linux-headers: bump 3.{10, 14}.x and 4.{1, 2}.x series

PATCH New Gustavo Zacarias 4 participants 9 messages Nov 10, 2015 – Nov 13, 2015

Subsystems (2)

PowerPC Arm/versatile express platform

lore

Share & tools

lore

Gustavo Zacarias

author

2015-11-10 10:39 UTC #0 lore raw

PATCH 1/2 linux-headers: bump 3.{10, 14}.x and 4.{1, 2}.x series

Signed-off-by Gustavo Zacarias <[email protected]>

---
 package/linux-headers/Config.in.host | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

package/linux-headers/Config.in.host +4 -4

index d2686b6..5f99cc1 100644
@@ -201,15 +201,15 @@ config BR2_DEFAULT_KERNEL_HEADERS
 	string
 	default "3.2.72"	if BR2_KERNEL_HEADERS_3_2
 	default "3.4.110"	if BR2_KERNEL_HEADERS_3_4
-	default "3.10.92"	if BR2_KERNEL_HEADERS_3_10
+	default "3.10.93"	if BR2_KERNEL_HEADERS_3_10
 	default "3.12.50"	if BR2_KERNEL_HEADERS_3_12
-	default "3.14.56"	if BR2_KERNEL_HEADERS_3_14
+	default "3.14.57"	if BR2_KERNEL_HEADERS_3_14
 	default "3.16.7"	if BR2_KERNEL_HEADERS_3_16
 	default "3.17.8"	if BR2_KERNEL_HEADERS_3_17
 	default "3.18.24"	if BR2_KERNEL_HEADERS_3_18
 	default "3.19.8"	if BR2_KERNEL_HEADERS_3_19
 	default "4.0.9"		if BR2_KERNEL_HEADERS_4_0
-	default "4.1.12"	if BR2_KERNEL_HEADERS_4_1
-	default "4.2.5"		if BR2_KERNEL_HEADERS_4_2
+	default "4.1.13"	if BR2_KERNEL_HEADERS_4_1
+	default "4.2.6"		if BR2_KERNEL_HEADERS_4_2
 	default "4.3"		if BR2_KERNEL_HEADERS_4_3
 	default BR2_DEFAULT_KERNEL_VERSION if BR2_KERNEL_HEADERS_VERSION

Signature · 1 line

2.4.10

Gustavo Zacarias

author

2015-11-10 10:39 UTC #1 lore raw

PATCH 2/2 configs/qemu: bump to the latest linux version

ppc-mpc8544ds: switch to custom kernel config since the new 4.3-shipped mpc85xx_basic_defconfig doesn't work with Qemu.
Incidentally while cleaning it up it now seems to work fine with newer qemu versions.

sparc64_sun4u: ditch ne2k driver since it's useless, and add the e1000 driver which works fine.

x86: stick to 4.2.x kernels since 4.3 doesn't work right with uclibc (any variant) based toolchains.

Results table:

Defconfig Kernel Qemu Network Status
--------------------------------------------------------------

aarch64_virt            4.3             2.3.0   YES     OK
arm_nuri                3.10.93         2.3.0   NO(1)   OK(2)
arm_versatile           4.3             2.3.0   YES     OK
arm_vexpress            4.3             2.3.0   YES     OK
microblazebe            4.3             2.3.0   YES     OK
microblazeel            4.3             2.3.0   YES     OK
mips64el_malta          4.3             2.3.0   YES     OK
mips64_malta            4.3             2.3.0   YES     OK
mipsel_malta            4.3             2.3.0   YES     OK
mips_malta              4.3             2.3.0   YES     OK
ppc_g3beige             4.3             2.3.0   YES     OK
ppc_mpc8544ds           4.3             2.3.0   YES     OK
ppc_virtex_ml507        4.3             2.3.0   NO      OK
ppc64_pseries           4.3             2.3.0   YES     OK
sh4                     4.3             2.3.0   YES     OK
sh4eb                   4.3             2.3.0   NO(1)   OK
sparc_ss10              4.3             2.3.0   YES     OK
sparc64_sun4u           4.3             2.3.0   YES     OK
sparc_sun4u             4.3             2.3.0   YES     OK
x86                     4.2.6           2.3.0   YES     OK(3)
x86_64                  4.3             2.3.0   YES     OK
xtensa_lx60             4.3             2.3.0   YES     OK

(1) - Supposed to work but broken, probably Qemu emulation issue
(2) - In like 1/3 runs it fails to start properly
(3) - linux 4.3.0 doesn't like uclibc-based toolchains (net issues)

