rockchip: Turn on CONFIG_DEBUG_LL for firefly
PATCH 1/1 rockchip: Turn on CONFIG_DEBUG_LL for firefly
CONFIG_DEBUG_UART is enabled in defconfig, but there's no Low-level debugging functions implemented, so build fails because of undefined references to `printch' in common/console.c.
In order to fix this, enable CONFIG_DEBUG_LL.
--- configs/firefly-rk3288_defconfig | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
configs/firefly-rk3288_defconfig +3 -1
@@ -3,9 +3,11 @@ CONFIG_ARCH_ROCKCHIP=y CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_ROCKCHIP_RK3288=y CONFIG_TARGET_FIREFLY_RK3288=y +CONFIG_SPL_STACK_R_ADDR=0x80000 +CONFIG_DEBUG_LL=y +CONFIG_DEBUG_UART_PHYS=0xff690000 CONFIG_DEFAULT_DEVICE_TREE="rk3288-firefly" CONFIG_SPL_STACK_R=y -CONFIG_SPL_STACK_R_ADDR=0x80000 # CONFIG_CMD_IMLS is not set # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_PMIC=y
Signature · 1 line
2.6.2
PATCH 1/1 rockchip: Turn on CONFIG_DEBUG_LL for firefly
Quoted 5 lines · Ariel D'Alessandro
CONFIG_DEBUG_UARTis enabled in defconfig, but there's no Low-level debugging functions implemented, so build fails because of undefined references to `printch' incommon/console.c.
In order to fix this, enableCONFIG_DEBUG_LL.
I think you are fixing this the wrong way. This patch solves the problem as well, and I think it's the right way:
[patch format is probably wasted]
@@ -34,6 +34,7 @@ CONFIG_REGULATOR_ACT8846=y
CONFIG_RAM=y
CONFIG_SPL_RAM=y
CONFIG_DEBUG_UART=y
+CONFIG_DEBUG_UART_NS16550=y
CONFIG_DEBUG_UART_BASE=0xff690000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART_SHIFT=2
Without this fix, Altera JTAG UART is selected instead of NS16550. I expect other defconfigs (e.g. chromebook_jerry_defconfig) to suffer from this as well.
That said, I still haven't looked at the differences between DEBUG_LL and DEBUG_UART.
Signature · 2 lines
Ezequiel Garc?a, VanguardiaSur www.vanguardiasur.com.ar
PATCH 1/1 rockchip: Turn on CONFIG_DEBUG_LL for firefly
Eze,
El 12/11/15 a las 19:11, Ezequiel Garcia escribi?:
Quoted 21 lines
Quoted 5 lines · Ariel D'Alessandro
CONFIG_DEBUG_UARTis enabled in defconfig, but there's no Low-level debugging functions implemented, so build fails because of undefined references to `printch' incommon/console.c.
In order to fix this, enableCONFIG_DEBUG_LL.I think you are fixing this the wrong way. This patch solves the problem as well, and I think it's the right way:
[patch format is probably wasted]
(quoted diff) +1
-0@@ -34,6 +34,7 @@ CONFIG_REGULATOR_ACT8846=y CONFIG_RAM=y CONFIG_SPL_RAM=y CONFIG_DEBUG_UART=y +CONFIG_DEBUG_UART_NS16550=y CONFIG_DEBUG_UART_BASE=0xff690000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_DEBUG_UART_SHIFT=2
Quoted 1 line
Without this fix, Altera JTAG UART is selected instead of NS16550.
You're right. No UART driver is specified in defconfig, thus DEBUG_UART_ALTERA_JTAGUART is incorrectly selected by default. In fact, firefly-rk3288_defconfig got broken after the following commit was applied:
commit 220e8021af96741bd7149ca9895e1f0c8a38d0bb
Author: Thomas Chou <[email protected]>
nios2: convert altera_jtag_uart to driver model
Quoted 2 lines
I expect other defconfigs (e.g.
chromebook_jerry_defconfig) to suffer from this as well.
Yes, chromebook_jerry_defconfig has exactly the same problem.
Quoted 4 lines
That said, I still haven't looked at the differences between
DEBUG_LLandDEBUG_UART.
Signature · 2 lines
Ariel D'Alessandro, VanguardiaSur www.vanguardiasur.com.ar