Skip to contentSkip to conversation

btrfs/ioctl.c: extent_same - Use inode as src which, close to disk beginning

RFC PATCH In review Timofey Titovets 1 participant 2 messages Oct 21, 2015 Btrfs file system

lore
Share & tools
lore
#0 lore raw

RFC PATCH v2 1/1 btrfs/ioctl.c: extent_same - Use inode as src which, close to disk beginning

It's just a proof of concept, and i hope to see feedback/ideas/review about it.
---
While deduplication,
Btrfs produce extent and file fragmentation
But it's can be optimized by compute - which inode data placed a closest to beginning of hdd It's allow to:
1. Performance boost on hdd (beginning of disk faster then end)
2. Make sparse only on tail of fs, what can give boost later for
balancing and resizing operations

New function:
static u64 btrfs_avg_disko(struct inode *inode,

                        const u64 off, const u64 olen_aligned);

It normalize offsets with data lengths, by represent it like offsets of blocks It return average data offset of all "pagesized" blocks in given range for inode Function cloned from btrfs_clone()

Changes from V1:
Added new function which compute "normal" offset

---
 fs/btrfs/ioctl.c | 147 
++++++++++++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 145 insertions(+), 2 deletions(-)
fs/btrfs/ioctl.c +145 -2
index 3e3e613..17e5313 100644
@@ -86,6 +86,9 @@ struct btrfs_ioctl_received_subvol_args_32 {
 #endif
 
 
+static u64 btrfs_avg_disko(struct inode *inode,
+                        const u64 off, const u64 olen_aligned);
+
 static int btrfs_clone(struct inode *src, struct inode *inode,
                u64 off, u64 olen, u64 olen_aligned, u64 destoff,
                int no_time_update);
@@ -3074,8 +3077,20 @@ static int btrfs_extent_same(struct inode *src, u64 loff, u64 olen,
 
     /* pass original length for comparison so we stay within i_size */
     ret = btrfs_cmp_data(src, loff, dst, dst_loff, olen, &cmp);
-    if (ret == 0)
-        ret = btrfs_clone(src, dst, loff, olen, len, dst_loff, 1);
+    if (ret == 0) {
+        /* prefer inode with lowest offset as source for clone*/
+        u64 src_weight;
+        u64 dst_weight;
+        src_weight = btrfs_avg_disko(src, off, olen);
+        dst_weight = btrfs_avg_disko(dest, dst_loff, olen);
+        /* if one of weight == 0 -> fallback */
+        if (dest_weight == 0)
+            src_weight = 0;
+        if (src_weight > dest_weight)
+            ret = btrfs_clone(dst, src, dst_loff, olen, len, loff, 1);
+        else
+            ret = btrfs_clone(src, dst, loff, olen, len, dst_loff, 1);
+    }
 
     if (same_inode)
         unlock_extent(&BTRFS_I(src)->io_tree, same_lock_start,
@@ -3329,6 +3344,134 @@ static void clone_update_extent_map(struct inode *inode,
 }
 