Signed-off-by Gustavo Zacarias <[email protected]>

---
 .../{linux-4.2.config => linux-4.3.config}         |  0
 board/qemu/aarch64-virt/readme.txt                 |  2 +-
 board/qemu/arm-nuri/readme.txt                     |  2 +-
 .../{linux-4.2.config => linux-4.3.config}         |  0
 board/qemu/arm-versatile/readme.txt                |  2 +-
 board/qemu/arm-vexpress/readme.txt                 |  2 +-
 .../{linux-4.2.config => linux-4.3.config}         |  0
 board/qemu/microblazebe-mmu/readme.txt             |  2 +-
 .../{linux-4.2.config => linux-4.3.config}         |  0
 board/qemu/microblazeel-mmu/readme.txt             |  2 +-
 .../{linux-4.2.config => linux-4.3.config}         |  0
 board/qemu/mips-malta/readme.txt                   |  2 +-
 .../{linux-4.2.config => linux-4.3.config}         |  0
 board/qemu/mips64-malta/readme.txt                 |  2 +-
 .../{linux-4.2.config => linux-4.3.config}         |  0
 board/qemu/mips64el-malta/readme.txt               |  2 +-
 .../{linux-4.2.config => linux-4.3.config}         |  0
 board/qemu/mipsel-malta/readme.txt                 |  2 +-
 .../{linux-4.2.config => linux-4.3.config}         |  0
 board/qemu/ppc-g3beige/readme.txt                  |  2 +-
 board/qemu/ppc-mpc8544ds/linux-4.3.config          | 38 ++++++++++++++++++++++
 board/qemu/ppc-mpc8544ds/readme.txt                |  3 +-
 .../{linux-4.2.config => linux-4.3.config}         |  0
 board/qemu/ppc-virtex-ml507/readme.txt             |  2 +-
 board/qemu/ppc64-pseries/readme.txt                |  2 +-
 .../sh4-r2d/{linux-4.2.config => linux-4.3.config} |  0
 board/qemu/sh4-r2d/readme.txt                      |  2 +-
 .../{linux-4.2.config => linux-4.3.config}         |  0
 board/qemu/sh4eb-r2d/readme.txt                    |  2 +-
 .../{linux-4.2.config => linux-4.3.config}         |  0
 board/qemu/sparc-ss10/readme.txt                   |  2 +-
 .../{linux-4.1.config => linux-4.3.config}         |  4 +--
 board/qemu/sparc64-sun4u/readme.txt                |  2 +-
 board/qemu/x86/readme.txt                          |  2 +-
 board/qemu/x86_64/linux-4.3.config                 | 23 +++++++++++++
 ...config~2c313f8e7b5a8f665e56ea1c13b7b44d95a92932 | 23 +++++++++++++
 board/qemu/x86_64/readme.txt                       |  2 +-
 .../{linux-4.2.config => linux-4.3.config}         |  0
 board/qemu/xtensa-lx60/readme.txt                  |  2 +-
 configs/qemu_aarch64_virt_defconfig                | 10 +++---
 configs/qemu_arm_nuri_defconfig                    |  4 +--
 configs/qemu_arm_versatile_defconfig               | 10 +++---
 configs/qemu_arm_vexpress_defconfig                |  8 ++---
 configs/qemu_microblazebe_mmu_defconfig            | 10 +++---
 configs/qemu_microblazeel_mmu_defconfig            | 10 +++---
 configs/qemu_mips64_malta_defconfig                | 10 +++---
 configs/qemu_mips64el_malta_defconfig              | 10 +++---
 configs/qemu_mips_malta_defconfig                  | 10 +++---
 configs/qemu_mipsel_malta_defconfig                | 10 +++---
 configs/qemu_ppc64_pseries_defconfig               |  8 ++---
 configs/qemu_ppc_g3beige_defconfig                 | 10 +++---
 configs/qemu_ppc_mpc8544ds_defconfig               | 11 ++++---
 configs/qemu_ppc_virtex_ml507_defconfig            | 10 +++---
 configs/qemu_sh4_r2d_defconfig                     | 10 +++---
 configs/qemu_sh4eb_r2d_defconfig                   | 10 +++---
 configs/qemu_sparc64_sun4u_defconfig               | 10 +++---
 configs/qemu_sparc_ss10_defconfig                  | 10 +++---
 configs/qemu_x86_64_defconfig                      | 10 +++---
 configs/qemu_x86_defconfig                         |  4 +--
 configs/qemu_xtensa_lx60_defconfig                 | 10 +++---
 60 files changed, 204 insertions(+), 122 deletions(-)
 rename board/qemu/aarch64-virt/{linux-4.2.config => linux-4.3.config} (100%)
 rename board/qemu/arm-versatile/{linux-4.2.config => linux-4.3.config} (100%)
 rename board/qemu/microblazebe-mmu/{linux-4.2.config => linux-4.3.config} (100%)
 rename board/qemu/microblazeel-mmu/{linux-4.2.config => linux-4.3.config} (100%)
 rename board/qemu/mips-malta/{linux-4.2.config => linux-4.3.config} (100%)
 rename board/qemu/mips64-malta/{linux-4.2.config => linux-4.3.config} (100%)
 rename board/qemu/mips64el-malta/{linux-4.2.config => linux-4.3.config} (100%)
 rename board/qemu/mipsel-malta/{linux-4.2.config => linux-4.3.config} (100%)
 rename board/qemu/ppc-g3beige/{linux-4.2.config => linux-4.3.config} (100%)
 create mode 100644 board/qemu/ppc-mpc8544ds/linux-4.3.config
 rename board/qemu/ppc-virtex-ml507/{linux-4.2.config => linux-4.3.config} (100%)
 rename board/qemu/sh4-r2d/{linux-4.2.config => linux-4.3.config} (100%)
 rename board/qemu/sh4eb-r2d/{linux-4.2.config => linux-4.3.config} (100%)
 rename board/qemu/sparc-ss10/{linux-4.2.config => linux-4.3.config} (100%)
 rename board/qemu/sparc64-sun4u/{linux-4.1.config => linux-4.3.config} (86%)
 create mode 100644 board/qemu/x86_64/linux-4.3.config
 create mode 100644 board/qemu/x86_64/linux-4.3.config~2c313f8e7b5a8f665e56ea1c13b7b44d95a92932
 rename board/qemu/xtensa-lx60/{linux-4.2.config => linux-4.3.config} (100%)

board/qemu/aarch64-virt/linux-4.3.config renamed from board/qemu/aarch64-virt/linux-4.2.config +0 -0

similarity index 100%
rename from board/qemu/aarch64-virt/linux-4.2.config
rename to board/qemu/aarch64-virt/linux-4.3.config

board/qemu/aarch64-virt/readme.txt +1 -1

index 097760c..d43fe09 100644
@@ -4,4 +4,4 @@ Run the emulation with:
 
