Skip to contentSkip to conversation

board: ti: beagle_x15: Reused to support am57xx_evm

PATCH New Steve Kipisz 4 participants 7 messages Oct 28, 2015 – Nov 18, 2015 Arm (32-bit)

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 board: ti: beagle_x15: Reused to support am57xx_evm

Rename the beagle_x15 directory to am57xx to support TI EVMs that use the AM57xx processor. By doing this we have common code reuse. There will be multiple TI EVMs that use the same code base.

This will cause changes in build procedures for existing beagleboard-x15 users.

This is in perparation for follow on patches that will introduce support for follow on TI EVMs.

Information about the TI AM57xx EVM can be found here
http://www.ti.com/tool/tmdxevm5728

For now, we did turn off CONFIG_DM and CONFIG_DEFAULT_DEVICE_TREE as we are expecting to add additional boards shortly.

---
 arch/arm/cpu/armv7/omap5/Kconfig               |  6 +++---
 board/ti/{beagle_x15 => am57xx}/Kconfig        |  6 +++---
 board/ti/am57xx/MAINTAINERS                    |  6 ++++++
 board/ti/{beagle_x15 => am57xx}/Makefile       |  0
 board/ti/{beagle_x15 => am57xx}/board.c        |  0
 board/ti/{beagle_x15 => am57xx}/mux_data.h     |  0
 board/ti/beagle_x15/MAINTAINERS                |  6 ------
 configs/am57xx_evm_defconfig                   | 13 +------------
 configs/beagle_x15_defconfig                   |  8 --------
 include/configs/{beagle_x15.h => am57xx_evm.h} |  6 +++---
 10 files changed, 16 insertions(+), 35 deletions(-)
 rename board/ti/{beagle_x15 => am57xx}/Kconfig (55%)
 create mode 100644 board/ti/am57xx/MAINTAINERS
 rename board/ti/{beagle_x15 => am57xx}/Makefile (100%)
 rename board/ti/{beagle_x15 => am57xx}/board.c (100%)
 rename board/ti/{beagle_x15 => am57xx}/mux_data.h (100%)
 delete mode 100644 board/ti/beagle_x15/MAINTAINERS
 delete mode 100644 configs/beagle_x15_defconfig
 rename include/configs/{beagle_x15.h => am57xx_evm.h} (96%)
arch/arm/cpu/armv7/omap5/Kconfig +3 -3
index 20c3bd9..7734c50 100644
@@ -13,8 +13,8 @@ config TARGET_OMAP5_UEVM
 config TARGET_DRA7XX_EVM
 	bool "TI DRA7XX"
 
-config TARGET_BEAGLE_X15
-	bool "BeagleBoard X15"
+config TARGET_AM57XX_EVM
+	bool "TI AM57XX EVM board"
 
 endchoice
 
@@ -24,6 +24,6 @@ config SYS_SOC
 source "board/compulab/cm_t54/Kconfig"
 source "board/ti/omap5_uevm/Kconfig"
 source "board/ti/dra7xx/Kconfig"
-source "board/ti/beagle_x15/Kconfig"
+source "board/ti/am57xx/Kconfig"
 
 endif
board/ti/am57xx/Kconfig renamed from board/ti/beagle_x15/Kconfig +3 -3
similarity index 55%
rename from board/ti/beagle_x15/Kconfig
rename to board/ti/am57xx/Kconfig
index a305ff1..0302dad 100644
@@ -1,12 +1,12 @@
-if TARGET_BEAGLE_X15
+if TARGET_AM57XX_EVM
 
 config SYS_BOARD
-	default "beagle_x15"
+	default "am57xx"
 
 config SYS_VENDOR
 	default "ti"
 
 config SYS_CONFIG_NAME
-	default "beagle_x15"
+	default "am57xx_evm"
 
 endif
board/ti/am57xx/MAINTAINERS new file +6 -0
new file mode 100644
index 0000000..d0bb67a
@@ -0,0 +1,6 @@
+AM57XX EVM
+M:	Felipe Balbi <[email protected]>
+S:	Maintained
+F:	board/ti/iam57xx_evm/
+F:	include/configs/am57xx_evm.h
+F:	configs/am57xx_evm_defconfig
board/ti/am57xx/Makefile renamed from board/ti/beagle_x15/Makefile +0 -0
similarity index 100%
rename from board/ti/beagle_x15/Makefile
rename to board/ti/am57xx/Makefile
board/ti/am57xx/board.c renamed from board/ti/beagle_x15/board.c +0 -0
similarity index 100%
rename from board/ti/beagle_x15/board.c
rename to board/ti/am57xx/board.c
board/ti/am57xx/mux_data.h renamed from board/ti/beagle_x15/mux_data.h +0 -0
similarity index 100%
rename from board/ti/beagle_x15/mux_data.h
rename to board/ti/am57xx/mux_data.h
board/ti/beagle_x15/MAINTAINERS deleted +0 -6
deleted file mode 100644
index 3f84def..0000000
@@ -1,6 +0,0 @@
-BEAGLE X15
-M:	Felipe Balbi <[email protected]>
-S:	Maintained
-F:	board/ti/beagle_x15/
-F:	include/configs/beagle_x15.h
-F:	configs/beagle_x15_defconfig
configs/am57xx_evm_defconfig +1 -12
index f6566bf..7573246 100644
@@ -1,19 +1,8 @@
 CONFIG_ARM=y
 CONFIG_OMAP54XX=y
-CONFIG_TARGET_BEAGLE_X15=y
-CONFIG_DEFAULT_DEVICE_TREE="am57xx-beagle-x15"
+CONFIG_TARGET_AM57XX_EVM=y
 CONFIG_SPL=y
-CONFIG_SPL_STACK_R=y
-CONFIG_SPL_STACK_R_ADDR=0x82000000
 CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=3"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_SETEXPR is not set
-# CONFIG_CMD_NFS is not set
-CONFIG_OF_CONTROL=y
-CONFIG_DM=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_BAR=y
-CONFIG_DM_GPIO=y
-CONFIG_DM_SERIAL=y
-CONFIG_DM_MMC=y
configs/beagle_x15_defconfig deleted +0 -8
deleted file mode 100644
index 3b3c027..0000000
@@ -1,8 +0,0 @@
-CONFIG_ARM=y
-CONFIG_OMAP54XX=y
-CONFIG_TARGET_BEAGLE_X15=y
-CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=3"
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_FLASH is not set
-# CONFIG_CMD_SETEXPR is not set
include/configs/am57xx_evm.h renamed from include/configs/beagle_x15.h +3 -3
similarity index 96%
rename from include/configs/beagle_x15.h
rename to include/configs/am57xx_evm.h
index d38b7b5..6308cab 100644
@@ -9,8 +9,8 @@
  * SPDX-License-Identifier:	GPL-2.0+
  */
 
-#ifndef __CONFIG_BEAGLE_X15_H
-#define __CONFIG_BEAGLE_X15_H
+#ifndef __CONFIG_AM57XX_EVM_H
+#define __CONFIG_AM57XX_EVM_H
 
 #define CONFIG_AM57XX
 
@@ -88,4 +88,4 @@
 #define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
 						CONFIG_SYS_SCSI_MAX_LUN)
 
-#endif /* __CONFIG_BEAGLE_X5_H */
+#endif /* __CONFIG_AM57XX_EVM_H */
Signature · 1 line
1.9.1
#1 lore raw

PATCH 1/1 board: ti: beagle_x15: Reused to support am57xx_evm

On 10/28/2015 04:24 PM, Steve Kipisz wrote:
[...]

Quoted 2 lines

For now, we did turn off CONFIG_DM and CONFIG_DEFAULT_DEVICE_TREE as we are expecting to add additional boards shortly.

[...]

configs/am57xx_evm_defconfig line 4

Quoted 9 lines
configs/am57xx_evm_defconfig +0 -2
index f6566bf..7573246 100644
@@ -1,19 +1,8 @@
 CONFIG_ARM=y
 CONFIG_OMAP54XX=y
-CONFIG_TARGET_BEAGLE_X15=y
-CONFIG_DEFAULT_DEVICE_TREE="am57xx-beagle-x15"

NAK. While I do agree to the rename to encompass the platform better, I disagree to disable DM and device tree for x15 - neither of which should necessary for the rename.

Signature · 2 lines
Regards,
Nishanth Menon
#2 lore raw

PATCH 1/1 board: ti: beagle_x15: Reused to support am57xx_evm

Quoted 7 lines · Nishanth Menon

On 10/28/2015 04:24 PM, Steve Kipisz wrote:
[...]

Quoted 2 lines

For now, we did turn off CONFIG_DM and CONFIG_DEFAULT_DEVICE_TREE as we are expecting to add additional boards shortly.

