tegra: Remove merge markers in some Kconfig files
Subsystems (3)
PATCH 1/4 tegra: Remove merge markers in some Kconfig files
These were added by mistake in commit fde7e189. They cause a warning when configuring the boards. Remove them.
---
configs/beaver_defconfig | 3 --- configs/cardhu_defconfig | 3 --- configs/jetson-tk1_defconfig | 3 --- configs/trimslice_defconfig | 3 --- 4 files changed, 12 deletions(-)
configs/beaver_defconfig +0 -3
@@ -13,11 +13,8 @@ CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set CONFIG_SPI_FLASH=y -<<<<<<< HEAD CONFIG_SPI_FLASH_WINBOND=y -======= CONFIG_PCI_TEGRA=y ->>>>>>> dm: tegra: pci: Move CONFIG_PCI_TEGRA to Kconfig CONFIG_SYS_NS16550=y CONFIG_TEGRA20_SLINK=y CONFIG_USB=y
configs/cardhu_defconfig +0 -3
@@ -13,11 +13,8 @@ CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set CONFIG_SPI_FLASH=y -<<<<<<< HEAD CONFIG_SPI_FLASH_WINBOND=y -======= CONFIG_PCI_TEGRA=y ->>>>>>> dm: tegra: pci: Move CONFIG_PCI_TEGRA to Kconfig CONFIG_SYS_NS16550=y CONFIG_TEGRA20_SLINK=y CONFIG_USB=y
configs/jetson-tk1_defconfig +0 -3
@@ -13,11 +13,8 @@ CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set CONFIG_SPI_FLASH=y -<<<<<<< HEAD CONFIG_SPI_FLASH_WINBOND=y -======= CONFIG_PCI_TEGRA=y ->>>>>>> dm: tegra: pci: Move CONFIG_PCI_TEGRA to Kconfig CONFIG_SYS_NS16550=y CONFIG_TEGRA114_SPI=y CONFIG_USB=y
configs/trimslice_defconfig +0 -3
@@ -13,11 +13,8 @@ CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set CONFIG_SPI_FLASH=y -<<<<<<< HEAD CONFIG_SPI_FLASH_WINBOND=y -======= CONFIG_PCI_TEGRA=y ->>>>>>> dm: tegra: pci: Move CONFIG_PCI_TEGRA to Kconfig CONFIG_SYS_NS16550=y CONFIG_TEGRA20_SFLASH=y CONFIG_USB=y
Signature · 1 line
2.6.0.rc2.230.g3dd15c0
PATCH 2/4 dm: serial: ns16550: Add pre-reloc flag to the driver
For platforms that don't use device tree in SPL the only way to mark this driver as 'required by relocation' is with the DM_FLAG_PRE_RELOC flag. Add this to ensure that the driver is bound.
---
drivers/serial/ns16550.c | 1 + 1 file changed, 1 insertion(+)
drivers/serial/ns16550.c +1 -0
@@ -451,5 +451,6 @@ U_BOOT_DRIVER(ns16550_serial) = { .priv_auto_alloc_size = sizeof(struct NS16550), .probe = ns16550_serial_probe, .ops = &ns16550_serial_ops, + .flags = DM_FLAG_PRE_RELOC, };#endif /* CONFIG_DM_SERIAL */
Signature · 1 line
2.6.0.rc2.230.g3dd15c0
PATCH 2/4 dm: serial: ns16550: Add pre-reloc flag to the driver
Quoted 11 lines · Simon Glass
For platforms that don't use device tree in SPL the only way to mark this driver as 'required by relocation' is with the
DM_FLAG_PRE_RELOCflag. Add this to ensure that the driver is bound.Signed-off-by Simon Glass <[email protected]>Reported-by Stephen Warren <[email protected]>---
drivers/serial/ns16550.c | 1 + 1 file changed, 1 insertion(+)
PATCH 2/4 dm: serial: ns16550: Add pre-reloc flag to the driver
In reply to Simon GlassQuoted 8 lines · Simon Glass
For platforms that don't use device tree in SPL the only way to mark this driver as 'required by relocation' is with the
DM_FLAG_PRE_RELOCflag. Add this to ensure that the driver is bound.Fixes fde7e18938d8 ("dm: tegra: pci: Move CONFIG_PCI_TEGRA to Kconfig")Signed-off-by Simon Glass <[email protected]>Reported-by Stephen Warren <[email protected]>Acked-by Thomas Chou <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20151206/4a495896/attachment.sig>
PATCH 3/4 dm: tegra: Provide serial platform data for SPL
In reply to Simon GlassAt present an incorrect #if term is preventing this data from being compiled in. All tegra boards use driver model for serial, so we can just drop this.