 The login prompt will appear in the terminal that started Qemu.
 
-Tested with QEMU 2.2.1
+Tested with QEMU 2.3.0

board/qemu/arm-nuri/readme.txt +1 -1

index d7a6428..df07a5c 100644
@@ -8,4 +8,4 @@ graphical window is the framebuffer.
 Startup time is slow because of the SMP CPU emulation so be patient.
 This emulation is known to be flaky.
 
-Tested with QEMU 2.2.1
+Tested with QEMU 2.3.0

board/qemu/arm-versatile/linux-4.3.config renamed from board/qemu/arm-versatile/linux-4.2.config +0 -0

similarity index 100%
rename from board/qemu/arm-versatile/linux-4.2.config
rename to board/qemu/arm-versatile/linux-4.3.config

board/qemu/arm-versatile/readme.txt +1 -1

index af65d05..1812994 100644
@@ -5,4 +5,4 @@ Run the emulation with:
 The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer.
 
-Tested with QEMU 2.2.1
+Tested with QEMU 2.3.0

board/qemu/arm-vexpress/readme.txt +1 -1

index c8f24be..a3dc6e4 100644
@@ -5,4 +5,4 @@ Run the emulation with:
 The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer.
 
-Tested with QEMU 2.2.1
+Tested with QEMU 2.3.0

board/qemu/microblazebe-mmu/linux-4.3.config renamed from board/qemu/microblazebe-mmu/linux-4.2.config +0 -0

similarity index 100%
rename from board/qemu/microblazebe-mmu/linux-4.2.config
rename to board/qemu/microblazebe-mmu/linux-4.3.config

board/qemu/microblazebe-mmu/readme.txt +1 -1

index 9f93ab5..9ade6fb 100644
@@ -4,4 +4,4 @@ Run the emulation with:
 
 The login prompt will appear in the terminal that started Qemu.
 
-Tested with QEMU 2.2.1
+Tested with QEMU 2.3.0

board/qemu/microblazeel-mmu/linux-4.3.config renamed from board/qemu/microblazeel-mmu/linux-4.2.config +0 -0

similarity index 100%
rename from board/qemu/microblazeel-mmu/linux-4.2.config
rename to board/qemu/microblazeel-mmu/linux-4.3.config

board/qemu/microblazeel-mmu/readme.txt +1 -1

index 230527d..005ea63 100644
@@ -4,4 +4,4 @@ Run the emulation with:
 
 The login prompt will appear in the terminal that started Qemu.
 
-Tested with QEMU 2.2.1
+Tested with QEMU 2.3.0

board/qemu/mips-malta/linux-4.3.config renamed from board/qemu/mips-malta/linux-4.2.config +0 -0

similarity index 100%
rename from board/qemu/mips-malta/linux-4.2.config
rename to board/qemu/mips-malta/linux-4.3.config

board/qemu/mips-malta/readme.txt +1 -1

index 2c96059..96c952c 100644
@@ -6,4 +6,4 @@ The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer. No keyboard support has been
 enabled.
 
-Tested with QEMU 2.2.1
+Tested with QEMU 2.3.0

board/qemu/mips64-malta/linux-4.3.config renamed from board/qemu/mips64-malta/linux-4.2.config +0 -0

similarity index 100%
rename from board/qemu/mips64-malta/linux-4.2.config
rename to board/qemu/mips64-malta/linux-4.3.config

board/qemu/mips64-malta/readme.txt +1 -1

index 80c9310..9aa7aa1 100644
@@ -5,4 +5,4 @@ Run the emulation with:
 The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer.
 
-Tested with QEMU 2.2.1
+Tested with QEMU 2.3.0

board/qemu/mips64el-malta/linux-4.3.config renamed from board/qemu/mips64el-malta/linux-4.2.config +0 -0

similarity index 100%
rename from board/qemu/mips64el-malta/linux-4.2.config
rename to board/qemu/mips64el-malta/linux-4.3.config

board/qemu/mips64el-malta/readme.txt +1 -1

index 82ab883..d6da29b 100644
@@ -5,4 +5,4 @@ Run the emulation with:
 The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer.
 
-Tested with QEMU 2.2.1
+Tested with QEMU 2.3.0

board/qemu/mipsel-malta/linux-4.3.config renamed from board/qemu/mipsel-malta/linux-4.2.config +0 -0

similarity index 100%
rename from board/qemu/mipsel-malta/linux-4.2.config
rename to board/qemu/mipsel-malta/linux-4.3.config

board/qemu/mipsel-malta/readme.txt +1 -1

index a77eb88..7dbb50b 100644
@@ -6,4 +6,4 @@ The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer. No keyboard support has been
 enabled.
 