[...]

Quoted 13 lines

configs/am57xx_evm_defconfig line 4

Quoted 9 lines
configs/am57xx_evm_defconfig +0 -2
index f6566bf..7573246 100644
@@ -1,19 +1,8 @@
 CONFIG_ARM=y
 CONFIG_OMAP54XX=y
-CONFIG_TARGET_BEAGLE_X15=y
-CONFIG_DEFAULT_DEVICE_TREE="am57xx-beagle-x15"

NAK. While I do agree to the rename to encompass the platform better, I disagree to disable DM and device tree for x15 - neither of which should necessary for the rename.

There's two sides to this. Do we want to go with starting out with N binaries for N platforms (so DM+DT+N defconfigs, but yes, it's u-boot.bin + dt cat'd on the end...). Or do we want to go non-DM+DT and multiple in one binary until we sort out and then implement something that lets do multiple DTs?

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20151029/d2f23a8a/attachment.sig>
#3 lore raw

PATCH v2 1/1 board: ti: beagle_x15: Rename to indicate support for TI am57xx evms

In reply to Steve Kipisz

BeagleBoard X15 (http://beagleboard.org/x15) support in u-boot does actually support two different platform configuration offered by TI. In addition to BeagleBoard X15, it also supports the TMDXEVM5728 (or more commonly known as AM5728-evm).

Information about the TI AM57xx EVM can be found here
http://www.ti.com/tool/tmdxevm5728

The EVM configuration is 1-1 compatible with BeagleBoard X15 with the additional support for mPCIe, mSATA, LCD, touchscreen, Camera, push button and TI's wlink8 offering.

Hence, we rename the beagle_x15 directory to am57xx to support TI EVMs that use the AM57xx processor. By doing this we have common code reuse. This sets the stage to have a common u-boot image solution for multiple TI EVMs such as that already done for am335x and am437x. This sets the stage for upcoming multiple TI EVMs that share the same code base.

NOTE: Commit eae7ae185335 ("am437x: Add am57xx_evm_defconfig using CONFIG_DM") introduced DT support for beagle_x15 under am57xx_evm platform name. However, this ignored the potential confusion arising for users as a result. To prevent this, existing beagle_x15_defconfig is renamed as am57xx_evm_nodt_defconfig to denote that this is the "non device tree" configuration for the same platform. We still retain am57xx-beagle-x15.dts at this point, since we just require the common minimum dts.

As a result of this change, users should expect changes in build procedures('make am57xx_evm_nodt_defconfig' instead of 'make beagle_x15_defconfig'). Hopefully, this would be a one-time change.

---
v2 Based on:
master 677f970 common/board_f.c: modify the macro to use get_clocks() more common

Build testing: MAKEALL -s omap5 (no warnings/build errors) Boot Testing:
am57xx_evm_config: http://pastebin.ubuntu.com/13002904/
am57xx_evm_config: http://pastebin.ubuntu.com/13002955/
am57xx_evm_nodt_config: http://pastebin.ubuntu.com/13003008/

Changes in V2 (since v1):
- keep the dt version alive(going with Tom's suggestion:
http://marc.info/?l=u-boot&m=144615230220768&w=2 )
- redo commit message to be more clear
v1: http://marc.info/?t=144607224500010&r=1&w=2
(mailing list squashed original submission)

 arch/arm/cpu/armv7/omap5/Kconfig                            | 2 +-
 board/ti/{beagle_x15 => am57xx}/Kconfig                     | 4 ++--
 board/ti/am57xx/MAINTAINERS                                 | 7 +++++++
 board/ti/{beagle_x15 => am57xx}/Makefile                    | 0
 board/ti/{beagle_x15 => am57xx}/board.c                     | 0
 board/ti/{beagle_x15 => am57xx}/mux_data.h                  | 0
 board/ti/beagle_x15/MAINTAINERS                             | 6 ------
 configs/{beagle_x15_defconfig => am57xx_evm_nodt_defconfig} | 0
 include/configs/{beagle_x15.h => am57xx_evm.h}              | 6 +++---
 9 files changed, 13 insertions(+), 12 deletions(-)
 rename board/ti/{beagle_x15 => am57xx}/Kconfig (70%)
 create mode 100644 board/ti/am57xx/MAINTAINERS
 rename board/ti/{beagle_x15 => am57xx}/Makefile (100%)
 rename board/ti/{beagle_x15 => am57xx}/board.c (100%)
 rename board/ti/{beagle_x15 => am57xx}/mux_data.h (100%)
 delete mode 100644 board/ti/beagle_x15/MAINTAINERS
 rename configs/{beagle_x15_defconfig => am57xx_evm_nodt_defconfig} (100%)
 rename include/configs/{beagle_x15.h => am57xx_evm.h} (96%)
arch/arm/cpu/armv7/omap5/Kconfig +1 -1
index 20c3bd9..bfa264e 100644
@@ -24,6 +24,6 @@ config SYS_SOC
 source "board/compulab/cm_t54/Kconfig"
 source "board/ti/omap5_uevm/Kconfig"
 source "board/ti/dra7xx/Kconfig"
-source "board/ti/beagle_x15/Kconfig"
+source "board/ti/am57xx/Kconfig"
 