 /**
+ * btrfs_avg_disko() - return avg data offset weight for inode
+ *
+ * @inode: Inode
+ * @off: Offset for computing
+ * @olen_aligned: Block-aligned len of data
+ *
+ * Computing avg address place of data, allow to heuristically
+ * determine where on the disk placed most fragment of data
+ */
+static u64 btrfs_avg_disko(struct inode *inode,
+                    const u64 off, const u64 olen_aligned)
+{
+    struct btrfs_root *root = BTRFS_I(inode)->root;
+    struct btrfs_path *path = NULL;
+    struct extent_buffer *leaf;
+    char *buf = NULL;
+    struct btrfs_key key;
+    u32 nritems;
+    int slot;
+    int no_quota;
+    double sum = 0;
+    u64 ret = 0;
+    u64 counter = 0;
+
+    buf = vmalloc(root->nodesize);
+    if (!buf)
+        return ret;
+
+    path = btrfs_alloc_path();
+    if (!path) {
+        vfree(buf);
+        return ret;
+    }
+
+    path->reada = 2;
+    /* clone data */
+    key.objectid = btrfs_ino(inode);
+    key.type = BTRFS_EXTENT_DATA_KEY;
+    key.offset = off;
+
+    while (1) {
+        u64 next_key_min_offset = key.offset + 1;
+
+        /*
+         * note the key will change type as we walk through the
+         * tree.
+         */
+        path->leave_spinning = 1;
+        ret = btrfs_search_slot(NULL, BTRFS_I(inode)->root, &key, path,    0, 0);
+        if (ret < 0)
+            goto out;
+        /*
+         * First search, if no extent item that starts at offset off was
+         * found but the previous item is an extent item, it's possible
+         * it might overlap our target range, therefore process it.
+         */
+        if (key.offset == off && ret > 0 && path->slots[0] > 0) {
+            btrfs_item_key_to_cpu(path->nodes[0], &key,
+                          path->slots[0] - 1);
+            if (key.type == BTRFS_EXTENT_DATA_KEY)
+                path->slots[0]--;
+        }
+
+        nritems = btrfs_header_nritems(path->nodes[0]);
+process_slot:
+        no_quota = 1;
+        if (path->slots[0] >= nritems) {
+            ret = btrfs_next_leaf(BTRFS_I(inode)->root, path);
+            if (ret < 0)
+                goto out;
+            if (ret > 0)
+                break;
+            nritems = btrfs_header_nritems(path->nodes[0]);
+        }
+        leaf = path->nodes[0];
+        slot = path->slots[0];
+
+        btrfs_item_key_to_cpu(leaf, &key, slot);
+        if (key.type > BTRFS_EXTENT_DATA_KEY ||
+            key.objectid != btrfs_ino(inode))
+            break;
+
+        if (key.type == BTRFS_EXTENT_DATA_KEY) {
+            struct btrfs_file_extent_item *extent;
+            int type;
+            u64 disko = 0;
+            u64 diskl = 0;
+            u64 datal = 0;
+
+            extent = btrfs_item_ptr(leaf, slot,    struct btrfs_file_extent_item);
+            type = btrfs_file_extent_type(leaf, extent);
+            if (type == BTRFS_FILE_EXTENT_REG ||
+                type == BTRFS_FILE_EXTENT_PREALLOC) {
+                disko = btrfs_file_extent_disk_bytenr(leaf, extent);
+                diskl = btrfs_file_extent_disk_num_bytes(leaf, extent);
+                datal = btrfs_file_extent_num_bytes(leaf, extent);
+            }
+
+            /*
+             * The first search might have left us at an extent
+             * item that ends before our target range's start, can
+             * happen if we have holes and NO_HOLES feature enabled.
+             */
+            if (key.offset + datal <= off) {
+                path->slots[0]++;
+                goto process_slot;
+            } else if (key.offset >= off + olen_aligned) {
+                break;
+            }
+            next_key_min_offset = key.offset + datal;
+
+            for (;diskl >= 0; diskl -= pagesize) {
+                sum += disko+diskl;
+                counter++;
+            }
+
+            btrfs_release_path(path);
+            path->leave_spinning = 0;
+    }
+
+out:
+    ret = sum/counter;
+    btrfs_free_path(path);
+    vfree(buf);
+    return ret;
+}
+
+/**
  * btrfs_clone() - clone a range from inode file to another
  *
  * @src: Inode to clone from
Signature · 1 line
2.6.1
Quoted 1 line

From 0fcd8c8f03064b9d7ed89606f3eff65ffc53cbf5 Mon Sep 17 00:00:00 2001

From: Timofey Titovets <[email protected]>
Date: Wed, 21 Oct 2015 04:10:13 +0300
Subject: [RFC PATCH V2] btrfs/ioctl.c: extent_same - Use inode as src which
close to disk beginning

