watchdog: force to stop the watchdog when unregister
PATCH 1/1 watchdog: force to stop the watchdog when unregister
From: Li RongQing <[email protected]>
force to stop the watchdog when unregister, otherwise the watchdog maybe be suspended and be run after the module is unloaded, like the below:
$modprobe softdog
$echo 1 >/dev/watchdog
$modprobe -r softdog
CPU 20 Unable to handle kernel paging request at virtual address Oops[#1]:
CPU: 20 PID: 0 Comm: swapper/20 Not tainted 4.1.13-WR8.0.0.0_standard #6 ... Modules linked in: [last unloaded: softdog] .... Call Trace: [<ffffffff801e142c>] cascade+0x34/0xb0 [<ffffffff801e1964>] run_timer_softirq+0x30c/0x368 [<ffffffff80181044>] __do_softirq+0x1ec/0x418 [<ffffffff801815d0>] irq_exit+0x90/0x98 [<ffffffff8010749c>] plat_irq_dispatch+0xa4/0x140 [<ffffffff80152740>] ret_from_irq+0x0/0x4 [<ffffffff801529e0>] __r4k_wait+0x20/0x40 [<ffffffff801c2278>] cpu_startup_entry+0x2a0/0x368 [<ffffffff8015fa64>] start_secondary+0x444/0x4d8
--- drivers/watchdog/watchdog_dev.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/watchdog/watchdog_dev.c +2 -0
@@ -569,6 +569,8 @@ int watchdog_dev_register(struct watchdog_device *wdd)int watchdog_dev_unregister (struct watchdog_device *wdd) { +watchdog_stop (wdd); +mutex_lock (&wdd->lock);set_bit (WDOG_UNREGISTERED , &wdd->status);mutex_unlock (&wdd->lock);
Signature · 1 line
2.1.4
Guenter Roeck
maintainerQuoted 25 lines · On 12/17/2015 12:57 AM, [email protected] wrote:
From: Li RongQing <[email protected]>
force to stop the watchdog when unregister, otherwise the watchdog maybe be suspended and be run after the module is unloaded, like the below:
$modprobe softdog $echo 1 >/dev/watchdog $modprobe -r softdog CPU 20 Unable to handle kernel paging request at virtual address Oops[#1]: CPU: 20 PID: 0 Comm: swapper/20 Not tainted 4.1.13-WR8.0.0.0_standard #6 ... Modules linked in: [last unloaded: softdog] .... Call Trace: [<ffffffff801e142c>] cascade+0x34/0xb0 [<ffffffff801e1964>] run_timer_softirq+0x30c/0x368 [<ffffffff80181044>] __do_softirq+0x1ec/0x418 [<ffffffff801815d0>] irq_exit+0x90/0x98 [<ffffffff8010749c>] plat_irq_dispatch+0xa4/0x140 [<ffffffff80152740>] ret_from_irq+0x0/0x4 [<ffffffff801529e0>] __r4k_wait+0x20/0x40 [<ffffffff801c2278>] cpu_startup_entry+0x2a0/0x368 [<ffffffff8015fa64>] start_secondary+0x444/0x4d8
Quoted 1 line
Signed-off-by Li RongQing <[email protected]>
Real problem, wrong solution. We can not unconditionally stop all watchdogs in the watchdog core when unregistering a watchdog.
Do you get an error message telling you that the watchdog isn't stopped after the echo command ? There should have been a "watchdog did not stop!" message on the console. This is per design.
The problem here is that the softdog has static variables which are accessed if its timer is still running after the driver is unloaded. This is a problem in the softdog driver, not in the watchdog core.
The softdog driver should refuse to unload while still running. Anything else would defeat the purpose of MAGICCLOSE and the requirement to write the magic character before closing the watchdog.
Thanks,
Guenter
Quoted 18 lines
--- drivers/watchdog/watchdog_dev.c | 2 ++ 1 file changed, 2 insertions(+)drivers/watchdog/watchdog_dev.c +2
-0@@ -569,6 +569,8 @@ int watchdog_dev_register(struct watchdog_device *wdd)int watchdog_dev_unregister (struct watchdog_device *wdd) { +watchdog_stop (wdd); +mutex_lock (&wdd->lock);set_bit (WDOG_UNREGISTERED , &wdd->status);mutex_unlock (&wdd->lock);
Quoted 9 lines · Guenter Roeck
Quoted 1 line
Signed-off-by Li RongQing <[email protected]>Real problem, wrong solution. We can not unconditionally stop all watchdogs in the watchdog core when unregistering a watchdog.
Do you get an error message telling you that the watchdog isn't stopped after the echo command ? There should have been a "watchdog did not stop!" message on the console. This is per design.
Yes, I get "watchdog did not stop!"
Quoted 9 lines
The problem here is that the softdog has static variables which are accessed if its timer is still running after the driver is unloaded. This is a problem
in the softdog driver, not in the watchdog core.The softdog driver should refuse to unload while still running. Anything else would defeat the purpose of MAGICCLOSE and the requirement to write the magic character before closing the watchdog.
Ok, I will resend a patch as you suggested
thanks
-Roy
Quoted 3 lines
Thanks,
Guenter