + +- bcm7260 +- bcm7445 +- qemu_arm64 +- qemu_arm +- qemu-ppce500 +- qemu-riscv32 +- qemu-riscv32_smode
Quoted 8 lines
doc/develop/package/devicetree.rst line 68
Quoted 5 lines
doc/develop/package/devicetree.rst new file +5
-0+- qemu-riscv64 +- qemu-riscv64_smode + +All of these need to have a devicetree added in-tree. This is targeted to be +fixed in the 2022.01 release.Do you have some idea of how to support the QEMU case, if not using
CONFIG_OF_PRIOR_STAGE?
To be clear, I am not planning to remove this option. It will still work.
But I do want to have an in-tree devicetree for all boards, and someone will need to update qemu to support adding U-Boot nodes/properties. It always has an array of options controlling what it presents to BIOS/UEFI, for example, so this should not be too controversial.
Regards,
Simon
Hi Simon,
Quoted 113 lines · Simon Glass
Hi Bin,
Quoted 100 lines · Bin Meng
Hi Simon,
Quoted 96 lines · Simon Glass
At present some of the ideas and techniques behind devicetree in U-Boot are assumed, implied or unsaid. Add some documentation to cover how devicetree is build, how it can be modified and the rules about using the various
CONFIG_OF_... options.Signed-off-by Simon Glass <[email protected]>---
doc/develop/index.rst | 1 + doc/develop/package/devicetree.rst | 315 +++++++++++++++++++++++++++++ doc/develop/package/index.rst | 1 + 3 files changed, 317 insertions(+) create mode 100644 doc/develop/package/devicetree.rstdoc/develop/index.rst +1
-0@@ -36,6 +36,7 @@ Packaging :maxdepth: 1 package/index + package/devicetree Testing -------doc/develop/package/devicetree.rst new file +63
-0@@ -0,0 +1,315 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +Updating the devicetree +======================= + +U-Boot uses devicetree for runtime configuration and storing required blobs or +any other information it needs to operate. It is possible to update the +devicetree separately from actually building U-Boot. This provides a good degree +of control and flexibility for firmware that uses U-Boot in conjunction with +other project. + +There are many reasons why it is useful to modify the devicetree after building +it: + +- Configuration can be changed, e.g. which UART to use +- A serial number can be added +- Public keys can be added to allow image verification +- Console output can be changed (e.g. to select serial or vidconsole) + +This section describes how to work with devicetree to accomplish your goals. + +See also :doc:`../devicetree/control` for a basic summary of the available +features. + + +Devicetree source +----------------- + +Every board in U-Boot must include a devicetree sufficient to build and boot +that board on suitable hardware (or emulation). This is specified using the +`CONFIG DEFAULT_DEVICE_TREE` option. + + +Current situation (August 2021) +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +As an aside, at present U-Boot allows `CONFIG_DEFAULT_DEVICE_TREE` to be empty, +e.g. if `CONFIG_OF_BOARD` or `CONFIG_OF_PRIOR_STAGE` are used. This has +unfortunately created an enormous amount of confusion and some wasted effort. +This was not intended and this bug will be fixed soon. Specifically: + +- `CONFIG_OF_BOARD` was added in rpi_patch_ for Raspberry Pi, which does have + an in-tree devicetree, but this feature has since been used for boards that + don't +- `CONFIG_OF_PRIOR_STAGE` was added in bcm_patch_ as part of a larger Broadcom + change with a tag indicating it only affected one board, so the change in + behaviour was not noticed at the time. It has since been used by RISC-V qemu + boards. + +Once this bug is fixed, CONFIG_OF_BOARD and CONFIG_OF_PRIOR_STAGE will override +(at runtime) the devicetree suppled with U-Boot, but will otherwise use +CONFIG_OF_SEPARATE for the in-tree build. So these two will become options, +moving out of the 'choice' in `dts/Kconfig` + +Offending boards are: + +- bcm7260 +- bcm7445 +- qemu_arm64 +- qemu_arm +- qemu-ppce500 +- qemu-riscv32 +- qemu-riscv32_smodeQuoted 8 lines
doc/develop/package/devicetree.rst line 68
Quoted 5 lines
doc/develop/package/devicetree.rst new file +5
-0+- qemu-riscv64 +- qemu-riscv64_smode + +All of these need to have a devicetree added in-tree. This is targeted to be +fixed in the 2022.01 release.Do you have some idea of how to support the QEMU case, if not using
CONFIG_OF_PRIOR_STAGE?
Quoted 7 lines
To be clear, I am not planning to remove this option. It will still work.
But I do want to have an in-tree devicetree for all boards, and someone will need to update qemu to support adding U-Boot nodes/properties. It always has an array of options controlling what it presents to BIOS/UEFI, for example, so this should not be too controversial.
I think there is some misunderstanding.
Adding U-Boot nodes/properties is not a problem for QEMU, but the thing is that these QEMU targets don't require U-Boot specific nodes/properties. It's just that QEMU will generate the DTB on the fly based on different command-line options, so the DTB is dynamic and we can't hardcode one in the U-Boot tree.
My understanding is that we should remove CONFIG_OF_BOARD but keep CONFIG_OF_PRIOR_STAGE for such use case like QEMU.
Regards,
Bin
Hi Bin,
Quoted 125 lines · Bin Meng
Hi Simon,
Quoted 113 lines · Simon Glass
Hi Bin,
Quoted 100 lines · Bin Meng
Hi Simon,
Quoted 96 lines · Simon Glass
At present some of the ideas and techniques behind devicetree in U-Boot are assumed, implied or unsaid. Add some documentation to cover how devicetree is build, how it can be modified and the rules about using the various
CONFIG_OF_... options.Signed-off-by Simon Glass <[email protected]>---
doc/develop/index.rst | 1 + doc/develop/package/devicetree.rst | 315 +++++++++++++++++++++++++++++ doc/develop/package/index.rst | 1 + 3 files changed, 317 insertions(+) create mode 100644 doc/develop/package/devicetree.rstdoc/develop/index.rst +1
-0@@ -36,6 +36,7 @@ Packaging :maxdepth: 1 package/index + package/devicetree Testing -------doc/develop/package/devicetree.rst new file +63
-0@@ -0,0 +1,315 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +Updating the devicetree +======================= + +U-Boot uses devicetree for runtime configuration and storing required blobs or +any other information it needs to operate. It is possible to update the +devicetree separately from actually building U-Boot. This provides a good degree +of control and flexibility for firmware that uses U-Boot in conjunction with +other project. + +There are many reasons why it is useful to modify the devicetree after building +it: + +- Configuration can be changed, e.g. which UART to use +- A serial number can be added +- Public keys can be added to allow image verification +- Console output can be changed (e.g. to select serial or vidconsole) + +This section describes how to work with devicetree to accomplish your goals. + +See also :doc:`../devicetree/control` for a basic summary of the available +features. + + +Devicetree source +----------------- + +Every board in U-Boot must include a devicetree sufficient to build and boot +that board on suitable hardware (or emulation). This is specified using the +`CONFIG DEFAULT_DEVICE_TREE` option. + + +Current situation (August 2021) +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +As an aside, at present U-Boot allows `CONFIG_DEFAULT_DEVICE_TREE` to be empty, +e.g. if `CONFIG_OF_BOARD` or `CONFIG_OF_PRIOR_STAGE` are used. This has +unfortunately created an enormous amount of confusion and some wasted effort. +This was not intended and this bug will be fixed soon. Specifically: + +- `CONFIG_OF_BOARD` was added in rpi_patch_ for Raspberry Pi, which does have + an in-tree devicetree, but this feature has since been used for boards that + don't +- `CONFIG_OF_PRIOR_STAGE` was added in bcm_patch_ as part of a larger Broadcom + change with a tag indicating it only affected one board, so the change in + behaviour was not noticed at the time. It has since been used by RISC-V qemu + boards. + +Once this bug is fixed, CONFIG_OF_BOARD and CONFIG_OF_PRIOR_STAGE will override +(at runtime) the devicetree suppled with U-Boot, but will otherwise use +CONFIG_OF_SEPARATE for the in-tree build. So these two will become options, +moving out of the 'choice' in `dts/Kconfig` + +Offending boards are: + +- bcm7260 +- bcm7445 +- qemu_arm64 +- qemu_arm +- qemu-ppce500 +- qemu-riscv32 +- qemu-riscv32_smodeQuoted 8 lines
doc/develop/package/devicetree.rst line 68
Quoted 5 lines
doc/develop/package/devicetree.rst new file +5
-0+- qemu-riscv64 +- qemu-riscv64_smode + +All of these need to have a devicetree added in-tree. This is targeted to be +fixed in the 2022.01 release.Do you have some idea of how to support the QEMU case, if not using
CONFIG_OF_PRIOR_STAGE?Quoted 7 lines
To be clear, I am not planning to remove this option. It will still work.