---
arch/arm/mach-tegra/board.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/mach-tegra/board.c +1 -1
@@ -214,7 +214,7 @@ void board_init_uart_f(void)setup_uarts (uart_ids); } -#if CONFIG_IS_ENABLED (DM_SERIAL ) && !CONFIG_IS_ENABLED (OF_CONTROL ) +#if !CONFIG_IS_ENABLED (OF_CONTROL )static struct ns16550_platdata ns16550_com1_pdata = { .base =CONFIG_SYS_NS16550_COM1 , .reg_shift = 2,
Signature · 1 line
2.6.0.rc2.230.g3dd15c0
PATCH 3/4 dm: tegra: Provide serial platform data for SPL
Quoted 10 lines · Simon Glass
At present an incorrect #if term is preventing this data from being compiled in. All tegra boards use driver model for serial, so we can just drop this.
Signed-off-by Simon Glass <[email protected]>Reported-by Stephen Warren <[email protected]>---
arch/arm/mach-tegra/board.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
PATCH 3/4 dm: tegra: Provide serial platform data for SPL
In reply to Simon GlassQuoted 7 lines · Simon Glass
At present an incorrect #if term is preventing this data from being compiled in. All tegra boards use driver model for serial, so we can just drop this.
Fixes fde7e18938d8 ("dm: tegra: pci: Move CONFIG_PCI_TEGRA to Kconfig")Signed-off-by Simon Glass <[email protected]>Reported-by Stephen Warren <[email protected]>Acked-by Thomas Chou <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20151206/190c90ad/attachment.sig>
PATCH 4/4 dm: omap: Fix serial UART on beaglebone black
In reply to Simon GlassThis is currently broken since it does not have the reg-shift property for the UART in the device tree. Fix it.
---
arch/arm/dts/am33xx.dtsi | 6 ++++++ 1 file changed, 6 insertions(+)
arch/arm/dts/am33xx.dtsi +6 -0
@@ -214,6 +214,7 @@ ti,hwmods = "uart1"; clock-frequency = <48000000>; reg = <0x44e09000 0x2000>; + reg-shift = <2>; interrupts = <72>; status = "disabled"; dmas = <&edma 26>, <&edma 27>;
@@ -225,6 +226,7 @@ ti,hwmods = "uart2"; clock-frequency = <48000000>; reg = <0x48022000 0x2000>; + reg-shift = <2>; interrupts = <73>; status = "disabled"; dmas = <&edma 28>, <&edma 29>;
@@ -236,6 +238,7 @@ ti,hwmods = "uart3"; clock-frequency = <48000000>; reg = <0x48024000 0x2000>; + reg-shift = <2>; interrupts = <74>; status = "disabled"; dmas = <&edma 30>, <&edma 31>;
@@ -247,6 +250,7 @@ ti,hwmods = "uart4"; clock-frequency = <48000000>; reg = <0x481a6000 0x2000>; + reg-shift = <2>; interrupts = <44>; status = "disabled"; };
@@ -256,6 +260,7 @@ ti,hwmods = "uart5"; clock-frequency = <48000000>; reg = <0x481a8000 0x2000>; + reg-shift = <2>; interrupts = <45>; status = "disabled"; };
@@ -265,6 +270,7 @@ ti,hwmods = "uart6"; clock-frequency = <48000000>; reg = <0x481aa000 0x2000>; + reg-shift = <2>; interrupts = <46>; status = "disabled"; };
Signature · 1 line
2.6.0.rc2.230.g3dd15c0
PATCH 4/4 dm: omap: Fix serial UART on beaglebone black
Quoted 10 lines · Simon Glass
This is currently broken since it does not have the reg-shift property for the UART in the device tree. Fix it.