While deduplication,
Btrfs produce extent and file fragmentation
But it's can be optimized by compute - which inode data placed a closest to beginning of hdd It's allow to:
1. Performance boost on hdd (beginning of disk faster then end)
2. Make sparse only on tail of fs, what can give boost later for
balancing and resizing operations

New function:
static u64 btrfs_avg_disko(struct inode *inode,

                        const u64 off, const u64 olen_aligned);

It normalize offsets with data lenghts, by represent it like offsets of blocks It return average data offset of all "pagesized" blocks in given range for inode

---
 fs/btrfs/ioctl.c | 147 ++++++++++++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 145 insertions(+), 2 deletions(-)
fs/btrfs/ioctl.c +145 -2

165 lines not on this page · raw message

Signature · 1 line
2.6.1
#1 lore raw

This patch have LOT of errors, sorry, please ignore it.

2015-10-21 4:11 GMT+03:00 Timofey Titovets <[email protected]>:

Quoted 211 lines

It's just a proof of concept, and i hope to see feedback/ideas/review about it.
---
While deduplication,
Btrfs produce extent and file fragmentation
But it's can be optimized by compute - which inode data placed a closest to beginning of hdd
It's allow to:
1. Performance boost on hdd (beginning of disk faster then end)
2. Make sparse only on tail of fs, what can give boost later for balancing and resizing operations

New function:
static u64 btrfs_avg_disko(struct inode *inode,

                        const u64 off, const u64 olen_aligned);

It normalize offsets with data lengths, by represent it like offsets of blocks
It return average data offset of all "pagesized" blocks in given range for inode
Function cloned from btrfs_clone()

Changes from V1:
Added new function which compute "normal" offset

---
 fs/btrfs/ioctl.c | 147
++++++++++++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 145 insertions(+), 2 deletions(-)
fs/btrfs/ioctl.c +17 -2
index 3e3e613..17e5313 100644
@@ -86,6 +86,9 @@ struct btrfs_ioctl_received_subvol_args_32 {
 #endif
 
 
+static u64 btrfs_avg_disko(struct inode *inode,
+                        const u64 off, const u64 olen_aligned);
+
 static int btrfs_clone(struct inode *src, struct inode *inode,
                u64 off, u64 olen, u64 olen_aligned, u64 destoff,
                int no_time_update);
@@ -3074,8 +3077,20 @@ static int btrfs_extent_same(struct inode *src, u64
 loff, u64 olen,
 
     /* pass original length for comparison so we stay within i_size */
     ret = btrfs_cmp_data(src, loff, dst, dst_loff, olen, &cmp);
-    if (ret == 0)
-        ret = btrfs_clone(src, dst, loff, olen, len, dst_loff, 1);
+    if (ret == 0) {
+        /* prefer inode with lowest offset as source for clone*/
+        u64 src_weight;
+        u64 dst_weight;
+        src_weight = btrfs_avg_disko(src, off, olen);
+        dst_weight = btrfs_avg_disko(dest, dst_loff, olen);
+        /* if one of weight == 0 -> fallback */
+        if (dest_weight == 0)
+            src_weight = 0;
+        if (src_weight > dest_weight)
+            ret = btrfs_clone(dst, src, dst_loff, olen, len, loff, 1);
+        else
+            ret = btrfs_clone(src, dst, loff, olen, len, dst_loff, 1);
+    }
 
     if (same_inode)
         unlock_extent(&BTRFS_I(src)->io_tree, same_lock_start,
fs/btrfs/ioctl.c +128 -0
@@ -3329,6 +3344,134 @@ static void clone_update_extent_map(struct inode
 *inode,
 }
 