But I do want to have an in-tree devicetree for all boards, and someone will need to update qemu to support adding U-Boot nodes/properties. It always has an array of options controlling what it presents to BIOS/UEFI, for example, so this should not be too controversial.
Quoted 7 lines
I think there is some misunderstanding.
Adding U-Boot nodes/properties is not a problem for QEMU, but the thing is that these QEMU targets don't require U-Boot specific nodes/properties. It's just that QEMU will generate the DTB on the fly based on different command-line options, so the DTB is dynamic and we can't hardcode one in the U-Boot tree.
That's fine, but I do want some sort of sample in the tree, like we have for qemu-x86 and others. For some reason ARM and RISC-V don't have one.
Also, QEMU needs a way to add properties and nodes that are specific to U-Boot, since at present there is no way at all to pass these through (/config node, u-boot,dm-xxx tags, etc.).
Perhaps something like the -dtb option that it already has, but just for something to merge with what it uses.
Quoted 3 lines
My understanding is that we should remove
CONFIG_OF_BOARDbut keepCONFIG_OF_PRIOR_STAGEfor such use case like QEMU.
Fair enough if OF_BOARD is basically a duplicate. I'm actually not sure...
Regards,
SImon
Quoted 139 lines
From: Simon Glass <[email protected]>
Date: Sat, 28 Aug 2021 20:07:27 -0600Hi Bin,
Quoted 125 lines · Bin Meng
Hi Simon,
Quoted 113 lines · Simon Glass
Hi Bin,
Quoted 100 lines · Bin Meng
Hi Simon,
Quoted 96 lines · Simon Glass
At present some of the ideas and techniques behind devicetree in U-Boot are assumed, implied or unsaid. Add some documentation to cover how devicetree is build, how it can be modified and the rules about using the various
CONFIG_OF_... options.Signed-off-by Simon Glass <[email protected]>---
doc/develop/index.rst | 1 + doc/develop/package/devicetree.rst | 315 +++++++++++++++++++++++++++++ doc/develop/package/index.rst | 1 + 3 files changed, 317 insertions(+) create mode 100644 doc/develop/package/devicetree.rstdoc/develop/index.rst +1
-0@@ -36,6 +36,7 @@ Packaging :maxdepth: 1 package/index + package/devicetree Testing -------doc/develop/package/devicetree.rst new file +63
-0@@ -0,0 +1,315 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +Updating the devicetree +======================= + +U-Boot uses devicetree for runtime configuration and storing required blobs or +any other information it needs to operate. It is possible to update the +devicetree separately from actually building U-Boot. This provides a good degree +of control and flexibility for firmware that uses U-Boot in conjunction with +other project. + +There are many reasons why it is useful to modify the devicetree after building +it: + +- Configuration can be changed, e.g. which UART to use +- A serial number can be added +- Public keys can be added to allow image verification +- Console output can be changed (e.g. to select serial or vidconsole) + +This section describes how to work with devicetree to accomplish your goals. + +See also :doc:`../devicetree/control` for a basic summary of the available +features. + + +Devicetree source +----------------- + +Every board in U-Boot must include a devicetree sufficient to build and boot +that board on suitable hardware (or emulation). This is specified using the +`CONFIG DEFAULT_DEVICE_TREE` option. + + +Current situation (August 2021) +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +As an aside, at present U-Boot allows `CONFIG_DEFAULT_DEVICE_TREE` to be empty, +e.g. if `CONFIG_OF_BOARD` or `CONFIG_OF_PRIOR_STAGE` are used. This has +unfortunately created an enormous amount of confusion and some wasted effort. +This was not intended and this bug will be fixed soon. Specifically: + +- `CONFIG_OF_BOARD` was added in rpi_patch_ for Raspberry Pi, which does have + an in-tree devicetree, but this feature has since been used for boards that + don't +- `CONFIG_OF_PRIOR_STAGE` was added in bcm_patch_ as part of a larger Broadcom + change with a tag indicating it only affected one board, so the change in + behaviour was not noticed at the time. It has since been used by RISC-V qemu + boards. + +Once this bug is fixed, CONFIG_OF_BOARD and CONFIG_OF_PRIOR_STAGE will override +(at runtime) the devicetree suppled with U-Boot, but will otherwise use +CONFIG_OF_SEPARATE for the in-tree build. So these two will become options, +moving out of the 'choice' in `dts/Kconfig` + +Offending boards are: + +- bcm7260 +- bcm7445 +- qemu_arm64 +- qemu_arm +- qemu-ppce500 +- qemu-riscv32 +- qemu-riscv32_smodeQuoted 8 lines
doc/develop/package/devicetree.rst line 68
Quoted 5 lines
doc/develop/package/devicetree.rst new file +5
-0+- qemu-riscv64 +- qemu-riscv64_smode + +All of these need to have a devicetree added in-tree. This is targeted to be +fixed in the 2022.01 release.Do you have some idea of how to support the QEMU case, if not using
CONFIG_OF_PRIOR_STAGE?Quoted 7 lines
To be clear, I am not planning to remove this option. It will still work.
But I do want to have an in-tree devicetree for all boards, and someone will need to update qemu to support adding U-Boot nodes/properties. It always has an array of options controlling what it presents to BIOS/UEFI, for example, so this should not be too controversial.
Quoted 7 lines
I think there is some misunderstanding.
Adding U-Boot nodes/properties is not a problem for QEMU, but the thing is that these QEMU targets don't require U-Boot specific nodes/properties. It's just that QEMU will generate the DTB on the fly based on different command-line options, so the DTB is dynamic and we can't hardcode one in the U-Boot tree.
Quoted 7 lines
That's fine, but I do want some sort of sample in the tree, like we have for qemu-x86 and others. For some reason ARM and RISC-V don't have one.
Also, QEMU needs a way to add properties and nodes that are specific to U-Boot, since at present there is no way at all to pass these through (/config node, u-boot,dm-xxx tags, etc.).
I suppose some of the /config stuff could be nice and that the device tree is indeed the most appropriate way to pass runtime options from QEMU to U-Boot. But I'd say U-Boot should still work (with reasonable defaults) if no U-Boot specific options are present in the device tree.
My understanding is that the u-boot,dm-xxx tags are for SPL. It seems that for most scenarios having where there is some prior firmware that passes a device tree, SPL isn't used. That certainly is the case for QEMU, Raspberry Pi and my Apple M1 work.
Quoted 10 lines
Perhaps something like the -dtb option that it already has, but just for something to merge with what it uses.
