ppc4xx: Remove remnants from ocotea, taishan, ebony and taihu
PATCH 1/1 ppc4xx: Remove remnants from ocotea, taishan, ebony and taihu
The removal of some PPC4xx boards did not catch all references to these boards. This patch now removes all remnants still left.
Signed-off-by Stefan Roese <[email protected]>
Cc Stefan Roese <[email protected]>
--- arch/powerpc/cpu/ppc4xx/Kconfig | 16 ---------------- arch/powerpc/cpu/ppc4xx/start.S | 23 ----------------------- 2 files changed, 39 deletions(-)
arch/powerpc/cpu/ppc4xx/Kconfig +0 -16
@@ -28,9 +28,6 @@ config TARGET_CANYONLANDS select DM select DM_SERIAL -config TARGET_EBONY - bool "Support ebony" - config TARGET_KATMAI bool "Support katmai"
@@ -43,21 +40,12 @@ config TARGET_LUAN config TARGET_MAKALU bool "Support makalu" -config TARGET_OCOTEA - bool "Support ocotea" - config TARGET_REDWOOD bool "Support redwood" config TARGET_SEQUOIA bool "Support sequoia" -config TARGET_TAIHU - bool "Support taihu" - -config TARGET_TAISHAN - bool "Support taishan" - config TARGET_WALNUT bool "Support walnut"
@@ -142,16 +130,12 @@ source "board/amcc/acadia/Kconfig" source "board/amcc/bamboo/Kconfig" source "board/amcc/bubinga/Kconfig" source "board/amcc/canyonlands/Kconfig" -source "board/amcc/ebony/Kconfig" source "board/amcc/katmai/Kconfig" source "board/amcc/kilauea/Kconfig" source "board/amcc/luan/Kconfig" source "board/amcc/makalu/Kconfig" -source "board/amcc/ocotea/Kconfig" source "board/amcc/redwood/Kconfig" source "board/amcc/sequoia/Kconfig" -source "board/amcc/taihu/Kconfig" -source "board/amcc/taishan/Kconfig" source "board/amcc/walnut/Kconfig" source "board/amcc/yosemite/Kconfig" source "board/amcc/yucca/Kconfig"
arch/powerpc/cpu/ppc4xx/start.S +0 -23
@@ -1795,34 +1795,11 @@ ppc405ep_init: ..no_pllset: #endif /* CONFIG_BUBINGA */ -#ifdef CONFIG_TAIHU - mfdcr r4, CPC0_BOOT - andi. r5, r4, CPC0_BOOT_SEP at l - bne strap_1 /* serial eeprom present */ - addis r5,0,CPLD_REG0_ADDR at h - ori r5,r5,CPLD_REG0_ADDR at l - andi. r5, r5, 0x10 - bne _pci_66mhz -#endif /* CONFIG_TAIHU */ - addis r3,0,PLLMR0_DEFAULT at h /* PLLMR0 default value */ ori r3,r3,PLLMR0_DEFAULT at l /* */ addis r4,0,PLLMR1_DEFAULT at h /* PLLMR1 default value */ ori r4,r4,PLLMR1_DEFAULT at l /* */ -#ifdef CONFIG_TAIHU - b 1f -_pci_66mhz: - addis r3,0,PLLMR0_DEFAULT_PCI66 at h - ori r3,r3,PLLMR0_DEFAULT_PCI66 at l - addis r4,0,PLLMR1_DEFAULT_PCI66 at h - ori r4,r4,PLLMR1_DEFAULT_PCI66 at l - b 1f -strap_1: - mfdcr r3, CPC0_PLLMR0 - mfdcr r4, CPC0_PLLMR1 -#endif /* CONFIG_TAIHU */ - 1: b pll_write /* Write the CPC0_PLLMR with new value */
Signature · 1 line
2.6.2
PATCH 1/1 ppc4xx: Remove remnants from ocotea, taishan, ebony and taihu
Quoted 5 lines · Stefan Roese
The removal of some PPC4xx boards did not catch all references to these boards. This patch now removes all remnants still left.
Signed-off-by Stefan Roese <[email protected]>Cc Stefan Roese <[email protected]>
Applied to u-boot-ppc4xx/master.
Thanks,
Stefan