 endif
board/ti/am57xx/Kconfig renamed from board/ti/beagle_x15/Kconfig +2 -2
similarity index 70%
rename from board/ti/beagle_x15/Kconfig
rename to board/ti/am57xx/Kconfig
index a305ff1..bdb7795 100644
@@ -1,12 +1,12 @@
 if TARGET_BEAGLE_X15
 
 config SYS_BOARD
-	default "beagle_x15"
+	default "am57xx"
 
 config SYS_VENDOR
 	default "ti"
 
 config SYS_CONFIG_NAME
-	default "beagle_x15"
+	default "am57xx_evm"
 
 endif
board/ti/am57xx/MAINTAINERS new file +7 -0
new file mode 100644
index 0000000..b8ae019
@@ -0,0 +1,7 @@
+AM57XX EVM
+M:	Felipe Balbi <[email protected]>
+S:	Maintained
+F:	board/ti/am57xx/
+F:	include/configs/am57xx_evm.h
+F:	configs/am57xx_evm_defconfig
+F:	configs/am57xx_evm_nodt_defconfig
board/ti/am57xx/Makefile renamed from board/ti/beagle_x15/Makefile +0 -0
similarity index 100%
rename from board/ti/beagle_x15/Makefile
rename to board/ti/am57xx/Makefile
board/ti/am57xx/board.c renamed from board/ti/beagle_x15/board.c +0 -0
similarity index 100%
rename from board/ti/beagle_x15/board.c
rename to board/ti/am57xx/board.c
board/ti/am57xx/mux_data.h renamed from board/ti/beagle_x15/mux_data.h +0 -0
similarity index 100%
rename from board/ti/beagle_x15/mux_data.h
rename to board/ti/am57xx/mux_data.h
board/ti/beagle_x15/MAINTAINERS deleted +0 -6
deleted file mode 100644
index 3f84def..0000000
@@ -1,6 +0,0 @@
-BEAGLE X15
-M:	Felipe Balbi <[email protected]>
-S:	Maintained
-F:	board/ti/beagle_x15/
-F:	include/configs/beagle_x15.h
-F:	configs/beagle_x15_defconfig
configs/am57xx_evm_nodt_defconfig renamed from configs/beagle_x15_defconfig +0 -0
similarity index 100%
rename from configs/beagle_x15_defconfig
rename to configs/am57xx_evm_nodt_defconfig
include/configs/am57xx_evm.h renamed from include/configs/beagle_x15.h +3 -3
similarity index 96%
rename from include/configs/beagle_x15.h
rename to include/configs/am57xx_evm.h
index d38b7b5..6308cab 100644
@@ -9,8 +9,8 @@
  * SPDX-License-Identifier:	GPL-2.0+
  */
 
-#ifndef __CONFIG_BEAGLE_X15_H
-#define __CONFIG_BEAGLE_X15_H
+#ifndef __CONFIG_AM57XX_EVM_H
+#define __CONFIG_AM57XX_EVM_H
 
 #define CONFIG_AM57XX
 
@@ -88,4 +88,4 @@
 #define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
 						CONFIG_SYS_SCSI_MAX_LUN)
 
-#endif /* __CONFIG_BEAGLE_X5_H */
+#endif /* __CONFIG_AM57XX_EVM_H */
Signature · 1 line
1.9.1
#4 lore raw

PATCH v2 1/1 board: ti: beagle_x15: Rename to indicate support for TI am57xx evms

Quoted 61 lines · Steve Kipisz

BeagleBoard X15 (http://beagleboard.org/x15) support in u-boot does actually support two different platform configuration offered by TI. In addition to BeagleBoard X15, it also supports the TMDXEVM5728 (or more commonly known as AM5728-evm).