Quoted 2 lines
My understanding is that we should remove
CONFIG_OF_BOARDbut keepCONFIG_OF_PRIOR_STAGEfor such use case like QEMU.Fair enough if
OF_BOARDis basically a duplicate. I'm actually not sure...Regards,
SImon
Hi Mark,
Quoted 148 lines · Mark Kettenis
Quoted 140 lines
From: Simon Glass <[email protected]>
Date: Sat, 28 Aug 2021 20:07:27 -0600Hi Bin,
Quoted 125 lines · Bin Meng
Hi Simon,
Quoted 113 lines · Simon Glass
Hi Bin,
Quoted 100 lines · Bin Meng
Hi Simon,
Quoted 96 lines · Simon Glass
At present some of the ideas and techniques behind devicetree in U-Boot are assumed, implied or unsaid. Add some documentation to cover how devicetree is build, how it can be modified and the rules about using the various
CONFIG_OF_... options.Signed-off-by Simon Glass <[email protected]>---
doc/develop/index.rst | 1 + doc/develop/package/devicetree.rst | 315 +++++++++++++++++++++++++++++ doc/develop/package/index.rst | 1 + 3 files changed, 317 insertions(+) create mode 100644 doc/develop/package/devicetree.rstdoc/develop/index.rst +1
-0@@ -36,6 +36,7 @@ Packaging :maxdepth: 1 package/index + package/devicetree Testing -------doc/develop/package/devicetree.rst new file +63
-0@@ -0,0 +1,315 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +Updating the devicetree +======================= + +U-Boot uses devicetree for runtime configuration and storing required blobs or +any other information it needs to operate. It is possible to update the +devicetree separately from actually building U-Boot. This provides a good degree +of control and flexibility for firmware that uses U-Boot in conjunction with +other project. + +There are many reasons why it is useful to modify the devicetree after building +it: + +- Configuration can be changed, e.g. which UART to use +- A serial number can be added +- Public keys can be added to allow image verification +- Console output can be changed (e.g. to select serial or vidconsole) + +This section describes how to work with devicetree to accomplish your goals. + +See also :doc:`../devicetree/control` for a basic summary of the available +features. + + +Devicetree source +----------------- + +Every board in U-Boot must include a devicetree sufficient to build and boot +that board on suitable hardware (or emulation). This is specified using the +`CONFIG DEFAULT_DEVICE_TREE` option. + + +Current situation (August 2021) +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +As an aside, at present U-Boot allows `CONFIG_DEFAULT_DEVICE_TREE` to be empty, +e.g. if `CONFIG_OF_BOARD` or `CONFIG_OF_PRIOR_STAGE` are used. This has +unfortunately created an enormous amount of confusion and some wasted effort. +This was not intended and this bug will be fixed soon. Specifically: + +- `CONFIG_OF_BOARD` was added in rpi_patch_ for Raspberry Pi, which does have + an in-tree devicetree, but this feature has since been used for boards that + don't +- `CONFIG_OF_PRIOR_STAGE` was added in bcm_patch_ as part of a larger Broadcom + change with a tag indicating it only affected one board, so the change in + behaviour was not noticed at the time. It has since been used by RISC-V qemu + boards. + +Once this bug is fixed, CONFIG_OF_BOARD and CONFIG_OF_PRIOR_STAGE will override +(at runtime) the devicetree suppled with U-Boot, but will otherwise use +CONFIG_OF_SEPARATE for the in-tree build. So these two will become options, +moving out of the 'choice' in `dts/Kconfig` + +Offending boards are: + +- bcm7260 +- bcm7445 +- qemu_arm64 +- qemu_arm +- qemu-ppce500 +- qemu-riscv32 +- qemu-riscv32_smodeQuoted 8 lines
doc/develop/package/devicetree.rst line 68
Quoted 5 lines
doc/develop/package/devicetree.rst new file +5
-0+- qemu-riscv64 +- qemu-riscv64_smode + +All of these need to have a devicetree added in-tree. This is targeted to be +fixed in the 2022.01 release.Do you have some idea of how to support the QEMU case, if not using
CONFIG_OF_PRIOR_STAGE?Quoted 7 lines
To be clear, I am not planning to remove this option. It will still work.
But I do want to have an in-tree devicetree for all boards, and someone will need to update qemu to support adding U-Boot nodes/properties. It always has an array of options controlling what it presents to BIOS/UEFI, for example, so this should not be too controversial.
Quoted 7 lines
I think there is some misunderstanding.
Adding U-Boot nodes/properties is not a problem for QEMU, but the thing is that these QEMU targets don't require U-Boot specific nodes/properties. It's just that QEMU will generate the DTB on the fly based on different command-line options, so the DTB is dynamic and we can't hardcode one in the U-Boot tree.
Quoted 7 lines
That's fine, but I do want some sort of sample in the tree, like we have for qemu-x86 and others. For some reason ARM and RISC-V don't have one.
Also, QEMU needs a way to add properties and nodes that are specific to U-Boot, since at present there is no way at all to pass these through (/config node, u-boot,dm-xxx tags, etc.).
Quoted 5 lines
I suppose some of the /config stuff could be nice and that the device tree is indeed the most appropriate way to pass runtime options from QEMU to U-Boot. But I'd say U-Boot should still work (with reasonable defaults) if no U-Boot specific options are present in the device tree.
Well I believe it does and actually I think CI currently checks this.The config node is certainly optional. But it would not support booting signed images, for example, without the public key.
Quoted 5 lines
My understanding is that the u-boot,dm-xxx tags are for SPL. It seems that for most scenarios having where there is some prior firmware that passes a device tree, SPL isn't used. That certainly is the case for QEMU, Raspberry Pi and my Apple M1 work.
Yes that is true and I suppose is how things are able to work at present.
But I do see QMU for RISC-V with an SPL boot, although it is only mentioned in the docs, so perhaps it is not in the CI yet. If there are few enough devices and enough memory (and you don't care about boot speed) then the u-boot,dm-xxx tags are not strictly necessary. But then we are using QEMU in a somewhat unrealistic state.
Quoted 8 lines
Quoted 8 lines
Perhaps something like the -dtb option that it already has, but just for something to merge with what it uses.
Quoted 2 lines
My understanding is that we should remove
CONFIG_OF_BOARDbut keepCONFIG_OF_PRIOR_STAGEfor such use case like QEMU.Fair enough if
OF_BOARDis basically a duplicate. I'm actually not sure...
