Skip to contentSkip to conversation

Bluetooth: hci_bcm: Add BCM2E65 ACPI ID

PATCH Superseded Luka Karinja 2 participants 2 messages Dec 18, 2015 – Dec 20, 2015 Bluetooth drivers

v1 of 3 Superseded Latest is v3 →

lore
Share & tools
lore

Luka Karinja

author
#0 lore raw

PATCH 1/1 Bluetooth: hci_bcm: Add BCM2E65 ACPI ID

Add BCM2E65 device in acpi_device_id table. Used on Asus T100TAF.

Signed-off-by Luka Karinja <[email protected]>
---
 drivers/bluetooth/hci_bcm.c | 1 +
 1 file changed, 1 insertion(+)
drivers/bluetooth/hci_bcm.c +1 -0
index 835bfab..372f7bc 100644
@@ -546,6 +546,7 @@ static const struct hci_uart_proto bcm_proto = {
 #ifdef CONFIG_ACPI
 static const struct acpi_device_id bcm_acpi_match[] = {
 	{ "BCM2E39", 0 },
+	{ "BCM2E65", 0 },
 	{ "BCM2E67", 0 },
 	{ },
 };
Signature · 1 line
1.9.1
maintainer
#1 lore raw

Hi Luka,

Quoted 12 lines

Add BCM2E65 device in acpi_device_id table. Used on Asus T100TAF.

Signed-off-by Luka Karinja <[email protected]>

---
drivers/bluetooth/hci_bcm.c | 1 +

1 file changed, 1 insertion(+)
drivers/bluetooth/hci_bcm.c +0 -0
index 835bfab..372f7bc 100644

drivers/bluetooth/hci_bcm.c static const struct hci_uart_proto bcm_proto = { · line 551

Quoted 6 lines
drivers/bluetooth/hci_bcm.c +1 -0
@@ -546,6 +546,7 @@ static const struct hci_uart_proto bcm_proto = {
 #ifdef CONFIG_ACPI
 static const struct acpi_device_id bcm_acpi_match[] = {
 	{ "BCM2E39", 0 },
+	{ "BCM2E65", 0 },
 	{ "BCM2E67", 0 },
 	{ },

Applying: Bluetooth: hci_bcm: Add BCM2E65 ACPI ID
error: patch failed: drivers/bluetooth/hci_bcm.c:546
error: drivers/bluetooth/hci_bcm.c: patch does not apply Patch failed at 0001 Bluetooth: hci_bcm: Add BCM2E65 ACPI ID

Please make sure that patch applies cleanly against bluetooth-next tree.

Regards

Marcel