Reported-by Yegor Yefremov <[email protected]>Signed-off-by Simon Glass <[email protected]>---
arch/arm/dts/am33xx.dtsi | 6 ++++++ 1 file changed, 6 insertions(+)
PATCH 4/4 dm: omap: Fix serial UART on beaglebone black
In reply to Simon GlassQuoted 5 lines · Simon Glass
This is currently broken since it does not have the reg-shift property for the UART in the device tree. Fix it.
Reported-by Yegor Yefremov <[email protected]>Signed-off-by Simon Glass <[email protected]>
OK, this isn't enough. Both this patch, and Mugunthan's more comprehensive one (That gets all TI targets) fails on the non-OF_CONTROL case.
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20151206/594a54dd/attachment.sig>
PATCH 4/4 dm: omap: Fix serial UART on beaglebone black
Hi Tom,
Quoted 6 lines · Tom Rini
Quoted 3 lines · Simon Glass
This is currently broken since it does not have the reg-shift property for the UART in the device tree. Fix it.
Quoted 6 lines
Quoted 2 lines
Reported-by Yegor Yefremov <[email protected]>Signed-off-by Simon Glass <[email protected]>OK, this isn't enough. Both this patch, and Mugunthan's more comprehensive one (That gets all TI targets) fails on the non-OF_CONTROL case.
Yes I see. I meant to test that case as well but ran out of time. I'll update the series.
Regards,
Simon
PATCH 1/4 tegra: Remove merge markers in some Kconfig files
In reply to Simon GlassQuoted 2 lines · Simon Glass
These were added by mistake in commit
fde7e189. They cause a warning when configuring the boards. Remove them.
Patches 1-3,
It would be useful to include the appropriate Fixes: tags in the commit message, and this issue was originally:
PATCH 1/4 tegra: Remove merge markers in some Kconfig files
Hi Stephen,
Quoted 6 lines · Stephen Warren
Quoted 3 lines · Simon Glass
These were added by mistake in commit
fde7e189. They cause a warning when configuring the boards. Remove them.
Quoted 7 lines
Patches 1-3,
Tested-by Stephen Warren <[email protected]>It would be useful to include the appropriate Fixes: tags in the commit message, and this issue was originally:
Reported-by Kevin Hilman <[email protected]>
Thanks - what Fixes tags?
Regards,
Simon
PATCH 1/4 tegra: Remove merge markers in some Kconfig files
Quoted 12 lines · Simon Glass
Hi Stephen,
Quoted 9 lines · Stephen Warren
Quoted 3 lines · Simon Glass
These were added by mistake in commit
fde7e189. They cause a warning when configuring the boards. Remove them.Patches 1-3,
Tested-by Stephen Warren <[email protected]>
Quoted 6 lines
Quoted 4 lines
It would be useful to include the appropriate Fixes: tags in the commit message, and this issue was originally:
Reported-by Kevin Hilman <[email protected]>Thanks - what Fixes tags?
I'd expect the following at the start of the "signature paragraph":
Referencing in a standard way the commits that caused the bug that this patch fixes makes researching bug/commit history easier. Admittedly that tag is something from the Linux kernel development process and isn't mandated by U-Boot's process, but I think it's a good idea that's worth following.
PATCH 1/4 tegra: Remove merge markers in some Kconfig files
In reply to Simon GlassQuoted 5 lines · Simon Glass
These were added by mistake in commit
fde7e189. They cause a warning when configuring the boards. Remove them.Signed-off-by Simon Glass <[email protected]>Reported-by Stephen Warren <[email protected]>
Quoted 8 lines
---
configs/beaver_defconfig | 3 --- configs/cardhu_defconfig | 3 --- configs/jetson-tk1_defconfig | 3 --- configs/trimslice_defconfig | 3 --- 4 files changed, 12 deletions(-)
PATCH 1/4 tegra: Remove merge markers in some Kconfig files
In reply to Simon GlassQuoted 9 lines · Simon Glass
These were added by mistake in commit
fde7e189. They cause a warning when configuring the boards. Remove them.Fixes fde7e18938d8 ("dm: tegra: pci: Move CONFIG_PCI_TEGRA to Kconfig")Signed-off-by Simon Glass <[email protected]>Reported-by Stephen Warren <[email protected]>Tested-by Stephen Warren <[email protected]>Reported-by Kevin Hilman <[email protected]>Acked-by Thomas Chou <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20151206/3dbcf8ea/attachment.sig>