zynq: ps7_init_gpl.c
hello,
The ps7_init_gpl.c is some output from the xilinix vivado tool as hardware handoff.
We compile this into our SPL.
My question is how to deal with "scripts/checkpatch.pl" on this file. The scripts throughs a lot of errors.
# scripts/checkpatch.pl -f board/xilinx/zynq/ZC702_hw_platform/ps7_init_gpl.c otal: 13009 errors, 13130 warnings, 14 checks, 13307 lines checked
NOTE: whitespace errors detected, you may wish to use scripts/cleanpatch or
scripts/cleanfile
NOTE: Ignored message types: COMPLEX_MACRO CONSIDER_KSTRTO MINMAX MULTISTATEMENT_MACRO_USE_DO_WHILE NETWORKING_BLOCK_COMMENT_STYLE USLEEP_RANGE
board/xilinx/zynq/ZC702_hw_platform/ps7_init_gpl.c has style problems, please review.
best regards,
Hannes
Hi,
Quoted 16 lines · Hannes Schmelzer
hello,
The
ps7_init_gpl.cis some output from the xilinix vivado tool as hardware handoff.
We compile this into our SPL.My question is how to deal with "
scripts/checkpatch.pl" on this file. The scripts throughs a lot of errors.# scripts/checkpatch.pl -f board/xilinx/zynq/ZC702_hw_platform/ps7_init_gpl.c otal: 13009 errors, 13130 warnings, 14 checks, 13307 lines checkedNOTE: whitespace errors detected, you may wish to use
scripts/cleanpatchor
scripts/cleanfile
Quoted 6 lines
NOTE: Ignored message types:
COMPLEX_MACROCONSIDER_KSTRTOMINMAXMULTISTATEMENT_MACRO_USE_DO_WHILENETWORKING_BLOCK_COMMENT_STYLEUSLEEP_RANGE
board/xilinx/zynq/ZC702_hw_platform/ps7_init_gpl.chas style problems, please review.
I have recommended this sequence
[u-boot]$ uncrustify --no-backup board/xilinx/zynq/ZC706_hw_platform/ps7_init_gpl.c
Parsing: board/xilinx/zynq/ZC706_hw_platform/ps7_init_gpl.c as language C [u-boot]$ ./scripts/Lindent board/xilinx/zynq/ZC706_hw_platform/ps7_init_gpl.c
[u-boot]$ ./scripts/checkpatch.pl -f board/xilinx/zynq/ZC706_hw_platform/ps7_init_gpl.c --max-line-length=200
And fix the rest by hand. That's what Nathan has done for adding zybo files.
Coding style should be hopefully fixed in 2016.1 but we will see as always.
Thanks,
Michal
Signature · 109 lines
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform
-------------- next part --------------
#
# uncrustify config file for the linux kernel
#
# http://uncrustify.sourceforge.net/config.txt
indent_with_tabs = 2 # 1=indent to level only, 2=indent with tabs
input_tab_size = 8 # original tab size
output_tab_size = 8 # new tab size
indent_columns = output_tab_size
indent_label = 1 # pos: absolute col, neg: relative column
#
# inter-symbol newlines
#
nl_enum_brace = remove # "enum {" vs "enum \n {"
nl_union_brace = remove # "union {" vs "union \n {"
nl_struct_brace = remove # "struct {" vs "struct \n {"
nl_do_brace = remove # "do {" vs "do \n {"
nl_if_brace = remove # "if () {" vs "if () \n {"
nl_for_brace = remove # "for () {" vs "for () \n {"
nl_else_brace = remove # "else {" vs "else \n {"
nl_while_brace = remove # "while () {" vs "while () \n {"
nl_switch_brace = remove # "switch () {" vs "switch () \n {"
nl_brace_while = remove # "} while" vs "} \n while" - cuddle while
nl_brace_else = remove # "} else" vs "} \n else" - cuddle else
nl_func_var_def_blk = 1
nl_fcall_brace = remove # "list_for_each() {" vs "list_for_each()\n{"
nl_fdef_brace = add # "int foo() {" vs "int foo()\n{"
# nl_after_return = TRUE;
# nl_before_case = 1
#
# Source code modifications
#
mod_paren_on_return = remove # "return 1;" vs "return (1);"
mod_full_brace_if = remove # "if (a) a--;" vs "if (a) { a--; }"
mod_full_brace_for = remove # "for () a--;" vs "for () { a--; }"
mod_full_brace_do = remove # "do a--; while ();" vs "do { a--; } while ();"
mod_full_brace_while = remove # "while (a) a--;" vs "while (a) { a--; }"
mod_full_brace_nl = 3 # don't remove if more than 3 newlines
#
# inter-character spacing options
#
# sp_return_paren = force # "return (1);" vs "return(1);"
sp_sizeof_paren = remove # "sizeof (int)" vs "sizeof(int)"
sp_before_sparen = force # "if (" vs "if("
sp_after_sparen = force # "if () {" vs "if (){"
sp_after_cast = remove # "(int) a" vs "(int)a"
sp_inside_braces = add # "{ 1 }" vs "{1}"
sp_inside_braces_struct = add # "{ 1 }" vs "{1}"
sp_inside_braces_enum = add # "{ 1 }" vs "{1}"
sp_assign = add
sp_arith = add
sp_bool = add
sp_compare = add
sp_assign = add
sp_after_comma = add
sp_func_def_paren = remove # "int foo (){" vs "int foo(){"
sp_func_call_paren = remove # "foo (" vs "foo("
sp_func_proto_paren = remove # "int foo ();" vs "int foo();"
#
# Aligning stuff
#
align_with_tabs = TRUE # use tabs to align
align_on_tabstop = TRUE # align on tabstops
# align_keep_tabs = true
align_enum_equ_span = 4 # '=' in enum definition
# align_nl_cont = TRUE
# align_var_def_span = 2
# align_var_def_inline = TRUE
# align_var_def_star = FALSE
# align_var_def_colon = TRUE
# align_assign_span = 1
align_struct_init_span = 3 # align stuff in a structure init '= { }'
align_right_cmt_span = 3
# align_pp_define_span = 8;
# align_pp_define_gap = 4;
# cmt_star_cont = FALSE
# indent_brace = 0
cmt_cpp_to_c = TRUE
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 181 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20151127/72bbd468/attachment.sig>