m68k, mips, powerpc, kbuild: move CONFIG_SYS_TEXT_BASE
Subsystems (4)
cover m68k, mips, powerpc, kbuild: move CONFIG_SYS_TEXT_BASE
Currently, CONFIG_SYS_TEXT_BASE is defined in various ways:
[1] by board/${VENDOR}/${BOARD}/config.mk
[2] by CONFIG_SYS_EXTRA_OPTIONS
(This was "options" field of boards.cfg before Kconfig conversion)
[3] by include/configs/${BOARD}.h
[4] by configs/${BOARD}_defconfig
Kbuild is still keeping some tricky code for [1]. We have some boards using [1] for M68K, MIPS, PowerPC.
Convert them and drop the workaround code from Kbuild.
I built all the boards and compared the checksum of the binary images for all of them.
I confirmed no impact on these moves. This series should be OK.
Masahiro Yamada (8):
m68k: move CONFIG_SYS_TEXT_BASE to defconfig files
m68k: M54418TWR: drop board/freescale/m54418twr/config.mk
microblaze: move CONFIG_SYS_TEXT_BASE to defconfig
mips: vct: move CONFIG_SYS_TEXT_BASE away from config.mk
mips: dbau1x00: move CONFIG_SYS_TEXT_BASE away from config.mk
mips: pb1x00: move CONFIG_SYS_TEXT_BASE away from config.mk
powerpc: yucca: drop redundant CONFIG_SYS_TEXT_BASE from config.mk
kbuild: drop workaround for old style CONFIG_SYS_TEXT_BASE defines
Kconfig | 3 ++- Makefile | 6 ------ arch/m68k/cpu/mcf5445x/start.S | 8 ++++---- board/amcc/yucca/config.mk | 6 ------ board/cobra5272/config.mk | 9 --------- board/dbau1x00/config.mk | 16 ---------------- board/freescale/m5208evbe/config.mk | 9 --------- board/freescale/m5249evb/config.mk | 9 --------- board/freescale/m5253demo/config.mk | 9 --------- board/freescale/m5253evbe/config.mk | 9 --------- board/freescale/m5272c3/config.mk | 9 --------- board/freescale/m5275evb/config.mk | 9 --------- board/freescale/m5282evb/config.mk | 9 --------- board/freescale/m53017evb/config.mk | 9 --------- board/freescale/m5329evb/config.mk | 9 --------- board/freescale/m5373evb/config.mk | 9 --------- board/freescale/m54418twr/config.mk | 7 ------- board/freescale/m547xevb/config.mk | 9 --------- board/freescale/m548xevb/config.mk | 9 --------- board/micronas/vct/config.mk | 13 ------------- board/pb1x00/config.mk | 16 ---------------- board/sysam/amcore/config.mk | 7 ------- board/xilinx/microblaze-generic/config.mk | 2 -- configs/M5208EVBE_defconfig | 1 + configs/M52277EVB_defconfig | 3 ++- configs/M52277EVB_stmicro_defconfig | 3 ++- configs/M5235EVB_Flash32_defconfig | 3 ++- configs/M5235EVB_defconfig | 2 +- configs/M5249EVB_defconfig | 1 + configs/M5253DEMO_defconfig | 1 + configs/M5253EVBE_defconfig | 1 + configs/M5272C3_defconfig | 1 + configs/M5275EVB_defconfig | 1 + configs/M5282EVB_defconfig | 1 + configs/M53017EVB_defconfig | 1 + configs/M5329AFEE_defconfig | 1 + configs/M5329BFEE_defconfig | 1 + configs/M5373EVB_defconfig | 1 + configs/M54418TWR_defconfig | 3 ++- configs/M54418TWR_nand_mii_defconfig | 3 ++- configs/M54418TWR_nand_rmii_defconfig | 3 ++- configs/M54418TWR_nand_rmii_lowfreq_defconfig | 3 ++- configs/M54418TWR_serial_mii_defconfig | 3 ++- configs/M54418TWR_serial_rmii_defconfig | 3 ++- configs/M54451EVB_defconfig | 3 ++- configs/M54451EVB_stmicro_defconfig | 3 ++- configs/M54455EVB_a66_defconfig | 3 ++- configs/M54455EVB_defconfig | 3 ++- configs/M54455EVB_i66_defconfig | 3 ++- configs/M54455EVB_intel_defconfig | 3 ++- configs/M54455EVB_stm33_defconfig | 3 ++- configs/M5475AFE_defconfig | 1 + configs/M5475BFE_defconfig | 1 + configs/M5475CFE_defconfig | 1 + configs/M5475DFE_defconfig | 1 + configs/M5475EFE_defconfig | 1 + configs/M5475FFE_defconfig | 1 + configs/M5475GFE_defconfig | 1 + configs/M5485AFE_defconfig | 1 + configs/M5485BFE_defconfig | 1 + configs/M5485CFE_defconfig | 1 + configs/M5485DFE_defconfig | 1 + configs/M5485EFE_defconfig | 1 + configs/M5485FFE_defconfig | 1 + configs/M5485GFE_defconfig | 1 + configs/M5485HFE_defconfig | 1 + configs/amcore_defconfig | 1 + configs/cobra5272_defconfig | 1 + configs/eb_cpu5282_defconfig | 3 ++- configs/eb_cpu5282_internal_defconfig | 3 ++- configs/microblaze-generic_defconfig | 1 + include/configs/M54418TWR.h | 2 +- include/configs/dbau1x00.h | 5 +++++ include/configs/pb1x00.h | 5 +++++ include/configs/vct.h | 1 + 75 files changed, 84 insertions(+), 215 deletions(-) delete mode 100644 board/cobra5272/config.mk delete mode 100644 board/dbau1x00/config.mk delete mode 100644 board/freescale/m5208evbe/config.mk delete mode 100644 board/freescale/m5249evb/config.mk delete mode 100644 board/freescale/m5253demo/config.mk delete mode 100644 board/freescale/m5253evbe/config.mk delete mode 100644 board/freescale/m5272c3/config.mk delete mode 100644 board/freescale/m5275evb/config.mk delete mode 100644 board/freescale/m5282evb/config.mk delete mode 100644 board/freescale/m53017evb/config.mk delete mode 100644 board/freescale/m5329evb/config.mk delete mode 100644 board/freescale/m5373evb/config.mk delete mode 100644 board/freescale/m54418twr/config.mk delete mode 100644 board/freescale/m547xevb/config.mk delete mode 100644 board/freescale/m548xevb/config.mk delete mode 100644 board/micronas/vct/config.mk delete mode 100644 board/pb1x00/config.mk delete mode 100644 board/sysam/amcore/config.mk
Signature · 1 line
1.9.1
PATCH 1/8 m68k: move CONFIG_SYS_TEXT_BASE to defconfig files
For historical reason, CONFIG_SYS_TEXT_BASE has been specified in various ways:
[1] by board/${VENDOR}/${BOARD}/config.mk
[2] by CONFIG_SYS_EXTRA_OPTIONS
(This was "options" field of boards.cfg before Kconfig conversion)
[3] by include/configs/${BOARD}.h
[4] by configs/${BOARD}_defconfig
Most of M68K boards use either [1] or [2], both of which we want to deprecate. Switch them into [4], which is the newest way (Kconfig).
We still allow [3] too, because it is still used by many boards and we expect much time for conversion.
Signed-off-by Masahiro Yamada <[email protected]>
---
Kconfig | 3 ++- board/cobra5272/config.mk | 9 --------- board/freescale/m5208evbe/config.mk | 9 --------- board/freescale/m5249evb/config.mk | 9 --------- board/freescale/m5253demo/config.mk | 9 --------- board/freescale/m5253evbe/config.mk | 9 --------- board/freescale/m5272c3/config.mk | 9 --------- board/freescale/m5275evb/config.mk | 9 --------- board/freescale/m5282evb/config.mk | 9 --------- board/freescale/m53017evb/config.mk | 9 --------- board/freescale/m5329evb/config.mk | 9 --------- board/freescale/m5373evb/config.mk | 9 --------- board/freescale/m547xevb/config.mk | 9 --------- board/freescale/m548xevb/config.mk | 9 --------- board/sysam/amcore/config.mk | 7 ------- configs/M5208EVBE_defconfig | 1 + configs/M52277EVB_defconfig | 3 ++- configs/M52277EVB_stmicro_defconfig | 3 ++- configs/M5235EVB_Flash32_defconfig | 3 ++- configs/M5235EVB_defconfig | 2 +- configs/M5249EVB_defconfig | 1 + configs/M5253DEMO_defconfig | 1 + configs/M5253EVBE_defconfig | 1 + configs/M5272C3_defconfig | 1 + configs/M5275EVB_defconfig | 1 + configs/M5282EVB_defconfig | 1 + configs/M53017EVB_defconfig | 1 + configs/M5329AFEE_defconfig | 1 + configs/M5329BFEE_defconfig | 1 + configs/M5373EVB_defconfig | 1 + configs/M54418TWR_defconfig | 3 ++- configs/M54418TWR_nand_mii_defconfig | 3 ++- configs/M54418TWR_nand_rmii_defconfig | 3 ++- configs/M54418TWR_nand_rmii_lowfreq_defconfig | 3 ++- configs/M54418TWR_serial_mii_defconfig | 3 ++- configs/M54418TWR_serial_rmii_defconfig | 3 ++- configs/M54451EVB_defconfig | 3 ++- configs/M54451EVB_stmicro_defconfig | 3 ++- configs/M54455EVB_a66_defconfig | 3 ++- configs/M54455EVB_defconfig | 3 ++- configs/M54455EVB_i66_defconfig | 3 ++- configs/M54455EVB_intel_defconfig | 3 ++- configs/M54455EVB_stm33_defconfig | 3 ++- configs/M5475AFE_defconfig | 1 + configs/M5475BFE_defconfig | 1 + configs/M5475CFE_defconfig | 1 + configs/M5475DFE_defconfig | 1 + configs/M5475EFE_defconfig | 1 + configs/M5475FFE_defconfig | 1 + configs/M5475GFE_defconfig | 1 + configs/M5485AFE_defconfig | 1 + configs/M5485BFE_defconfig | 1 + configs/M5485CFE_defconfig | 1 + configs/M5485DFE_defconfig | 1 + configs/M5485EFE_defconfig | 1 + configs/M5485FFE_defconfig | 1 + configs/M5485GFE_defconfig | 1 + configs/M5485HFE_defconfig | 1 + configs/amcore_defconfig | 1 + configs/cobra5272_defconfig | 1 + configs/eb_cpu5282_defconfig | 3 ++- configs/eb_cpu5282_internal_defconfig | 3 ++- 62 files changed, 67 insertions(+), 144 deletions(-) delete mode 100644 board/cobra5272/config.mk delete mode 100644 board/freescale/m5208evbe/config.mk delete mode 100644 board/freescale/m5249evb/config.mk delete mode 100644 board/freescale/m5253demo/config.mk delete mode 100644 board/freescale/m5253evbe/config.mk delete mode 100644 board/freescale/m5272c3/config.mk delete mode 100644 board/freescale/m5275evb/config.mk delete mode 100644 board/freescale/m5282evb/config.mk delete mode 100644 board/freescale/m53017evb/config.mk delete mode 100644 board/freescale/m5329evb/config.mk delete mode 100644 board/freescale/m5373evb/config.mk delete mode 100644 board/freescale/m547xevb/config.mk delete mode 100644 board/freescale/m548xevb/config.mk delete mode 100644 board/sysam/amcore/config.mk
Kconfig +2 -1
@@ -208,7 +208,8 @@ config SYS_EXTRA_OPTIONS new boards should not use this option. config SYS_TEXT_BASE - depends on SPARC || ARC || X86 || ARCH_UNIPHIER || ARCH_ZYNQMP + depends on SPARC || ARC || X86 || ARCH_UNIPHIER || ARCH_ZYNQMP || \ + (M68K && !TARGET_ASTRO_MCF5373L) depends on !EFI_APP hex "Text Base" help
board/cobra5272/config.mk deleted +0 -9
@@ -1,9 +0,0 @@ -# -# (C) Copyright 2000-2003 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# Coldfire contribution by Bernhard Kuhn <[email protected]> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -CONFIG_SYS_TEXT_BASE = 0xffe00000
board/freescale/m5208evbe/config.mk deleted +0 -9
@@ -1,9 +0,0 @@ -# -# (C) Copyright 2000-2003 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# Coldfire contribution by Bernhard Kuhn <[email protected]> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -CONFIG_SYS_TEXT_BASE = 0
board/freescale/m5249evb/config.mk deleted +0 -9
@@ -1,9 +0,0 @@ -# -# (C) Copyright 2000-2003 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# Coldfire contribution by Bernhard Kuhn <[email protected]> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -CONFIG_SYS_TEXT_BASE = 0xffe00000
board/freescale/m5253demo/config.mk deleted +0 -9
@@ -1,9 +0,0 @@ -# -# (C) Copyright 2000-2003 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# Coldfire contribution by Bernhard Kuhn <[email protected]> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -CONFIG_SYS_TEXT_BASE = 0xFF800000
