ls102xa: Adjust some macros for SD boot on LS1021A QDS board

PATCH New Alison Wang 2 participants 2 messages Oct 30, 2015

Share & tools

Alison Wang

author

2015-10-30 14:45 UTC #0 lore raw

PATCH 1/1 ls102xa: Adjust some macros for SD boot on LS1021A QDS board

As more features are added for SD boot on LS1021A QDS board, the size of U-Boot is larger. CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS needs to be adjusted to a suitable value.

Starting address of the malloc pool used in SPL needs to be adjusted too, or it will occupy the address u-boot loads.

Signed-off-by Alison Wang <[email protected]>

---
 include/configs/ls1021aqds.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

include/configs/ls1021aqds.h +2 -2

index d19b1e3..562e78f 100644
@@ -69,7 +69,7 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT
 #define CONFIG_SPL_MMC_SUPPORT
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR		0xe8
-#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS		0x400
+#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS		0x600
 
 #define CONFIG_SPL_TEXT_BASE		0x10000000
 #define CONFIG_SPL_MAX_SIZE		0x1a000

@@ -82,7 +82,7 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000
 #define CONFIG_SPL_BSS_START_ADDR	0x80100000
 #define CONFIG_SPL_BSS_MAX_SIZE		0x80000
-#define CONFIG_SYS_MONITOR_LEN		0x80000
+#define CONFIG_SYS_MONITOR_LEN		0xc0000
 #endif
 
 #ifdef CONFIG_QSPI_BOOT

Signature · 1 line

2.1.0.27.g96db324

York Sun

2015-10-30 16:22 UTC #1 lore raw

PATCH 1/1 ls102xa: Adjust some macros for SD boot on LS1021A QDS board

Quoted 9 lines · Alison Wang

As more features are added for SD boot on LS1021A QDS board, the size of U-Boot is larger. CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS needs to be adjusted to a suitable value.
Starting address of the malloc pool used in SPL needs to be adjusted too, or it will occupy the address u-boot loads.
Signed-off-by Alison Wang <[email protected]>
---

Applied to u-boot-fsl-qoriq. Awaiting upstream. Thanks.

York