-Tested with QEMU 2.2.1
+Tested with QEMU 2.3.0

board/qemu/ppc-g3beige/linux-4.3.config renamed from board/qemu/ppc-g3beige/linux-4.2.config +0 -0

similarity index 100%
rename from board/qemu/ppc-g3beige/linux-4.2.config
rename to board/qemu/ppc-g3beige/linux-4.3.config

board/qemu/ppc-g3beige/readme.txt +1 -1

index cd358b3..fd19b68 100644
@@ -5,4 +5,4 @@ Run the emulation with:
 The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer.
 
-Tested with QEMU 2.2.1
+Tested with QEMU 2.3.0

board/qemu/ppc-mpc8544ds/linux-4.3.config new file +38 -0

new file mode 100644
index 0000000..b36847c
@@ -0,0 +1,38 @@
+CONFIG_PPC_85xx=y
+CONFIG_PHYS_64BIT=y
+CONFIG_SYSVIPC=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE="${BR_BINARIES_DIR}/rootfs.cpio"
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MPC8540_ADS=y
+CONFIG_MPC85xx_DS=y
+CONFIG_HIGHMEM=y
+CONFIG_MATH_EMULATION=y
+CONFIG_PCI=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCI_MSI=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_NETDEVICES=y
+CONFIG_E1000=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=6
+CONFIG_SERIAL_8250_RUNTIME_UARTS=6
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_FSL=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_TMPFS=y

board/qemu/ppc-mpc8544ds/readme.txt +1 -2

index 8a3374f..0ade52c 100644
@@ -4,5 +4,4 @@ Run the emulation with:
 
 The login prompt will appear in the terminal that started Qemu.
 
-Tested with QEMU 2.0.2
-QEMU 2.1.x and 2.2.x are known broken.
+Tested with QEMU 2.3.0

board/qemu/ppc-virtex-ml507/linux-4.3.config renamed from board/qemu/ppc-virtex-ml507/linux-4.2.config +0 -0

similarity index 100%
rename from board/qemu/ppc-virtex-ml507/linux-4.2.config
rename to board/qemu/ppc-virtex-ml507/linux-4.3.config

board/qemu/ppc-virtex-ml507/readme.txt +1 -1

index 0cf1f9d..a25ed48 100644
@@ -4,4 +4,4 @@ Run the emulation with:
 
 The login prompt will appear in the terminal that started Qemu.
 
-Tested with QEMU 2.2.1
+Tested with QEMU 2.3.0

board/qemu/ppc64-pseries/readme.txt +1 -1

index 718da6f..0dd1682 100644
@@ -4,4 +4,4 @@ Run the emulation with:
 
 The login prompt will appear in the terminal that started Qemu.
 
-Tested with QEMU 2.2.1
+Tested with QEMU 2.3.0

board/qemu/sh4-r2d/linux-4.3.config renamed from board/qemu/sh4-r2d/linux-4.2.config +0 -0

similarity index 100%
rename from board/qemu/sh4-r2d/linux-4.2.config
rename to board/qemu/sh4-r2d/linux-4.3.config

board/qemu/sh4-r2d/readme.txt +1 -1

index b7476b9..d877bbf 100644
@@ -5,4 +5,4 @@ Run the emulation with:
 The login prompt will appear in the terminal that started Qemu.
 The graphical window is the framebuffer.
 
-Tested with QEMU 2.2.1
+Tested with QEMU 2.3.0

board/qemu/sh4eb-r2d/linux-4.3.config renamed from board/qemu/sh4eb-r2d/linux-4.2.config +0 -0

similarity index 100%
rename from board/qemu/sh4eb-r2d/linux-4.2.config
rename to board/qemu/sh4eb-r2d/linux-4.3.config

board/qemu/sh4eb-r2d/readme.txt +1 -1

index 23198ba..7f5eec4 100644
@@ -5,4 +5,4 @@ Run the emulation with:
 The login prompt will appear in the terminal that started Qemu.
 The graphical window is the framebuffer.
 
-Tested with QEMU 2.4.0.1
+Tested with QEMU 2.3.0

board/qemu/sparc-ss10/linux-4.3.config renamed from board/qemu/sparc-ss10/linux-4.2.config +0 -0

similarity index 100%
rename from board/qemu/sparc-ss10/linux-4.2.config
rename to board/qemu/sparc-ss10/linux-4.3.config

board/qemu/sparc-ss10/readme.txt +1 -1

index 1972a11..1e27380 100644
@@ -4,4 +4,4 @@ Run the emulation with:
 
 The login prompt will appear in the terminal that started Qemu.
 