Information about the TI AM57xx EVM can be found here
http://www.ti.com/tool/tmdxevm5728

The EVM configuration is 1-1 compatible with BeagleBoard X15 with the additional support for mPCIe, mSATA, LCD, touchscreen, Camera, push button and TI's wlink8 offering.

Hence, we rename the beagle_x15 directory to am57xx to support TI EVMs that use the AM57xx processor. By doing this we have common code reuse. This sets the stage to have a common u-boot image solution for multiple TI EVMs such as that already done for am335x and am437x. This sets the stage for upcoming multiple TI EVMs that share the same code base.

NOTE: Commit eae7ae185335 ("am437x: Add am57xx_evm_defconfig using CONFIG_DM") introduced DT support for beagle_x15 under am57xx_evm platform name. However, this ignored the potential confusion arising for users as a result. To prevent this, existing beagle_x15_defconfig is renamed as am57xx_evm_nodt_defconfig to denote that this is the "non device tree" configuration for the same platform. We still retain am57xx-beagle-x15.dts at this point, since we just require the common minimum dts.

As a result of this change, users should expect changes in build procedures('make am57xx_evm_nodt_defconfig' instead of 'make beagle_x15_defconfig'). Hopefully, this would be a one-time change.

---
v2 Based on:
master 677f970 common/board_f.c: modify the macro to use get_clocks() more common

Build testing: MAKEALL -s omap5 (no warnings/build errors) Boot Testing:
am57xx_evm_config: http://pastebin.ubuntu.com/13002904/
am57xx_evm_config: http://pastebin.ubuntu.com/13002955/
am57xx_evm_nodt_config: http://pastebin.ubuntu.com/13003008/

Changes in V2 (since v1):
- keep the dt version alive(going with Tom's suggestion:
http://marc.info/?l=u-boot&m=144615230220768&w=2 )
- redo commit message to be more clear
v1: http://marc.info/?t=144607224500010&r=1&w=2
(mailing list squashed original submission)

 arch/arm/cpu/armv7/omap5/Kconfig                            | 2 +-
 board/ti/{beagle_x15 => am57xx}/Kconfig                     | 4 ++--
 board/ti/am57xx/MAINTAINERS                                 | 7 +++++++
 board/ti/{beagle_x15 => am57xx}/Makefile                    | 0
 board/ti/{beagle_x15 => am57xx}/board.c                     | 0
 board/ti/{beagle_x15 => am57xx}/mux_data.h                  | 0
 board/ti/beagle_x15/MAINTAINERS                             | 6 ------
 configs/{beagle_x15_defconfig => am57xx_evm_nodt_defconfig} | 0
 include/configs/{beagle_x15.h => am57xx_evm.h}              | 6 +++---
 9 files changed, 13 insertions(+), 12 deletions(-)
Quoted 8 lines
 rename board/ti/{beagle_x15 => am57xx}/Kconfig (70%)
 create mode 100644 board/ti/am57xx/MAINTAINERS
 rename board/ti/{beagle_x15 => am57xx}/Makefile (100%)
 rename board/ti/{beagle_x15 => am57xx}/board.c (100%)
 rename board/ti/{beagle_x15 => am57xx}/mux_data.h (100%)
 delete mode 100644 board/ti/beagle_x15/MAINTAINERS
 rename configs/{beagle_x15_defconfig => am57xx_evm_nodt_defconfig} (100%)
 rename include/configs/{beagle_x15.h => am57xx_evm.h} (96%)

Mostly looks fine to me. now.
while digging at this, I noticed
const struct omap_sysinfo sysinfo is hardcoded to "Board: BeagleBoard x15\n"

I suppose, I suppose it is ok to leave that.. Tom, Lokesh, Felipe: any comments?