Regards,
Simon
Hi Simon,
Quoted 168 lines · Simon Glass
Hi Mark,
Quoted 148 lines · Mark Kettenis
Quoted 140 lines
From: Simon Glass <[email protected]>
Date: Sat, 28 Aug 2021 20:07:27 -0600Hi Bin,
Quoted 125 lines · Bin Meng
Hi Simon,
Quoted 113 lines · Simon Glass
Hi Bin,
Quoted 100 lines · Bin Meng
Hi Simon,
Quoted 96 lines · Simon Glass
At present some of the ideas and techniques behind devicetree in U-Boot are assumed, implied or unsaid. Add some documentation to cover how devicetree is build, how it can be modified and the rules about using the various
CONFIG_OF_... options.Signed-off-by Simon Glass <[email protected]>---
doc/develop/index.rst | 1 + doc/develop/package/devicetree.rst | 315 +++++++++++++++++++++++++++++ doc/develop/package/index.rst | 1 + 3 files changed, 317 insertions(+) create mode 100644 doc/develop/package/devicetree.rstdoc/develop/index.rst +1
-0@@ -36,6 +36,7 @@ Packaging :maxdepth: 1 package/index + package/devicetree Testing -------doc/develop/package/devicetree.rst new file +63
-0@@ -0,0 +1,315 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +Updating the devicetree +======================= + +U-Boot uses devicetree for runtime configuration and storing required blobs or +any other information it needs to operate. It is possible to update the +devicetree separately from actually building U-Boot. This provides a good degree +of control and flexibility for firmware that uses U-Boot in conjunction with +other project. + +There are many reasons why it is useful to modify the devicetree after building +it: + +- Configuration can be changed, e.g. which UART to use +- A serial number can be added +- Public keys can be added to allow image verification +- Console output can be changed (e.g. to select serial or vidconsole) + +This section describes how to work with devicetree to accomplish your goals. + +See also :doc:`../devicetree/control` for a basic summary of the available +features. + + +Devicetree source +----------------- + +Every board in U-Boot must include a devicetree sufficient to build and boot +that board on suitable hardware (or emulation). This is specified using the +`CONFIG DEFAULT_DEVICE_TREE` option. + + +Current situation (August 2021) +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +As an aside, at present U-Boot allows `CONFIG_DEFAULT_DEVICE_TREE` to be empty, +e.g. if `CONFIG_OF_BOARD` or `CONFIG_OF_PRIOR_STAGE` are used. This has +unfortunately created an enormous amount of confusion and some wasted effort. +This was not intended and this bug will be fixed soon. Specifically: + +- `CONFIG_OF_BOARD` was added in rpi_patch_ for Raspberry Pi, which does have + an in-tree devicetree, but this feature has since been used for boards that + don't +- `CONFIG_OF_PRIOR_STAGE` was added in bcm_patch_ as part of a larger Broadcom + change with a tag indicating it only affected one board, so the change in + behaviour was not noticed at the time. It has since been used by RISC-V qemu + boards. + +Once this bug is fixed, CONFIG_OF_BOARD and CONFIG_OF_PRIOR_STAGE will override +(at runtime) the devicetree suppled with U-Boot, but will otherwise use +CONFIG_OF_SEPARATE for the in-tree build. So these two will become options, +moving out of the 'choice' in `dts/Kconfig` + +Offending boards are: + +- bcm7260 +- bcm7445 +- qemu_arm64 +- qemu_arm +- qemu-ppce500 +- qemu-riscv32 +- qemu-riscv32_smodeQuoted 8 lines
doc/develop/package/devicetree.rst line 68
Quoted 5 lines
doc/develop/package/devicetree.rst new file +5
-0+- qemu-riscv64 +- qemu-riscv64_smode + +All of these need to have a devicetree added in-tree. This is targeted to be +fixed in the 2022.01 release.Do you have some idea of how to support the QEMU case, if not using
CONFIG_OF_PRIOR_STAGE?Quoted 7 lines
To be clear, I am not planning to remove this option. It will still work.
But I do want to have an in-tree devicetree for all boards, and someone will need to update qemu to support adding U-Boot nodes/properties. It always has an array of options controlling what it presents to BIOS/UEFI, for example, so this should not be too controversial.
Quoted 7 lines
I think there is some misunderstanding.
Adding U-Boot nodes/properties is not a problem for QEMU, but the thing is that these QEMU targets don't require U-Boot specific nodes/properties. It's just that QEMU will generate the DTB on the fly based on different command-line options, so the DTB is dynamic and we can't hardcode one in the U-Boot tree.
Quoted 7 lines
That's fine, but I do want some sort of sample in the tree, like we have for qemu-x86 and others. For some reason ARM and RISC-V don't have one.
Also, QEMU needs a way to add properties and nodes that are specific to U-Boot, since at present there is no way at all to pass these through (/config node, u-boot,dm-xxx tags, etc.).
Quoted 5 lines
I suppose some of the /config stuff could be nice and that the device tree is indeed the most appropriate way to pass runtime options from QEMU to U-Boot. But I'd say U-Boot should still work (with reasonable defaults) if no U-Boot specific options are present in the device tree.
Well I believe it does and actually I think CI currently checks this.The config node is certainly optional. But it would not support booting signed images, for example, without the public key.
Quoted 5 lines
My understanding is that the u-boot,dm-xxx tags are for SPL. It seems that for most scenarios having where there is some prior firmware that passes a device tree, SPL isn't used. That certainly is the case for QEMU, Raspberry Pi and my Apple M1 work.
Quoted 8 lines
Yes that is true and I suppose is how things are able to work at present.
But I do see QMU for RISC-V with an SPL boot, although it is only mentioned in the docs, so perhaps it is not in the CI yet. If there are few enough devices and enough memory (and you don't care about boot speed) then the u-boot,dm-xxx tags are not strictly necessary. But then we are using QEMU in a somewhat unrealistic state.
RISC-V SPL is in CI testing. See qemu_riscv{32,64}_spl targets in the u-boot/master and the recent patches for SiFive Unleashed.
Regards,
Bin
Quoted 180 lines · Bin Meng
Hi Simon,
Quoted 168 lines · Simon Glass
Hi Mark,
Quoted 148 lines · Mark Kettenis
Quoted 140 lines
From: Simon Glass <[email protected]>
Date: Sat, 28 Aug 2021 20:07:27 -0600Hi Bin,
Quoted 125 lines · Bin Meng
Hi Simon,
Quoted 113 lines · Simon Glass
Hi Bin,
Quoted 100 lines · Bin Meng
Hi Simon,
Quoted 96 lines · Simon Glass
At present some of the ideas and techniques behind devicetree in U-Boot are assumed, implied or unsaid. Add some documentation to cover how devicetree is build, how it can be modified and the rules about using the various
CONFIG_OF_... options.Signed-off-by Simon Glass <[email protected]>---
doc/develop/index.rst | 1 + doc/develop/package/devicetree.rst | 315 +++++++++++++++++++++++++++++ doc/develop/package/index.rst | 1 + 3 files changed, 317 insertions(+) create mode 100644 doc/develop/package/devicetree.rstdoc/develop/index.rst +1
-0@@ -36,6 +36,7 @@ Packaging :maxdepth: 1 package/index + package/devicetree Testing -------doc/develop/package/devicetree.rst new file +63
-0@@ -0,0 +1,315 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +Updating the devicetree +======================= + +U-Boot uses devicetree for runtime configuration and storing required blobs or +any other information it needs to operate. It is possible to update the +devicetree separately from actually building U-Boot. This provides a good degree +of control and flexibility for firmware that uses U-Boot in conjunction with +other project. + +There are many reasons why it is useful to modify the devicetree after building +it: + +- Configuration can be changed, e.g. which UART to use +- A serial number can be added +- Public keys can be added to allow image verification +- Console output can be changed (e.g. to select serial or vidconsole) + +This section describes how to work with devicetree to accomplish your goals. + +See also :doc:`../devicetree/control` for a basic summary of the available +features. + + +Devicetree source +----------------- + +Every board in U-Boot must include a devicetree sufficient to build and boot +that board on suitable hardware (or emulation). This is specified using the +`CONFIG DEFAULT_DEVICE_TREE` option. + + +Current situation (August 2021) +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +As an aside, at present U-Boot allows `CONFIG_DEFAULT_DEVICE_TREE` to be empty, +e.g. if `CONFIG_OF_BOARD` or `CONFIG_OF_PRIOR_STAGE` are used. This has +unfortunately created an enormous amount of confusion and some wasted effort. +This was not intended and this bug will be fixed soon. Specifically: + +- `CONFIG_OF_BOARD` was added in rpi_patch_ for Raspberry Pi, which does have + an in-tree devicetree, but this feature has since been used for boards that + don't +- `CONFIG_OF_PRIOR_STAGE` was added in bcm_patch_ as part of a larger Broadcom + change with a tag indicating it only affected one board, so the change in + behaviour was not noticed at the time. It has since been used by RISC-V qemu + boards. + +Once this bug is fixed, CONFIG_OF_BOARD and CONFIG_OF_PRIOR_STAGE will override +(at runtime) the devicetree suppled with U-Boot, but will otherwise use +CONFIG_OF_SEPARATE for the in-tree build. So these two will become options, +moving out of the 'choice' in `dts/Kconfig` + +Offending boards are: + +- bcm7260 +- bcm7445 +- qemu_arm64 +- qemu_arm +- qemu-ppce500 +- qemu-riscv32 +- qemu-riscv32_smodeQuoted 8 lines
doc/develop/package/devicetree.rst line 68
Quoted 5 lines
doc/develop/package/devicetree.rst new file +5
-0+- qemu-riscv64 +- qemu-riscv64_smode + +All of these need to have a devicetree added in-tree. This is targeted to be +fixed in the 2022.01 release.Do you have some idea of how to support the QEMU case, if not using
CONFIG_OF_PRIOR_STAGE?Quoted 7 lines
To be clear, I am not planning to remove this option. It will still work.
