branch --set-upstream-to unexpectedly fails with "starting point ... is no branch"
There is a strange "branch --set-upstream-to" failure for "clones" which haven't been created using "git clone" but constructed using "git init", "git remote add" and "git fetch".
Following script first creates a "main" repository and then constructs the clone. Finally, in the clone branches origin/1 and origin/2 will be present, however it's not possible to invoke "git branch --set-upstream-to" for origin/2 (it works fine for origin/1).
I guess the behavior is related to following line in .git/config:
fetch = refs/heads/1:refs/remotes/origin/1
However, I don't understand what's the problem for Git here? Definitely the error "starting point 'origin/2' is not a branch" is wrong.
$ git --version git version 2.5.0.windows.1
$ cd /tmp/gittest $ mkdir main $ cd main $ git init $ touch file $ git add file $ git commit -m "import" $ git branch 1 $ git branch 2 $ git branch 1 2 * master
$ cd /tmp/gittest $ mkdir clone $ cd clone $ git init Initialized empty Git repository in /tmp/gittest/clone/.git/ $ git remote add origin /tmp/gittest/main $ git config remote.origin.fetch refs/heads/1:refs/remotes/origin/1 $ git fetch origin remote: Counting objects: 3, done. remote: Total 3 (delta 0), reused 0 (delta 0) Unpacking objects: 100% (3/3), done. From /tmp/gittest/main * [new branch] 1 -> origin/1
$ git fetch origin refs/heads/2:refs/remotes/origin/2 From /tmp/gittest/main * [new branch] 2 -> origin/2
$ git branch --no-track 2 refs/remotes/origin/2 $ git branch 2
# HERE COMES THE STRANGE FAILURE:
$ git branch --set-upstream-to=origin/2 2 fatal: Cannot setup tracking information; starting point 'origin/2' is not a branch.
# THIS WORKS AS EXPECTED:
$ git branch --set-upstream-to=origin/1 2 Branch 2 set up to track remote branch 1 from origin by rebasing.
-Marc
Hello Mark,
Quoted 10 lines · Marc Strapetz
There is a strange "branch --set-upstream-to" failure for "clones" which haven't been created using "git clone" but constructed using "git init", "git remote add" and "git fetch".
Following script first creates a "main" repository and then constructs the clone. Finally, in the clone branches origin/1 and origin/2 will be present, however it's not possible to invoke "git branch --set-upstream-to" for origin/2 (it works fine for origin/1).
I guess the behavior is related to following line in .git/config:
fetch = refs/heads/1:refs/remotes/origin/1
However, I don't understand what's the problem for Git here? Definitely the error "starting point 'origin/2' is not a branch" is wrong.
That is indeed the issue. The configuration which is stored in the configuration is a remote+branch pair. If there is no fetch refspec configured which would create the ‘origin/2’ remote-tracking branch, the command does not know which remote and branch that would correspond to.
If you had ‘refs/heads/2:refs/remotes/origin/2’ then it would know, but other remote-tracking branches (e.g. ‘origin/3’) would still have an unknown source.
The error message is indeed bogus; it’s likely one of the functions assuming how it’s going to be used.
cmn
Quoted 8 lines · Carlos Martín Nieto
Hello Mark,
Quoted 4 lines · Marc Strapetz
There is a strange "branch --set-upstream-to" failure for "clones" which haven't been created using "git clone" but constructed using "git init", "git remote add" and "git fetch".
Following script first creates a "main" repository and then constructs the clone. Finally, in the clone branches origin/1 and origin/2 will be present, however it's not possible to invoke "git branch --set-upstream-to" for origin/2 (it works fine for origin/1).
Quoted 8 lines
Quoted 6 lines
I guess the behavior is related to following line in .git/config:
fetch = refs/heads/1:refs/remotes/origin/1
However, I don't understand what's the problem for Git here? Definitely the error "starting point 'origin/2' is not a branch" is wrong.
