Skip to contentSkip to conversation

drivers: net: cpsw: Add support for fixed-link PHY

PATCH Applied Markus Brunner 3 participants 3 messages Nov 3, 2015 – Nov 5, 2015

Subsystems (4)
Networking Network drivers Device tree bindings TI Ethernet switch driver (cpsw)
lore
Share & tools
lore

Markus Brunner

author
#0 lore raw

PATCH 1/1 drivers: net: cpsw: Add support for fixed-link PHY

Add support for a fixed-link devicetree sub-node in case the the cpsw MAC is directly connected to a non-mdio PHY/device.

Signed-off-by Markus Brunner <[email protected]>
---
 Documentation/devicetree/bindings/net/cpsw.txt |    5 +++++
 drivers/net/ethernet/ti/cpsw.c                 |   13 +++++++++++++
 2 files changed, 18 insertions(+)
Documentation/devicetree/bindings/net/cpsw.txt +5 -0
diff -upNr linux-4.3.orig/Documentation/devicetree/bindings/net/cpsw.txt linux-4.3/Documentation/devicetree/bindings/net/cpsw.txt
@@ -41,6 +41,11 @@ Optional properties:
 - mac-address		: See ethernet.txt file in the same directory
 - phy-handle		: See ethernet.txt file in the same directory
 
+Slave sub-nodes:
+- fixed-link		: See fixed-link.txt file in the same directory
+			  Either the properties phy_id and phy-mode,
+			  or the sub-node fixed-link can be specified
+
 Note: "ti,hwmods" field is used to fetch the base address and irq
 resources from TI, omap hwmod data base during device registration.
 Future plan is to migrate hwmod data base contents into device tree
drivers/net/ethernet/ti/cpsw.c +13 -0
diff -upNr linux-4.3.orig/drivers/net/ethernet/ti/cpsw.c linux-4.3/drivers/net/ethernet/ti/cpsw.c
@@ -2037,6 +2037,19 @@ static int cpsw_probe_dt(struct cpsw_pri
 			continue;
 
 		priv->phy_node = of_parse_phandle(slave_node, "phy-handle", 0);
+		if (of_phy_is_fixed_link(slave_node)) {
+			struct phy_device *pd;
+
+			ret = of_phy_register_fixed_link(slave_node);
+			if (ret)
+				return ret;
+			pd = of_phy_find_device(slave_node);
+			if (!pd)
+				return -ENODEV;
+			snprintf(slave_data->phy_id, sizeof(slave_data->phy_id),
+				 PHY_ID_FMT, pd->bus->id, pd->phy_id);
+			goto no_phy_slave;
+		}
 		parp = of_get_property(slave_node, "phy_id", &lenp);
 		if ((parp == NULL) || (lenp != (sizeof(void *) * 2))) {
 			dev_err(&pdev->dev, "Missing slave[%d] phy_id property\n", i);