if that is not a problem,

Quoted 101 lines
arch/arm/cpu/armv7/omap5/Kconfig +1 -1
index 20c3bd9..bfa264e 100644
@@ -24,6 +24,6 @@ config SYS_SOC
 source "board/compulab/cm_t54/Kconfig"
 source "board/ti/omap5_uevm/Kconfig"
 source "board/ti/dra7xx/Kconfig"
-source "board/ti/beagle_x15/Kconfig"
+source "board/ti/am57xx/Kconfig"
 
 endif
board/ti/am57xx/Kconfig renamed from board/ti/beagle_x15/Kconfig +2 -2
similarity index 70%
rename from board/ti/beagle_x15/Kconfig
rename to board/ti/am57xx/Kconfig
index a305ff1..bdb7795 100644
@@ -1,12 +1,12 @@
 if TARGET_BEAGLE_X15
 
 config SYS_BOARD
-	default "beagle_x15"
+	default "am57xx"
 
 config SYS_VENDOR
 	default "ti"
 
 config SYS_CONFIG_NAME
-	default "beagle_x15"
+	default "am57xx_evm"
 
 endif
board/ti/am57xx/MAINTAINERS new file +7 -0
new file mode 100644
index 0000000..b8ae019
@@ -0,0 +1,7 @@
+AM57XX EVM
+M:	Felipe Balbi <[email protected]>
+S:	Maintained
+F:	board/ti/am57xx/
+F:	include/configs/am57xx_evm.h
+F:	configs/am57xx_evm_defconfig
+F:	configs/am57xx_evm_nodt_defconfig
board/ti/am57xx/Makefile renamed from board/ti/beagle_x15/Makefile +0 -0
similarity index 100%
rename from board/ti/beagle_x15/Makefile
rename to board/ti/am57xx/Makefile
board/ti/am57xx/board.c renamed from board/ti/beagle_x15/board.c +0 -0
similarity index 100%
rename from board/ti/beagle_x15/board.c
rename to board/ti/am57xx/board.c
board/ti/am57xx/mux_data.h renamed from board/ti/beagle_x15/mux_data.h +0 -0
similarity index 100%
rename from board/ti/beagle_x15/mux_data.h
rename to board/ti/am57xx/mux_data.h
board/ti/beagle_x15/MAINTAINERS deleted +0 -6
deleted file mode 100644
index 3f84def..0000000
@@ -1,6 +0,0 @@
-BEAGLE X15
-M:	Felipe Balbi <[email protected]>
-S:	Maintained
-F:	board/ti/beagle_x15/
-F:	include/configs/beagle_x15.h
-F:	configs/beagle_x15_defconfig
configs/am57xx_evm_nodt_defconfig renamed from configs/beagle_x15_defconfig +0 -0
similarity index 100%
rename from configs/beagle_x15_defconfig
rename to configs/am57xx_evm_nodt_defconfig
include/configs/am57xx_evm.h renamed from include/configs/beagle_x15.h +3 -3
similarity index 96%
rename from include/configs/beagle_x15.h
rename to include/configs/am57xx_evm.h
index d38b7b5..6308cab 100644
@@ -9,8 +9,8 @@
  * SPDX-License-Identifier:	GPL-2.0+
  */
 
-#ifndef __CONFIG_BEAGLE_X15_H
-#define __CONFIG_BEAGLE_X15_H
+#ifndef __CONFIG_AM57XX_EVM_H
+#define __CONFIG_AM57XX_EVM_H
 
 #define CONFIG_AM57XX
 
@@ -88,4 +88,4 @@
 #define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
 						CONFIG_SYS_SCSI_MAX_LUN)
 
-#endif /* __CONFIG_BEAGLE_X5_H */
+#endif /* __CONFIG_AM57XX_EVM_H */
Signature · 2 lines
Regards,
Nishanth Menon
#5 lore raw

PATCH v2 1/1 board: ti: beagle_x15: Rename to indicate support for TI am57xx evms

Quoted 72 lines · Nishanth Menon
Quoted 61 lines · Steve Kipisz

BeagleBoard X15 (http://beagleboard.org/x15) support in u-boot does actually support two different platform configuration offered by TI. In addition to BeagleBoard X15, it also supports the TMDXEVM5728 (or more commonly known as AM5728-evm).

Information about the TI AM57xx EVM can be found here
http://www.ti.com/tool/tmdxevm5728

The EVM configuration is 1-1 compatible with BeagleBoard X15 with the additional support for mPCIe, mSATA, LCD, touchscreen, Camera, push button and TI's wlink8 offering.

Hence, we rename the beagle_x15 directory to am57xx to support TI EVMs that use the AM57xx processor. By doing this we have common code reuse. This sets the stage to have a common u-boot image solution for multiple TI EVMs such as that already done for am335x and am437x. This sets the stage for upcoming multiple TI EVMs that share the same code base.

NOTE: Commit eae7ae185335 ("am437x: Add am57xx_evm_defconfig using CONFIG_DM") introduced DT support for beagle_x15 under am57xx_evm platform name. However, this ignored the potential confusion arising for users as a result. To prevent this, existing beagle_x15_defconfig is renamed as am57xx_evm_nodt_defconfig to denote that this is the "non device tree" configuration for the same platform. We still retain am57xx-beagle-x15.dts at this point, since we just require the common minimum dts.

As a result of this change, users should expect changes in build procedures('make am57xx_evm_nodt_defconfig' instead of 'make beagle_x15_defconfig'). Hopefully, this would be a one-time change.

---
v2 Based on:
master 677f970 common/board_f.c: modify the macro to use get_clocks() more common

Build testing: MAKEALL -s omap5 (no warnings/build errors) Boot Testing:
am57xx_evm_config: http://pastebin.ubuntu.com/13002904/
am57xx_evm_config: http://pastebin.ubuntu.com/13002955/
am57xx_evm_nodt_config: http://pastebin.ubuntu.com/13003008/

Changes in V2 (since v1):
- keep the dt version alive(going with Tom's suggestion:
http://marc.info/?l=u-boot&m=144615230220768&w=2 )
- redo commit message to be more clear
v1: http://marc.info/?t=144607224500010&r=1&w=2
(mailing list squashed original submission)

 arch/arm/cpu/armv7/omap5/Kconfig                            | 2 +-
 board/ti/{beagle_x15 => am57xx}/Kconfig                     | 4 ++--
 board/ti/am57xx/MAINTAINERS                                 | 7 +++++++
 board/ti/{beagle_x15 => am57xx}/Makefile                    | 0
 board/ti/{beagle_x15 => am57xx}/board.c                     | 0
 board/ti/{beagle_x15 => am57xx}/mux_data.h                  | 0
 board/ti/beagle_x15/MAINTAINERS                             | 6 ------
 configs/{beagle_x15_defconfig => am57xx_evm_nodt_defconfig} | 0
 include/configs/{beagle_x15.h => am57xx_evm.h}              | 6 +++---
 9 files changed, 13 insertions(+), 12 deletions(-)
Quoted 8 lines
 rename board/ti/{beagle_x15 => am57xx}/Kconfig (70%)
 create mode 100644 board/ti/am57xx/MAINTAINERS
 rename board/ti/{beagle_x15 => am57xx}/Makefile (100%)
 rename board/ti/{beagle_x15 => am57xx}/board.c (100%)
 rename board/ti/{beagle_x15 => am57xx}/mux_data.h (100%)
 delete mode 100644 board/ti/beagle_x15/MAINTAINERS
 rename configs/{beagle_x15_defconfig => am57xx_evm_nodt_defconfig} (100%)
 rename include/configs/{beagle_x15.h => am57xx_evm.h} (96%)
Quoted 7 lines

Mostly looks fine to me. now.
while digging at this, I noticed
const struct omap_sysinfo sysinfo is hardcoded to "Board: BeagleBoard x15\n"

I suppose, I suppose it is ok to leave that.. Tom, Lokesh, Felipe: any comments?

omap_sysinfo will not be used with DT at all. I guess this is ok. (This should be cleaned when only DT is present).

Thanks and regards,
Lokesh

Quoted 107 lines

if that is not a problem,

Quoted 101 lines
arch/arm/cpu/armv7/omap5/Kconfig +1 -1
index 20c3bd9..bfa264e 100644
@@ -24,6 +24,6 @@ config SYS_SOC
 source "board/compulab/cm_t54/Kconfig"
 source "board/ti/omap5_uevm/Kconfig"
 source "board/ti/dra7xx/Kconfig"
-source "board/ti/beagle_x15/Kconfig"
+source "board/ti/am57xx/Kconfig"
 
 endif
board/ti/am57xx/Kconfig renamed from board/ti/beagle_x15/Kconfig +2 -2
similarity index 70%
rename from board/ti/beagle_x15/Kconfig
rename to board/ti/am57xx/Kconfig
index a305ff1..bdb7795 100644
@@ -1,12 +1,12 @@
 if TARGET_BEAGLE_X15
 
 config SYS_BOARD
-	default "beagle_x15"
+	default "am57xx"
 
 config SYS_VENDOR
 	default "ti"
 
 config SYS_CONFIG_NAME
-	default "beagle_x15"
+	default "am57xx_evm"
 
