Skip to contentSkip to conversation

QCA 4x4 board.bin issues.

DISCUSSION Ben Greear 2 participants 3 messages Oct 23, 2015 Qualcomm Atheros ATH10K wireless driver

lore
Share & tools
lore

Ben Greear

author
#0 lore raw

Hello!

I'm trying to bring up a qca99x0 NIC from Compex, based on CUS239 from what I can tell, on today's ath.git and stock firmware from ath10k-firmware tree.

I tried naming the boardData_AR900B_CUS239_5G_v2_001.bin to board-2.bin but it evidently has bad magic.

Should it actually be board-2.bin, or named something differently?

Thanks,
Ben

Signature · 8 lines
Ben Greear <[email protected]>
Candela Technologies Inc  http://www.candelatech.com


_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
#1 lore raw
Quoted 7 lines · Ben Greear

I'm trying to bring up a qca99x0 NIC from Compex, based on CUS239 from what I can tell, on today's ath.git and stock firmware from ath10k-firmware tree.

I tried naming the boardData_AR900B_CUS239_5G_v2_001.bin to board-2.bin but it evidently has bad magic.

Should it actually be board-2.bin, or named something differently?

It should be named as board.bin. I haven't uploaded board-2.bin for QCA99X0 yet, but should do that soon. With board-2.bin everything should happen just automatically.

Signature · 6 lines
Kalle Valo

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
author
#2 lore raw
Quoted 5 lines · Kalle Valo
Quoted 3 lines · Ben Greear

I'm trying to bring up a qca99x0 NIC from Compex, based on CUS239 from what I can tell, on today's ath.git and stock firmware from ath10k-firmware tree.

Quoted 8 lines
Quoted 4 lines

I tried naming the boardData_AR900B_CUS239_5G_v2_001.bin to board-2.bin but it evidently has bad magic.

Should it actually be board-2.bin, or named something differently?

It should be named as board.bin. I haven't uploaded board-2.bin for QCA99X0 yet, but should do that soon. With board-2.bin everything should happen just automatically.

Thanks, that seems to do the trick.

I've a wlan2 to play with now...will see how it actually works.

Thanks,
Ben

Signature · 8 lines
Ben Greear <[email protected]>
Candela Technologies Inc  http://www.candelatech.com


_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k