drivers: net: add Microchip PIC32 ethernet controller driver
PATCH 13/18 drivers: net: add Microchip PIC32 ethernet controller driver
This driver implements MAC and MII layer of PIC32 ethernet controller. This controller is capable of handling 100/10mbps full/half duplex ethernet communication. Network data transfer is handled by internal DMA engine.
Signed-off-by Purna Chandra Mandal <[email protected]>
---
drivers/net/Kconfig | 7 + drivers/net/Makefile | 1 + drivers/net/pic32_eth.c | 648 +++++++++++++++++++++++++++++++++++++++++++++++ drivers/net/pic32_eth.h | 184 ++++++++++++++ drivers/net/pic32_mdio.c | 143 +++++++++++ 5 files changed, 983 insertions(+) create mode 100644 drivers/net/pic32_eth.c create mode 100644 drivers/net/pic32_eth.h create mode 100644 drivers/net/pic32_mdio.c
drivers/net/Kconfig +7 -0
@@ -107,4 +107,11 @@ config ZYNQ_GEM help This MAC is presetn in Xilinx Zynq and ZynqMP SoCs. +config PIC32_ETH + bool "Microchip PIC32 Ethernet Support" + depends on MACH_PIC32 + help + This driver implements 10/100 Mbps Ethernet and MAC layer for + Microchip PIC32 microcontrollers. + endif # NETDEVICES
drivers/net/Makefile +1 -0
@@ -72,3 +72,4 @@ obj-$(CONFIG_FSL_MC_ENET) += fsl-mc/ obj-$(CONFIG_FSL_MC_ENET) += ldpaa_eth/ obj-$(CONFIG_FSL_MEMAC) += fm/memac_phy.o obj-$(CONFIG_VSC9953) += vsc9953.o +obj-$(CONFIG_PIC32_ETH) += pic32_mdio.o pic32_eth.o
drivers/net/pic32_eth.c new file +648 -0
648 lines not on this page · raw message
drivers/net/pic32_eth.h new file +184 -0
184 lines not on this page · raw message
drivers/net/pic32_mdio.c new file +143 -0
143 lines not on this page · raw message
Signature · 1 line
1.8.3.1