atakbd_keycode
In drivers/input/keyboard/atakbd.c, the array atakbd_keycode is initialized like this:
[41] = KEY_BACKSLASH, /* FIXME, '#' */ [43] = KEY_GRAVE, /* FIXME: '~' */
Shouldn't that be the other way round? According to the Profibuch, on a US Atari keyboard the key which sends scancode 41 is the '`' key and the scancode 43 is sent by the '\' key. On a German keyboard, these are the '#' and '~' keys, resp.
Andreas.
Signature · 3 lines
Andreas Schwab, [email protected] GPG Key fingerprint = 58CA 54C7 6D53 942B 1756 01D3 44D5 214B 8276 4ED5 "And now for something completely different."
Andreas,
you're certainly right there - I used the German keyboard to figure out the mapping (that's where the FIXMEs are from) and must have looked at a PC keyboard for some of the DE-US translation.
Thanks for spotting this. I'll better double check the entire keymap before preparing a patch ...
Cheers,
Michael
Am 25.10.15 um 02:35 schrieb Andreas Schwab:
Quoted 13 lines
In
drivers/input/keyboard/atakbd.c, the arrayatakbd_keycodeis initialized like this:[41] = KEY_BACKSLASH, /* FIXME, '#' */ [43] = KEY_GRAVE, /* FIXME: '~' */Shouldn't that be the other way round? According to the Profibuch, on a US Atari keyboard the key which sends scancode 41 is the '`' key and the scancode 43 is sent by the '\' key. On a German keyboard, these are the '#' and '~' keys, resp.
Andreas.