board/freescale/m5253evbe/config.mk deleted +0 -9
@@ -1,9 +0,0 @@ -# -# (C) Copyright 2000-2003 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# Coldfire contribution by Bernhard Kuhn <[email protected]> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -CONFIG_SYS_TEXT_BASE = 0xffe00000
board/freescale/m5272c3/config.mk deleted +0 -9
@@ -1,9 +0,0 @@ -# -# (C) Copyright 2000-2003 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# Coldfire contribution by Bernhard Kuhn <[email protected]> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -CONFIG_SYS_TEXT_BASE = 0xffe00000
board/freescale/m5275evb/config.mk deleted +0 -9
@@ -1,9 +0,0 @@ -# -# (C) Copyright 2000-2003 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# Coldfire contribution by Bernhard Kuhn <[email protected]> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -CONFIG_SYS_TEXT_BASE = 0xffe00000
board/freescale/m5282evb/config.mk deleted +0 -9
@@ -1,9 +0,0 @@ -# -# (C) Copyright 2000-2003 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# Coldfire contribution by Bernhard Kuhn <[email protected]> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -CONFIG_SYS_TEXT_BASE = 0xFFE00000
board/freescale/m53017evb/config.mk deleted +0 -9
@@ -1,9 +0,0 @@ -# -# (C) Copyright 2000-2003 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# Coldfire contribution by Bernhard Kuhn <[email protected]> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -CONFIG_SYS_TEXT_BASE = 0
board/freescale/m5329evb/config.mk deleted +0 -9
@@ -1,9 +0,0 @@ -# -# (C) Copyright 2000-2003 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# Coldfire contribution by Bernhard Kuhn <[email protected]> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -CONFIG_SYS_TEXT_BASE = 0
board/freescale/m5373evb/config.mk deleted +0 -9
@@ -1,9 +0,0 @@ -# -# (C) Copyright 2000-2003 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# Coldfire contribution by Bernhard Kuhn <[email protected]> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -CONFIG_SYS_TEXT_BASE = 0
board/freescale/m547xevb/config.mk deleted +0 -9
@@ -1,9 +0,0 @@ -# -# (C) Copyright 2000-2003 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# Coldfire contribution by Bernhard Kuhn <[email protected]> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -CONFIG_SYS_TEXT_BASE = 0xFF800000
board/freescale/m548xevb/config.mk deleted +0 -9
@@ -1,9 +0,0 @@ -# -# (C) Copyright 2000-2003 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# Coldfire contribution by Bernhard Kuhn <[email protected]> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -CONFIG_SYS_TEXT_BASE = 0xFF800000
board/sysam/amcore/config.mk deleted +0 -7
@@ -1,7 +0,0 @@ -# -# (C) Copyright 2014 Angelo Dureghello <[email protected]> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -CONFIG_SYS_TEXT_BASE = 0xffc00000
configs/M5208EVBE_defconfig +1 -0
@@ -1,4 +1,5 @@ CONFIG_M68K=y CONFIG_TARGET_M5208EVBE=y +CONFIG_SYS_TEXT_BASE=0x00000000 CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_SETEXPR is not set
configs/M52277EVB_defconfig +2 -1
@@ -1,6 +1,7 @@ CONFIG_M68K=y CONFIG_TARGET_M52277EVB=y -CONFIG_SYS_EXTRA_OPTIONS="SYS_SPANSION_BOOT,SYS_TEXT_BASE=0x00000000" +CONFIG_SYS_TEXT_BASE=0x00000000 +CONFIG_SYS_EXTRA_OPTIONS="SYS_SPANSION_BOOT" CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NET is not set
configs/M52277EVB_stmicro_defconfig +2 -1
@@ -1,6 +1,7 @@ CONFIG_M68K=y CONFIG_TARGET_M52277EVB=y -CONFIG_SYS_EXTRA_OPTIONS="CF_SBF,SYS_STMICRO_BOOT,SYS_TEXT_BASE=0x43E00000" +CONFIG_SYS_TEXT_BASE=0x43E00000 +CONFIG_SYS_EXTRA_OPTIONS="CF_SBF,SYS_STMICRO_BOOT" # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NET is not set # CONFIG_CMD_NFS is not set
configs/M5235EVB_Flash32_defconfig +2 -1
@@ -1,6 +1,7 @@ CONFIG_M68K=y CONFIG_TARGET_M5235EVB=y -CONFIG_SYS_EXTRA_OPTIONS="NORFLASH_PS32BIT,SYS_TEXT_BASE=0xFFC00000" +CONFIG_SYS_TEXT_BASE=0xFFC00000 +CONFIG_SYS_EXTRA_OPTIONS="NORFLASH_PS32BIT" # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set # CONFIG_CMD_SETEXPR is not set
configs/M5235EVB_defconfig +1 -1
@@ -1,6 +1,6 @@ CONFIG_M68K=y CONFIG_TARGET_M5235EVB=y -CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0xFFE00000" +CONFIG_SYS_TEXT_BASE=0xFFE00000 CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set
configs/M5249EVB_defconfig +1 -0
@@ -1,4 +1,5 @@ CONFIG_M68K=y CONFIG_TARGET_M5249EVB=y +CONFIG_SYS_TEXT_BASE=0xffe00000 # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NET is not set
configs/M5253DEMO_defconfig +1 -0
@@ -1,3 +1,4 @@ CONFIG_M68K=y CONFIG_TARGET_M5253DEMO=y +CONFIG_SYS_TEXT_BASE=0xFF800000 # CONFIG_CMD_SETEXPR is not set
configs/M5253EVBE_defconfig +1 -0
@@ -1,4 +1,5 @@ CONFIG_M68K=y CONFIG_TARGET_M5253EVBE=y +CONFIG_SYS_TEXT_BASE=0xFFE00000 # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NET is not set
configs/M5272C3_defconfig +1 -0
@@ -1,5 +1,6 @@ CONFIG_M68K=y CONFIG_TARGET_M5272C3=y +CONFIG_SYS_TEXT_BASE=0xffe00000 CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set
configs/M5275EVB_defconfig +1 -0
@@ -1,5 +1,6 @@ CONFIG_M68K=y CONFIG_TARGET_M5275EVB=y +CONFIG_SYS_TEXT_BASE=0xffe00000 CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set
configs/M5282EVB_defconfig +1 -0
@@ -1,5 +1,6 @@ CONFIG_M68K=y CONFIG_TARGET_M5282EVB=y +CONFIG_SYS_TEXT_BASE=0xFFE00000 CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set
configs/M53017EVB_defconfig +1 -0
@@ -1,4 +1,5 @@ CONFIG_M68K=y CONFIG_TARGET_M53017EVB=y +CONFIG_SYS_TEXT_BASE=0x00000000 CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_SETEXPR is not set
configs/M5329AFEE_defconfig +1 -0
@@ -1,5 +1,6 @@ CONFIG_M68K=y CONFIG_TARGET_M5329EVB=y +CONFIG_SYS_TEXT_BASE=0x00000000 CONFIG_SYS_EXTRA_OPTIONS="NANDFLASH_SIZE=0" CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_SETEXPR is not set
configs/M5329BFEE_defconfig +1 -0
@@ -1,5 +1,6 @@ CONFIG_M68K=y CONFIG_TARGET_M5329EVB=y +CONFIG_SYS_TEXT_BASE=0x00000000 CONFIG_SYS_EXTRA_OPTIONS="NANDFLASH_SIZE=16" CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_SETEXPR is not set
configs/M5373EVB_defconfig +1 -0
@@ -1,5 +1,6 @@ CONFIG_M68K=y CONFIG_TARGET_M5373EVB=y +CONFIG_SYS_TEXT_BASE=0x00000000 CONFIG_SYS_EXTRA_OPTIONS="NANDFLASH_SIZE=16" CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_SETEXPR is not set
configs/M54418TWR_defconfig +2 -1
@@ -1,6 +1,7 @@ CONFIG_M68K=y CONFIG_TARGET_M54418TWR=y -CONFIG_SYS_EXTRA_OPTIONS="CF_SBF,SYS_SERIAL_BOOT,SYS_TEXT_BASE=0x47E00000,SYS_INPUT_CLKSRC=50000000" +CONFIG_SYS_TEXT_BASE=0x47E00000 +CONFIG_SYS_EXTRA_OPTIONS="CF_SBF,SYS_SERIAL_BOOT,SYS_INPUT_CLKSRC=50000000" CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_LOADB is not set
configs/M54418TWR_nand_mii_defconfig +2 -1
@@ -1,6 +1,7 @@ CONFIG_M68K=y CONFIG_TARGET_M54418TWR=y -CONFIG_SYS_EXTRA_OPTIONS="SYS_NAND_BOOT,SYS_TEXT_BASE=0x47E00000,SYS_INPUT_CLKSRC=25000000" +CONFIG_SYS_TEXT_BASE=0x47E00000 +CONFIG_SYS_EXTRA_OPTIONS="SYS_NAND_BOOT,SYS_INPUT_CLKSRC=25000000" CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_LOADB is not set
configs/M54418TWR_nand_rmii_defconfig +2 -1
@@ -1,6 +1,7 @@ CONFIG_M68K=y CONFIG_TARGET_M54418TWR=y -CONFIG_SYS_EXTRA_OPTIONS="SYS_NAND_BOOT,SYS_TEXT_BASE=0x47E00000,SYS_INPUT_CLKSRC=50000000" +CONFIG_SYS_TEXT_BASE=0x47E00000 +CONFIG_SYS_EXTRA_OPTIONS="SYS_NAND_BOOT,SYS_INPUT_CLKSRC=50000000" CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_LOADB is not set
configs/M54418TWR_nand_rmii_lowfreq_defconfig +2 -1
@@ -1,6 +1,7 @@ CONFIG_M68K=y CONFIG_TARGET_M54418TWR=y -CONFIG_SYS_EXTRA_OPTIONS="SYS_NAND_BOOT,LOW_MCFCLK,SYS_TEXT_BASE=0x47E00000,SYS_INPUT_CLKSRC=50000000" +CONFIG_SYS_TEXT_BASE=0x47E00000 +CONFIG_SYS_EXTRA_OPTIONS="SYS_NAND_BOOT,LOW_MCFCLK,SYS_INPUT_CLKSRC=50000000" CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_LOADB is not set
configs/M54418TWR_serial_mii_defconfig +2 -1
@@ -1,6 +1,7 @@ CONFIG_M68K=y CONFIG_TARGET_M54418TWR=y -CONFIG_SYS_EXTRA_OPTIONS="CF_SBF,SYS_SERIAL_BOOT,SYS_TEXT_BASE=0x47E00000,SYS_INPUT_CLKSRC=25000000" +CONFIG_SYS_TEXT_BASE=0x47E00000 +CONFIG_SYS_EXTRA_OPTIONS="CF_SBF,SYS_SERIAL_BOOT,SYS_INPUT_CLKSRC=25000000" CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_LOADB is not set
configs/M54418TWR_serial_rmii_defconfig +2 -1
@@ -1,6 +1,7 @@ CONFIG_M68K=y CONFIG_TARGET_M54418TWR=y -CONFIG_SYS_EXTRA_OPTIONS="CF_SBF,SYS_SERIAL_BOOT,SYS_TEXT_BASE=0x47E00000,SYS_INPUT_CLKSRC=50000000" +CONFIG_SYS_TEXT_BASE=0x47E00000 +CONFIG_SYS_EXTRA_OPTIONS="CF_SBF,SYS_SERIAL_BOOT,SYS_INPUT_CLKSRC=50000000" CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_LOADB is not set
configs/M54451EVB_defconfig +2 -1
@@ -1,6 +1,7 @@ CONFIG_M68K=y CONFIG_TARGET_M54451EVB=y -CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0x00000000,SYS_INPUT_CLKSRC=24000000" +CONFIG_SYS_TEXT_BASE=0x00000000 +CONFIG_SYS_EXTRA_OPTIONS="SYS_INPUT_CLKSRC=24000000" CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set
configs/M54451EVB_stmicro_defconfig +2 -1
@@ -1,6 +1,7 @@ CONFIG_M68K=y CONFIG_TARGET_M54451EVB=y -CONFIG_SYS_EXTRA_OPTIONS="CF_SBF,SYS_STMICRO_BOOT,SYS_TEXT_BASE=0x47e00000,SYS_INPUT_CLKSRC=24000000" +CONFIG_SYS_TEXT_BASE=0x47e00000 +CONFIG_SYS_EXTRA_OPTIONS="CF_SBF,SYS_STMICRO_BOOT,SYS_INPUT_CLKSRC=24000000" # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set # CONFIG_CMD_SETEXPR is not set
configs/M54455EVB_a66_defconfig +2 -1
@@ -1,6 +1,7 @@ CONFIG_M68K=y CONFIG_TARGET_M54455EVB=y -CONFIG_SYS_EXTRA_OPTIONS="SYS_ATMEL_BOOT,SYS_TEXT_BASE=0x04000000,SYS_INPUT_CLKSRC=66666666" +CONFIG_SYS_TEXT_BASE=0x04000000 +CONFIG_SYS_EXTRA_OPTIONS="SYS_ATMEL_BOOT,SYS_INPUT_CLKSRC=66666666" # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set # CONFIG_CMD_SETEXPR is not set
configs/M54455EVB_defconfig +2 -1
@@ -1,6 +1,7 @@ CONFIG_M68K=y CONFIG_TARGET_M54455EVB=y -CONFIG_SYS_EXTRA_OPTIONS="SYS_ATMEL_BOOT,SYS_TEXT_BASE=0x04000000,SYS_INPUT_CLKSRC=33333333" +CONFIG_SYS_TEXT_BASE=0x04000000 +CONFIG_SYS_EXTRA_OPTIONS="SYS_ATMEL_BOOT,SYS_INPUT_CLKSRC=33333333" CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set
configs/M54455EVB_i66_defconfig +2 -1
@@ -1,6 +1,7 @@ CONFIG_M68K=y CONFIG_TARGET_M54455EVB=y -CONFIG_SYS_EXTRA_OPTIONS="SYS_INTEL_BOOT,SYS_TEXT_BASE=0x00000000,SYS_INPUT_CLKSRC=66666666" +CONFIG_SYS_TEXT_BASE=0x00000000 +CONFIG_SYS_EXTRA_OPTIONS="SYS_INTEL_BOOT,SYS_INPUT_CLKSRC=66666666" # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set # CONFIG_CMD_SETEXPR is not set
