drm/i915: Add extra plane information in debugfs.
Subsystems (2)
PATCH v3 1/1 drm/i915: Add extra plane information in debugfs.
Extends i915_display_info so that for each active crtc also print all planes associated with the pipe. This patch shows information about each plane wrt format, size, position, rotation, and scaling. This is very useful when debugging user space compositors that try to utilize several planes for a commit.
V2: Fixed comments from Maarten, Ville, and Chris. Fixed printing of 16.16 fixpoint, better rotation bitmask management and some minor fixes
V3: Corrected state->src_x & 0x00ff to state->src_x & 0xffff...
--- drivers/gpu/drm/i915/i915_debugfs.c | 109 +++++++++++++++++++++++++++++++++++- 1 file changed, 107 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/i915_debugfs.c +107 -2
@@ -2950,6 +2950,107 @@ static bool cursor_position(struct drm_device *dev, int pipe, int *x, int *y)return cursor_active (dev, pipe); } +static const char *plane_type (enum drm_plane_type type) +{ +switch (type) { +case DRM_PLANE_TYPE_OVERLAY : +return "OVL" ; +case DRM_PLANE_TYPE_PRIMARY : +return "PRI" ; +case DRM_PLANE_TYPE_CURSOR : +return "CUR" ; +/* +* Deliberately omitting default: to generate compiler warnings +* when a new drm_plane_type gets added. +*/ + } + +return "unknown" ; +} + +static const char *plane_rotation (unsigned int rotation) +{ +static char buf[48 ]; +/* +* According to doc only one DRM_ROTATE_ is allowed but this +* will print them all to visualize if the values are misused +*/ +snprintf (buf,sizeof (buf), +"%s%s%s%s%s%s(0x%08x)" , + (rotation &BIT (DRM_ROTATE_0 )) ?"0 " :"" , + (rotation &BIT (DRM_ROTATE_90 )) ?"90 " :"" , + (rotation &BIT (DRM_ROTATE_180 )) ?"180 " :"" , + (rotation &BIT (DRM_ROTATE_270 )) ?"270 " :"" , + (rotation &BIT (DRM_REFLECT_X )) ?"FLIPX " :"" , + (rotation &BIT (DRM_REFLECT_Y )) ?"FLIPY " :"" , + rotation); + +return buf; +} + +static void intel_plane_info (struct seq_file *m,struct intel_crtc *intel_crtc) +{ +struct drm_info_node *node = m->private; +struct drm_device *dev = node->minor->dev; +struct intel_plane *intel_plane; + +for_each_intel_plane_on_crtc (dev, intel_crtc, intel_plane) { +struct drm_plane_state *state; +struct drm_plane *plane = &intel_plane->base; + +if (!plane->state) { +seq_puts (m,"plane->state is NULL!\n" ); +continue ; + } + + state = plane->state; + +seq_printf (m,"\t--Plane id %d: type=%s, crtc_pos=%4dx%4d, crtc_size=%4dx%4d, src_pos=%d.%04ux%d.%04u, src_size=%d.%04ux%d.%04u, format=%s, rotation=%s\n" , + plane->base.id, +plane_type (intel_plane->base.type), + state->crtc_x, state->crtc_y, + state->crtc_w, state->crtc_h, + (state->src_x >>16 ), + ((state->src_x &0xffff ) *15625 ) >>10 , + (state->src_y >>16 ), + ((state->src_y &0xffff ) *15625 ) >>10 , + (state->src_w >>16 ), + ((state->src_w &0xffff ) *15625 ) >>10 , + (state->src_h >>16 ), + ((state->src_h &0xffff ) *15625 ) >>10 , + state->fb ?drm_get_format_name (state->fb->pixel_format) :"N/A" , +plane_rotation (state->rotation)); + } +} + +static void intel_scaler_info (struct seq_file *m,struct intel_crtc *intel_crtc) +{ +struct intel_crtc_state *pipe_config; +int num_scalers = intel_crtc->num_scalers; +int i; + + pipe_config =to_intel_crtc_state (intel_crtc->base.state); + +/* Not all platformas have a scaler */ +if (num_scalers) { +seq_printf (m,"\tnum_scalers=%d, scaler_users=%x scaler_id=%d" , + num_scalers, + pipe_config->scaler_state.scaler_users, + pipe_config->scaler_state.scaler_id); + +for (i =0 ; i <SKL_NUM_SCALERS ; i++) { +struct intel_scaler *sc = + &pipe_config->scaler_state.scalers[i]; + +seq_printf (m,", scalers[%d]: use=%s, mode=%x" , + i,yesno (sc->in_use), sc->mode); + } +seq_puts (m,"\n" ); + }else { +seq_puts (m,"\tNo scalers available on this platform\n" ); + } +} +static int i915_display_info (struct seq_file *m,void *unused) {struct drm_info_node *node = m->private;
@@ -2969,10 +3070,12 @@ static int i915_display_info(struct seq_file *m, void *unused) pipe_config =to_intel_crtc_state (crtc->base.state); -seq_printf (m,"CRTC %d: pipe: %c, active=%s (size=%dx%d)\n" , +seq_printf (m,"CRTC %d: pipe: %c, active=%s, (size=%dx%d), dither=%s, bpp=%d\n" , crtc->base.base.id,pipe_name (crtc->pipe),yesno (pipe_config->base.active), - pipe_config->pipe_src_w, pipe_config->pipe_src_h); + pipe_config->pipe_src_w, pipe_config->pipe_src_h, +yesno (pipe_config->dither), pipe_config->pipe_bpp); +if (pipe_config->base.active) {intel_crtc_info (m, crtc);
@@ -2982,6 +3085,8 @@ static int i915_display_info(struct seq_file *m, void *unused) x, y, crtc->base.cursor->state->crtc_w, crtc->base.cursor->state->crtc_h, crtc->cursor_addr, yesno(active)); +intel_scaler_info (m, crtc); +intel_plane_info (m, crtc); } seq_printf(m, "\tunderrun reporting: cpu=%s pch=%s \n",
Signature · 6 lines
1.9.1 _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Op 27-10-15 om 16:58 schreef Robert Fekete:
Quoted 6 lines
Extends
i915_display_infoso that for each active crtc also print all planes associated with the pipe. This patch shows information about each plane wrt format, size, position, rotation, and scaling. This is very useful when debugging user space compositors that try to utilize several planes for a commit.
Quoted 7 lines
V2: Fixed comments from Maarten, Ville, and Chris. Fixed printing of 16.16 fixpoint, better rotation bitmask management and some minor fixes
V3: Corrected
state->src_x&0x00fftostate->src_x&0xffff...Signed-off-by Robert Fekete <[email protected]>
Pushed.
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx