core: use merged /usr in staging (branch merged-usr-staging)
cover core: use merged /usr in staging (branch merged-usr-staging)
Hello All!
As reported by Pieterjan, when doing remote debugging with gdbserver on a merged /usr setup, the remote gdb would only look for libraries in staging/lib and never in staging/usr/lib.
This series replicates in staging the same merged /usr handling as we have for target/.
This is implemented in the skeleton package, as it is the only easy place that is guaranteed to be before all other packages *and* before the toolchains.
Regards,
Yann E. MORIN.
The following changes since commit 66fb7028ed2779fcba45221143d6d2c5b9084303:
strongswan: bump to version 5.3.5 (2015-11-26 21:23:18 +0100)
are available in the git repository at:
git://git.busybox.net/~ymorin/git/buildroot merged-usr-staging
for you to fetch changes up to 0934812eeec64cb2cdc2b7600879b53695859652:
package/skeleton: also handle merged /usr in the staging (2015-11-26 23:00:48 +0100)
----------------------------------------------------------------
Yann E. MORIN (2):
package/skeleton: parametrise the symlinks-or-mkdir macro package/skeleton: also handle merged /usr in the staging
Makefile | 9 ++------ package/skeleton/skeleton.mk | 49 ++++++++++++++++++++++++++++++-------------- 2 files changed, 36 insertions(+), 22 deletions(-)
Signature · 6 lines
.-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------'
PATCH 1/2 package/skeleton: parametrise the symlinks-or-mkdir macro
currently, we only make the merged symlinks or non-merged mkdirs in the target directory. This is fine, as long as one does not run gdb.
However, as soon as one wants to run gdb (or gdbserver) on the target, gdb will only search for libraries in /lib in the sysroot.
In preparation for a patch to fix that, make the symlink-or-mkdir macro a function that takes as parameter the base directory where to create symlinks or mkdir in.
Move the function declarations our of the custom/non-custom skeleton conditional block, so they are always available.
--- package/skeleton/skeleton.mk | 31 ++++++++++++++++--------------- 1 file changed, 16 insertions(+), 15 deletions(-)
package/skeleton/skeleton.mk +16 -15
@@ -57,27 +57,28 @@ else # ! custom skeleton SKELETON_PATH = system/skeleton -ifeq ($(BR2_ROOTFS_MERGED_USR),y) -define SKELETON_USR_SYMLINKS_OR_DIRS - ln -snf usr/bin $(TARGET_DIR)/bin - ln -snf usr/sbin $(TARGET_DIR)/sbin - ln -snf usr/lib $(TARGET_DIR)/lib -endef -else -define SKELETON_USR_SYMLINKS_OR_DIRS - $(INSTALL) -d -m 0755 $(TARGET_DIR)/bin - $(INSTALL) -d -m 0755 $(TARGET_DIR)/sbin - $(INSTALL) -d -m 0755 $(TARGET_DIR)/lib -endef -endif - endif # ! custom skeleton +# This function handles the merged or non-merged /usr cases +ifeq ($(BR2_ROOTFS_MERGED_USR),y) +define SKELETON_USR_SYMLINKS_OR_DIRS + ln -snf usr/bin $(1)/bin + ln -snf usr/sbin $(1)/sbin + ln -snf usr/lib $(1)/lib +endef +else +define SKELETON_USR_SYMLINKS_OR_DIRS + $(INSTALL) -d -m 0755 $(1)/bin + $(INSTALL) -d -m 0755 $(1)/sbin + $(INSTALL) -d -m 0755 $(1)/lib +endef +endif + define SKELETON_INSTALL_TARGET_CMDS rsync -a --ignore-times $(SYNC_VCS_EXCLUSIONS) \ --chmod=u=rwX,go=rX --exclude .empty --exclude '*~' \ $(SKELETON_PATH)/ $(TARGET_DIR)/ - $(SKELETON_USR_SYMLINKS_OR_DIRS) + $(call SKELETON_USR_SYMLINKS_OR_DIRS,$(TARGET_DIR)) ln -snf lib $(TARGET_DIR)/$(LIB_SYMLINK) ln -snf lib $(TARGET_DIR)/usr/$(LIB_SYMLINK) $(INSTALL) -m 0644 support/misc/target-dir-warning.txt \
Signature · 1 line
1.9.1
PATCH 1/2 package/skeleton: parametrise the symlinks-or-mkdir macro
Quoted 13 lines · Yann E. MORIN
currently, we only make the merged symlinks or non-merged mkdirs in the target directory. This is fine, as long as one does not run gdb.