configs/M54455EVB_intel_defconfig +2 -1
@@ -1,6 +1,7 @@ CONFIG_M68K=y CONFIG_TARGET_M54455EVB=y -CONFIG_SYS_EXTRA_OPTIONS="SYS_INTEL_BOOT,SYS_TEXT_BASE=0x00000000,SYS_INPUT_CLKSRC=33333333" +CONFIG_SYS_TEXT_BASE=0x00000000 +CONFIG_SYS_EXTRA_OPTIONS="SYS_INTEL_BOOT,SYS_INPUT_CLKSRC=33333333" # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set # CONFIG_CMD_SETEXPR is not set
configs/M54455EVB_stm33_defconfig +2 -1
@@ -1,6 +1,7 @@ CONFIG_M68K=y CONFIG_TARGET_M54455EVB=y -CONFIG_SYS_EXTRA_OPTIONS="SYS_STMICRO_BOOT,CF_SBF,SYS_TEXT_BASE=0x4FE00000,SYS_INPUT_CLKSRC=33333333" +CONFIG_SYS_TEXT_BASE=0x4FE00000 +CONFIG_SYS_EXTRA_OPTIONS="SYS_STMICRO_BOOT,CF_SBF,SYS_INPUT_CLKSRC=33333333" # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set # CONFIG_CMD_SETEXPR is not set
configs/M5475AFE_defconfig +1 -0
@@ -1,5 +1,6 @@ CONFIG_M68K=y CONFIG_TARGET_M5475EVB=y +CONFIG_SYS_TEXT_BASE=0xFF800000 CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=133333333,SYS_BOOTSZ=2,SYS_DRAMSZ=64" CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_SETEXPR is not set
configs/M5475BFE_defconfig +1 -0
@@ -1,5 +1,6 @@ CONFIG_M68K=y CONFIG_TARGET_M5475EVB=y +CONFIG_SYS_TEXT_BASE=0xFF800000 CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=133333333,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_NOR1SZ=16" CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_SETEXPR is not set
configs/M5475CFE_defconfig +1 -0
@@ -1,5 +1,6 @@ CONFIG_M68K=y CONFIG_TARGET_M5475EVB=y +CONFIG_SYS_TEXT_BASE=0xFF800000 CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=133333333,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_NOR1SZ=16,SYS_VIDEO,SYS_USBCTRL" CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_SETEXPR is not set
configs/M5475DFE_defconfig +1 -0
@@ -1,5 +1,6 @@ CONFIG_M68K=y CONFIG_TARGET_M5475EVB=y +CONFIG_SYS_TEXT_BASE=0xFF800000 CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=133333333,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_USBCTRL" CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_SETEXPR is not set
configs/M5475EFE_defconfig +1 -0
@@ -1,5 +1,6 @@ CONFIG_M68K=y CONFIG_TARGET_M5475EVB=y +CONFIG_SYS_TEXT_BASE=0xFF800000 CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=133333333,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_VIDEO,SYS_USBCTRL" CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_SETEXPR is not set
configs/M5475FFE_defconfig +1 -0
@@ -1,5 +1,6 @@ CONFIG_M68K=y CONFIG_TARGET_M5475EVB=y +CONFIG_SYS_TEXT_BASE=0xFF800000 CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=133333333,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_NOR1SZ=32,SYS_VIDEO,SYS_USBCTRL,SYS_DRAMSZ1=64" CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_SETEXPR is not set
configs/M5475GFE_defconfig +1 -0
@@ -1,5 +1,6 @@ CONFIG_M68K=y CONFIG_TARGET_M5475EVB=y +CONFIG_SYS_TEXT_BASE=0xFF800000 CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=133333333,SYS_BOOTSZ=4,SYS_DRAMSZ=64" CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_SETEXPR is not set
configs/M5485AFE_defconfig +1 -0
@@ -1,5 +1,6 @@ CONFIG_M68K=y CONFIG_TARGET_M5485EVB=y +CONFIG_SYS_TEXT_BASE=0xFF800000 CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=100000000,SYS_BOOTSZ=2,SYS_DRAMSZ=64" CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_SETEXPR is not set
configs/M5485BFE_defconfig +1 -0
@@ -1,5 +1,6 @@ CONFIG_M68K=y CONFIG_TARGET_M5485EVB=y +CONFIG_SYS_TEXT_BASE=0xFF800000 CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=100000000,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_NOR1SZ=16" CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_SETEXPR is not set
configs/M5485CFE_defconfig +1 -0
@@ -1,5 +1,6 @@ CONFIG_M68K=y CONFIG_TARGET_M5485EVB=y +CONFIG_SYS_TEXT_BASE=0xFF800000 CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=100000000,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_NOR1SZ=16,SYS_VIDEO,SYS_USBCTRL" CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_SETEXPR is not set
configs/M5485DFE_defconfig +1 -0
@@ -1,5 +1,6 @@ CONFIG_M68K=y CONFIG_TARGET_M5485EVB=y +CONFIG_SYS_TEXT_BASE=0xFF800000 CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=100000000,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_USBCTRL" CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_SETEXPR is not set
configs/M5485EFE_defconfig +1 -0
@@ -1,5 +1,6 @@ CONFIG_M68K=y CONFIG_TARGET_M5485EVB=y +CONFIG_SYS_TEXT_BASE=0xFF800000 CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=100000000,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_VIDEO,SYS_USBCTRL" CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_SETEXPR is not set
configs/M5485FFE_defconfig +1 -0
@@ -1,5 +1,6 @@ CONFIG_M68K=y CONFIG_TARGET_M5485EVB=y +CONFIG_SYS_TEXT_BASE=0xFF800000 CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=100000000,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_NOR1SZ=32,SYS_VIDEO,SYS_USBCTRL,SYS_DRAMSZ1=64" CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_SETEXPR is not set
configs/M5485GFE_defconfig +1 -0
@@ -1,5 +1,6 @@ CONFIG_M68K=y CONFIG_TARGET_M5485EVB=y +CONFIG_SYS_TEXT_BASE=0xFF800000 CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=100000000,SYS_BOOTSZ=4,SYS_DRAMSZ=64" CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_SETEXPR is not set
configs/M5485HFE_defconfig +1 -0
@@ -1,5 +1,6 @@ CONFIG_M68K=y CONFIG_TARGET_M5485EVB=y +CONFIG_SYS_TEXT_BASE=0xFF800000 CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=100000000,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_NOR1SZ=16,SYS_VIDEO" CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_SETEXPR is not set
configs/amcore_defconfig +1 -0
@@ -1,5 +1,6 @@ CONFIG_M68K=y CONFIG_TARGET_AMCORE=y +CONFIG_SYS_TEXT_BASE=0xffc00000 CONFIG_SYS_PROMPT="amcore $ " # CONFIG_CMD_BOOTD is not set # CONFIG_CMD_XIMG is not set
configs/cobra5272_defconfig +1 -0
@@ -1,5 +1,6 @@ CONFIG_M68K=y CONFIG_TARGET_COBRA5272=y +CONFIG_SYS_TEXT_BASE=0xffe00000 CONFIG_SYS_PROMPT="COBRA > " # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set
configs/eb_cpu5282_defconfig +2 -1
@@ -1,6 +1,7 @@ CONFIG_M68K=y CONFIG_TARGET_EB_CPU5282=y -CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0xFF000000,SYS_MONITOR_BASE=0xFF000400" +CONFIG_SYS_TEXT_BASE=0xFF000000 +CONFIG_SYS_EXTRA_OPTIONS="SYS_MONITOR_BASE=0xFF000400" CONFIG_SYS_PROMPT="\nEB+CPU5282> " # CONFIG_CMD_LOADB is not set # CONFIG_CMD_SETEXPR is not set
configs/eb_cpu5282_internal_defconfig +2 -1
@@ -1,5 +1,6 @@ CONFIG_M68K=y CONFIG_TARGET_EB_CPU5282=y -CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0xF0000000,SYS_MONITOR_BASE=0xF0000418" +CONFIG_SYS_TEXT_BASE=0xF0000000 +CONFIG_SYS_EXTRA_OPTIONS="SYS_MONITOR_BASE=0xF0000418" # CONFIG_CMD_LOADB is not set # CONFIG_CMD_SETEXPR is not set
Signature · 1 line
1.9.1
PATCH 1/8 m68k: move CONFIG_SYS_TEXT_BASE to defconfig files
Quoted 862 lines · Masahiro Yamada
For historical reason,
CONFIG_SYS_TEXT_BASEhas been specified in various ways:[1] by
board/${VENDOR}/${BOARD}/config.mk[2] by
CONFIG_SYS_EXTRA_OPTIONS
(This was "options" field of boards.cfg beforeKconfigconversion)[3] by
include/configs/${BOARD}.h[4] by configs/${BOARD}_defconfig
Most of M68K boards use either [1] or [2], both of which we want to deprecate. Switch them into [4], which is the newest way (
Kconfig).We still allow [3] too, because it is still used by many boards and we expect much time for conversion.
Signed-off-by Masahiro Yamada <[email protected]>---
Kconfig | 3 ++- board/cobra5272/config.mk | 9 --------- board/freescale/m5208evbe/config.mk | 9 --------- board/freescale/m5249evb/config.mk | 9 --------- board/freescale/m5253demo/config.mk | 9 --------- board/freescale/m5253evbe/config.mk | 9 --------- board/freescale/m5272c3/config.mk | 9 --------- board/freescale/m5275evb/config.mk | 9 --------- board/freescale/m5282evb/config.mk | 9 --------- board/freescale/m53017evb/config.mk | 9 --------- board/freescale/m5329evb/config.mk | 9 --------- board/freescale/m5373evb/config.mk | 9 --------- board/freescale/m547xevb/config.mk | 9 --------- board/freescale/m548xevb/config.mk | 9 --------- board/sysam/amcore/config.mk | 7 ------- configs/M5208EVBE_defconfig | 1 + configs/M52277EVB_defconfig | 3 ++- configs/M52277EVB_stmicro_defconfig | 3 ++- configs/M5235EVB_Flash32_defconfig | 3 ++- configs/M5235EVB_defconfig | 2 +- configs/M5249EVB_defconfig | 1 + configs/M5253DEMO_defconfig | 1 + configs/M5253EVBE_defconfig | 1 + configs/M5272C3_defconfig | 1 + configs/M5275EVB_defconfig | 1 + configs/M5282EVB_defconfig | 1 + configs/M53017EVB_defconfig | 1 + configs/M5329AFEE_defconfig | 1 + configs/M5329BFEE_defconfig | 1 + configs/M5373EVB_defconfig | 1 + configs/M54418TWR_defconfig | 3 ++- configs/M54418TWR_nand_mii_defconfig | 3 ++- configs/M54418TWR_nand_rmii_defconfig | 3 ++- configs/M54418TWR_nand_rmii_lowfreq_defconfig | 3 ++- configs/M54418TWR_serial_mii_defconfig | 3 ++- configs/M54418TWR_serial_rmii_defconfig | 3 ++- configs/M54451EVB_defconfig | 3 ++- configs/M54451EVB_stmicro_defconfig | 3 ++- configs/M54455EVB_a66_defconfig | 3 ++- configs/M54455EVB_defconfig | 3 ++- configs/M54455EVB_i66_defconfig | 3 ++- configs/M54455EVB_intel_defconfig | 3 ++- configs/M54455EVB_stm33_defconfig | 3 ++- configs/M5475AFE_defconfig | 1 + configs/M5475BFE_defconfig | 1 + configs/M5475CFE_defconfig | 1 + configs/M5475DFE_defconfig | 1 + configs/M5475EFE_defconfig | 1 + configs/M5475FFE_defconfig | 1 + configs/M5475GFE_defconfig | 1 + configs/M5485AFE_defconfig | 1 + configs/M5485BFE_defconfig | 1 + configs/M5485CFE_defconfig | 1 + configs/M5485DFE_defconfig | 1 + configs/M5485EFE_defconfig | 1 + configs/M5485FFE_defconfig | 1 + configs/M5485GFE_defconfig | 1 + configs/M5485HFE_defconfig | 1 + configs/amcore_defconfig | 1 + configs/cobra5272_defconfig | 1 + configs/eb_cpu5282_defconfig | 3 ++- configs/eb_cpu5282_internal_defconfig | 3 ++- 62 files changed, 67 insertions(+), 144 deletions(-)delete mode 100644
board/cobra5272/config.mkdelete mode 100644board/freescale/m5208evbe/config.mkdelete mode 100644board/freescale/m5249evb/config.mkdelete mode 100644board/freescale/m5253demo/config.mkdelete mode 100644board/freescale/m5253evbe/config.mkdelete mode 100644board/freescale/m5272c3/config.mkdelete mode 100644board/freescale/m5275evb/config.mkdelete mode 100644board/freescale/m5282evb/config.mkdelete mode 100644board/freescale/m53017evb/config.mkdelete mode 100644board/freescale/m5329evb/config.mkdelete mode 100644board/freescale/m5373evb/config.mkdelete mode 100644board/freescale/m547xevb/config.mkdelete mode 100644board/freescale/m548xevb/config.mkdelete mode 100644board/sysam/amcore/config.mkKconfig +2
