Duplicate htu21 drivers
Hi,
commit 2b5c53d2c958 ("Add htu21 meas-spec driver support") introduced a new implementation of the htu21 driver into drivers/iio/humidity. At first glance, it provides the same features as drivers/hwmon/htu21 with a different sysfs interface. What is the plan with these two drivers? Will the iio driver replace the hwmon one? At a minimum, they should conflict in kconfig, because module names must be unique.
Thanks,
Michal
_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
A message that is not in the archive (sent off-list or not yet received): [email protected]
Dne 28.10.2015 v 11:52 [email protected] napsal(a):
Quoted 7 lines
Hello Michal,
the plan discussed with Jonathan and Guenter was to remove the driver in hwmon once the iio one was introduced.
Should I provide a patch in
Kconfigto make them conflict as of now ?
Then you can either execute your plan :), or make the hwmon driver depend on HTU21=n.
Michal
Quoted 2 lines · On Wed, Oct 28, 2015 at 12:53:12PM +0100, [email protected]…
I was not sure about the timing for the plan … :)
Now that the patch has been approved for IIO, then indeed I can remove the patch for htu21 in hwmon.
Yes, the driver in hwmon needs to be removed. Patch welcome.
Guenter
Quoted 25 lines
Thanks,
LudovicQuoted 19 lines · Michal Marek
Dne 28.10.2015 v 11:52 [email protected] napsal(a):
Quoted 7 lines
Hello Michal,
the plan discussed with Jonathan and Guenter was to remove the driver in hwmon once the iio one was introduced.
Should I provide a patch in
Kconfigto make them conflict as of now ?Then you can either execute your plan :), or make the hwmon driver depend on HTU21=n.
Michal
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html