That is indeed the issue. The configuration which is stored in the configuration is a remote+branch pair. If there is no fetch refspec configured which would create the ‘origin/2’ remote-tracking branch, the command does not know which remote and branch that would correspond to.
Thanks, Carlos, I understand now.
My goal is to have a clone which will only fetch specific branches, so I guess I have to stick with "refs/heads/1:refs/remotes/origin/1" for the beginning and for every new branch X add another "refs/heads/X:refs/remotes/origin/X"? Or is there a better way?
-Marc
Quoted 13 lines · Marc Strapetz
Quoted 12 lines · Carlos Martín Nieto
Hello Mark,
Quoted 8 lines · Marc Strapetz
There is a strange "branch --set-upstream-to" failure for "clones" which haven't been created using "git clone" but constructed using "git init", "git remote add" and "git fetch".
Following script first creates a "main" repository and then constructs the clone. Finally, in the clone branches origin/1 and origin/2 will be present, however it's not possible to invoke "git branch --set-upstream-to" for origin/2 (it works fine for origin/1).
I guess the behavior is related to following line in .git/config:
fetch = refs/heads/1:refs/remotes/origin/1
Quoted 8 lines
Quoted 4 lines
Quoted 2 lines
However, I don't understand what's the problem for Git here? Definitely the error "starting point 'origin/2' is not a branch" is wrong.
That is indeed the issue. The configuration which is stored in the configuration is a remote+branch pair. If there is no fetch refspec configured which would create the ‘origin/2’ remote-tracking branch, the command does not know which remote and branch that would correspond to.
Thanks, Carlos, I understand now.
My goal is to have a clone which will only fetch specific branches, so I guess I have to stick with "refs/heads/1:refs/remotes/origin/1" for the beginning and for every new branch X add another "refs/heads/X:refs/remotes/origin/X"? Or is there a better way?
If you want fine-grained control over what gets downloaded, you’ll need to restrict either the configured refspecs or the ones which git-fetch gets.
You can configure the individual refspecs so a ‘git fetch’ call will download the ones you want, giving you the issue you mention here; or you can configure the default refspec, but always pass explicit instructions to git-fetch, like ‘git fetch refs/heads/1 refs/heads/2’. Newer git versions (past 1.9.3 I think) will update the remote-tracking bracnhes when you do it this way.
Both of these are annoying in their own way. The second way might be preferable if the fetching is done by a script. But if you absent-mindedly run a lone ‘git fetch’, then you’ll download all branches.
Cheers,
cmn
Quoted 19 lines · Carlos Martín Nieto
Quoted 16 lines · Marc Strapetz
Quoted 15 lines · Carlos Martín Nieto
Hello Mark,
Quoted 10 lines · Marc Strapetz
There is a strange "branch --set-upstream-to" failure for "clones" which haven't been created using "git clone" but constructed using "git init", "git remote add" and "git fetch".
Following script first creates a "main" repository and then constructs the clone. Finally, in the clone branches origin/1 and origin/2 will be present, however it's not possible to invoke "git branch --set-upstream-to" for origin/2 (it works fine for origin/1).
I guess the behavior is related to following line in .git/config:
fetch = refs/heads/1:refs/remotes/origin/1
However, I don't understand what's the problem for Git here? Definitely the error "starting point 'origin/2' is not a branch" is wrong.
Quoted 7 lines
Quoted 5 lines
Quoted 1 line
That is indeed the issue. The configuration which is stored in the configuration is a remote+branch pair. If there is no fetch refspec configured which would create the ‘origin/2’ remote-tracking branch, the command does not know which remote and branch that would correspond to.
Thanks, Carlos, I understand now.
My goal is to have a clone which will only fetch specific branches, so I guess I have to stick with "refs/heads/1:refs/remotes/origin/1" for the beginning and for every new branch X add another "refs/heads/X:refs/remotes/origin/X"? Or is there a better way?
If you want fine-grained control over what gets downloaded, you’ll need to restrict either the configured refspecs or the ones which git-fetch gets.
Thanks, Carlos. I'll take this approach as it's the safer one.
-Marc