-1@@ -208,7 +208,8 @@ config SYS_EXTRA_OPTIONS new boards should not use this option. config SYS_TEXT_BASE - depends on SPARC || ARC || X86 || ARCH_UNIPHIER || ARCH_ZYNQMP + depends on SPARC || ARC || X86 || ARCH_UNIPHIER || ARCH_ZYNQMP || \ + (M68K && !TARGET_ASTRO_MCF5373L) depends on !EFI_APP hex "Text Base" helpboard/cobra5272/config.mk deleted +0
-9@@ -1,9 +0,0 @@ -# -# (C) Copyright 2000-2003 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# Coldfire contribution by Bernhard Kuhn <[email protected]> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -CONFIG_SYS_TEXT_BASE = 0xffe00000board/freescale/m5208evbe/config.mk deleted +0
-9@@ -1,9 +0,0 @@ -# -# (C) Copyright 2000-2003 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# Coldfire contribution by Bernhard Kuhn <[email protected]> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -CONFIG_SYS_TEXT_BASE = 0board/freescale/m5249evb/config.mk deleted +0
-9@@ -1,9 +0,0 @@ -# -# (C) Copyright 2000-2003 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# Coldfire contribution by Bernhard Kuhn <[email protected]> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -CONFIG_SYS_TEXT_BASE = 0xffe00000board/freescale/m5253demo/config.mk deleted +0
-9@@ -1,9 +0,0 @@ -# -# (C) Copyright 2000-2003 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# Coldfire contribution by Bernhard Kuhn <[email protected]> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -CONFIG_SYS_TEXT_BASE = 0xFF800000board/freescale/m5253evbe/config.mk deleted +0
-9@@ -1,9 +0,0 @@ -# -# (C) Copyright 2000-2003 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# Coldfire contribution by Bernhard Kuhn <[email protected]> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -CONFIG_SYS_TEXT_BASE = 0xffe00000board/freescale/m5272c3/config.mk deleted +0
-9@@ -1,9 +0,0 @@ -# -# (C) Copyright 2000-2003 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# Coldfire contribution by Bernhard Kuhn <[email protected]> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -CONFIG_SYS_TEXT_BASE = 0xffe00000board/freescale/m5275evb/config.mk deleted +0
-9@@ -1,9 +0,0 @@ -# -# (C) Copyright 2000-2003 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# Coldfire contribution by Bernhard Kuhn <[email protected]> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -CONFIG_SYS_TEXT_BASE = 0xffe00000board/freescale/m5282evb/config.mk deleted +0
-9@@ -1,9 +0,0 @@ -# -# (C) Copyright 2000-2003 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# Coldfire contribution by Bernhard Kuhn <[email protected]> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -CONFIG_SYS_TEXT_BASE = 0xFFE00000board/freescale/m53017evb/config.mk deleted +0
-9@@ -1,9 +0,0 @@ -# -# (C) Copyright 2000-2003 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# Coldfire contribution by Bernhard Kuhn <[email protected]> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -CONFIG_SYS_TEXT_BASE = 0board/freescale/m5329evb/config.mk deleted +0
-9@@ -1,9 +0,0 @@ -# -# (C) Copyright 2000-2003 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# Coldfire contribution by Bernhard Kuhn <[email protected]> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -CONFIG_SYS_TEXT_BASE = 0board/freescale/m5373evb/config.mk deleted +0
-9@@ -1,9 +0,0 @@ -# -# (C) Copyright 2000-2003 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# Coldfire contribution by Bernhard Kuhn <[email protected]> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -CONFIG_SYS_TEXT_BASE = 0board/freescale/m547xevb/config.mk deleted +0
-9@@ -1,9 +0,0 @@ -# -# (C) Copyright 2000-2003 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# Coldfire contribution by Bernhard Kuhn <[email protected]> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -CONFIG_SYS_TEXT_BASE = 0xFF800000board/freescale/m548xevb/config.mk deleted +0
-9@@ -1,9 +0,0 @@ -# -# (C) Copyright 2000-2003 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# Coldfire contribution by Bernhard Kuhn <[email protected]> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -CONFIG_SYS_TEXT_BASE = 0xFF800000board/sysam/amcore/config.mk deleted +0
-7@@ -1,7 +0,0 @@ -# -# (C) Copyright 2014 Angelo Dureghello <[email protected]> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -CONFIG_SYS_TEXT_BASE = 0xffc00000configs/M5208EVBE_defconfig +1
-0@@ -1,4 +1,5 @@ CONFIG_M68K=y CONFIG_TARGET_M5208EVBE=y +CONFIG_SYS_TEXT_BASE=0x00000000 CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_SETEXPR is not setconfigs/M52277EVB_defconfig +2
-1@@ -1,6 +1,7 @@ CONFIG_M68K=y CONFIG_TARGET_M52277EVB=y -CONFIG_SYS_EXTRA_OPTIONS="SYS_SPANSION_BOOT,SYS_TEXT_BASE=0x00000000" +CONFIG_SYS_TEXT_BASE=0x00000000 +CONFIG_SYS_EXTRA_OPTIONS="SYS_SPANSION_BOOT" CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NET is not setconfigs/M52277EVB_stmicro_defconfig +2
-1@@ -1,6 +1,7 @@ CONFIG_M68K=y CONFIG_TARGET_M52277EVB=y -CONFIG_SYS_EXTRA_OPTIONS="CF_SBF,SYS_STMICRO_BOOT,SYS_TEXT_BASE=0x43E00000" +CONFIG_SYS_TEXT_BASE=0x43E00000 +CONFIG_SYS_EXTRA_OPTIONS="CF_SBF,SYS_STMICRO_BOOT" # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NET is not set # CONFIG_CMD_NFS is not setconfigs/M5235EVB_Flash32_defconfig +2
-1@@ -1,6 +1,7 @@ CONFIG_M68K=y CONFIG_TARGET_M5235EVB=y -CONFIG_SYS_EXTRA_OPTIONS="NORFLASH_PS32BIT,SYS_TEXT_BASE=0xFFC00000" +CONFIG_SYS_TEXT_BASE=0xFFC00000 +CONFIG_SYS_EXTRA_OPTIONS="NORFLASH_PS32BIT" # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set # CONFIG_CMD_SETEXPR is not setconfigs/M5235EVB_defconfig +1
-1@@ -1,6 +1,6 @@ CONFIG_M68K=y CONFIG_TARGET_M5235EVB=y -CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0xFFE00000" +CONFIG_SYS_TEXT_BASE=0xFFE00000 CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not setconfigs/M5249EVB_defconfig +1
-0@@ -1,4 +1,5 @@ CONFIG_M68K=y CONFIG_TARGET_M5249EVB=y +CONFIG_SYS_TEXT_BASE=0xffe00000 # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NET is not setconfigs/M5253DEMO_defconfig +1
-0@@ -1,3 +1,4 @@ CONFIG_M68K=y CONFIG_TARGET_M5253DEMO=y +CONFIG_SYS_TEXT_BASE=0xFF800000 # CONFIG_CMD_SETEXPR is not setconfigs/M5253EVBE_defconfig +1
-0@@ -1,4 +1,5 @@ CONFIG_M68K=y CONFIG_TARGET_M5253EVBE=y +CONFIG_SYS_TEXT_BASE=0xFFE00000 # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NET is not setconfigs/M5272C3_defconfig +1
-0@@ -1,5 +1,6 @@ CONFIG_M68K=y CONFIG_TARGET_M5272C3=y +CONFIG_SYS_TEXT_BASE=0xffe00000 CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not setconfigs/M5275EVB_defconfig +1
-0@@ -1,5 +1,6 @@ CONFIG_M68K=y CONFIG_TARGET_M5275EVB=y +CONFIG_SYS_TEXT_BASE=0xffe00000 CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not setconfigs/M5282EVB_defconfig +1
-0@@ -1,5 +1,6 @@ CONFIG_M68K=y CONFIG_TARGET_M5282EVB=y +CONFIG_SYS_TEXT_BASE=0xFFE00000 CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not setconfigs/M53017EVB_defconfig +1
-0@@ -1,4 +1,5 @@ CONFIG_M68K=y CONFIG_TARGET_M53017EVB=y +CONFIG_SYS_TEXT_BASE=0x00000000 CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_SETEXPR is not setconfigs/M5329AFEE_defconfig +1
-0@@ -1,5 +1,6 @@ CONFIG_M68K=y CONFIG_TARGET_M5329EVB=y +CONFIG_SYS_TEXT_BASE=0x00000000 CONFIG_SYS_EXTRA_OPTIONS="NANDFLASH_SIZE=0" CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_SETEXPR is not setconfigs/M5329BFEE_defconfig +1
-0@@ -1,5 +1,6 @@ CONFIG_M68K=y CONFIG_TARGET_M5329EVB=y +CONFIG_SYS_TEXT_BASE=0x00000000 CONFIG_SYS_EXTRA_OPTIONS="NANDFLASH_SIZE=16" CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_SETEXPR is not setconfigs/M5373EVB_defconfig +1
-0@@ -1,5 +1,6 @@ CONFIG_M68K=y CONFIG_TARGET_M5373EVB=y +CONFIG_SYS_TEXT_BASE=0x00000000 CONFIG_SYS_EXTRA_OPTIONS="NANDFLASH_SIZE=16" CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_SETEXPR is not setconfigs/M54418TWR_defconfig +2
-1@@ -1,6 +1,7 @@ CONFIG_M68K=y CONFIG_TARGET_M54418TWR=y -CONFIG_SYS_EXTRA_OPTIONS="CF_SBF,SYS_SERIAL_BOOT,SYS_TEXT_BASE=0x47E00000,SYS_INPUT_CLKSRC=50000000" +CONFIG_SYS_TEXT_BASE=0x47E00000 +CONFIG_SYS_EXTRA_OPTIONS="CF_SBF,SYS_SERIAL_BOOT,SYS_INPUT_CLKSRC=50000000" CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_LOADB is not setconfigs/M54418TWR_nand_mii_defconfig +2
-1@@ -1,6 +1,7 @@ CONFIG_M68K=y CONFIG_TARGET_M54418TWR=y -CONFIG_SYS_EXTRA_OPTIONS="SYS_NAND_BOOT,SYS_TEXT_BASE=0x47E00000,SYS_INPUT_CLKSRC=25000000" +CONFIG_SYS_TEXT_BASE=0x47E00000 +CONFIG_SYS_EXTRA_OPTIONS="SYS_NAND_BOOT,SYS_INPUT_CLKSRC=25000000" CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_LOADB is not setconfigs/M54418TWR_nand_rmii_defconfig +2
-1@@ -1,6 +1,7 @@ CONFIG_M68K=y CONFIG_TARGET_M54418TWR=y -CONFIG_SYS_EXTRA_OPTIONS="SYS_NAND_BOOT,SYS_TEXT_BASE=0x47E00000,SYS_INPUT_CLKSRC=50000000" +CONFIG_SYS_TEXT_BASE=0x47E00000 +CONFIG_SYS_EXTRA_OPTIONS="SYS_NAND_BOOT,SYS_INPUT_CLKSRC=50000000" CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_LOADB is not setconfigs/M54418TWR_nand_rmii_lowfreq_defconfig +2
-1@@ -1,6 +1,7 @@ CONFIG_M68K=y CONFIG_TARGET_M54418TWR=y -CONFIG_SYS_EXTRA_OPTIONS="SYS_NAND_BOOT,LOW_MCFCLK,SYS_TEXT_BASE=0x47E00000,SYS_INPUT_CLKSRC=50000000" +CONFIG_SYS_TEXT_BASE=0x47E00000 +CONFIG_SYS_EXTRA_OPTIONS="SYS_NAND_BOOT,LOW_MCFCLK,SYS_INPUT_CLKSRC=50000000" CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_LOADB is not setconfigs/M54418TWR_serial_mii_defconfig +2
-1@@ -1,6 +1,7 @@ CONFIG_M68K=y CONFIG_TARGET_M54418TWR=y -CONFIG_SYS_EXTRA_OPTIONS="CF_SBF,SYS_SERIAL_BOOT,SYS_TEXT_BASE=0x47E00000,SYS_INPUT_CLKSRC=25000000" +CONFIG_SYS_TEXT_BASE=0x47E00000 +CONFIG_SYS_EXTRA_OPTIONS="CF_SBF,SYS_SERIAL_BOOT,SYS_INPUT_CLKSRC=25000000" CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_LOADB is not setconfigs/M54418TWR_serial_rmii_defconfig +2
-1@@ -1,6 +1,7 @@ CONFIG_M68K=y CONFIG_TARGET_M54418TWR=y -CONFIG_SYS_EXTRA_OPTIONS="CF_SBF,SYS_SERIAL_BOOT,SYS_TEXT_BASE=0x47E00000,SYS_INPUT_CLKSRC=50000000" +CONFIG_SYS_TEXT_BASE=0x47E00000 +CONFIG_SYS_EXTRA_OPTIONS="CF_SBF,SYS_SERIAL_BOOT,SYS_INPUT_CLKSRC=50000000" CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_LOADB is not setconfigs/M54451EVB_defconfig +2
-1@@ -1,6 +1,7 @@ CONFIG_M68K=y CONFIG_TARGET_M54451EVB=y -CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0x00000000,SYS_INPUT_CLKSRC=24000000" +CONFIG_SYS_TEXT_BASE=0x00000000 +CONFIG_SYS_EXTRA_OPTIONS="SYS_INPUT_CLKSRC=24000000" CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not setconfigs/M54451EVB_stmicro_defconfig +2