However, as soon as one wants to run gdb (or gdbserver) on the target, gdb will only search for libraries in /lib in the sysroot.
In preparation for a patch to fix that, make the symlink-or-mkdir macro a function that takes as parameter the base directory where to create symlinks or mkdir in.
Move the function declarations our of the custom/non-custom skeleton conditional block, so they are always available.
Quoted 6 lines
Reported-by Pieterjan Camerlynck <[email protected]>Signed-off-by "Yann E. MORIN" <[email protected]>Cc Pieterjan Camerlynck <[email protected]>Cc Maxime Hadjinlian <[email protected]>Cc Peter Korsgaard <[email protected]>Cc Thomas Petazzoni <[email protected]>
But...
Quoted 21 lines
--- package/skeleton/skeleton.mk | 31 ++++++++++++++++--------------- 1 file changed, 16 insertions(+), 15 deletions(-)package/skeleton/skeleton.mk +0
-9@@ -57,27 +57,28 @@ else # ! custom skeleton SKELETON_PATH = system/skeleton -ifeq ($(BR2_ROOTFS_MERGED_USR),y) -define SKELETON_USR_SYMLINKS_OR_DIRS - ln -snf usr/bin $(TARGET_DIR)/bin - ln -snf usr/sbin $(TARGET_DIR)/sbin - ln -snf usr/lib $(TARGET_DIR)/lib -endef -else -define SKELETON_USR_SYMLINKS_OR_DIRS - $(INSTALL) -d -m 0755 $(TARGET_DIR)/bin
package/skeleton/skeleton.mk else # ! custom skeleton · line 64
Quoted 10 lines
package/skeleton/skeleton.mk +3
-5- $(INSTALL) -d -m 0755 $(TARGET_DIR)/sbin - $(INSTALL) -d -m 0755 $(TARGET_DIR)/lib -endef -endif - endif # ! custom skeleton +# This function handles the merged or non-merged /usr cases +ifeq ($(BR2_ROOTFS_MERGED_USR),y) +define SKELETON_USR_SYMLINKS_OR_DIRS
We usually make functions lowercase rather than uppercase, although there are
notable exceptions like MESSAGE and UPPERCASE.
But since it's specific to the skeleton package, it's probably better to keep
it uppercase.
Regards,
Arnout
Quoted 22 lines
package/skeleton/skeleton.mk +13
-1+ ln -snf usr/bin $(1)/bin + ln -snf usr/sbin $(1)/sbin + ln -snf usr/lib $(1)/lib +endef +else +define SKELETON_USR_SYMLINKS_OR_DIRS + $(INSTALL) -d -m 0755 $(1)/bin + $(INSTALL) -d -m 0755 $(1)/sbin + $(INSTALL) -d -m 0755 $(1)/lib +endef +endif + define SKELETON_INSTALL_TARGET_CMDS rsync -a --ignore-times $(SYNC_VCS_EXCLUSIONS) \ --chmod=u=rwX,go=rX --exclude .empty --exclude '*~' \ $(SKELETON_PATH)/ $(TARGET_DIR)/ - $(SKELETON_USR_SYMLINKS_OR_DIRS) + $(call SKELETON_USR_SYMLINKS_OR_DIRS,$(TARGET_DIR)) ln -snf lib $(TARGET_DIR)/$(LIB_SYMLINK) ln -snf lib $(TARGET_DIR)/usr/$(LIB_SYMLINK) $(INSTALL) -m 0644 support/misc/target-dir-warning.txt \
Signature · 6 lines
Arnout Vandecappelle arnout at mind be Senior Embedded Software Architect +32-16-286500 Essensium/Mind http://www.mind.be G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle GPG fingerprint: 7493 020B C7E3 8618 8DEC 222C 82EB F404 F9AC 0DDF
PATCH 1/2 package/skeleton: parametrise the symlinks-or-mkdir macro
Arnout, All,
On 2015-11-27 22:58 +0100, Arnout Vandecappelle spake thusly:
Quoted 53 lines · Yann E. MORIN
Quoted 13 lines
currently, we only make the merged symlinks or non-merged mkdirs in the target directory. This is fine, as long as one does not run gdb.