-Tested with QEMU 2.2.1
+Tested with QEMU 2.3.0

board/qemu/sparc64-sun4u/linux-4.3.config renamed from board/qemu/sparc64-sun4u/linux-4.1.config +1 -3

similarity index 86%
rename from board/qemu/sparc64-sun4u/linux-4.1.config
rename to board/qemu/sparc64-sun4u/linux-4.3.config
index 2b282f9..7eda705 100644
@@ -1,4 +1,3 @@
-# CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_NO_HZ_IDLE=y

@@ -16,11 +15,10 @@ CONFIG_BLK_DEV_SD=y
 CONFIG_ATA=y
 CONFIG_PATA_CMD64X=y
 CONFIG_NETDEVICES=y
-CONFIG_NE2K_PCI=y
+CONFIG_E1000_PCI=y
 CONFIG_SERIAL_SUNSU=y
 CONFIG_SERIAL_SUNSU_CONSOLE=y
 CONFIG_EXT4_FS=y
-CONFIG_EXT4_USE_FOR_EXT23=y 
 CONFIG_TMPFS=y
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="utf-8"

board/qemu/sparc64-sun4u/readme.txt +1 -1

index 90d1edc..9b37394 100644
@@ -1,6 +1,6 @@
 Run the emulation with:
 
-  qemu-system-sparc64 -M sun4u -kernel output/images/vmlinux -append "root=/dev/sda console=ttyS0,115200" -serial stdio output/images/rootfs.ext2
+  qemu-system-sparc64 -M sun4u -kernel output/images/vmlinux -append "root=/dev/sda console=ttyS0,115200" -serial stdio output/images/rootfs.ext2 -net nic,model=e1000 -net user
 
 The login prompt will appear in the terminal that started Qemu.

board/qemu/x86/readme.txt +1 -1

index 85d5c60..daf62f4 100644
@@ -4,4 +4,4 @@ Run the emulation with:
 
 The login prompt will appear in the graphical window.
 
-Tested with QEMU 2.2.1
+Tested with QEMU 2.3.0

board/qemu/x86_64/linux-4.3.config new file +23 -0

new file mode 100644
index 0000000..20726c3
@@ -0,0 +1,23 @@
+CONFIG_SYSVIPC=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_ATA=y
+CONFIG_ATA_PIIX=y
+CONFIG_NETDEVICES=y
+CONFIG_NE2K_PCI=y
+CONFIG_8139CP=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_HDA_INTEL=y
+CONFIG_SND_HDA_GENERIC=y
+CONFIG_EXT4_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_DRM=y
+CONFIG_DRM_QXL=y

board/qemu/x86_64/linux-4.3.config~2c313f8e7b5a8f665e56ea1c13b7b44d95a92932 new file +23 -0

new file mode 100644
index 0000000..20726c3
@@ -0,0 +1,23 @@
+CONFIG_SYSVIPC=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_ATA=y
+CONFIG_ATA_PIIX=y
+CONFIG_NETDEVICES=y
+CONFIG_NE2K_PCI=y
+CONFIG_8139CP=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_HDA_INTEL=y
+CONFIG_SND_HDA_GENERIC=y
+CONFIG_EXT4_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_DRM=y
+CONFIG_DRM_QXL=y

board/qemu/x86_64/readme.txt +1 -1

index d397a79..cfd52ee 100644
@@ -4,4 +4,4 @@ Run the emulation with:
 
 The login prompt will appear in the graphical window.
 
-Tested with QEMU 2.2.1
+Tested with QEMU 2.3.0

board/qemu/xtensa-lx60/linux-4.3.config renamed from board/qemu/xtensa-lx60/linux-4.2.config +0 -0

similarity index 100%
rename from board/qemu/xtensa-lx60/linux-4.2.config
rename to board/qemu/xtensa-lx60/linux-4.3.config

board/qemu/xtensa-lx60/readme.txt +1 -1

index 2dad34a..04393ea 100644
@@ -4,4 +4,4 @@ Run the emulation with:
 
 The login prompt will appear in the terminal that started Qemu.
 
-Tested with QEMU 2.2.1
+Tested with QEMU 2.3.0

configs/qemu_aarch64_virt_defconfig +5 -5

index 23bd9b2..c39fd81 100644
@@ -8,14 +8,14 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0"
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_TARGET_ROOTFS_INITRAMFS=y
 
-# Lock to 4.2 headers to avoid breaking with newer kernels
+# Lock to 4.3 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="4.2"
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_2=y
+BR2_DEFAULT_KERNEL_VERSION="4.3"
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_3=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.2"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.3"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/aarch64-virt/linux-4.2.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/aarch64-virt/linux-4.3.config"

configs/qemu_arm_nuri_defconfig +2 -2

index dad8638..d2e522f 100644
@@ -16,12 +16,12 @@ BR2_TARGET_ROOTFS_INITRAMFS=y
 # Lock to 3.10 headers to avoid breaking with newer kernels
 # Stuck at 3.10.x because there's no Nuri DTS
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="3.10.87"
+BR2_DEFAULT_KERNEL_VERSION="3.10.92"
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_10=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.10.87"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.10.92"
 BR2_LINUX_KERNEL_DEFCONFIG="exynos4"
 BR2_LINUX_KERNEL_ZIMAGE=y

configs/qemu_arm_versatile_defconfig +5 -5

index 9a69c49..1ce55d0 100644
@@ -10,15 +10,15 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Lock to 4.2 headers to avoid breaking with newer kernels
+# Lock to 4.3 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="4.2"
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_2=y
+BR2_DEFAULT_KERNEL_VERSION="4.3"
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_3=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.2"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.3"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/arm-versatile/linux-4.2.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/arm-versatile/linux-4.3.config"
 BR2_LINUX_KERNEL_ZIMAGE=y

configs/qemu_arm_vexpress_defconfig +4 -4

index 135812a..b036c6b 100644
@@ -13,15 +13,15 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Lock to 4.2 headers to avoid breaking with newer kernels
+# Lock to 4.3 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="4.2"
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_2=y
+BR2_DEFAULT_KERNEL_VERSION="4.3"
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_3=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.2"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.3"
 BR2_LINUX_KERNEL_DEFCONFIG="vexpress"
 BR2_LINUX_KERNEL_ZIMAGE=y
 BR2_LINUX_KERNEL_DTS_SUPPORT=y

configs/qemu_microblazebe_mmu_defconfig +5 -5

index f623f6c..5730e4c 100644
@@ -9,16 +9,16 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyUL0"
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_TARGET_ROOTFS_INITRAMFS=y
 