-1@@ -1,6 +1,7 @@ CONFIG_M68K=y CONFIG_TARGET_M54451EVB=y -CONFIG_SYS_EXTRA_OPTIONS="CF_SBF,SYS_STMICRO_BOOT,SYS_TEXT_BASE=0x47e00000,SYS_INPUT_CLKSRC=24000000" +CONFIG_SYS_TEXT_BASE=0x47e00000 +CONFIG_SYS_EXTRA_OPTIONS="CF_SBF,SYS_STMICRO_BOOT,SYS_INPUT_CLKSRC=24000000" # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set # CONFIG_CMD_SETEXPR is not setconfigs/M54455EVB_a66_defconfig +2
-1@@ -1,6 +1,7 @@ CONFIG_M68K=y CONFIG_TARGET_M54455EVB=y -CONFIG_SYS_EXTRA_OPTIONS="SYS_ATMEL_BOOT,SYS_TEXT_BASE=0x04000000,SYS_INPUT_CLKSRC=66666666" +CONFIG_SYS_TEXT_BASE=0x04000000 +CONFIG_SYS_EXTRA_OPTIONS="SYS_ATMEL_BOOT,SYS_INPUT_CLKSRC=66666666" # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set # CONFIG_CMD_SETEXPR is not setconfigs/M54455EVB_defconfig +2
-1@@ -1,6 +1,7 @@ CONFIG_M68K=y CONFIG_TARGET_M54455EVB=y -CONFIG_SYS_EXTRA_OPTIONS="SYS_ATMEL_BOOT,SYS_TEXT_BASE=0x04000000,SYS_INPUT_CLKSRC=33333333" +CONFIG_SYS_TEXT_BASE=0x04000000 +CONFIG_SYS_EXTRA_OPTIONS="SYS_ATMEL_BOOT,SYS_INPUT_CLKSRC=33333333" CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not setconfigs/M54455EVB_i66_defconfig +2
-1@@ -1,6 +1,7 @@ CONFIG_M68K=y CONFIG_TARGET_M54455EVB=y -CONFIG_SYS_EXTRA_OPTIONS="SYS_INTEL_BOOT,SYS_TEXT_BASE=0x00000000,SYS_INPUT_CLKSRC=66666666" +CONFIG_SYS_TEXT_BASE=0x00000000 +CONFIG_SYS_EXTRA_OPTIONS="SYS_INTEL_BOOT,SYS_INPUT_CLKSRC=66666666" # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set # CONFIG_CMD_SETEXPR is not setconfigs/M54455EVB_intel_defconfig +2
-1@@ -1,6 +1,7 @@ CONFIG_M68K=y CONFIG_TARGET_M54455EVB=y -CONFIG_SYS_EXTRA_OPTIONS="SYS_INTEL_BOOT,SYS_TEXT_BASE=0x00000000,SYS_INPUT_CLKSRC=33333333" +CONFIG_SYS_TEXT_BASE=0x00000000 +CONFIG_SYS_EXTRA_OPTIONS="SYS_INTEL_BOOT,SYS_INPUT_CLKSRC=33333333" # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set # CONFIG_CMD_SETEXPR is not setconfigs/M54455EVB_stm33_defconfig +2
-1@@ -1,6 +1,7 @@ CONFIG_M68K=y CONFIG_TARGET_M54455EVB=y -CONFIG_SYS_EXTRA_OPTIONS="SYS_STMICRO_BOOT,CF_SBF,SYS_TEXT_BASE=0x4FE00000,SYS_INPUT_CLKSRC=33333333" +CONFIG_SYS_TEXT_BASE=0x4FE00000 +CONFIG_SYS_EXTRA_OPTIONS="SYS_STMICRO_BOOT,CF_SBF,SYS_INPUT_CLKSRC=33333333" # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set # CONFIG_CMD_SETEXPR is not setconfigs/M5475AFE_defconfig +1
-0@@ -1,5 +1,6 @@ CONFIG_M68K=y CONFIG_TARGET_M5475EVB=y +CONFIG_SYS_TEXT_BASE=0xFF800000 CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=133333333,SYS_BOOTSZ=2,SYS_DRAMSZ=64" CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_SETEXPR is not setconfigs/M5475BFE_defconfig +1
-0@@ -1,5 +1,6 @@ CONFIG_M68K=y CONFIG_TARGET_M5475EVB=y +CONFIG_SYS_TEXT_BASE=0xFF800000 CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=133333333,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_NOR1SZ=16" CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_SETEXPR is not setconfigs/M5475CFE_defconfig +1
-0@@ -1,5 +1,6 @@ CONFIG_M68K=y CONFIG_TARGET_M5475EVB=y +CONFIG_SYS_TEXT_BASE=0xFF800000 CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=133333333,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_NOR1SZ=16,SYS_VIDEO,SYS_USBCTRL" CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_SETEXPR is not setconfigs/M5475DFE_defconfig +1
-0@@ -1,5 +1,6 @@ CONFIG_M68K=y CONFIG_TARGET_M5475EVB=y +CONFIG_SYS_TEXT_BASE=0xFF800000 CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=133333333,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_USBCTRL" CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_SETEXPR is not setconfigs/M5475EFE_defconfig +1
-0@@ -1,5 +1,6 @@ CONFIG_M68K=y CONFIG_TARGET_M5475EVB=y +CONFIG_SYS_TEXT_BASE=0xFF800000 CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=133333333,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_VIDEO,SYS_USBCTRL" CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_SETEXPR is not setconfigs/M5475FFE_defconfig +1
-0@@ -1,5 +1,6 @@ CONFIG_M68K=y CONFIG_TARGET_M5475EVB=y +CONFIG_SYS_TEXT_BASE=0xFF800000 CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=133333333,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_NOR1SZ=32,SYS_VIDEO,SYS_USBCTRL,SYS_DRAMSZ1=64" CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_SETEXPR is not setconfigs/M5475GFE_defconfig +1
-0@@ -1,5 +1,6 @@ CONFIG_M68K=y CONFIG_TARGET_M5475EVB=y +CONFIG_SYS_TEXT_BASE=0xFF800000 CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=133333333,SYS_BOOTSZ=4,SYS_DRAMSZ=64" CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_SETEXPR is not setconfigs/M5485AFE_defconfig +1
-0@@ -1,5 +1,6 @@ CONFIG_M68K=y CONFIG_TARGET_M5485EVB=y +CONFIG_SYS_TEXT_BASE=0xFF800000 CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=100000000,SYS_BOOTSZ=2,SYS_DRAMSZ=64" CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_SETEXPR is not setconfigs/M5485BFE_defconfig +1
-0@@ -1,5 +1,6 @@ CONFIG_M68K=y CONFIG_TARGET_M5485EVB=y +CONFIG_SYS_TEXT_BASE=0xFF800000 CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=100000000,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_NOR1SZ=16" CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_SETEXPR is not setconfigs/M5485CFE_defconfig +1
-0@@ -1,5 +1,6 @@ CONFIG_M68K=y CONFIG_TARGET_M5485EVB=y +CONFIG_SYS_TEXT_BASE=0xFF800000 CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=100000000,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_NOR1SZ=16,SYS_VIDEO,SYS_USBCTRL" CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_SETEXPR is not setconfigs/M5485DFE_defconfig +1
-0@@ -1,5 +1,6 @@ CONFIG_M68K=y CONFIG_TARGET_M5485EVB=y +CONFIG_SYS_TEXT_BASE=0xFF800000 CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=100000000,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_USBCTRL" CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_SETEXPR is not setconfigs/M5485EFE_defconfig +1
-0@@ -1,5 +1,6 @@ CONFIG_M68K=y CONFIG_TARGET_M5485EVB=y +CONFIG_SYS_TEXT_BASE=0xFF800000 CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=100000000,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_VIDEO,SYS_USBCTRL" CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_SETEXPR is not setconfigs/M5485FFE_defconfig +1
-0@@ -1,5 +1,6 @@ CONFIG_M68K=y CONFIG_TARGET_M5485EVB=y +CONFIG_SYS_TEXT_BASE=0xFF800000 CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=100000000,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_NOR1SZ=32,SYS_VIDEO,SYS_USBCTRL,SYS_DRAMSZ1=64" CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_SETEXPR is not setconfigs/M5485GFE_defconfig +1
-0@@ -1,5 +1,6 @@ CONFIG_M68K=y CONFIG_TARGET_M5485EVB=y +CONFIG_SYS_TEXT_BASE=0xFF800000 CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=100000000,SYS_BOOTSZ=4,SYS_DRAMSZ=64" CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_SETEXPR is not setconfigs/M5485HFE_defconfig +1
-0@@ -1,5 +1,6 @@ CONFIG_M68K=y CONFIG_TARGET_M5485EVB=y +CONFIG_SYS_TEXT_BASE=0xFF800000 CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=100000000,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_NOR1SZ=16,SYS_VIDEO" CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_SETEXPR is not setconfigs/amcore_defconfig +1
-0@@ -1,5 +1,6 @@ CONFIG_M68K=y CONFIG_TARGET_AMCORE=y +CONFIG_SYS_TEXT_BASE=0xffc00000 CONFIG_SYS_PROMPT="amcore $ " # CONFIG_CMD_BOOTD is not set # CONFIG_CMD_XIMG is not setconfigs/cobra5272_defconfig +1
-0@@ -1,5 +1,6 @@ CONFIG_M68K=y CONFIG_TARGET_COBRA5272=y +CONFIG_SYS_TEXT_BASE=0xffe00000 CONFIG_SYS_PROMPT="COBRA > " # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not setconfigs/eb_cpu5282_defconfig +2
-1@@ -1,6 +1,7 @@ CONFIG_M68K=y CONFIG_TARGET_EB_CPU5282=y -CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0xFF000000,SYS_MONITOR_BASE=0xFF000400" +CONFIG_SYS_TEXT_BASE=0xFF000000 +CONFIG_SYS_EXTRA_OPTIONS="SYS_MONITOR_BASE=0xFF000400" CONFIG_SYS_PROMPT="\nEB+CPU5282> " # CONFIG_CMD_LOADB is not set # CONFIG_CMD_SETEXPR is not setconfigs/eb_cpu5282_internal_defconfig +0
-0
configs/eb_cpu5282_internal_defconfig line 6
Quoted 7 lines
configs/eb_cpu5282_internal_defconfig +2
-1@@ -1,5 +1,6 @@ CONFIG_M68K=y CONFIG_TARGET_EB_CPU5282=y -CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0xF0000000,SYS_MONITOR_BASE=0xF0000418" +CONFIG_SYS_TEXT_BASE=0xF0000000 +CONFIG_SYS_EXTRA_OPTIONS="SYS_MONITOR_BASE=0xF0000418" # CONFIG_CMD_LOADB is not set # CONFIG_CMD_SETEXPR is not set
PATCH 1/8 m68k: move CONFIG_SYS_TEXT_BASE to defconfig files
In reply to Masahiro YamadaQuoted 12 lines · Masahiro Yamada
For historical reason,
CONFIG_SYS_TEXT_BASEhas been specified in various ways:[1] by
board/${VENDOR}/${BOARD}/config.mk[2] by
CONFIG_SYS_EXTRA_OPTIONS
(This was "options" field of boards.cfg beforeKconfigconversion)[3] by
include/configs/${BOARD}.h[4] by configs/${BOARD}_defconfig
Quoted 8 lines
Most of M68K boards use either [1] or [2], both of which we want to deprecate. Switch them into [4], which is the newest way (
Kconfig).We still allow [3] too, because it is still used by many boards and we expect much time for conversion.
Signed-off-by Masahiro Yamada <[email protected]>---
Reviewed-by Simon Glass <[email protected]>
PATCH 1/8 m68k: move CONFIG_SYS_TEXT_BASE to defconfig files
In reply to Masahiro YamadaQuoted 15 lines · Masahiro Yamada
For historical reason,
CONFIG_SYS_TEXT_BASEhas been specified in various ways:[1] by
board/${VENDOR}/${BOARD}/config.mk[2] by
CONFIG_SYS_EXTRA_OPTIONS
(This was "options" field of boards.cfg beforeKconfigconversion)[3] by
include/configs/${BOARD}.h[4] by configs/${BOARD}_defconfig
Most of M68K boards use either [1] or [2], both of which we want to deprecate. Switch them into [4], which is the newest way (
Kconfig).
Quoted 6 lines
We still allow [3] too, because it is still used by many boards and we expect much time for conversion.
Signed-off-by Masahiro Yamada <[email protected]>Reviewed-by Simon Glass <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160120/6e3d2602/attachment.sig>
PATCH 2/8 m68k: M54418TWR: drop board/freescale/m54418twr/config.mk
In reply to Masahiro YamadaThe board/freescale/m54418twr/config.mk defined TEXT_BASE, which has the same value as CONFIG_SYS_TEXT_BASE. The TEXT_BASE is referenced by two files:
- arch/m68k/cpu/mcf5445x/start.S and include/
- include/configs/M54418TWR.h
Replace the references with CONFIG_SYS_TEXT_BASE and delete board/freescale/m54418twr/config.mk.