However, as soon as one wants to run gdb (or gdbserver) on the target, gdb will only search for libraries in /lib in the sysroot.
In preparation for a patch to fix that, make the symlink-or-mkdir macro a function that takes as parameter the base directory where to create symlinks or mkdir in.
Move the function declarations our of the custom/non-custom skeleton conditional block, so they are always available.
Quoted 6 lines
Reported-by Pieterjan Camerlynck <[email protected]>Signed-off-by "Yann E. MORIN" <[email protected]>Cc Pieterjan Camerlynck <[email protected]>Cc Maxime Hadjinlian <[email protected]>Cc Peter Korsgaard <[email protected]>Cc Thomas Petazzoni <[email protected]>But...
Quoted 28 lines
--- package/skeleton/skeleton.mk | 31 ++++++++++++++++--------------- 1 file changed, 16 insertions(+), 15 deletions(-)package/skeleton/skeleton.mk +0
-14@@ -57,27 +57,28 @@ else # ! custom skeleton SKELETON_PATH = system/skeleton -ifeq ($(BR2_ROOTFS_MERGED_USR),y) -define SKELETON_USR_SYMLINKS_OR_DIRS - ln -snf usr/bin $(TARGET_DIR)/bin - ln -snf usr/sbin $(TARGET_DIR)/sbin - ln -snf usr/lib $(TARGET_DIR)/lib -endef -else -define SKELETON_USR_SYMLINKS_OR_DIRS - $(INSTALL) -d -m 0755 $(TARGET_DIR)/bin - $(INSTALL) -d -m 0755 $(TARGET_DIR)/sbin - $(INSTALL) -d -m 0755 $(TARGET_DIR)/lib -endef -endif - endif # ! custom skeleton
Quoted 6 lines
package/skeleton/skeleton.mk else # ! custom skeleton · line 64
Quoted 3 lines
package/skeleton/skeleton.mk +3
-0+# This function handles the merged or non-merged /usr cases +ifeq ($(BR2_ROOTFS_MERGED_USR),y) +define SKELETON_USR_SYMLINKS_OR_DIRSWe usually make functions lowercase rather than uppercase, although there are
notable exceptions like MESSAGE and UPPERCASE.
Well, one may argue that hooks are functions like any other, and we write them in upper-case.
So yes, we usually write lower-case functions in the infras. But (almost?) everything in packages is upper-case, so I think it is best to not get diverge too much to what we do in other packages.
Regards,
Yann E. MORIN.
Signature · 6 lines
.-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------'
PATCH 2/2 package/skeleton: also handle merged /usr in the staging
In reply to Yann E. MORINWhen the target uses a merged /usr setup, gdbserver will only report paths in /lib to the remote gdb, which in turn will only look libraries in staging/lib and never in staging/usr/lib.
So. the mreged (or non-merged) /usr setup must be replicated in the staging.
The best solution where to do so is in the skeleton package, since it is guaranteed to come before any package that installs things in the staging, and even before the (internal or external) toolchain as well.