-# Lock to 4.2 headers to avoid breaking with newer kernels
+# Lock to 4.3 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="4.2"
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_2=y
+BR2_DEFAULT_KERNEL_VERSION="4.3"
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_3=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.2"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.3"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazebe-mmu/linux-4.2.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazebe-mmu/linux-4.3.config"
 BR2_LINUX_KERNEL_LINUX_BIN=y
 BR2_LINUX_KERNEL_PATCH="board/qemu/microblazebe-mmu/xilinx-xemaclite.patch"

configs/qemu_microblazeel_mmu_defconfig +5 -5

index 151e2f1..8f95c82 100644
@@ -9,16 +9,16 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyUL0"
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_TARGET_ROOTFS_INITRAMFS=y
 
-# Lock to 4.2 headers to avoid breaking with newer kernels
+# Lock to 4.3 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="4.2"
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_2=y
+BR2_DEFAULT_KERNEL_VERSION="4.3"
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_3=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.2"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.3"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazeel-mmu/linux-4.2.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazeel-mmu/linux-4.3.config"
 BR2_LINUX_KERNEL_LINUX_BIN=y
 BR2_LINUX_KERNEL_PATCH="board/qemu/microblazeel-mmu/xilinx-xemaclite.patch"

configs/qemu_mips64_malta_defconfig +5 -5

index 2a2e576..94dfb54 100644
@@ -6,17 +6,17 @@ BR2_MIPS_NABI64=y
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Lock to 4.2 headers to avoid breaking with newer kernels
+# Lock to 4.3 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="4.2"
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_2=y
+BR2_DEFAULT_KERNEL_VERSION="4.3"
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_3=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.2"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.3"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64-malta/linux-4.2.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64-malta/linux-4.3.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Serial port config

configs/qemu_mips64el_malta_defconfig +5 -5

index d5f9cc9..88828fe 100644
@@ -6,17 +6,17 @@ BR2_MIPS_NABI64=y
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Lock to 4.2 headers to avoid breaking with newer kernels
+# Lock to 4.3 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="4.2"
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_2=y
+BR2_DEFAULT_KERNEL_VERSION="4.3"
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_3=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.2"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.3"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64el-malta/linux-4.2.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64el-malta/linux-4.3.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Serial port config

configs/qemu_mips_malta_defconfig +5 -5

index ffd2cbc..e6f6a95 100644
@@ -6,17 +6,17 @@ BR2_mips_32r2=y
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Lock to 4.2 headers to avoid breaking with newer kernels
+# Lock to 4.3 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="4.2"
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_2=y
+BR2_DEFAULT_KERNEL_VERSION="4.3"
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_3=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.2"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.3"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips-malta/linux-4.2.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips-malta/linux-4.3.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Serial port config

configs/qemu_mipsel_malta_defconfig +5 -5

index fb6af73..b14e70c 100644
@@ -6,17 +6,17 @@ BR2_mips_32r2=y
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Lock to 4.2 headers to avoid breaking with newer kernels
+# Lock to 4.3 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="4.2"
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_2=y
+BR2_DEFAULT_KERNEL_VERSION="4.3"
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_3=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.2"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.3"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mipsel-malta/linux-4.2.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mipsel-malta/linux-4.3.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Serial port config

configs/qemu_ppc64_pseries_defconfig +4 -4

index b337b48..97e53b4 100644
@@ -10,14 +10,14 @@ BR2_TARGET_GENERIC_GETTY_PORT="hvc0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Lock to 4.2 headers to avoid breaking with newer kernels
+# Lock to 4.3 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="4.2"
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_2=y
+BR2_DEFAULT_KERNEL_VERSION="4.3"
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_3=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.2"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.3"
 BR2_LINUX_KERNEL_DEFCONFIG="pseries"
 BR2_LINUX_KERNEL_VMLINUX=y

configs/qemu_ppc_g3beige_defconfig +5 -5

index 538decb..ae2ddcc 100644
@@ -6,17 +6,17 @@ BR2_powerpc_750=y
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Lock to 4.2 headers to avoid breaking with newer kernels
+# Lock to 4.3 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="4.2"
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_2=y
+BR2_DEFAULT_KERNEL_VERSION="4.3"
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_3=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.2"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.3"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-g3beige/linux-4.2.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-g3beige/linux-4.3.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Serial port config

configs/qemu_ppc_mpc8544ds_defconfig +6 -5

index d6b8786..198f5cd 100644
@@ -6,16 +6,17 @@ BR2_powerpc_8548=y
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_TARGET_ROOTFS_INITRAMFS=y
 