Signed-off-by Masahiro Yamada <[email protected]>
---
arch/m68k/cpu/mcf5445x/start.S | 8 ++++---- board/freescale/m54418twr/config.mk | 7 ------- include/configs/M54418TWR.h | 2 +- 3 files changed, 5 insertions(+), 12 deletions(-) delete mode 100644 board/freescale/m54418twr/config.mk
arch/m68k/cpu/mcf5445x/start.S +4 -4
@@ -34,7 +34,7 @@ #if defined(CONFIG_SERIAL_BOOT) #define ASM_DRAMINIT (asm_dram_init - CONFIG_SYS_TEXT_BASE + CONFIG_SYS_INIT_RAM_ADDR) -#define ASM_DRAMINIT_N (asm_dram_init - TEXT_BASE) +#define ASM_DRAMINIT_N (asm_dram_init - CONFIG_SYS_TEXT_BASE) #define ASM_SBF_IMG_HDR (asm_sbf_img_hdr - CONFIG_SYS_TEXT_BASE + CONFIG_SYS_INIT_RAM_ADDR) #endif
@@ -490,7 +490,7 @@ asm_dspi_rd_status: /* copy 4 boot pages to dram as soon as possible */ /* each page is 996 bytes (1056 total with 60 ECC bytes */ move.l #0x00000000, %a1 /* src */ - move.l #TEXT_BASE, %a2 /* dst */ + move.l #CONFIG_SYS_TEXT_BASE, %a2 /* dst */ move.l #0x3E0, %d0 /* sz in long */ asm_boot_nand_copy:
@@ -571,7 +571,7 @@ asm_nand_init: move.l #4, %d2 /* start at 4 */ move.l #0xFC0FFF04, %a0 /* cmd2 */ move.l #0xFC0FFF0C, %a1 /* rar */ - move.l #(TEXT_BASE + 0xF80), %a2 /* dst */ + move.l #(CONFIG_SYS_TEXT_BASE + 0xF80), %a2 /* dst */ asm_nand_read: move.l #0x11000000, %d0 /* rar */
@@ -609,7 +609,7 @@ asm_nand_copy: bgt asm_nand_read /* jump to memory and execute */ - move.l #(TEXT_BASE + 0x400), %a0 + move.l #(CONFIG_SYS_TEXT_BASE + 0x400), %a0 jmp (%a0) #endif /* CONFIG_SYS_NAND_BOOT */
board/freescale/m54418twr/config.mk deleted +0 -7
@@ -1,7 +0,0 @@ -# Copyright 2010-2012 Freescale Semiconductor, Inc. -# TsiChung Liew (Tsi-Chung.Liew at freescale.com) -# -# SPDX-License-Identifier: GPL-2.0+ -# - -PLATFORM_CPPFLAGS += -DTEXT_BASE=$(CONFIG_SYS_TEXT_BASE)
include/configs/M54418TWR.h +1 -1
@@ -267,7 +267,7 @@#endif #if defined(CONFIG_SERIAL_BOOT ) -#define CONFIG_SYS_MONITOR_BASE (TEXT_BASE + 0x400) +#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_TEXT_BASE + 0x400)#else #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400)#endif
Signature · 1 line
1.9.1
PATCH 2/8 m68k: M54418TWR: drop board/freescale/m54418twr/config.mk
Quoted 77 lines · Masahiro Yamada
The
board/freescale/m54418twr/config.mkdefinedTEXT_BASE, which has the same value asCONFIG_SYS_TEXT_BASE. TheTEXT_BASEis referenced by two files:
-arch/m68k/cpu/mcf5445x/start.Sandinclude/
-include/configs/M54418TWR.hReplace the references with
CONFIG_SYS_TEXT_BASEand deleteboard/freescale/m54418twr/config.mk.Signed-off-by Masahiro Yamada <[email protected]>---
arch/m68k/cpu/mcf5445x/start.S | 8 ++++---- board/freescale/m54418twr/config.mk | 7 ------- include/configs/M54418TWR.h | 2 +- 3 files changed, 5 insertions(+), 12 deletions(-)delete mode 100644
board/freescale/m54418twr/config.mkarch/m68k/cpu/mcf5445x/start.S +4
-4@@ -34,7 +34,7 @@ #if defined(CONFIG_SERIAL_BOOT) #define ASM_DRAMINIT (asm_dram_init - CONFIG_SYS_TEXT_BASE + CONFIG_SYS_INIT_RAM_ADDR) -#define ASM_DRAMINIT_N (asm_dram_init - TEXT_BASE) +#define ASM_DRAMINIT_N (asm_dram_init - CONFIG_SYS_TEXT_BASE) #define ASM_SBF_IMG_HDR (asm_sbf_img_hdr - CONFIG_SYS_TEXT_BASE + CONFIG_SYS_INIT_RAM_ADDR) #endif@@ -490,7 +490,7 @@ asm_dspi_rd_status: /* copy 4 boot pages to dram as soon as possible */ /* each page is 996 bytes (1056 total with 60 ECC bytes */ move.l #0x00000000, %a1 /* src */ - move.l #TEXT_BASE, %a2 /* dst */ + move.l #CONFIG_SYS_TEXT_BASE, %a2 /* dst */ move.l #0x3E0, %d0 /* sz in long */ asm_boot_nand_copy:@@ -571,7 +571,7 @@ asm_nand_init: move.l #4, %d2 /* start at 4 */ move.l #0xFC0FFF04, %a0 /* cmd2 */ move.l #0xFC0FFF0C, %a1 /* rar */ - move.l #(TEXT_BASE + 0xF80), %a2 /* dst */ + move.l #(CONFIG_SYS_TEXT_BASE + 0xF80), %a2 /* dst */ asm_nand_read: move.l #0x11000000, %d0 /* rar */@@ -609,7 +609,7 @@ asm_nand_copy: bgt asm_nand_read /* jump to memory and execute */ - move.l #(TEXT_BASE + 0x400), %a0 + move.l #(CONFIG_SYS_TEXT_BASE + 0x400), %a0 jmp (%a0) #endif /* CONFIG_SYS_NAND_BOOT */board/freescale/m54418twr/config.mk deleted +0
-7@@ -1,7 +0,0 @@ -# Copyright 2010-2012 Freescale Semiconductor, Inc. -# TsiChung Liew (Tsi-Chung.Liew at freescale.com) -# -# SPDX-License-Identifier: GPL-2.0+ -# - -PLATFORM_CPPFLAGS += -DTEXT_BASE=$(CONFIG_SYS_TEXT_BASE)include/configs/M54418TWR.h +0
-0
include/configs/M54418TWR.h line 273
Quoted 8 lines
include/configs/M54418TWR.h +1
-1@@ -267,7 +267,7 @@#endif #if defined(CONFIG_SERIAL_BOOT ) -#define CONFIG_SYS_MONITOR_BASE (TEXT_BASE + 0x400) +#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_TEXT_BASE + 0x400)#else #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400)#endif
PATCH 2/8 m68k: M54418TWR: drop board/freescale/m54418twr/config.mk
In reply to Masahiro YamadaQuoted 11 lines · Masahiro Yamada
The
board/freescale/m54418twr/config.mkdefinedTEXT_BASE, which has the same value asCONFIG_SYS_TEXT_BASE. TheTEXT_BASEis referenced by two files:
-arch/m68k/cpu/mcf5445x/start.Sandinclude/
-include/configs/M54418TWR.hReplace the references with
CONFIG_SYS_TEXT_BASEand deleteboard/freescale/m54418twr/config.mk.Signed-off-by Masahiro Yamada <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160120/e4d0cf84/attachment.sig>
PATCH 3/8 microblaze: move CONFIG_SYS_TEXT_BASE to defconfig
In reply to Masahiro YamadaThis is how CONFIG options are defined by Kconfig.
Signed-off-by Masahiro Yamada <[email protected]>
---
Kconfig | 2 +- board/xilinx/microblaze-generic/config.mk | 2 -- configs/microblaze-generic_defconfig | 1 + 3 files changed, 2 insertions(+), 3 deletions(-)
Kconfig +1 -1
@@ -209,7 +209,7 @@ config SYS_EXTRA_OPTIONS config SYS_TEXT_BASE depends on SPARC || ARC || X86 || ARCH_UNIPHIER || ARCH_ZYNQMP || \ - (M68K && !TARGET_ASTRO_MCF5373L) + (M68K && !TARGET_ASTRO_MCF5373L) || MICROBLAZE depends on !EFI_APP hex "Text Base" help
board/xilinx/microblaze-generic/config.mk +0 -2
@@ -11,8 +11,6 @@ # the generated file from your Xilinx design flow. # -CONFIG_SYS_TEXT_BASE = 0x29000000 - PLATFORM_CPPFLAGS += -mno-xl-soft-mul PLATFORM_CPPFLAGS += -mno-xl-soft-div PLATFORM_CPPFLAGS += -mxl-barrel-shift
configs/microblaze-generic_defconfig +1 -0
@@ -1,5 +1,6 @@ CONFIG_MICROBLAZE=y CONFIG_TARGET_MICROBLAZE_GENERIC=y +CONFIG_SYS_TEXT_BASE=0x29000000 CONFIG_DEFAULT_DEVICE_TREE="microblaze-generic" CONFIG_SPL=y CONFIG_SYS_PROMPT="U-Boot-mONStR> "
Signature · 1 line
1.9.1
PATCH 3/8 microblaze: move CONFIG_SYS_TEXT_BASE to defconfig
Quoted 42 lines · Masahiro Yamada
This is how CONFIG options are defined by
Kconfig.Signed-off-by Masahiro Yamada <[email protected]>---
Kconfig | 2 +- board/xilinx/microblaze-generic/config.mk | 2 -- configs/microblaze-generic_defconfig | 1 + 3 files changed, 2 insertions(+), 3 deletions(-)Kconfig +1
-1@@ -209,7 +209,7 @@ config SYS_EXTRA_OPTIONS config SYS_TEXT_BASE depends on SPARC || ARC || X86 || ARCH_UNIPHIER || ARCH_ZYNQMP || \ - (M68K && !TARGET_ASTRO_MCF5373L) + (M68K && !TARGET_ASTRO_MCF5373L) || MICROBLAZE depends on !EFI_APP hex "Text Base" helpboard/xilinx/microblaze-generic/config.mk +0
-2@@ -11,8 +11,6 @@ # the generated file from your Xilinx design flow. # -CONFIG_SYS_TEXT_BASE = 0x29000000 - PLATFORM_CPPFLAGS += -mno-xl-soft-mul PLATFORM_CPPFLAGS += -mno-xl-soft-div PLATFORM_CPPFLAGS += -mxl-barrel-shiftconfigs/microblaze-generic_defconfig +0
-0
configs/microblaze-generic_defconfig line 6
Quoted 6 lines
configs/microblaze-generic_defconfig +1
-0@@ -1,5 +1,6 @@ CONFIG_MICROBLAZE=y CONFIG_TARGET_MICROBLAZE_GENERIC=y +CONFIG_SYS_TEXT_BASE=0x29000000 CONFIG_DEFAULT_DEVICE_TREE="microblaze-generic" CONFIG_SPL=y CONFIG_SYS_PROMPT="U-Boot-mONStR> "
I have made the same patch recently but you were first that's why.
Acked-by Michal Simek <[email protected]>
Thanks,
Michal
Signature · 14 lines
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91 w: www.monstr.eu p: +42-0-721842854 Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/ Maintainer of Linux kernel - Xilinx Zynq ARM architecture Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 181 bytes Desc: OpenPGP digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20151211/34a0a60a/attachment.sig>
PATCH 3/8 microblaze: move CONFIG_SYS_TEXT_BASE to defconfig
In reply to Masahiro YamadaQuoted 4 lines · Masahiro Yamada
This is how CONFIG options are defined by
Kconfig.Signed-off-by Masahiro Yamada <[email protected]>Acked-by Michal Simek <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160120/3b17b4a1/attachment.sig>
PATCH 4/8 mips: vct: move CONFIG_SYS_TEXT_BASE away from config.mk
In reply to Masahiro YamadaWe can delete board/micronas/vct/config.mk by moving the define of CONFIG_SYS_TEXT_BASE to somewhere else. Other MIPS boards are still defining it in include/config/${BOARD}.h, so I am following that way here.