--- Makefile | 9 ++------- package/skeleton/skeleton.mk | 18 ++++++++++++++++++ 2 files changed, 20 insertions(+), 7 deletions(-)
Makefile +2 -7
@@ -456,14 +456,9 @@ else LIB_SYMLINK = lib32 endif +# Populating the staging with the base directories in handled by the skeleton package $(STAGING_DIR): - @mkdir -p $(STAGING_DIR)/bin - @mkdir -p $(STAGING_DIR)/lib - @ln -snf lib $(STAGING_DIR)/$(LIB_SYMLINK) - @mkdir -p $(STAGING_DIR)/usr/lib - @ln -snf lib $(STAGING_DIR)/usr/$(LIB_SYMLINK) - @mkdir -p $(STAGING_DIR)/usr/include - @mkdir -p $(STAGING_DIR)/usr/bin + @mkdir -p $(STAGING_DIR) @ln -snf $(STAGING_DIR) $(BASE_DIR)/staging RSYNC_VCS_EXCLUSIONS = \
package/skeleton/skeleton.mk +18 -0
@@ -13,6 +13,9 @@ SKELETON_SOURCE = # on skeleton. SKELETON_ADD_TOOLCHAIN_DEPENDENCY = NO +# The skeleton also handles the merged /usr case in the sysroot +SKELETON_INSTALL_STAGING = YES + ifeq ($(BR2_ROOTFS_SKELETON_CUSTOM),y) SKELETON_PATH = $(call qstrip,$(BR2_ROOTFS_SKELETON_CUSTOM_PATH))
@@ -85,6 +88,21 @@ define SKELETON_INSTALL_TARGET_CMDS $(TARGET_DIR_WARNING_FILE) endef +# For the staging dir, we don't really care about /bin and /sbin. +# But for consistency with the target dir, and to simplify the code, +# we still handle them for the merged or non-merged /usr cases. +# Since the toolchain is not yet available, the staging is not yet +# populated, so we need to create the directories in /usr +define SKELETON_INSTALL_STAGING_CMDS + $(INSTALL) -d -m 0755 $(STAGING_DIR)/usr/lib + $(INSTALL) -d -m 0755 $(STAGING_DIR)/usr/bin + $(INSTALL) -d -m 0755 $(STAGING_DIR)/usr/sbin + $(INSTALL) -d -m 0755 $(STAGING_DIR)/usr/include + $(call SKELETON_USR_SYMLINKS_OR_DIRS,$(STAGING_DIR)) + ln -snf lib $(STAGING_DIR)/$(LIB_SYMLINK) + ln -snf lib $(STAGING_DIR)/usr/$(LIB_SYMLINK) +endef + SKELETON_TARGET_GENERIC_HOSTNAME = $(call qstrip,$(BR2_TARGET_GENERIC_HOSTNAME)) SKELETON_TARGET_GENERIC_ISSUE = $(call qstrip,$(BR2_TARGET_GENERIC_ISSUE)) SKELETON_TARGET_GENERIC_ROOT_PASSWD = $(call qstrip,$(BR2_TARGET_GENERIC_ROOT_PASSWD))
Signature · 1 line
1.9.1
PATCH 2/2 package/skeleton: also handle merged /usr in the staging
Quoted 11 lines · Yann E. MORIN
When the target uses a merged /usr setup, gdbserver will only report paths in /lib to the remote gdb, which in turn will only look libraries in staging/lib and never in staging/usr/lib.
So. the mreged (or non-merged) /usr setup must be replicated in the staging.
The best solution where to do so is in the skeleton package, since it is guaranteed to come before any package that installs things in the staging, and even before the (internal or external) toolchain as well.
Quoted 6 lines
Reported-by Pieterjan Camerlynck <[email protected]>Signed-off-by "Yann E. MORIN" <[email protected]>Cc Pieterjan Camerlynck <[email protected]>Cc Maxime Hadjinlian <[email protected]>Cc Peter Korsgaard <[email protected]>Cc Thomas Petazzoni <[email protected]>
However, this only applies to next - shouldn't we do this on master as well?
This will be the first time we release the merged /usr, so we should probably get it right...
Also...
