Preliminary HDCP code available in my tree
Hi all,
Two years ago Cisco did some work on HDCP support for HDMI receivers and transmitters, but for one reason or another that work was never put into actual use. Rather than letting that work go unnoticed I decided to put it up in my git tree:
http://git.linuxtv.org/hverkuil/media_tree.git/log/?h=hdcp
It's missing documentation, it's tested with HDCP 1.4 only (not 2.2), and it needs some TLC, but it was working at the time. So this could be a good starting point for someone.
If someone decides to work on this, please contact me first.
Regards,
Hans
A message that is not in the archive (sent off-list or not yet received): CAH-u=81eoRTXyog9wekZohajEU21b8nNSH+=S2ppAj3eLAombw@mail.gmail.com
Quoted 16 lines · Jean-Michel Hautbois
Hi Hans,
2015-12-18 9:04 GMT+01:00 Hans Verkuil <[email protected] <mailto:[email protected]>>:
Hi all,
Two years ago Cisco did some work on HDCP support for HDMI receivers and transmitters, but for one reason or another that work was never put into actual use. Rather than letting that work go unnoticed I decided to put it up in my git tree:
http://git.linuxtv.org/hverkuil/media_tree.git/log/?h=hdcp
It's missing documentation, it's tested with HDCP 1.4 only (not 2.2), and it needs some TLC, but it was working at the time. So this could be a good starting point for someone.
Quoted 6 lines
If someone decides to work on this, please contact me first.
I will give it a try soon, as I was about to implement it :). I have an ADV7611 and an ADV7604 so it will be interesting. I will keep you informed.
Well, as they say: timing is everything :-)
Let me know how it goes. I'm sure you'll have questions, just ask me and CC Mikhail (the author of the code).
Regards,
Hans