Signed-off-by Masahiro Yamada <[email protected]>
---
board/micronas/vct/config.mk | 13 ------------- include/configs/vct.h | 1 + 2 files changed, 1 insertion(+), 13 deletions(-) delete mode 100644 board/micronas/vct/config.mk
board/micronas/vct/config.mk deleted +0 -13
@@ -1,13 +0,0 @@ -# -# (C) Copyright 2008 Stefan Roese <[email protected]>, DENX Software Engineering -# -# SPDX-License-Identifier: GPL-2.0+ -# - -# -# vct_xxx boards with MIPS 4Kc CPU core -# - -ifndef CONFIG_SYS_TEXT_BASE -CONFIG_SYS_TEXT_BASE = 0x87000000 -endif
include/configs/vct.h +1 -0
@@ -32,6 +32,7 @@#define CONFIG_SKIP_LOWLEVEL_INIT /* SDRAM is initialized by the bootstrap code */ +#define CONFIG_SYS_TEXT_BASE 0x87000000#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE#define CONFIG_SYS_MONITOR_LEN (256 << 10)#define CONFIG_SYS_MALLOC_LEN (1 << 20)
Signature · 1 line
1.9.1
PATCH 4/8 mips: vct: move CONFIG_SYS_TEXT_BASE away from config.mk
Am 11.12.2015 um 04:22 schrieb Masahiro Yamada:
Quoted 24 lines
We can delete
board/micronas/vct/config.mkby moving the define ofCONFIG_SYS_TEXT_BASEto somewhere else. Other MIPS boards are still defining it ininclude/config/${BOARD}.h, so I am following that way here.Signed-off-by Masahiro Yamada <[email protected]> ---
board/micronas/vct/config.mk| 13 -------------include/configs/vct.h| 1 + 2 files changed, 1
insertion(+), 13 deletions(-) delete mode 100644board/micronas/vct/config.mk(quoted diff) +0
-0
b/board/micronas/vct/config.mkdeleted file mode 100644 index 354d918..0000000 ---a/board/micronas/vct/config.mk+++/dev/null(quoted diff) +0
-0@@ -1,13 +0,0 @@ -# -# (C) Copyright 2008 Stefan Roese<[email protected]>, DENX Software Engineering -# -#
SPDX-License-Identifier: GPL-2.0+ -# - -# -#vct_xxxboards with
MIPS 4Kc CPU core -# - -ifndefCONFIG_SYS_TEXT_BASE-CONFIG_SYS_TEXT_BASE =0x87000000-endif diff --gita/include/configs/vct.hb/include/configs/vct.hindex 872f2f0..ea6e3c0 100644 ---a/include/configs/vct.h+++b/include/configs/vct.h@@ -32,6 +32,7 @@
Quoted 8 lines
#define
CONFIG_SKIP_LOWLEVEL_INIT/* SDRAM is initialized by the
bootstrap code */+#define
CONFIG_SYS_TEXT_BASE0x87000000#defineCONFIG_SYS_MONITOR_BASECONFIG_SYS_TEXT_BASE#defineCONFIG_SYS_MONITOR_LEN(256 << 10) #defineCONFIG_SYS_MALLOC_LEN
(1 << 20)
Signature · 1 line
- Daniel
PATCH 4/8 mips: vct: move CONFIG_SYS_TEXT_BASE away from config.mk
In reply to Masahiro YamadaQuoted 7 lines · Masahiro Yamada
We can delete
board/micronas/vct/config.mkby moving the define ofCONFIG_SYS_TEXT_BASEto somewhere else. Other MIPS boards are still defining it ininclude/config/${BOARD}.h, so I am following that way here.Signed-off-by Masahiro Yamada <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160120/840f5084/attachment.sig>
PATCH 5/8 mips: dbau1x00: move CONFIG_SYS_TEXT_BASE away from config.mk
In reply to Masahiro YamadaWe can delete board/dbau1x00/config.mk by moving the define of CONFIG_SYS_TEXT_BASE to somewhere else. Other MIPS boards are still defining it in include/config/${BOARD}.h, so I am following that way here.
Signed-off-by Masahiro Yamada <[email protected]>
---
board/dbau1x00/config.mk | 16 ---------------- include/configs/dbau1x00.h | 5 +++++ 2 files changed, 5 insertions(+), 16 deletions(-) delete mode 100644 board/dbau1x00/config.mk
board/dbau1x00/config.mk deleted +0 -16
@@ -1,16 +0,0 @@ -# -# (C) Copyright 2003 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -# -# AMD development board AMD Alchemy DbAu1x00, MIPS32 core -# - -# ROM version -CONFIG_SYS_TEXT_BASE = 0xbfc00000 - -# RAM version -#CONFIG_SYS_TEXT_BASE = 0x80100000
include/configs/dbau1x00.h +5 -0
@@ -147,6 +147,11 @@#define CONFIG_FLASH_CFI_DRIVER 1/* The following #defines are needed to get flash environment right */ +/* ROM version */ +#define CONFIG_SYS_TEXT_BASE 0xbfc00000 +/* RAM version */ +/* #define CONFIG_SYS_TEXT_BASE 0x80100000 */ +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE#define CONFIG_SYS_MONITOR_LEN (192 << 10)
Signature · 1 line
1.9.1
PATCH 5/8 mips: dbau1x00: move CONFIG_SYS_TEXT_BASE away from config.mk
Am 11.12.2015 um 04:22 schrieb Masahiro Yamada:
Quoted 42 lines
We can delete
board/dbau1x00/config.mkby moving the define ofCONFIG_SYS_TEXT_BASEto somewhere else. Other MIPS boards are still defining it ininclude/config/${BOARD}.h, so I am following that way here.Signed-off-by Masahiro Yamada <[email protected]>---
board/dbau1x00/config.mk | 16 ---------------- include/configs/dbau1x00.h | 5 +++++ 2 files changed, 5 insertions(+), 16 deletions(-) delete mode 100644 board/dbau1x00/config.mkboard/dbau1x00/config.mk deleted +0
-16@@ -1,16 +0,0 @@ -# -# (C) Copyright 2003 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -# -# AMD development board AMD Alchemy DbAu1x00, MIPS32 core -# - -# ROM version -CONFIG_SYS_TEXT_BASE = 0xbfc00000 - -# RAM version -#CONFIG_SYS_TEXT_BASE = 0x80100000include/configs/dbau1x00.h +0
-0@@ -147,6 +147,11 @@#define CONFIG_FLASH_CFI_DRIVER 1
include/configs/dbau1x00.h line 157
Quoted 10 lines
include/configs/dbau1x00.h +5
-0/* The following #defines are needed to get flash environment right */ +/* ROM version */ +#define CONFIG_SYS_TEXT_BASE 0xbfc00000 +/* RAM version */ +/* #define CONFIG_SYS_TEXT_BASE 0x80100000 */ +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE#define CONFIG_SYS_MONITOR_LEN (192 << 10)
Signature · 1 line
- Daniel
PATCH 5/8 mips: dbau1x00: move CONFIG_SYS_TEXT_BASE away from config.mk
In reply to Masahiro YamadaQuoted 7 lines · Masahiro Yamada
We can delete
board/dbau1x00/config.mkby moving the define ofCONFIG_SYS_TEXT_BASEto somewhere else. Other MIPS boards are still defining it ininclude/config/${BOARD}.h, so I am following that way here.Signed-off-by Masahiro Yamada <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160120/10c479d1/attachment.sig>
PATCH 6/8 mips: pb1x00: move CONFIG_SYS_TEXT_BASE away from config.mk
In reply to Masahiro YamadaWe can delete board/pb1x00/config.mk by moving the define of CONFIG_SYS_TEXT_BASE to somewhere else. Other MIPS boards are still defining it in include/config/${BOARD}.h, so I am following that way here.
Signed-off-by Masahiro Yamada <[email protected]>
---
board/pb1x00/config.mk | 16 ---------------- include/configs/pb1x00.h | 5 +++++ 2 files changed, 5 insertions(+), 16 deletions(-) delete mode 100644 board/pb1x00/config.mk
board/pb1x00/config.mk deleted +0 -16
@@ -1,16 +0,0 @@ -# -# (C) Copyright 2003 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -# -# AMD development board AMD Alchemy Pb1x00, MIPS32 core -# - -# ROM version -#CONFIG_SYS_TEXT_BASE = 0xbfc00000 - -# SDRAM version -CONFIG_SYS_TEXT_BASE = 0x83800000
include/configs/pb1x00.h +5 -0
@@ -81,6 +81,11 @@#define PHYS_FLASH_2 0xbfc00000/* Flash Bank #2 */ /* The following #defines are needed to get flash environment right */ +/* ROM version */ +/* #define CONFIG_SYS_TEXT_BASE 0xbfc00000 */ +/* SDRAM version */ +#define CONFIG_SYS_TEXT_BASE 0x83800000 +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE#define CONFIG_SYS_MONITOR_LEN (192 << 10)
Signature · 1 line
1.9.1
PATCH 6/8 mips: pb1x00: move CONFIG_SYS_TEXT_BASE away from config.mk
Am 11.12.2015 um 04:22 schrieb Masahiro Yamada:
Quoted 42 lines
We can delete
board/pb1x00/config.mkby moving the define ofCONFIG_SYS_TEXT_BASEto somewhere else. Other MIPS boards are still defining it ininclude/config/${BOARD}.h, so I am following that way here.Signed-off-by Masahiro Yamada <[email protected]>---
board/pb1x00/config.mk | 16 ---------------- include/configs/pb1x00.h | 5 +++++ 2 files changed, 5 insertions(+), 16 deletions(-) delete mode 100644 board/pb1x00/config.mkboard/pb1x00/config.mk deleted +0
-16@@ -1,16 +0,0 @@ -# -# (C) Copyright 2003 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -# -# AMD development board AMD Alchemy Pb1x00, MIPS32 core -# - -# ROM version -#CONFIG_SYS_TEXT_BASE = 0xbfc00000 - -# SDRAM version -CONFIG_SYS_TEXT_BASE = 0x83800000include/configs/pb1x00.h +0
-0@@ -81,6 +81,11 @@#define PHYS_FLASH_2 0xbfc00000/* Flash Bank #2 */
include/configs/pb1x00.h line 91
Quoted 10 lines
include/configs/pb1x00.h +5
-0/* The following #defines are needed to get flash environment right */ +/* ROM version */ +/* #define CONFIG_SYS_TEXT_BASE 0xbfc00000 */ +/* SDRAM version */ +#define CONFIG_SYS_TEXT_BASE 0x83800000 +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE#define CONFIG_SYS_MONITOR_LEN (192 << 10)
Signature · 1 line
- Daniel
PATCH 6/8 mips: pb1x00: move CONFIG_SYS_TEXT_BASE away from config.mk
In reply to Masahiro YamadaQuoted 7 lines · Masahiro Yamada
We can delete
board/pb1x00/config.mkby moving the define ofCONFIG_SYS_TEXT_BASEto somewhere else. Other MIPS boards are still defining it ininclude/config/${BOARD}.h, so I am following that way here.Signed-off-by Masahiro Yamada <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160120/50a12e40/attachment.sig>
PATCH 7/8 powerpc: yucca: drop redundant CONFIG_SYS_TEXT_BASE from config.mk
In reply to Masahiro YamadaThe include/configs/yucca.h already has the same define:
#define CONFIG_SYS_TEXT_BASE 0xfffb0000
Remove the redundant one from board/amcc/yucca/config.mk.
Signed-off-by Masahiro Yamada <[email protected]>
---
board/amcc/yucca/config.mk | 6 ------ 1 file changed, 6 deletions(-)
board/amcc/yucca/config.mk +0 -6
@@ -9,12 +9,6 @@ # AMCC 440SPe Reference Platform (yucca) board # -ifeq ($(ramsym),1) -CONFIG_SYS_TEXT_BASE = 0x07FD0000 -else -CONFIG_SYS_TEXT_BASE = 0xfffb0000 -endif - PLATFORM_CPPFLAGS += -DCONFIG_440=1 ifeq ($(debug),1)
Signature · 1 line
1.9.1
PATCH 7/8 powerpc: yucca: drop redundant CONFIG_SYS_TEXT_BASE from config.mk
Quoted 19 lines · Masahiro Yamada
The
include/configs/yucca.halready has the same define:#define CONFIG_SYS_TEXT_BASE 0xfffb0000Remove the redundant one from
board/amcc/yucca/config.mk.Signed-off-by Masahiro Yamada <[email protected]>---
board/amcc/yucca/config.mk | 6 ------ 1 file changed, 6 deletions(-)board/amcc/yucca/config.mk +0
-0@@ -9,12 +9,6 @@ # AMCC 440SPe Reference Platform (yucca) board #
board/amcc/yucca/config.mk line 14
Quoted 10 lines
board/amcc/yucca/config.mk +0
-6-ifeq ($(ramsym),1) -CONFIG_SYS_TEXT_BASE = 0x07FD0000 -else -CONFIG_SYS_TEXT_BASE = 0xfffb0000 -endif - PLATFORM_CPPFLAGS += -DCONFIG_440=1 ifeq ($(debug),1)
Acked-by Stefan Roese <[email protected]>
Thanks,
Stefan
PATCH 7/8 powerpc: yucca: drop redundant CONFIG_SYS_TEXT_BASE from config.mk
In reply to Masahiro YamadaQuoted 7 lines · Masahiro Yamada
The
include/configs/yucca.halready has the same define:#define CONFIG_SYS_TEXT_BASE 0xfffb0000Remove the redundant one from
board/amcc/yucca/config.mk.Signed-off-by Masahiro Yamada <[email protected]>Acked-by Stefan Roese <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160120/002fd53f/attachment.sig>
PATCH 8/8 kbuild: drop workaround for old style CONFIG_SYS_TEXT_BASE defines
In reply to Masahiro YamadaNow, there is no board defining CONFIG_SYS_TEXT_BASE by its config.mk, so this workaround is no longer needed.
Signed-off-by Masahiro Yamada <[email protected]>
---
Makefile | 6 ------ 1 file changed, 6 deletions(-)
Makefile +0 -6
@@ -591,12 +591,6 @@ endif # Prohibit date/time macros, which would make the build non-deterministic KBUILD_CFLAGS += $(call cc-option,-Werror=date-time) -ifneq ($(CONFIG_SYS_TEXT_BASE),) -KBUILD_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) -endif - -export CONFIG_SYS_TEXT_BASE - include scripts/Makefile.extrawarn # Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments
Signature · 1 line
1.9.1
PATCH 8/8 kbuild: drop workaround for old style CONFIG_SYS_TEXT_BASE defines
Quoted 17 lines · Masahiro Yamada
Now, there is no board defining
CONFIG_SYS_TEXT_BASEby its config.mk, so this workaround is no longer needed.Signed-off-by Masahiro Yamada <[email protected]>---
Makefile | 6 ------ 1 file changed, 6 deletions(-)Makefile +0
-0@@ -591,12 +591,6 @@ endif # Prohibit date/time macros, which would make the build non-deterministic KBUILD_CFLAGS += $(call cc-option,-Werror=date-time)
Makefile endif · line 596
Quoted 10 lines
Makefile +0
-6-ifneq ($(CONFIG_SYS_TEXT_BASE),) -KBUILD_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) -endif - -export CONFIG_SYS_TEXT_BASE - include scripts/Makefile.extrawarn # Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments
Acked-by Stefan Roese <[email protected]>
Thanks,
Stefan
PATCH 8/8 kbuild: drop workaround for old style CONFIG_SYS_TEXT_BASE defines
In reply to Masahiro YamadaQuoted 5 lines · Masahiro Yamada
Now, there is no board defining
CONFIG_SYS_TEXT_BASEby its config.mk, so this workaround is no longer needed.Signed-off-by Masahiro Yamada <[email protected]>Acked-by Stefan Roese <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160120/cb61fe87/attachment.sig>
cover m68k, mips, powerpc, kbuild: move CONFIG_SYS_TEXT_BASE
In reply to Masahiro YamadaQuoted 118 lines · Masahiro Yamada
Currently,
CONFIG_SYS_TEXT_BASEis defined in various ways:[1] by
board/${VENDOR}/${BOARD}/config.mk[2] by
CONFIG_SYS_EXTRA_OPTIONS
(This was "options" field of boards.cfg beforeKconfigconversion)[3] by
include/configs/${BOARD}.h[4] by configs/${BOARD}_defconfig
Kbuildis still keeping some tricky code for [1]. We have some boards using [1] for M68K, MIPS, PowerPC.Convert them and drop the workaround code from
Kbuild.I built all the boards and compared the checksum of the binary images for all of them.