Quoted 43 lines
--- Makefile | 9 ++------- package/skeleton/skeleton.mk | 18 ++++++++++++++++++ 2 files changed, 20 insertions(+), 7 deletions(-)Makefile +2
-7@@ -456,14 +456,9 @@ else LIB_SYMLINK = lib32 endif +# Populating the staging with the base directories in handled by the skeleton package $(STAGING_DIR): - @mkdir -p $(STAGING_DIR)/bin - @mkdir -p $(STAGING_DIR)/lib - @ln -snf lib $(STAGING_DIR)/$(LIB_SYMLINK) - @mkdir -p $(STAGING_DIR)/usr/lib - @ln -snf lib $(STAGING_DIR)/usr/$(LIB_SYMLINK) - @mkdir -p $(STAGING_DIR)/usr/include - @mkdir -p $(STAGING_DIR)/usr/bin + @mkdir -p $(STAGING_DIR) @ln -snf $(STAGING_DIR) $(BASE_DIR)/staging RSYNC_VCS_EXCLUSIONS = \package/skeleton/skeleton.mk +3
-0@@ -13,6 +13,9 @@ SKELETON_SOURCE = # on skeleton. SKELETON_ADD_TOOLCHAIN_DEPENDENCY = NO +# The skeleton also handles the merged /usr case in the sysroot +SKELETON_INSTALL_STAGING = YES + ifeq ($(BR2_ROOTFS_SKELETON_CUSTOM),y) SKELETON_PATH = $(call qstrip,$(BR2_ROOTFS_SKELETON_CUSTOM_PATH))@@ -85,6 +88,21 @@ define SKELETON_INSTALL_TARGET_CMDS $(TARGET_DIR_WARNING_FILE) endef
package/skeleton/skeleton.mk define SKELETON_INSTALL_TARGET_CMDS · line 99
Quoted 10 lines
package/skeleton/skeleton.mk +9
-0+# For the staging dir, we don't really care about /bin and /sbin. +# But for consistency with the target dir, and to simplify the code, +# we still handle them for the merged or non-merged /usr cases. +# Since the toolchain is not yet available, the staging is not yet +# populated, so we need to create the directories in /usr +define SKELETON_INSTALL_STAGING_CMDS + $(INSTALL) -d -m 0755 $(STAGING_DIR)/usr/lib + $(INSTALL) -d -m 0755 $(STAGING_DIR)/usr/bin + $(INSTALL) -d -m 0755 $(STAGING_DIR)/usr/sbin
Perhaps this would be a good time to move this to theSKELETON_USR_SYMLINKS_OR_DIRS macro and remove these directories from the skeleton.
Regards,
Arnout
Quoted 10 lines
package/skeleton/skeleton.mk +6
-0+ $(INSTALL) -d -m 0755 $(STAGING_DIR)/usr/include + $(call SKELETON_USR_SYMLINKS_OR_DIRS,$(STAGING_DIR)) + ln -snf lib $(STAGING_DIR)/$(LIB_SYMLINK) + ln -snf lib $(STAGING_DIR)/usr/$(LIB_SYMLINK) +endef + SKELETON_TARGET_GENERIC_HOSTNAME = $(call qstrip,$(BR2_TARGET_GENERIC_HOSTNAME)) SKELETON_TARGET_GENERIC_ISSUE = $(call qstrip,$(BR2_TARGET_GENERIC_ISSUE)) SKELETON_TARGET_GENERIC_ROOT_PASSWD = $(call qstrip,$(BR2_TARGET_GENERIC_ROOT_PASSWD))
Signature · 6 lines
Arnout Vandecappelle arnout at mind be Senior Embedded Software Architect +32-16-286500 Essensium/Mind http://www.mind.be G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle GPG fingerprint: 7493 020B C7E3 8618 8DEC 222C 82EB F404 F9AC 0DDF
PATCH 2/2 package/skeleton: also handle merged /usr in the staging
Arnout, All,
On 2015-11-27 23:34 +0100, Arnout Vandecappelle spake thusly:
Quoted 19 lines · Yann E. MORIN
Quoted 11 lines
When the target uses a merged /usr setup, gdbserver will only report paths in /lib to the remote gdb, which in turn will only look libraries in staging/lib and never in staging/usr/lib.