But I do want to have an in-tree devicetree for all boards, and someone will need to update qemu to support adding U-Boot nodes/properties. It always has an array of options controlling what it presents to BIOS/UEFI, for example, so this should not be too controversial.
Quoted 7 lines
I think there is some misunderstanding.
Adding U-Boot nodes/properties is not a problem for QEMU, but the thing is that these QEMU targets don't require U-Boot specific nodes/properties. It's just that QEMU will generate the DTB on the fly based on different command-line options, so the DTB is dynamic and we can't hardcode one in the U-Boot tree.
Quoted 7 lines
That's fine, but I do want some sort of sample in the tree, like we have for qemu-x86 and others. For some reason ARM and RISC-V don't have one.
Also, QEMU needs a way to add properties and nodes that are specific to U-Boot, since at present there is no way at all to pass these through (/config node, u-boot,dm-xxx tags, etc.).
Quoted 5 lines
I suppose some of the /config stuff could be nice and that the device tree is indeed the most appropriate way to pass runtime options from QEMU to U-Boot. But I'd say U-Boot should still work (with reasonable defaults) if no U-Boot specific options are present in the device tree.
Well I believe it does and actually I think CI currently checks this.The config node is certainly optional. But it would not support booting signed images, for example, without the public key.
Quoted 5 lines
My understanding is that the u-boot,dm-xxx tags are for SPL. It seems that for most scenarios having where there is some prior firmware that passes a device tree, SPL isn't used. That certainly is the case for QEMU, Raspberry Pi and my Apple M1 work.
Quoted 8 lines
Yes that is true and I suppose is how things are able to work at present.
But I do see QMU for RISC-V with an SPL boot, although it is only mentioned in the docs, so perhaps it is not in the CI yet. If there are few enough devices and enough memory (and you don't care about boot speed) then the u-boot,dm-xxx tags are not strictly necessary. But then we are using QEMU in a somewhat unrealistic state.
Quoted 2 lines
RISC-V SPL is in CI testing. See qemu_riscv{32,64}_spl targets in the u-boot/master and the recent patches for SiFive Unleashed.
The qemu cases are so that we have the SPL flow in CI, right?
Signature · 1 line
Tom
Quoted 182 lines · Tom Rini
Quoted 180 lines · Bin Meng
Hi Simon,
Quoted 176 lines · Simon Glass
Hi Mark,
Quoted 148 lines · Mark Kettenis
Quoted 140 lines
From: Simon Glass <[email protected]>
Date: Sat, 28 Aug 2021 20:07:27 -0600Hi Bin,
Quoted 125 lines · Bin Meng
Hi Simon,
Quoted 113 lines · Simon Glass
Hi Bin,
Quoted 100 lines · Bin Meng
Hi Simon,
Quoted 96 lines · Simon Glass
At present some of the ideas and techniques behind devicetree in U-Boot are assumed, implied or unsaid. Add some documentation to cover how devicetree is build, how it can be modified and the rules about using the various
CONFIG_OF_... options.Signed-off-by Simon Glass <[email protected]>---
doc/develop/index.rst | 1 + doc/develop/package/devicetree.rst | 315 +++++++++++++++++++++++++++++ doc/develop/package/index.rst | 1 + 3 files changed, 317 insertions(+) create mode 100644 doc/develop/package/devicetree.rstdoc/develop/index.rst +1
-0@@ -36,6 +36,7 @@ Packaging :maxdepth: 1 package/index + package/devicetree Testing -------doc/develop/package/devicetree.rst new file +63
-0@@ -0,0 +1,315 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +Updating the devicetree +======================= + +U-Boot uses devicetree for runtime configuration and storing required blobs or +any other information it needs to operate. It is possible to update the +devicetree separately from actually building U-Boot. This provides a good degree +of control and flexibility for firmware that uses U-Boot in conjunction with +other project. + +There are many reasons why it is useful to modify the devicetree after building +it: + +- Configuration can be changed, e.g. which UART to use +- A serial number can be added +- Public keys can be added to allow image verification +- Console output can be changed (e.g. to select serial or vidconsole) + +This section describes how to work with devicetree to accomplish your goals. + +See also :doc:`../devicetree/control` for a basic summary of the available +features. + + +Devicetree source +----------------- + +Every board in U-Boot must include a devicetree sufficient to build and boot +that board on suitable hardware (or emulation). This is specified using the +`CONFIG DEFAULT_DEVICE_TREE` option. + + +Current situation (August 2021) +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +As an aside, at present U-Boot allows `CONFIG_DEFAULT_DEVICE_TREE` to be empty, +e.g. if `CONFIG_OF_BOARD` or `CONFIG_OF_PRIOR_STAGE` are used. This has +unfortunately created an enormous amount of confusion and some wasted effort. +This was not intended and this bug will be fixed soon. Specifically: + +- `CONFIG_OF_BOARD` was added in rpi_patch_ for Raspberry Pi, which does have + an in-tree devicetree, but this feature has since been used for boards that + don't +- `CONFIG_OF_PRIOR_STAGE` was added in bcm_patch_ as part of a larger Broadcom + change with a tag indicating it only affected one board, so the change in + behaviour was not noticed at the time. It has since been used by RISC-V qemu + boards. + +Once this bug is fixed, CONFIG_OF_BOARD and CONFIG_OF_PRIOR_STAGE will override +(at runtime) the devicetree suppled with U-Boot, but will otherwise use +CONFIG_OF_SEPARATE for the in-tree build. So these two will become options, +moving out of the 'choice' in `dts/Kconfig` + +Offending boards are: + +- bcm7260 +- bcm7445 +- qemu_arm64 +- qemu_arm +- qemu-ppce500 +- qemu-riscv32 +- qemu-riscv32_smodeQuoted 8 lines
doc/develop/package/devicetree.rst line 68
Quoted 5 lines
doc/develop/package/devicetree.rst new file +5
-0+- qemu-riscv64 +- qemu-riscv64_smode + +All of these need to have a devicetree added in-tree. This is targeted to be +fixed in the 2022.01 release.Do you have some idea of how to support the QEMU case, if not using
CONFIG_OF_PRIOR_STAGE?Quoted 7 lines
To be clear, I am not planning to remove this option. It will still work.
But I do want to have an in-tree devicetree for all boards, and someone will need to update qemu to support adding U-Boot nodes/properties. It always has an array of options controlling what it presents to BIOS/UEFI, for example, so this should not be too controversial.
Quoted 7 lines
I think there is some misunderstanding.
Adding U-Boot nodes/properties is not a problem for QEMU, but the thing is that these QEMU targets don't require U-Boot specific nodes/properties. It's just that QEMU will generate the DTB on the fly based on different command-line options, so the DTB is dynamic and we can't hardcode one in the U-Boot tree.
Quoted 7 lines
That's fine, but I do want some sort of sample in the tree, like we have for qemu-x86 and others. For some reason ARM and RISC-V don't have one.
Also, QEMU needs a way to add properties and nodes that are specific to U-Boot, since at present there is no way at all to pass these through (/config node, u-boot,dm-xxx tags, etc.).
Quoted 5 lines
I suppose some of the /config stuff could be nice and that the device tree is indeed the most appropriate way to pass runtime options from QEMU to U-Boot. But I'd say U-Boot should still work (with reasonable defaults) if no U-Boot specific options are present in the device tree.
Well I believe it does and actually I think CI currently checks this.The config node is certainly optional. But it would not support booting signed images, for example, without the public key.
Quoted 5 lines
My understanding is that the u-boot,dm-xxx tags are for SPL. It seems that for most scenarios having where there is some prior firmware that passes a device tree, SPL isn't used. That certainly is the case for QEMU, Raspberry Pi and my Apple M1 work.