-# Lock to 4.2 headers to avoid breaking with newer kernels
+# Lock to 4.3 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="4.2"
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_2=y
+BR2_DEFAULT_KERNEL_VERSION="4.3"
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_3=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.2"
-BR2_LINUX_KERNEL_DEFCONFIG="mpc85xx"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.3"
+BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-mpc8544ds/linux-4.3.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Serial port config

configs/qemu_ppc_virtex_ml507_defconfig +5 -5

index d82c2dd..71f1492 100644
@@ -6,10 +6,10 @@ BR2_powerpc_440=y
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_TARGET_ROOTFS_INITRAMFS=y
 
-# Lock to 4.2 headers to avoid breaking with newer kernels
+# Lock to 4.3 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="4.2"
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_2=y
+BR2_DEFAULT_KERNEL_VERSION="4.3"
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_3=y
 
 # Use soft float
 BR2_SOFT_FLOAT=y

@@ -17,9 +17,9 @@ BR2_SOFT_FLOAT=y
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.2"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.3"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-virtex-ml507/linux-4.2.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-virtex-ml507/linux-4.3.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="virtex440-ml507"

configs/qemu_sh4_r2d_defconfig +5 -5

index 951a9a7..0666ed4 100644
@@ -10,15 +10,15 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttySC1"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Lock to 4.2 headers to avoid breaking with newer kernels
+# Lock to 4.3 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="4.2"
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_2=y
+BR2_DEFAULT_KERNEL_VERSION="4.3"
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_3=y
 
 # Linux kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.2"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.3"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sh4-r2d/linux-4.2.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sh4-r2d/linux-4.3.config"
 BR2_LINUX_KERNEL_ZIMAGE=y

configs/qemu_sh4eb_r2d_defconfig +5 -5

index 4e6ea97..6680ee3 100644
@@ -10,15 +10,15 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttySC1"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Lock to 4.2 headers to avoid breaking with newer kernels
+# Lock to 4.3 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="4.2.3"
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_2=y
+BR2_DEFAULT_KERNEL_VERSION="4.3"
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_3=y
 
 # Linux kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.2.3"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.3"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sh4eb-r2d/linux-4.2.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sh4eb-r2d/linux-4.3.config"
 BR2_LINUX_KERNEL_ZIMAGE=y

configs/qemu_sparc64_sun4u_defconfig +5 -5

index 0bb4b3e..828b437 100644
@@ -6,14 +6,14 @@ BR2_sparc_v9=y
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Lock to 4.1 headers to avoid breaking with newer kernels
+# Lock to 4.3 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="4.1"
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_1=y
+BR2_DEFAULT_KERNEL_VERSION="4.3"
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_3=y
 
 # Linux kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.1"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.3"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sparc64-sun4u/linux-4.1.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sparc64-sun4u/linux-4.3.config"

configs/qemu_sparc_ss10_defconfig +5 -5

index aa063ca..3e6d7b1 100644
@@ -8,15 +8,15 @@ BR2_GLOBAL_PATCH_DIR="board/qemu/sparc-ss10"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Lock to 4.2 headers to avoid breaking with newer kernels
+# Lock to 4.3 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="4.2"
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_2=y
+BR2_DEFAULT_KERNEL_VERSION="4.3"
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_3=y
 
 # Linux kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.2"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.3"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sparc-ss10/linux-4.2.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sparc-ss10/linux-4.3.config"
 BR2_LINUX_KERNEL_ZIMAGE=y

configs/qemu_x86_64_defconfig +5 -5

index cf877ae..daf32cd 100644
@@ -9,14 +9,14 @@ BR2_TARGET_GENERIC_GETTY_PORT="tty1"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Lock to 4.2 headers to avoid breaking with newer kernels
+# Lock to 4.3 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="4.2"
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_2=y
+BR2_DEFAULT_KERNEL_VERSION="4.3"
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_3=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.2"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.3"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-4.2.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-4.3.config"

configs/qemu_x86_defconfig +2 -2

index 4491672..f2e2022 100644
@@ -12,12 +12,12 @@ BR2_TARGET_ROOTFS_EXT2=y
 
 # Lock to 4.2 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="4.2"
+BR2_DEFAULT_KERNEL_VERSION="4.2.6"
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_2=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.2"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.2.6"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86/linux-4.2.config"

configs/qemu_xtensa_lx60_defconfig +5 -5

index 5c803da..526a111 100644
@@ -14,17 +14,17 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_TARGET_ROOTFS_INITRAMFS=y
 
-# Lock to 4.2 headers to avoid breaking with newer kernels
+# Lock to 4.3 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="4.2"
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_2=y
+BR2_DEFAULT_KERNEL_VERSION="4.3"
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_3=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.2"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.3"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/xtensa-lx60/linux-4.2.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/xtensa-lx60/linux-4.3.config"
 BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM=y
 BR2_LINUX_KERNEL_IMAGE_NAME="Image.elf"
 BR2_LINUX_KERNEL_IMAGE_TARGET_NAME="zImage"

Signature · 1 line

2.4.10

Waldemar Brodkorb

2015-11-12 21:14 UTC #2 lore raw

PATCH 2/2 configs/qemu: bump to the latest linux version

Hi Gustavo,
Gustavo Zacarias wrote,

Quoted 2 lines

sparc64_sun4u: ditch ne2k driver since it's useless, and add the e1000 driver which works fine.

Thx, cool.

Quoted 2 lines

x86: stick to 4.2.x kernels since 4.3 doesn't work right with uclibc (any variant) based toolchains.

