Skip to contentSkip to conversation

ARM: zynq: Add default ps7_init_gpl.c/h for ZYBO

PATCH New Nathan Rossi 2 participants 2 messages Nov 24, 2015 – Nov 27, 2015

Subsystems (3)
Arm (32-bit) Arm sub-architectures Arm/Zynq architecture
lore
Share & tools
lore

Nathan Rossi

author
#0 lore raw

PATCH 1/1 ARM: zynq: Add default ps7_init_gpl.c/h for ZYBO

Add ps7_init_gpl.c/h for the ZYBO board. This instance of the ps7_init is generated by the Vivado 2015.3 tools using the system configuration provided by Digilent located on their website.

Update the kconfig so that the defconfig is not overrided to use the custom init ps7_init_gpl target by default.

Signed-off-by Nathan Rossi <[email protected]>
Cc Albert Aribaud <[email protected]>
Cc Michal Simek <[email protected]>
Cc Masahiro Yamada <[email protected]>
Cc Joe Hershberger <[email protected]>
Cc "S?ren Brinkmann" <[email protected]>
---
 arch/arm/mach-zynq/Kconfig                        |     1 -
 board/xilinx/zynq/Makefile                        |     1 +
 board/xilinx/zynq/zybo_hw_platform/ps7_init_gpl.c | 11948 ++++++++++++++++++++
 board/xilinx/zynq/zybo_hw_platform/ps7_init_gpl.h |    97 +
 4 files changed, 12046 insertions(+), 1 deletion(-)
 create mode 100644 board/xilinx/zynq/zybo_hw_platform/ps7_init_gpl.c
 create mode 100644 board/xilinx/zynq/zybo_hw_platform/ps7_init_gpl.h
arch/arm/mach-zynq/Kconfig +0 -1
index afe6cc3..d396a13 100644
@@ -33,7 +33,6 @@ config TARGET_ZYNQ_ZC770
 
 config TARGET_ZYNQ_ZYBO
 	bool "Zynq Zybo Board"
-	select ZYNQ_CUSTOM_INIT
 
 endchoice
board/xilinx/zynq/Makefile +1 -0
index 88047ec..eab9303 100644
@@ -12,6 +12,7 @@ hw-platform-$(CONFIG_TARGET_ZYNQ_ZED)		:= zed_hw_platform
 hw-platform-$(CONFIG_TARGET_ZYNQ_MICROZED)	:= MicroZed_hw_platform
 hw-platform-$(CONFIG_TARGET_ZYNQ_ZC702)		:= ZC702_hw_platform
 hw-platform-$(CONFIG_TARGET_ZYNQ_ZC706)		:= ZC706_hw_platform
+hw-platform-$(CONFIG_TARGET_ZYNQ_ZYBO)		:= zybo_hw_platform
 # If you want to use customized ps7_init_gpl.c/h,
 # enable CONFIG_ZYNQ_CUSTOM_INIT and put them into custom_hw_platform/.
 # This line must be placed at the bottom of the list because
board/xilinx/zynq/zybo_hw_platform/ps7_init_gpl.c new file +11948 -0

2,986 lines not on this page · raw message

board/xilinx/zynq/zybo_hw_platform/ps7_init_gpl.h new file +97 -0

97 lines not on this page · raw message

The rest of this diff is not shown. View the raw message.

Signature · 1 line
2.6.2

Part of the diff is not shown here. View the raw message.

Applied
#1 lore raw

PATCH 1/1 ARM: zynq: Add default ps7_init_gpl.c/h for ZYBO

Quoted 13 lines · Nathan Rossi

Add ps7_init_gpl.c/h for the ZYBO board. This instance of the ps7_init is generated by the Vivado 2015.3 tools using the system configuration provided by Digilent located on their website.

Update the kconfig so that the defconfig is not overrided to use the custom init ps7_init_gpl target by default.

Signed-off-by Nathan Rossi <[email protected]>
Cc Albert Aribaud <[email protected]>
Cc Michal Simek <[email protected]>
Cc Masahiro Yamada <[email protected]>
Cc Joe Hershberger <[email protected]>
Cc "S?ren Brinkmann" <[email protected]>
Quoted 8 lines
---
 arch/arm/mach-zynq/Kconfig                        |     1 -
 board/xilinx/zynq/Makefile                        |     1 +
 board/xilinx/zynq/zybo_hw_platform/ps7_init_gpl.c | 11948 ++++++++++++++++++++
 board/xilinx/zynq/zybo_hw_platform/ps7_init_gpl.h |    97 +
 4 files changed, 12046 insertions(+), 1 deletion(-)
 create mode 100644 board/xilinx/zynq/zybo_hw_platform/ps7_init_gpl.c
 create mode 100644 board/xilinx/zynq/zybo_hw_platform/ps7_init_gpl.h

Applied.

Thanks,
Michal

Signature · 15 lines
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform



-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 181 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20151127/0ca5563a/attachment.sig>