Yes that is true and I suppose is how things are able to work at present.
But I do see QMU for RISC-V with an SPL boot, although it is only mentioned in the docs, so perhaps it is not in the CI yet. If there are few enough devices and enough memory (and you don't care about boot speed) then the u-boot,dm-xxx tags are not strictly necessary. But then we are using QEMU in a somewhat unrealistic state.
Quoted 4 lines
Quoted 2 lines
RISC-V SPL is in CI testing. See qemu_riscv{32,64}_spl targets in the u-boot/master and the recent patches for SiFive Unleashed.
The qemu cases are so that we have the SPL flow in CI, right?
Yes, for both QEMU-as-QEMU case and QEMU-as-hardware.
Regards,
Bin
Hi,
Quoted 182 lines · Tom Rini
Quoted 180 lines · Bin Meng
Hi Simon,
Quoted 176 lines · Simon Glass
Hi Mark,
Quoted 148 lines · Mark Kettenis
Quoted 140 lines
From: Simon Glass <[email protected]>
Date: Sat, 28 Aug 2021 20:07:27 -0600Hi Bin,
Quoted 125 lines · Bin Meng
Hi Simon,
Quoted 113 lines · Simon Glass
Hi Bin,
Quoted 100 lines · Bin Meng
Hi Simon,
Quoted 96 lines · Simon Glass
At present some of the ideas and techniques behind devicetree in U-Boot are assumed, implied or unsaid. Add some documentation to cover how devicetree is build, how it can be modified and the rules about using the various
CONFIG_OF_... options.Signed-off-by Simon Glass <[email protected]>---
doc/develop/index.rst | 1 + doc/develop/package/devicetree.rst | 315 +++++++++++++++++++++++++++++ doc/develop/package/index.rst | 1 + 3 files changed, 317 insertions(+) create mode 100644 doc/develop/package/devicetree.rstdoc/develop/index.rst +1
-0@@ -36,6 +36,7 @@ Packaging :maxdepth: 1 package/index + package/devicetree Testing -------doc/develop/package/devicetree.rst new file +63
-0@@ -0,0 +1,315 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +Updating the devicetree +======================= + +U-Boot uses devicetree for runtime configuration and storing required blobs or +any other information it needs to operate. It is possible to update the +devicetree separately from actually building U-Boot. This provides a good degree +of control and flexibility for firmware that uses U-Boot in conjunction with +other project. + +There are many reasons why it is useful to modify the devicetree after building +it: + +- Configuration can be changed, e.g. which UART to use +- A serial number can be added +- Public keys can be added to allow image verification +- Console output can be changed (e.g. to select serial or vidconsole) + +This section describes how to work with devicetree to accomplish your goals. + +See also :doc:`../devicetree/control` for a basic summary of the available +features. + + +Devicetree source +----------------- + +Every board in U-Boot must include a devicetree sufficient to build and boot +that board on suitable hardware (or emulation). This is specified using the +`CONFIG DEFAULT_DEVICE_TREE` option. + + +Current situation (August 2021) +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +As an aside, at present U-Boot allows `CONFIG_DEFAULT_DEVICE_TREE` to be empty, +e.g. if `CONFIG_OF_BOARD` or `CONFIG_OF_PRIOR_STAGE` are used. This has +unfortunately created an enormous amount of confusion and some wasted effort. +This was not intended and this bug will be fixed soon. Specifically: + +- `CONFIG_OF_BOARD` was added in rpi_patch_ for Raspberry Pi, which does have + an in-tree devicetree, but this feature has since been used for boards that + don't +- `CONFIG_OF_PRIOR_STAGE` was added in bcm_patch_ as part of a larger Broadcom + change with a tag indicating it only affected one board, so the change in + behaviour was not noticed at the time. It has since been used by RISC-V qemu + boards. + +Once this bug is fixed, CONFIG_OF_BOARD and CONFIG_OF_PRIOR_STAGE will override +(at runtime) the devicetree suppled with U-Boot, but will otherwise use +CONFIG_OF_SEPARATE for the in-tree build. So these two will become options, +moving out of the 'choice' in `dts/Kconfig` + +Offending boards are: + +- bcm7260 +- bcm7445 +- qemu_arm64 +- qemu_arm +- qemu-ppce500 +- qemu-riscv32 +- qemu-riscv32_smodeQuoted 8 lines
doc/develop/package/devicetree.rst line 68
Quoted 5 lines
doc/develop/package/devicetree.rst new file +5
-0+- qemu-riscv64 +- qemu-riscv64_smode + +All of these need to have a devicetree added in-tree. This is targeted to be +fixed in the 2022.01 release.Do you have some idea of how to support the QEMU case, if not using
CONFIG_OF_PRIOR_STAGE?Quoted 7 lines
To be clear, I am not planning to remove this option. It will still work.
But I do want to have an in-tree devicetree for all boards, and someone will need to update qemu to support adding U-Boot nodes/properties. It always has an array of options controlling what it presents to BIOS/UEFI, for example, so this should not be too controversial.
Quoted 7 lines
I think there is some misunderstanding.
Adding U-Boot nodes/properties is not a problem for QEMU, but the thing is that these QEMU targets don't require U-Boot specific nodes/properties. It's just that QEMU will generate the DTB on the fly based on different command-line options, so the DTB is dynamic and we can't hardcode one in the U-Boot tree.
Quoted 7 lines
That's fine, but I do want some sort of sample in the tree, like we have for qemu-x86 and others. For some reason ARM and RISC-V don't have one.
Also, QEMU needs a way to add properties and nodes that are specific to U-Boot, since at present there is no way at all to pass these through (/config node, u-boot,dm-xxx tags, etc.).
Quoted 5 lines
I suppose some of the /config stuff could be nice and that the device tree is indeed the most appropriate way to pass runtime options from QEMU to U-Boot. But I'd say U-Boot should still work (with reasonable defaults) if no U-Boot specific options are present in the device tree.
Well I believe it does and actually I think CI currently checks this.The config node is certainly optional. But it would not support booting signed images, for example, without the public key.
Quoted 5 lines
My understanding is that the u-boot,dm-xxx tags are for SPL. It seems that for most scenarios having where there is some prior firmware that passes a device tree, SPL isn't used. That certainly is the case for QEMU, Raspberry Pi and my Apple M1 work.
Yes that is true and I suppose is how things are able to work at present.
But I do see QMU for RISC-V with an SPL boot, although it is only mentioned in the docs, so perhaps it is not in the CI yet. If there are few enough devices and enough memory (and you don't care about boot speed) then the u-boot,dm-xxx tags are not strictly necessary. But then we are using QEMU in a somewhat unrealistic state.
Quoted 4 lines
Quoted 2 lines
RISC-V SPL is in CI testing. See qemu_riscv{32,64}_spl targets in the u-boot/master and the recent patches for SiFive Unleashed.
The qemu cases are so that we have the SPL flow in CI, right?
My guess is that we need to add some u-boot,dm... tags to test this properly.
