Question with maxcpus= parameter.
Hi Maintainers,
Recently we faced an cpu online issue with maxcpus= parameter.
We want to have 4 cpus onlined at bootup, test 3.8.13-stable on an 72 cpus env with maxcpus=4, I found more cpus than 4 are onlined. It's the udev scripts make them onlined. But below script exist for a long time.
ACTION=="add", KERNEL=="cpu[0-9]*", RUN+="/bin/bash -c 'echo 1 > /sys/devices/system/cpu/%k/online'"
maxcpu= parameter didn't take effect, so is this a kernel bug? Or that script should be removed?
Btw: 2.6.39 works fine, I checked udev log, seems CPU ADD event is only sent for 4cpus. Why the difference between 2.6.39 and 3.8.13?
thanks
zduan
Hi Zduan
do you know which distribution it is? This isn't a kernel bug.
if you look at dmesg you should see how many CPUs were booted. But the sysfs files are created and the usermode script is bringing every cpu online.
Tony mentioned this to me couple weeks ago when i was fixing another bug in maxcpus. I think you can safely remove the script and it should be fine.
Cheers,
Ashok
Quoted 20 lines · Zhenzhong Duan
Hi Maintainers,
Recently we faced an cpu online issue with maxcpus= parameter.
We want to have 4 cpus onlined at bootup, test 3.8.13-stable on an 72 cpus env with maxcpus=4, I found more cpus than 4 are onlined.
It's the udev scripts make them onlined. But below script exist for a long time.
ACTION=="add", KERNEL=="cpu[0-9]*", RUN+="/bin/bash -c 'echo 1 > /sys/devices/system/cpu/%k/online'"maxcpu= parameter didn't take effect, so is this a kernel bug? Or that script should be removed?
Btw: 2.6.39 works fine, I checked udev log, seems CPU ADD event is only sent for 4cpus.
Why the difference between 2.6.39 and 3.8.13?thanks
zduan
Thanks for your quick response, Raj.
It's OL6 compatible with rhel6.
zduan
Quoted 35 lines · Ashok
Hi Zduan
do you know which distribution it is? This isn't a kernel bug.
if you look at dmesg you should see how many CPUs were booted. But the sysfs files are created and the usermode script is bringing every cpu online.
Tony mentioned this to me couple weeks ago when i was fixing another bug in maxcpus. I think you can safely remove the script and it should be fine.
Cheers,
AshokQuoted 20 lines · Zhenzhong Duan
Hi Maintainers,
Recently we faced an cpu online issue with maxcpus= parameter.
We want to have 4 cpus onlined at bootup, test 3.8.13-stable on an 72 cpus env with maxcpus=4, I found more cpus than 4 are onlined.
It's the udev scripts make them onlined. But below script exist for a long time.
ACTION=="add", KERNEL=="cpu[0-9]*", RUN+="/bin/bash -c 'echo 1 > /sys/devices/system/cpu/%k/online'"maxcpu= parameter didn't take effect, so is this a kernel bug? Or that script should be removed?
Btw: 2.6.39 works fine, I checked udev log, seems CPU ADD event is only sent for 4cpus.
Why the difference between 2.6.39 and 3.8.13?thanks
zduan
A message that is not in the archive (sent off-list or not yet received): [email protected]
Tried nr_cpus=4, works.
[root@rwssq01 ~]# cat /sys/devices/system/cpu/possible
0-3
[root@rwssq01 ~]# cat /sys/devices/system/cpu/present
0-3
[root@rwssq01 ~]# uname -a
Linux rwssq01.us.oracle.com 3.8.13-44.1.1.el6uek.x86_64 #2 SMP Wed Sep 10 06:10:25 PDT 2014 x86_64 x86_64 x86_64 GNU/Linux
zduan
Quoted 21 lines · Konrad Rzeszutek Wilk
Quoted 3 lines · Zhenzhong Duan
Hi Maintainers,
Recently we faced an cpu online issue with maxcpus= parameter.
Did you try '
nr_cpus' ?Quoted 16 lines
We want to have 4 cpus onlined at bootup, test 3.8.13-stable on an 72 cpus env with maxcpus=4, I found more cpus than 4 are onlined.
It's the udev scripts make them onlined. But below script exist for a long time.
ACTION=="add", KERNEL=="cpu[0-9]*", RUN+="/bin/bash -c 'echo 1 > /sys/devices/system/cpu/%k/online'"maxcpu= parameter didn't take effect, so is this a kernel bug? Or that script should be removed?
Btw: 2.6.39 works fine, I checked udev log, seems CPU ADD event is only sent for 4cpus.
Why the difference between 2.6.39 and 3.8.13?thanks
zduan
Quoted 2 lines · Zhenzhong Duan
Tried nr_cpus=4, works.
nr_cpus and maxcpus are different.
maxcpus=4 means kernel will only bring up 4 cpus, but other cpus still can be brought up online.
if there are more cpu are there according acpi MADT.
nr_cpus=4 that means 4 is hard limit, just like you compiled kernel with CONFIG_NR_CPUS=4.
Yinghai
Quoted 4 lines · Yinghai Lu
Quoted 2 lines · Zhenzhong Duan
Tried nr_cpus=4, works.