Can you elaborate on this?
A quick build test worked fine for me.
Or did you had any runtime issues?

best regards
Waldemar

Gustavo Zacarias

author

2015-11-12 21:22 UTC #3 lore raw

PATCH 2/2 configs/qemu: bump to the latest linux version

Quoted 6 lines · Waldemar Brodkorb

Quoted 2 lines
x86: stick to 4.2.x kernels since 4.3 doesn't work right with uclibc (any variant) based toolchains.
Can you elaborate on this?
A quick build test worked fine for me.
Or did you had any runtime issues?

Hi Waldemar.
Just try to pull a dhcp address from the network interface. Regards.

Waldemar Brodkorb

2015-11-13 05:24 UTC #4 lore raw

PATCH 2/2 configs/qemu: bump to the latest linux version

Hi Gustavo,
Gustavo Zacarias wrote,

Quoted 5 lines · Waldemar Brodkorb

Quoted 4 lines
Quoted 3 lines
x86: stick to 4.2.x kernels since 4.3 doesn't work right with uclibc (any variant) based toolchains.

Quoted 7 lines

Quoted 3 lines
Can you elaborate on this?
A quick build test worked fine for me.
Or did you had any runtime issues?
Hi Waldemar.
Just try to pull a dhcp address from the network interface. Regards.

Fixed here:
http://cgit.uclibc-ng.org/cgi/cgit/uclibc-ng.git/commit/?h=1.0&id=e89e3af8f64bded3920f046fb8db2b95a188ff55

Best regards
Waldemar

Arnout Vandecappelle

2015-11-13 06:30 UTC #5 lore raw

PATCH 2/2 configs/qemu: bump to the latest linux version

Quoted 12 lines · Waldemar Brodkorb

Hi Gustavo,
Gustavo Zacarias wrote,
Quoted 9 lines · Waldemar Brodkorb
Quoted 7 lines
Quoted 3 lines
x86: stick to 4.2.x kernels since 4.3 doesn't work right with uclibc (any variant) based toolchains.
Can you elaborate on this?
A quick build test worked fine for me.
Or did you had any runtime issues?

Quoted 6 lines

Quoted 3 lines
Hi Waldemar.
Just try to pull a dhcp address from the network interface. Regards.
Fixed here:
http://cgit.uclibc-ng.org/cgi/cgit/uclibc-ng.git/commit/?h=1.0&id=e89e3af8f64bded3920f046fb8db2b95a188ff55

Care to send a buildroot patch that incorporates this?

BTW, will non-ng uClibc still be broken? If so, how do we deal with that?
External uClibc toolchains will still not have the fix...

Regards,
Arnout

Signature · 6 lines

Arnout Vandecappelle                          arnout at mind be
Senior Embedded Software Architect            +32-16-286500
Essensium/Mind                                http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium           BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint:  7493 020B C7E3 8618 8DEC 222C 82EB F404 F9AC 0DDF

Peter Korsgaard

2015-11-13 21:33 UTC #6 lore raw

PATCH 2/2 configs/qemu: bump to the latest linux version

Quoted 1 line

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Arnout" == Arnout Vandecappelle <[email protected]> writes:

Hi,

Quoted 1 line

BTW, will non-ng uClibc still be broken? If so, how do we deal with that?

Perhaps we can backport the patch to the legacy 0.9.33 release as well? From a quick look the code in socketcalls.c does look quite different though :/

Quoted 1 line

External uClibc toolchains will still not have the fix...

No, but it is atleast only an issue if they have been built with >= 4.3 kernel headers and _WITHOUT_ this fix.

Signature · 1 line

Bye, Peter Korsgaard

Peter Korsgaard

2015-11-13 21:29 UTC #7 lore raw

PATCH 2/2 configs/qemu: bump to the latest linux version

In reply to Waldemar Brodkorb

Quoted 14 lines

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Waldemar" == Waldemar Brodkorb <[email protected]> writes:
Hi Gustavo,
Gustavo Zacarias wrote,
Quoted 9 lines · Waldemar Brodkorb
Quoted 7 lines
Quoted 3 lines
x86: stick to 4.2.x kernels since 4.3 doesn't work right with uclibc (any variant) based toolchains.
Can you elaborate on this?
A quick build test worked fine for me.
Or did you had any runtime issues?

Quoted 6 lines

Quoted 3 lines
Hi Waldemar.
Just try to pull a dhcp address from the network interface. Regards.
Fixed here:
http://cgit.uclibc-ng.org/cgi/cgit/uclibc-ng.git/commit/?h=1.0&id=e89e3af8f64bded3920f046fb8db2b95a188ff55

Great, so I guess we should include that for uClibc-ng (and legacy uClibc) for 2015.11?

Do you know why the direct syscalls aren't working? Isn't that exactly what 9dea5dc921b5f4045a18c63eb92e84dc274d17eb was about?

Signature · 1 line

Bye, Peter Korsgaard

Peter Korsgaard

2015-11-10 22:45 UTC #8 lore raw

PATCH 1/2 linux-headers: bump 3.{10, 14}.x and 4.{1, 2}.x series

In reply to Gustavo Zacarias

Quoted 3 lines

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Gustavo" == Gustavo Zacarias <[email protected]> writes:
Signed-off-by Gustavo Zacarias <[email protected]>

Committed, thanks.

Signature · 1 line

Bye, Peter Korsgaard