 endif
board/ti/am57xx/MAINTAINERS new file +7 -0
new file mode 100644
index 0000000..b8ae019
@@ -0,0 +1,7 @@
+AM57XX EVM
+M:	Felipe Balbi <[email protected]>
+S:	Maintained
+F:	board/ti/am57xx/
+F:	include/configs/am57xx_evm.h
+F:	configs/am57xx_evm_defconfig
+F:	configs/am57xx_evm_nodt_defconfig
board/ti/am57xx/Makefile renamed from board/ti/beagle_x15/Makefile +0 -0
similarity index 100%
rename from board/ti/beagle_x15/Makefile
rename to board/ti/am57xx/Makefile
board/ti/am57xx/board.c renamed from board/ti/beagle_x15/board.c +0 -0
similarity index 100%
rename from board/ti/beagle_x15/board.c
rename to board/ti/am57xx/board.c
board/ti/am57xx/mux_data.h renamed from board/ti/beagle_x15/mux_data.h +0 -0
similarity index 100%
rename from board/ti/beagle_x15/mux_data.h
rename to board/ti/am57xx/mux_data.h
board/ti/beagle_x15/MAINTAINERS deleted +0 -6
deleted file mode 100644
index 3f84def..0000000
@@ -1,6 +0,0 @@
-BEAGLE X15
-M:	Felipe Balbi <[email protected]>
-S:	Maintained
-F:	board/ti/beagle_x15/
-F:	include/configs/beagle_x15.h
-F:	configs/beagle_x15_defconfig
configs/am57xx_evm_nodt_defconfig renamed from configs/beagle_x15_defconfig +0 -0
similarity index 100%
rename from configs/beagle_x15_defconfig
rename to configs/am57xx_evm_nodt_defconfig
include/configs/am57xx_evm.h renamed from include/configs/beagle_x15.h +3 -3
similarity index 96%
rename from include/configs/beagle_x15.h
rename to include/configs/am57xx_evm.h
index d38b7b5..6308cab 100644
@@ -9,8 +9,8 @@
  * SPDX-License-Identifier:	GPL-2.0+
  */
 
-#ifndef __CONFIG_BEAGLE_X15_H
-#define __CONFIG_BEAGLE_X15_H
+#ifndef __CONFIG_AM57XX_EVM_H
+#define __CONFIG_AM57XX_EVM_H
 
 #define CONFIG_AM57XX
 
@@ -88,4 +88,4 @@
 #define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
 						CONFIG_SYS_SCSI_MAX_LUN)
 
-#endif /* __CONFIG_BEAGLE_X5_H */
+#endif /* __CONFIG_AM57XX_EVM_H */
#6 lore raw

PATCH v2 1/1 board: ti: beagle_x15: Rename to indicate support for TI am57xx evms

In reply to Steve Kipisz
Quoted 28 lines · Steven

BeagleBoard X15 (http://beagleboard.org/x15) support in u-boot does actually support two different platform configuration offered by TI. In addition to BeagleBoard X15, it also supports the TMDXEVM5728 (or more commonly known as AM5728-evm).

Information about the TI AM57xx EVM can be found here
http://www.ti.com/tool/tmdxevm5728

The EVM configuration is 1-1 compatible with BeagleBoard X15 with the additional support for mPCIe, mSATA, LCD, touchscreen, Camera, push button and TI's wlink8 offering.

Hence, we rename the beagle_x15 directory to am57xx to support TI EVMs that use the AM57xx processor. By doing this we have common code reuse. This sets the stage to have a common u-boot image solution for multiple TI EVMs such as that already done for am335x and am437x. This sets the stage for upcoming multiple TI EVMs that share the same code base.

NOTE: Commit eae7ae185335 ("am437x: Add am57xx_evm_defconfig using CONFIG_DM") introduced DT support for beagle_x15 under am57xx_evm platform name. However, this ignored the potential confusion arising for users as a result. To prevent this, existing beagle_x15_defconfig is renamed as am57xx_evm_nodt_defconfig to denote that this is the "non device tree" configuration for the same platform. We still retain am57xx-beagle-x15.dts at this point, since we just require the common minimum dts.

Quoted 8 lines

As a result of this change, users should expect changes in build procedures('make am57xx_evm_nodt_defconfig' instead of 'make beagle_x15_defconfig'). Hopefully, this would be a one-time change.

Applied to u-boot/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20151118/e3794743/attachment.sig>