Add support for dvb usb stick Hauppauge WinTV-soloHD

PATCH New Arno Bauernöppel 1 participant 1 message Nov 15, 2015

Subsystems (2)

Media (V4L/DVB) EM28XX VIDEO4LINUX driver

lore

Share & tools

lore

Arno Bauernöppel

author

2015-11-15 21:32 UTC #0 lore raw

PATCH 1/1 Add support for dvb usb stick Hauppauge WinTV-soloHD

This patch adds support for the DVB-T/C/T2 usb stick WinTV-soloHD from Hauppauge. It adds the usb ID 2040:0264 Hauppauge to the cards of the driver em28xx.

I successfully tested DVB-T/C and the IR remote control with the firmware dvb-demod-si2168-b40-01.fw.

Signed-off-by Arno Bauernoeppel <[email protected]>

---

drivers/media/dvb-core/dvb-usb-ids.h +1 -0

index 0a46580..1c1c298 100644
@@ -389,4 +389,5 @@
 #define USB_PID_PCTV_2002E_SE                           0x025d
 #define USB_PID_SVEON_STV27                             0xd3af
 #define USB_PID_TURBOX_DTT_2000                         0xd3a4
+#define USB_PID_WINTV_SOLOHD                            0x0264
 #endif

drivers/media/usb/em28xx/em28xx-cards.c +2 -0

index 3940046..875f087 100644
@@ -2471,6 +2471,8 @@ struct usb_device_id em28xx_id_table[] = {
                        .driver_info = EM28178_BOARD_PCTV_461E },
        { USB_DEVICE(0x2013, 0x025f),
                        .driver_info = EM28178_BOARD_PCTV_292E },
+       { USB_DEVICE(0x2040, 0x0264), /* Hauppauge WinTV-soloHD */
+                       .driver_info = EM28178_BOARD_PCTV_292E },
        { USB_DEVICE(0x0413, 0x6f07),
                        .driver_info = EM2861_BOARD_LEADTEK_VC100 },
        { USB_DEVICE(0xeb1a, 0x8179),