 /**
+ * btrfs_avg_disko() - return avg data offset weight for inode
+ *
+ * @inode: Inode
+ * @off: Offset for computing
+ * @olen_aligned: Block-aligned len of data
+ *
+ * Computing avg address place of data, allow to heuristically
+ * determine where on the disk placed most fragment of data
+ */
+static u64 btrfs_avg_disko(struct inode *inode,
+                    const u64 off, const u64 olen_aligned)
+{
+    struct btrfs_root *root = BTRFS_I(inode)->root;
+    struct btrfs_path *path = NULL;
+    struct extent_buffer *leaf;
+    char *buf = NULL;
+    struct btrfs_key key;
+    u32 nritems;
+    int slot;
+    int no_quota;
+    double sum = 0;
+    u64 ret = 0;
+    u64 counter = 0;
+
+    buf = vmalloc(root->nodesize);
+    if (!buf)
+        return ret;
+
+    path = btrfs_alloc_path();
+    if (!path) {
+        vfree(buf);
+        return ret;
+    }
+
+    path->reada = 2;
+    /* clone data */
+    key.objectid = btrfs_ino(inode);
+    key.type = BTRFS_EXTENT_DATA_KEY;
+    key.offset = off;
+
+    while (1) {
+        u64 next_key_min_offset = key.offset + 1;
+
+        /*
+         * note the key will change type as we walk through the
+         * tree.
+         */
+        path->leave_spinning = 1;
+        ret = btrfs_search_slot(NULL, BTRFS_I(inode)->root, &key, path,
 0, 0);
+        if (ret < 0)
+            goto out;
+        /*
+         * First search, if no extent item that starts at offset off was
+         * found but the previous item is an extent item, it's possible
+         * it might overlap our target range, therefore process it.
+         */
+        if (key.offset == off && ret > 0 && path->slots[0] > 0) {
+            btrfs_item_key_to_cpu(path->nodes[0], &key,
+                          path->slots[0] - 1);
+            if (key.type == BTRFS_EXTENT_DATA_KEY)
+                path->slots[0]--;
+        }
+
+        nritems = btrfs_header_nritems(path->nodes[0]);
+process_slot:
+        no_quota = 1;
+        if (path->slots[0] >= nritems) {
+            ret = btrfs_next_leaf(BTRFS_I(inode)->root, path);
+            if (ret < 0)
+                goto out;
+            if (ret > 0)
+                break;
+            nritems = btrfs_header_nritems(path->nodes[0]);
+        }
+        leaf = path->nodes[0];
+        slot = path->slots[0];
+
+        btrfs_item_key_to_cpu(leaf, &key, slot);
+        if (key.type > BTRFS_EXTENT_DATA_KEY ||
+            key.objectid != btrfs_ino(inode))
+            break;
+
+        if (key.type == BTRFS_EXTENT_DATA_KEY) {
+            struct btrfs_file_extent_item *extent;
+            int type;
+            u64 disko = 0;
+            u64 diskl = 0;
+            u64 datal = 0;
+
+            extent = btrfs_item_ptr(leaf, slot,    struct
 btrfs_file_extent_item);
+            type = btrfs_file_extent_type(leaf, extent);
+            if (type == BTRFS_FILE_EXTENT_REG ||
+                type == BTRFS_FILE_EXTENT_PREALLOC) {
+                disko = btrfs_file_extent_disk_bytenr(leaf, extent);
+                diskl = btrfs_file_extent_disk_num_bytes(leaf, extent);
+                datal = btrfs_file_extent_num_bytes(leaf, extent);
+            }
+
+            /*
+             * The first search might have left us at an extent
+             * item that ends before our target range's start, can
+             * happen if we have holes and NO_HOLES feature enabled.
+             */
+            if (key.offset + datal <= off) {
+                path->slots[0]++;
+                goto process_slot;
+            } else if (key.offset >= off + olen_aligned) {
+                break;
+            }
+            next_key_min_offset = key.offset + datal;
+
+            for (;diskl >= 0; diskl -= pagesize) {
+                sum += disko+diskl;
+                counter++;
+            }
+
+            btrfs_release_path(path);
+            path->leave_spinning = 0;
+    }
+
+out:
+    ret = sum/counter;
+    btrfs_free_path(path);
+    vfree(buf);
+    return ret;
+}
+
+/**

* btrfs_clone() - clone a range from inode file to another *
* @src: Inode to clone from
--
2.6.1

Signature · 2 lines
Have a nice day,
Timofey.