Skip to contentSkip to conversation

arm64: dts: qcom: Add apq8096 dragonboard dts skeletons

PATCH In review Rajendra Nayak 2 participants 3 messages Dec 1, 2015 – Dec 2, 2015

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 arm64: dts: qcom: Add apq8096 dragonboard dts skeletons

Add new dtsi and dts files for the apq8096 dragonboards with just a serial device used as debug console

While at it, also rearrange the Makefile so we have one dtb per line so as to be consistent with whats done on other platforms.

---
 arch/arm64/boot/dts/qcom/Makefile                 |  4 ++-
 arch/arm64/boot/dts/qcom/apq8096-dragonboard.dts  | 21 ++++++++++++++++
 arch/arm64/boot/dts/qcom/apq8096-dragonboard.dtsi | 30 +++++++++++++++++++++++
 3 files changed, 54 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm64/boot/dts/qcom/apq8096-dragonboard.dts
 create mode 100644 arch/arm64/boot/dts/qcom/apq8096-dragonboard.dtsi
arch/arm64/boot/dts/qcom/Makefile +3 -1
index fa1f661..0fd9a17 100644
@@ -1,5 +1,7 @@
-dtb-$(CONFIG_ARCH_QCOM)	+= apq8016-sbc.dtb msm8916-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= apq8016-sbc.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-mtp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8996-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= apq8096-dragonboard.dtb
 
 always		:= $(dtb-y)
 subdir-y	:= $(dts-dirs)
arch/arm64/boot/dts/qcom/apq8096-dragonboard.dts new file +21 -0
new file mode 100644
index 0000000..65f4a6a
@@ -0,0 +1,21 @@
+/*
+ * Copyright (c) 2014-2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+
+#include "apq8096-dragonboard.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. APQ 8096 DragonBoard";
+	compatible = "qcom,apq8096-dragonboard";
+};
arch/arm64/boot/dts/qcom/apq8096-dragonboard.dtsi new file +30 -0
new file mode 100644
index 0000000..9bab5c0
@@ -0,0 +1,30 @@
+/*
+ * Copyright (c) 2014-2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "msm8996.dtsi"
+
+/ {
+	aliases {
+		serial0 = &blsp2_uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	soc {
+		serial at 75b0000 {
+			status = "okay";
+		};
+	};
+};
Signature · 2 lines
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
#1 lore raw
Quoted 6 lines · Rajendra Nayak

Add new dtsi and dts files for the apq8096 dragonboards with just a serial device used as debug console

While at it, also rearrange the Makefile so we have one dtb per line so as to be consistent with whats done on other platforms.

Quoted 8 lines
---
 arch/arm64/boot/dts/qcom/Makefile                 |  4 ++-
 arch/arm64/boot/dts/qcom/apq8096-dragonboard.dts  | 21 ++++++++++++++++
 arch/arm64/boot/dts/qcom/apq8096-dragonboard.dtsi | 30 +++++++++++++++++++++++
 3 files changed, 54 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm64/boot/dts/qcom/apq8096-dragonboard.dts
 create mode 100644 arch/arm64/boot/dts/qcom/apq8096-dragonboard.dtsi

One problem. The board you have is not called a dragonboard. Let's check with the marketing folks on what they're calling it now. We need to explicitly avoid using dragonboard here as that name applies to a different class of products. Thanks.

- Bryan

Signature · 3 lines
Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a
Linux Foundation Collaborative Project
#2 lore raw
Quoted 16 lines · Bryan Huntsman
Quoted 6 lines · Rajendra Nayak

Add new dtsi and dts files for the apq8096 dragonboards with just a serial device used as debug console

While at it, also rearrange the Makefile so we have one dtb per line so as to be consistent with whats done on other platforms.

Quoted 8 lines
---
 arch/arm64/boot/dts/qcom/Makefile                 |  4 ++-
 arch/arm64/boot/dts/qcom/apq8096-dragonboard.dts  | 21 ++++++++++++++++
 arch/arm64/boot/dts/qcom/apq8096-dragonboard.dtsi | 30 +++++++++++++++++++++++
 3 files changed, 54 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm64/boot/dts/qcom/apq8096-dragonboard.dts
 create mode 100644 arch/arm64/boot/dts/qcom/apq8096-dragonboard.dtsi
Quoted 4 lines

One problem. The board you have is not called a dragonboard. Let's check with the marketing folks on what they're calling it now. We need to explicitly avoid using dragonboard here as that name applies to a different class of products. Thanks.

Thanks Bryan, I'll update with the new board name.

Signature · 2 lines
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
hosted by The Linux Foundation