I confirmed no impact on these moves. This series should be OK.Masahiro Yamada (8):
m68k: moveCONFIG_SYS_TEXT_BASEto defconfig files
m68k: M54418TWR: dropboard/freescale/m54418twr/config.mk
microblaze: moveCONFIG_SYS_TEXT_BASEto defconfig
mips: vct: moveCONFIG_SYS_TEXT_BASEaway from config.mk
mips: dbau1x00: moveCONFIG_SYS_TEXT_BASEaway from config.mk
mips: pb1x00: moveCONFIG_SYS_TEXT_BASEaway from config.mk
powerpc: yucca: drop redundantCONFIG_SYS_TEXT_BASEfrom config.mk
kbuild: drop workaround for old styleCONFIG_SYS_TEXT_BASEdefinesKconfig | 3 ++- Makefile | 6 ------ arch/m68k/cpu/mcf5445x/start.S | 8 ++++---- board/amcc/yucca/config.mk | 6 ------ board/cobra5272/config.mk | 9 --------- board/dbau1x00/config.mk | 16 ---------------- board/freescale/m5208evbe/config.mk | 9 --------- board/freescale/m5249evb/config.mk | 9 --------- board/freescale/m5253demo/config.mk | 9 --------- board/freescale/m5253evbe/config.mk | 9 --------- board/freescale/m5272c3/config.mk | 9 --------- board/freescale/m5275evb/config.mk | 9 --------- board/freescale/m5282evb/config.mk | 9 --------- board/freescale/m53017evb/config.mk | 9 --------- board/freescale/m5329evb/config.mk | 9 --------- board/freescale/m5373evb/config.mk | 9 --------- board/freescale/m54418twr/config.mk | 7 ------- board/freescale/m547xevb/config.mk | 9 --------- board/freescale/m548xevb/config.mk | 9 --------- board/micronas/vct/config.mk | 13 ------------- board/pb1x00/config.mk | 16 ---------------- board/sysam/amcore/config.mk | 7 ------- board/xilinx/microblaze-generic/config.mk | 2 -- configs/M5208EVBE_defconfig | 1 + configs/M52277EVB_defconfig | 3 ++- configs/M52277EVB_stmicro_defconfig | 3 ++- configs/M5235EVB_Flash32_defconfig | 3 ++- configs/M5235EVB_defconfig | 2 +- configs/M5249EVB_defconfig | 1 + configs/M5253DEMO_defconfig | 1 + configs/M5253EVBE_defconfig | 1 + configs/M5272C3_defconfig | 1 + configs/M5275EVB_defconfig | 1 + configs/M5282EVB_defconfig | 1 + configs/M53017EVB_defconfig | 1 + configs/M5329AFEE_defconfig | 1 + configs/M5329BFEE_defconfig | 1 + configs/M5373EVB_defconfig | 1 + configs/M54418TWR_defconfig | 3 ++- configs/M54418TWR_nand_mii_defconfig | 3 ++- configs/M54418TWR_nand_rmii_defconfig | 3 ++- configs/M54418TWR_nand_rmii_lowfreq_defconfig | 3 ++- configs/M54418TWR_serial_mii_defconfig | 3 ++- configs/M54418TWR_serial_rmii_defconfig | 3 ++- configs/M54451EVB_defconfig | 3 ++- configs/M54451EVB_stmicro_defconfig | 3 ++- configs/M54455EVB_a66_defconfig | 3 ++- configs/M54455EVB_defconfig | 3 ++- configs/M54455EVB_i66_defconfig | 3 ++- configs/M54455EVB_intel_defconfig | 3 ++- configs/M54455EVB_stm33_defconfig | 3 ++- configs/M5475AFE_defconfig | 1 + configs/M5475BFE_defconfig | 1 + configs/M5475CFE_defconfig | 1 + configs/M5475DFE_defconfig | 1 + configs/M5475EFE_defconfig | 1 + configs/M5475FFE_defconfig | 1 + configs/M5475GFE_defconfig | 1 + configs/M5485AFE_defconfig | 1 + configs/M5485BFE_defconfig | 1 + configs/M5485CFE_defconfig | 1 + configs/M5485DFE_defconfig | 1 + configs/M5485EFE_defconfig | 1 + configs/M5485FFE_defconfig | 1 + configs/M5485GFE_defconfig | 1 + configs/M5485HFE_defconfig | 1 + configs/amcore_defconfig | 1 + configs/cobra5272_defconfig | 1 + configs/eb_cpu5282_defconfig | 3 ++- configs/eb_cpu5282_internal_defconfig | 3 ++- configs/microblaze-generic_defconfig | 1 + include/configs/M54418TWR.h | 2 +- include/configs/dbau1x00.h | 5 +++++ include/configs/pb1x00.h | 5 +++++ include/configs/vct.h | 1 + 75 files changed, 84 insertions(+), 215 deletions(-)delete mode 100644
board/cobra5272/config.mkdelete mode 100644board/dbau1x00/config.mkdelete mode 100644board/freescale/m5208evbe/config.mkdelete mode 100644board/freescale/m5249evb/config.mkdelete mode 100644board/freescale/m5253demo/config.mkdelete mode 100644board/freescale/m5253evbe/config.mkdelete mode 100644board/freescale/m5272c3/config.mkdelete mode 100644board/freescale/m5275evb/config.mkdelete mode 100644board/freescale/m5282evb/config.mkdelete mode 100644board/freescale/m53017evb/config.mk
Quoted 9 lines
delete mode 100644
board/freescale/m5329evb/config.mkdelete mode 100644board/freescale/m5373evb/config.mkdelete mode 100644board/freescale/m54418twr/config.mkdelete mode 100644board/freescale/m547xevb/config.mkdelete mode 100644board/freescale/m548xevb/config.mkdelete mode 100644board/micronas/vct/config.mkdelete mode 100644board/pb1x00/config.mkdelete mode 100644board/sysam/amcore/config.mk
cover m68k, mips, powerpc, kbuild: move CONFIG_SYS_TEXT_BASE
In reply to Masahiro YamadaQuoted 118 lines · Masahiro Yamada
Currently,
CONFIG_SYS_TEXT_BASEis defined in various ways:[1] by
board/${VENDOR}/${BOARD}/config.mk[2] by
CONFIG_SYS_EXTRA_OPTIONS
(This was "options" field of boards.cfg beforeKconfigconversion)[3] by
include/configs/${BOARD}.h[4] by configs/${BOARD}_defconfig
Kbuildis still keeping some tricky code for [1]. We have some boards using [1] for M68K, MIPS, PowerPC.Convert them and drop the workaround code from
Kbuild.I built all the boards and compared the checksum of the binary images for all of them.
I confirmed no impact on these moves. This series should be OK.Masahiro Yamada (8):
m68k: moveCONFIG_SYS_TEXT_BASEto defconfig files
m68k: M54418TWR: dropboard/freescale/m54418twr/config.mk
microblaze: moveCONFIG_SYS_TEXT_BASEto defconfig
mips: vct: moveCONFIG_SYS_TEXT_BASEaway from config.mk
mips: dbau1x00: moveCONFIG_SYS_TEXT_BASEaway from config.mk
mips: pb1x00: moveCONFIG_SYS_TEXT_BASEaway from config.mk
powerpc: yucca: drop redundantCONFIG_SYS_TEXT_BASEfrom config.mk
kbuild: drop workaround for old styleCONFIG_SYS_TEXT_BASEdefinesKconfig | 3 ++- Makefile | 6 ------ arch/m68k/cpu/mcf5445x/start.S | 8 ++++---- board/amcc/yucca/config.mk | 6 ------ board/cobra5272/config.mk | 9 --------- board/dbau1x00/config.mk | 16 ---------------- board/freescale/m5208evbe/config.mk | 9 --------- board/freescale/m5249evb/config.mk | 9 --------- board/freescale/m5253demo/config.mk | 9 --------- board/freescale/m5253evbe/config.mk | 9 --------- board/freescale/m5272c3/config.mk | 9 --------- board/freescale/m5275evb/config.mk | 9 --------- board/freescale/m5282evb/config.mk | 9 --------- board/freescale/m53017evb/config.mk | 9 --------- board/freescale/m5329evb/config.mk | 9 --------- board/freescale/m5373evb/config.mk | 9 --------- board/freescale/m54418twr/config.mk | 7 ------- board/freescale/m547xevb/config.mk | 9 --------- board/freescale/m548xevb/config.mk | 9 --------- board/micronas/vct/config.mk | 13 ------------- board/pb1x00/config.mk | 16 ---------------- board/sysam/amcore/config.mk | 7 ------- board/xilinx/microblaze-generic/config.mk | 2 -- configs/M5208EVBE_defconfig | 1 + configs/M52277EVB_defconfig | 3 ++- configs/M52277EVB_stmicro_defconfig | 3 ++- configs/M5235EVB_Flash32_defconfig | 3 ++- configs/M5235EVB_defconfig | 2 +- configs/M5249EVB_defconfig | 1 + configs/M5253DEMO_defconfig | 1 + configs/M5253EVBE_defconfig | 1 + configs/M5272C3_defconfig | 1 + configs/M5275EVB_defconfig | 1 + configs/M5282EVB_defconfig | 1 + configs/M53017EVB_defconfig | 1 + configs/M5329AFEE_defconfig | 1 + configs/M5329BFEE_defconfig | 1 + configs/M5373EVB_defconfig | 1 + configs/M54418TWR_defconfig | 3 ++- configs/M54418TWR_nand_mii_defconfig | 3 ++- configs/M54418TWR_nand_rmii_defconfig | 3 ++- configs/M54418TWR_nand_rmii_lowfreq_defconfig | 3 ++- configs/M54418TWR_serial_mii_defconfig | 3 ++- configs/M54418TWR_serial_rmii_defconfig | 3 ++- configs/M54451EVB_defconfig | 3 ++- configs/M54451EVB_stmicro_defconfig | 3 ++- configs/M54455EVB_a66_defconfig | 3 ++- configs/M54455EVB_defconfig | 3 ++- configs/M54455EVB_i66_defconfig | 3 ++- configs/M54455EVB_intel_defconfig | 3 ++- configs/M54455EVB_stm33_defconfig | 3 ++- configs/M5475AFE_defconfig | 1 + configs/M5475BFE_defconfig | 1 + configs/M5475CFE_defconfig | 1 + configs/M5475DFE_defconfig | 1 + configs/M5475EFE_defconfig | 1 + configs/M5475FFE_defconfig | 1 + configs/M5475GFE_defconfig | 1 + configs/M5485AFE_defconfig | 1 + configs/M5485BFE_defconfig | 1 + configs/M5485CFE_defconfig | 1 + configs/M5485DFE_defconfig | 1 + configs/M5485EFE_defconfig | 1 + configs/M5485FFE_defconfig | 1 + configs/M5485GFE_defconfig | 1 + configs/M5485HFE_defconfig | 1 + configs/amcore_defconfig | 1 + configs/cobra5272_defconfig | 1 + configs/eb_cpu5282_defconfig | 3 ++- configs/eb_cpu5282_internal_defconfig | 3 ++- configs/microblaze-generic_defconfig | 1 + include/configs/M54418TWR.h | 2 +- include/configs/dbau1x00.h | 5 +++++ include/configs/pb1x00.h | 5 +++++ include/configs/vct.h | 1 + 75 files changed, 84 insertions(+), 215 deletions(-)delete mode 100644
board/cobra5272/config.mkdelete mode 100644board/dbau1x00/config.mkdelete mode 100644board/freescale/m5208evbe/config.mkdelete mode 100644board/freescale/m5249evb/config.mkdelete mode 100644board/freescale/m5253demo/config.mkdelete mode 100644board/freescale/m5253evbe/config.mkdelete mode 100644board/freescale/m5272c3/config.mkdelete mode 100644board/freescale/m5275evb/config.mkdelete mode 100644board/freescale/m5282evb/config.mkdelete mode 100644board/freescale/m53017evb/config.mk
Quoted 9 lines
delete mode 100644
board/freescale/m5329evb/config.mkdelete mode 100644board/freescale/m5373evb/config.mkdelete mode 100644board/freescale/m54418twr/config.mkdelete mode 100644board/freescale/m547xevb/config.mkdelete mode 100644board/freescale/m548xevb/config.mkdelete mode 100644board/micronas/vct/config.mkdelete mode 100644board/pb1x00/config.mkdelete mode 100644board/sysam/amcore/config.mk