Quoted 8 lines
nr_cpusand maxcpus are different.maxcpus=4 means kernel will only bring up 4 cpus, but other cpus still can be brought up online.
if there are more cpu are there according acpi MADT.nr_cpus=4 that means 4 is hard limit, just like you compiled kernel with
CONFIG_NR_CPUS=4.
I know that, what confused me is uek2(2.6.39-400.249.4.el6uek.x86_64) works with maxcpus=, but uek3(3.8.13-44.1.1.el6uek.x86_64) not when I don't comment out the script. I have ever suspected uek2 send CPU ADD event for only 4 cpus.
dyndbg="file kobject_uevent.c +p" is used when debug, vimdiff with both dmesg:
uek2 | uek3
......
PCI: Using configuration type 1 for base
access | PCI: Using configuration type 1 for base access
kobject: 'node0' (ffffffff81d6c9d0):kobject_uevent_env | kobject: 'node0' (ffff883f25984410): kobject_uevent_env
kobject: 'cpu0' (ffff88407ec0b2f8):kobject_uevent_env | kobject: 'cpu0' (ffff883f7ec0c3d8): kobject_uevent_env
kobject: 'cpu1' (ffff88407ec2b2f8):kobject_uevent_env | kobject: 'cpu1' (ffff883f7ec2c3d8): kobject_uevent_env
......
kobject: 'cpu70' (ffff88407f4cb2f8):kobject_uevent_env | kobject: 'cpu70' (ffff883f7f4cc3d8): kobject_uevent_env
kobject: 'cpu71' (ffff88407f4eb2f8):kobject_uevent_env | kobject: 'cpu71' (ffff883f7f4ec3d8): kobject_uevent_env
......
dracut: dracut-004-356.0.1.el6 | dracut:
dracut-004-356.0.1.el6
dracut: rd_NO_LUKS: removing cryptoluks
activation | dracut: rd_NO_LUKS: removing cryptoluks activation
kobject: 'dm_mod' (ffffffffa000e290):kobject_uevent_env | kobject: 'dm_mod' (ffffffffa000f3b0): kobject_uevent_env
device-mapper: uevent: version
1.0.3 | device-mapper: uevent: version 1.0.3
udev: starting version 147 | udev: starting version 147
......
kobject: 'cpu0' (ffff883f0076dc10):kobject_uevent_env | kobject: 'cpu0' (ffff883f7ec0c3d8): kobject_uevent_env
kobject: 'cpu1' (ffff883f0076d810):kobject_uevent_env | kobject: 'cpu1' (ffff883f7ec2c3d8): kobject_uevent_env
kobject: 'cpu2' (ffff883f0076d410):kobject_uevent_env | kobject: 'cpu10' (ffff883f7ed4c3d8): kobject_uevent_env
kobject: 'cpu3' (ffff883f0076d010):kobject_uevent_env | kobject: 'cpu11' (ffff883f7ed6c3d8): kobject_uevent_env
kobject: 'id' (ffff883f05716c10):kobject_uevent_env | kobject: 'cpu12' (ffff883f7ed8c3d8): kobject_uevent_env
kobject: 'fbcon' (ffff883f05779c10):kobject_uevent_env | kobject: 'cpu13' (ffff883f7f42c3d8): kobject_uevent_env
...... | ...... (total 72 cpus)
dracut: | dracut:
dracut: Switching root | dracut: Switching root
udev: starting version 147 | udev: starting version 147
kobject: 'cpu0' (ffff883f0076dc10):kobject_uevent_env | kobject: 'cpu0' (ffff883f7ec0c3d8): kobject_uevent_env
kobject: 'cpu1' (ffff883f0076d810):kobject_uevent_env | kobject: 'cpu1' (ffff883f7ec2c3d8): kobject_uevent_env
kobject: 'cpu2' (ffff883f0076d410):kobject_uevent_env | kobject: 'cpu10' (ffff883f7ed4c3d8): kobject_uevent_env
kobject: 'cpu3' (ffff883f0076d010):kobject_uevent_env | kobject: 'cpu11' (ffff883f7ed6c3d8): kobject_uevent_env
kobject: 'id' (ffff883f05716c10):kobject_uevent_env | kobject: 'cpu12' (ffff883f7ed8c3d8): kobject_uevent_env
kobject: 'fbcon' (ffff883f05779c10):kobject_uevent_env | kobject: 'cpu13' (ffff883f7f42c3d8): kobject_uevent_env
...... | ...... (total 72 cpus)
I looked at the path to send event at bootup, it's almost same, the dmesg confirmed this. uek2 topology_init->arch_register_cpu->register_cpu->sysdev_register->kobject_uevent(&dev->kobj, KOBJ_ADD); uek3 topology_init->arch_register_cpu->register_cpu->device_register->kobject_uevent(&dev->kobj, KOBJ_ADD);
But I don't find who send event again after udev start with different cpu count.
thanks
zduan
Quoted 7 lines · Zhenzhong Duan
I know that, what confused me is
uek2(2.6.39-400.249.4.el6uek.x86_64)works with maxcpus=,
butuek3(3.8.13-44.1.1.el6uek.x86_64)not when I don't comment out the script.
I have ever suspected uek2 send CPU ADD event for only 4 cpus. dyndbg="filekobject_uevent.c+p" is used when debug, vimdiff with both dmesg:
Should be a regression. Can you bisect it?
Thanks
Yinghai