Regards,
Simon
Quoted 157 lines · Simon Glass
Hi Mark,
Quoted 148 lines · Mark Kettenis
Quoted 140 lines
From: Simon Glass <[email protected]>
Date: Sat, 28 Aug 2021 20:07:27 -0600Hi Bin,
Quoted 125 lines · Bin Meng
Hi Simon,
Quoted 113 lines · Simon Glass
Hi Bin,
Quoted 100 lines · Bin Meng
Hi Simon,
Quoted 96 lines · Simon Glass
At present some of the ideas and techniques behind devicetree in U-Boot are assumed, implied or unsaid. Add some documentation to cover how devicetree is build, how it can be modified and the rules about using the various
CONFIG_OF_... options.Signed-off-by Simon Glass <[email protected]>---
doc/develop/index.rst | 1 + doc/develop/package/devicetree.rst | 315 +++++++++++++++++++++++++++++ doc/develop/package/index.rst | 1 + 3 files changed, 317 insertions(+) create mode 100644 doc/develop/package/devicetree.rstdoc/develop/index.rst +1
-0@@ -36,6 +36,7 @@ Packaging :maxdepth: 1 package/index + package/devicetree Testing -------doc/develop/package/devicetree.rst new file +63
-0@@ -0,0 +1,315 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +Updating the devicetree +======================= + +U-Boot uses devicetree for runtime configuration and storing required blobs or +any other information it needs to operate. It is possible to update the +devicetree separately from actually building U-Boot. This provides a good degree +of control and flexibility for firmware that uses U-Boot in conjunction with +other project. + +There are many reasons why it is useful to modify the devicetree after building +it: + +- Configuration can be changed, e.g. which UART to use +- A serial number can be added +- Public keys can be added to allow image verification +- Console output can be changed (e.g. to select serial or vidconsole) + +This section describes how to work with devicetree to accomplish your goals. + +See also :doc:`../devicetree/control` for a basic summary of the available +features. + + +Devicetree source +----------------- + +Every board in U-Boot must include a devicetree sufficient to build and boot +that board on suitable hardware (or emulation). This is specified using the +`CONFIG DEFAULT_DEVICE_TREE` option. + + +Current situation (August 2021) +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +As an aside, at present U-Boot allows `CONFIG_DEFAULT_DEVICE_TREE` to be empty, +e.g. if `CONFIG_OF_BOARD` or `CONFIG_OF_PRIOR_STAGE` are used. This has +unfortunately created an enormous amount of confusion and some wasted effort. +This was not intended and this bug will be fixed soon. Specifically: + +- `CONFIG_OF_BOARD` was added in rpi_patch_ for Raspberry Pi, which does have + an in-tree devicetree, but this feature has since been used for boards that + don't +- `CONFIG_OF_PRIOR_STAGE` was added in bcm_patch_ as part of a larger Broadcom + change with a tag indicating it only affected one board, so the change in + behaviour was not noticed at the time. It has since been used by RISC-V qemu + boards. + +Once this bug is fixed, CONFIG_OF_BOARD and CONFIG_OF_PRIOR_STAGE will override +(at runtime) the devicetree suppled with U-Boot, but will otherwise use +CONFIG_OF_SEPARATE for the in-tree build. So these two will become options, +moving out of the 'choice' in `dts/Kconfig` + +Offending boards are: + +- bcm7260 +- bcm7445 +- qemu_arm64 +- qemu_arm +- qemu-ppce500 +- qemu-riscv32 +- qemu-riscv32_smodeQuoted 8 lines
doc/develop/package/devicetree.rst line 68
Quoted 5 lines
doc/develop/package/devicetree.rst new file +5
-0+- qemu-riscv64 +- qemu-riscv64_smode + +All of these need to have a devicetree added in-tree. This is targeted to be +fixed in the 2022.01 release.Do you have some idea of how to support the QEMU case, if not using
CONFIG_OF_PRIOR_STAGE?Quoted 7 lines
To be clear, I am not planning to remove this option. It will still work.
But I do want to have an in-tree devicetree for all boards, and someone will need to update qemu to support adding U-Boot nodes/properties. It always has an array of options controlling what it presents to BIOS/UEFI, for example, so this should not be too controversial.
Quoted 7 lines
I think there is some misunderstanding.
Adding U-Boot nodes/properties is not a problem for QEMU, but the thing is that these QEMU targets don't require U-Boot specific nodes/properties. It's just that QEMU will generate the DTB on the fly based on different command-line options, so the DTB is dynamic and we can't hardcode one in the U-Boot tree.
Quoted 7 lines
That's fine, but I do want some sort of sample in the tree, like we have for qemu-x86 and others. For some reason ARM and RISC-V don't have one.
Also, QEMU needs a way to add properties and nodes that are specific to U-Boot, since at present there is no way at all to pass these through (/config node, u-boot,dm-xxx tags, etc.).
Quoted 5 lines
I suppose some of the /config stuff could be nice and that the device tree is indeed the most appropriate way to pass runtime options from QEMU to U-Boot. But I'd say U-Boot should still work (with reasonable defaults) if no U-Boot specific options are present in the device tree.
Quoted 3 lines
Well I believe it does and actually I think CI currently checks this.The config node is certainly optional. But it would not support booting signed images, for example, without the public key.
The public key would need to be included in what's passed to us, yes?
Signature · 1 line
Tom
Hi Tom,
Quoted 159 lines · Tom Rini
Quoted 157 lines · Simon Glass
Hi Mark,
Quoted 153 lines · Mark Kettenis
Quoted 140 lines
From: Simon Glass <[email protected]>
Date: Sat, 28 Aug 2021 20:07:27 -0600Hi Bin,
Quoted 125 lines · Bin Meng
Hi Simon,
Quoted 113 lines · Simon Glass
Hi Bin,
Quoted 100 lines · Bin Meng
Hi Simon,
Quoted 96 lines · Simon Glass
At present some of the ideas and techniques behind devicetree in U-Boot are assumed, implied or unsaid. Add some documentation to cover how devicetree is build, how it can be modified and the rules about using the various
CONFIG_OF_... options.Signed-off-by Simon Glass <[email protected]>---
doc/develop/index.rst | 1 + doc/develop/package/devicetree.rst | 315 +++++++++++++++++++++++++++++ doc/develop/package/index.rst | 1 + 3 files changed, 317 insertions(+) create mode 100644 doc/develop/package/devicetree.rstdoc/develop/index.rst +1
-0@@ -36,6 +36,7 @@ Packaging :maxdepth: 1 package/index + package/devicetree Testing -------doc/develop/package/devicetree.rst new file +63
-0@@ -0,0 +1,315 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +Updating the devicetree +======================= + +U-Boot uses devicetree for runtime configuration and storing required blobs or +any other information it needs to operate. It is possible to update the +devicetree separately from actually building U-Boot. This provides a good degree +of control and flexibility for firmware that uses U-Boot in conjunction with +other project. + +There are many reasons why it is useful to modify the devicetree after building +it: + +- Configuration can be changed, e.g. which UART to use +- A serial number can be added +- Public keys can be added to allow image verification +- Console output can be changed (e.g. to select serial or vidconsole) + +This section describes how to work with devicetree to accomplish your goals. + +See also :doc:`../devicetree/control` for a basic summary of the available +features. + + +Devicetree source +----------------- + +Every board in U-Boot must include a devicetree sufficient to build and boot +that board on suitable hardware (or emulation). This is specified using the +`CONFIG DEFAULT_DEVICE_TREE` option. + + +Current situation (August 2021) +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +As an aside, at present U-Boot allows `CONFIG_DEFAULT_DEVICE_TREE` to be empty, +e.g. if `CONFIG_OF_BOARD` or `CONFIG_OF_PRIOR_STAGE` are used. This has +unfortunately created an enormous amount of confusion and some wasted effort. +This was not intended and this bug will be fixed soon. Specifically: + +- `CONFIG_OF_BOARD` was added in rpi_patch_ for Raspberry Pi, which does have + an in-tree devicetree, but this feature has since been used for boards that + don't +- `CONFIG_OF_PRIOR_STAGE` was added in bcm_patch_ as part of a larger Broadcom + change with a tag indicating it only affected one board, so the change in + behaviour was not noticed at the time. It has since been used by RISC-V qemu + boards. + +Once this bug is fixed, CONFIG_OF_BOARD and CONFIG_OF_PRIOR_STAGE will override +(at runtime) the devicetree suppled with U-Boot, but will otherwise use +CONFIG_OF_SEPARATE for the in-tree build. So these two will become options, +moving out of the 'choice' in `dts/Kconfig` + +Offending boards are: + +- bcm7260 +- bcm7445 +- qemu_arm64 +- qemu_arm +- qemu-ppce500 +- qemu-riscv32 +- qemu-riscv32_smodeQuoted 8 lines
doc/develop/package/devicetree.rst line 68
Quoted 5 lines
doc/develop/package/devicetree.rst new file +5
-0+- qemu-riscv64 +- qemu-riscv64_smode + +All of these need to have a devicetree added in-tree. This is targeted to be +fixed in the 2022.01 release.Do you have some idea of how to support the QEMU case, if not using
CONFIG_OF_PRIOR_STAGE?Quoted 7 lines
To be clear, I am not planning to remove this option. It will still work.
