comedi: gsc_hpdi: Fix coding style - use kernel type definitions for variables

kernel type definitions are preferred for variables over standard type definitions

Signed-off-by Ranjith Thangavel <[email protected]>

---
  drivers/staging/comedi/drivers/gsc_hpdi.c |   20 ++++++++++----------
  1 file changed, 10 insertions(+), 10 deletions(-)

drivers/staging/comedi/drivers/gsc_hpdi.c +9 -9

index e929618..cc67a07 100644
@@ -125,7 +125,7 @@
 
  struct hpdi_private {
  	void __iomem *plx9080_mmio;
-	uint32_t *dio_buffer[NUM_DMA_BUFFERS];	/* dma buffers */
+	u32 *dio_buffer[NUM_DMA_BUFFERS];	/* dma buffers */
  	/* physical addresses of dma buffers */
  	dma_addr_t dio_buffer_phys_addr[NUM_DMA_BUFFERS];
  	/*

@@ -137,7 +137,7 @@ struct hpdi_private {
  	dma_addr_t dma_desc_phys_addr;
  	unsigned int num_dma_descriptors;
  	/* pointer to start of buffers indexed by descriptor */
-	uint32_t *desc_dio_buffer[NUM_DMA_DESCRIPTORS];
+	u32 *desc_dio_buffer[NUM_DMA_DESCRIPTORS];
  	/* index of the dma descriptor that is currently being used */
  	unsigned int dma_desc_index;
  	unsigned int tx_fifo_size;

@@ -192,10 +192,10 @@ static irqreturn_t gsc_hpdi_interrupt(int irq, void *d)
  	struct hpdi_private *devpriv = dev->private;
  	struct comedi_subdevice *s = dev->read_subdev;
  	struct comedi_async *async = s->async;
-	uint32_t hpdi_intr_status, hpdi_board_status;
-	uint32_t plx_status;
-	uint32_t plx_bits;
-	uint8_t dma0_status, dma1_status;
+	u32 hpdi_intr_status, hpdi_board_status;
+	u32 plx_status;
+	u32 plx_bits;
+	u8 dma0_status, dma1_status;
  	unsigned long flags;
 
  	if (!dev->attached)

@@ -290,7 +290,7 @@ static int gsc_hpdi_cmd(struct comedi_device *dev,
  	struct comedi_async *async = s->async;
  	struct comedi_cmd *cmd = &async->cmd;
  	unsigned long flags;
-	uint32_t bits;
+	u32 bits;
 
  	if (s->io_bits)
  		return -EINVAL;

@@ -424,7 +424,7 @@ static int gsc_hpdi_setup_dma_descriptors(struct comedi_device *dev,
  {
  	struct hpdi_private *devpriv = dev->private;
  	dma_addr_t phys_addr = devpriv->dma_desc_phys_addr;
-	uint32_t next_bits = PLX_DESC_IN_PCI_BIT | PLX_INTR_TERM_COUNT |
+	u32 next_bits = PLX_DESC_IN_PCI_BIT | PLX_INTR_TERM_COUNT |
  			     PLX_XFER_LOCAL_TO_PCI;
  	unsigned int offset = 0;
  	unsigned int idx = 0;

@@ -516,7 +516,7 @@ static void gsc_hpdi_free_dma(struct comedi_device *dev)
  static int gsc_hpdi_init(struct comedi_device *dev)
  {
  	struct hpdi_private *devpriv = dev->private;
-	uint32_t plx_intcsr_bits;
+	u32 plx_intcsr_bits;
 
  	/* wait 10usec after reset before accessing fifos */
  	writel(BOARD_RESET_BIT, dev->mmio + BOARD_CONTROL_REG);