So. the mreged (or non-merged) /usr setup must be replicated in the staging.
The best solution where to do so is in the skeleton package, since it is guaranteed to come before any package that installs things in the staging, and even before the (internal or external) toolchain as well.
Quoted 6 lines
Reported-by Pieterjan Camerlynck <[email protected]>Signed-off-by "Yann E. MORIN" <[email protected]>Cc Pieterjan Camerlynck <[email protected]>Cc Maxime Hadjinlian <[email protected]>Cc Peter Korsgaard <[email protected]>Cc Thomas Petazzoni <[email protected]>
Quoted 5 lines
However, this only applies to next - shouldn't we do this on master as well?
This will be the first time we release the merged /usr, so we should probably get it right...
Hmmm... Surely this patch was done against master, not next. Or did I foobared my tree?... ;-)
Yes, I'd like we get that in master, but I'd like some testing first (of course, I did my homework, but a note from the reporter would have been great, too).
Quoted 2 lines
Perhaps this would be a good time to move this to the
SKELETON_USR_SYMLINKS_OR_DIRSmacro and remove these directories from the skeleton.
*That* would be for next. Or after the release, since it's so close...
Thanks! :-)
Regards,
Yann E. MORIN.
Signature · 6 lines
.-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------'
PATCH 2/2 package/skeleton: also handle merged /usr in the staging
Yann,
Sorry for the delay. I've tested the patch and everything seems ok to me.
Thanks!
Pieterjan
2015-11-27 23:48 GMT+01:00 Yann E. MORIN <[email protected]>:
Quoted 52 lines
Arnout, All,
On 2015-11-27 23:34 +0100, Arnout Vandecappelle spake thusly:
Quoted 19 lines · Yann E. MORIN
Quoted 11 lines
When the target uses a merged /usr setup, gdbserver will only report paths in /lib to the remote gdb, which in turn will only look libraries in staging/lib and never in staging/usr/lib.
So. the mreged (or non-merged) /usr setup must be replicated in the staging.
The best solution where to do so is in the skeleton package, since it is guaranteed to come before any package that installs things in the staging, and even before the (internal or external) toolchain as well.
Quoted 6 lines
Reported-by Pieterjan Camerlynck <[email protected]>Signed-off-by "Yann E. MORIN" <[email protected]>Cc Pieterjan Camerlynck <[email protected]>Cc Maxime Hadjinlian <[email protected]>Cc Peter Korsgaard <[email protected]>Cc Thomas Petazzoni <[email protected]>Quoted 5 lines
However, this only applies to next - shouldn't we do this on master as well?
This will be the first time we release the merged /usr, so we should probably get it right...Hmmm... Surely this patch was done against master, not next. Or did I foobared my tree?... ;-)
Yes, I'd like we get that in master, but I'd like some testing first (of course, I did my homework, but a note from the reporter would have been great, too).
Quoted 2 lines
Perhaps this would be a good time to move this to the
SKELETON_USR_SYMLINKS_OR_DIRSmacro and remove these directories from the skeleton.*That* would be for next. Or after the release, since it's so close...
Thanks! :-)
Regards,
Yann E. MORIN.--
.-----------------.--------------------.------------------.--------------------.| Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. |'------------------------------^-------^------------------^--------------------'
cover core: use merged /usr in staging (branch merged-usr-staging)
In reply to Yann E. MORINQuoted 7 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Yann" == Yann E MORIN <[email protected]> writes:
Hello All!
As reported by Pieterjan, when doing remote debugging with gdbserver on a merged /usr setup, the remote gdb would only look for libraries in staging/lib and never in staging/usr/lib.
Quoted 6 lines
This series replicates in staging the same merged /usr handling as we have for target/.
This is implemented in the skeleton package, as it is the only easy place that is guaranteed to be before all other packages *and* before the toolchains.
Committed series, thanks.
Signature · 1 line
Bye, Peter Korsgaard