But I do want to have an in-tree devicetree for all boards, and someone will need to update qemu to support adding U-Boot nodes/properties. It always has an array of options controlling what it presents to BIOS/UEFI, for example, so this should not be too controversial.
Quoted 7 lines
I think there is some misunderstanding.
Adding U-Boot nodes/properties is not a problem for QEMU, but the thing is that these QEMU targets don't require U-Boot specific nodes/properties. It's just that QEMU will generate the DTB on the fly based on different command-line options, so the DTB is dynamic and we can't hardcode one in the U-Boot tree.
Quoted 7 lines
That's fine, but I do want some sort of sample in the tree, like we have for qemu-x86 and others. For some reason ARM and RISC-V don't have one.
Also, QEMU needs a way to add properties and nodes that are specific to U-Boot, since at present there is no way at all to pass these through (/config node, u-boot,dm-xxx tags, etc.).
I suppose some of the /config stuff could be nice and that the device tree is indeed the most appropriate way to pass runtime options from QEMU to U-Boot. But I'd say U-Boot should still work (with reasonable defaults) if no U-Boot specific options are present in the device tree.
Quoted 6 lines
Quoted 3 lines
Well I believe it does and actually I think CI currently checks this.The config node is certainly optional. But it would not support booting signed images, for example, without the public key.
The public key would need to be included in what's passed to us, yes?
Yes, I suggest adding a -dtsi flag or similar, to provide a DT to merge with the generated one. Then we could add a vboot test using qemu, for example, in addition to the sandbox ones.
Regards,
Simon
Quoted 153 lines · Mark Kettenis
Quoted 139 lines
From: Simon Glass <[email protected]>
Date: Sat, 28 Aug 2021 20:07:27 -0600Hi Bin,
Quoted 125 lines · Bin Meng
Hi Simon,
Quoted 113 lines · Simon Glass
Hi Bin,
Quoted 100 lines · Bin Meng
Hi Simon,
Quoted 96 lines · Simon Glass
At present some of the ideas and techniques behind devicetree in U-Boot are assumed, implied or unsaid. Add some documentation to cover how devicetree is build, how it can be modified and the rules about using the various
CONFIG_OF_... options.Signed-off-by Simon Glass <[email protected]>---
doc/develop/index.rst | 1 + doc/develop/package/devicetree.rst | 315 +++++++++++++++++++++++++++++ doc/develop/package/index.rst | 1 + 3 files changed, 317 insertions(+) create mode 100644 doc/develop/package/devicetree.rstdoc/develop/index.rst +1
-0@@ -36,6 +36,7 @@ Packaging :maxdepth: 1 package/index + package/devicetree Testing -------doc/develop/package/devicetree.rst new file +63
-0@@ -0,0 +1,315 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +Updating the devicetree +======================= + +U-Boot uses devicetree for runtime configuration and storing required blobs or +any other information it needs to operate. It is possible to update the +devicetree separately from actually building U-Boot. This provides a good degree +of control and flexibility for firmware that uses U-Boot in conjunction with +other project. + +There are many reasons why it is useful to modify the devicetree after building +it: + +- Configuration can be changed, e.g. which UART to use +- A serial number can be added +- Public keys can be added to allow image verification +- Console output can be changed (e.g. to select serial or vidconsole) + +This section describes how to work with devicetree to accomplish your goals. + +See also :doc:`../devicetree/control` for a basic summary of the available +features. + + +Devicetree source +----------------- + +Every board in U-Boot must include a devicetree sufficient to build and boot +that board on suitable hardware (or emulation). This is specified using the +`CONFIG DEFAULT_DEVICE_TREE` option. + + +Current situation (August 2021) +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +As an aside, at present U-Boot allows `CONFIG_DEFAULT_DEVICE_TREE` to be empty, +e.g. if `CONFIG_OF_BOARD` or `CONFIG_OF_PRIOR_STAGE` are used. This has +unfortunately created an enormous amount of confusion and some wasted effort. +This was not intended and this bug will be fixed soon. Specifically: + +- `CONFIG_OF_BOARD` was added in rpi_patch_ for Raspberry Pi, which does have + an in-tree devicetree, but this feature has since been used for boards that + don't +- `CONFIG_OF_PRIOR_STAGE` was added in bcm_patch_ as part of a larger Broadcom + change with a tag indicating it only affected one board, so the change in + behaviour was not noticed at the time. It has since been used by RISC-V qemu + boards. + +Once this bug is fixed, CONFIG_OF_BOARD and CONFIG_OF_PRIOR_STAGE will override +(at runtime) the devicetree suppled with U-Boot, but will otherwise use +CONFIG_OF_SEPARATE for the in-tree build. So these two will become options, +moving out of the 'choice' in `dts/Kconfig` + +Offending boards are: + +- bcm7260 +- bcm7445 +- qemu_arm64 +- qemu_arm +- qemu-ppce500 +- qemu-riscv32 +- qemu-riscv32_smodeQuoted 8 lines
doc/develop/package/devicetree.rst line 68
Quoted 5 lines
doc/develop/package/devicetree.rst new file +5
-0+- qemu-riscv64 +- qemu-riscv64_smode + +All of these need to have a devicetree added in-tree. This is targeted to be +fixed in the 2022.01 release.Do you have some idea of how to support the QEMU case, if not using
CONFIG_OF_PRIOR_STAGE?Quoted 7 lines
To be clear, I am not planning to remove this option. It will still work.
But I do want to have an in-tree devicetree for all boards, and someone will need to update qemu to support adding U-Boot nodes/properties. It always has an array of options controlling what it presents to BIOS/UEFI, for example, so this should not be too controversial.
Quoted 7 lines
I think there is some misunderstanding.
Adding U-Boot nodes/properties is not a problem for QEMU, but the thing is that these QEMU targets don't require U-Boot specific nodes/properties. It's just that QEMU will generate the DTB on the fly based on different command-line options, so the DTB is dynamic and we can't hardcode one in the U-Boot tree.
Quoted 7 lines
That's fine, but I do want some sort of sample in the tree, like we have for qemu-x86 and others. For some reason ARM and RISC-V don't have one.
Also, QEMU needs a way to add properties and nodes that are specific to U-Boot, since at present there is no way at all to pass these through (/config node, u-boot,dm-xxx tags, etc.).
I suppose some of the /config stuff could be nice and that the device tree is indeed the most appropriate way to pass runtime options from QEMU to U-Boot. But I'd say U-Boot should still work (with reasonable defaults) if no U-Boot specific options are present in the device tree.
Quoted 4 lines
My understanding is that the u-boot,dm-xxx tags are for SPL. It seems that for most scenarios having where there is some prior firmware that passes a device tree, SPL isn't used. That certainly is the case for QEMU, Raspberry Pi and my Apple M1 work.
This is key, for moving forward. We need to be able to function wholly and correctly with a device tree we are given by whatever stars "us" off. When we talk about QEMU, we need to keep in mind what QEMU is
being used for, as the use cases. I feel like QEMU-as-QEMU really is
to enable CI and perhaps enable debug/development workflows. QEMU-as-hardware (SiFive from Bin's recent patch, sabrelite that QEMU 6.1.0 supports, integrator, malta like we do today, and so on) should be "let us act like it's the real hardware". So if we're expecting a device tree to have X in it, we need to work with whatever the relevant upstreams are to have it.
Signature · 1 line
Tom