Skip to contentSkip to conversation

QCA6174 firmware

ath10K John Detter 3 participants 5 messages Jan 13, 2016 – Jan 17, 2016 Qualcomm Atheros ATH10K wireless driver

lore
Share & tools
lore
#0 lore raw

Hello everyone,

I recently bought a laptop (Samsung) that has a Qualcomm Atheros QCA6174 card. I have tried using the firmware from both kvalo's repo and the official linux-firmware repo and neither of them have worked. I am running a fresh Ubuntu 15.10 installation (Linux 4.2.0). I have also tried installing Ubuntu Gnome 15.10 with the mainline kernel build (Linux 4.4.0) and that didn't work either. The laptop I'm using does have a button on the keyboard to enable/disable the wifi and I'm not sure if it's causing an issue or not. I have checked rfkill list and there is neither a hard nor soft block on the wlan. I'm not really sure where to go from here, any help would be much appreciated!

Thanks for your time,

- John

Directory structure when I tried firmware from linux-firmware:

root@Ubuntu-15:/lib/firmware/ath10k/QCA6174/hw3.0# pwd
/lib/firmware/ath10k/QCA6174/hw3.0
root@Ubuntu-15:/lib/firmware/ath10k/QCA6174/hw3.0# ls -al
total 744
drwxr-xr-x 4 root root   4096 Jan 13 07:41 .
drwxr-xr-x 4 root root   4096 Jan 13 07:39 ..
-rw-r--r-- 1 root root   8124 Jan 13 07:38 board.bin
lrwxrwxrwx 1 root root     11 Jan 13 07:41 board-pci-168c:003e:144d:412f.bin -> ./board.bin
-rw-r--r-- 1 root root 733784 Jan 13 07:39 firmware-4.bin
lrwxrwxrwx 1 root root     16 Jan 13 07:40 firmware-5.bin -> ./firmware-4.bin

Directory structure when I tried kvalo's firmware:

root@Ubuntu-15:/lib/firmware/ath10k/QCA6174/hw3.0# pwd
/lib/firmware/ath10k/QCA6174/hw3.0
root@Ubuntu-15:/lib/firmware/ath10k/QCA6174/hw3.0/new# ls -al
total 844
drwxr-xr-x 2 root root   4096 Jan 13 07:31 .
drwxr-xr-x 4 root root   4096 Jan 13 07:41 ..
-rw-r--r-- 1 root root  24692 Jan 13 07:17 board-2.bin
-rw-r--r-- 1 root root   8124 Jan 13 07:17 board.bin
lrwxrwxrwx 1 root root     11 Jan 13 07:17 board-pci-168c:003e:144d:412f.bin -> ./board.bin
-rw-r--r-- 1 root root 733784 Jan 13 07:17 firmware-4.bin_WLAN.RM.2.0-00180-QCARMSWPZ-1
lrwxrwxrwx 1 root root     44 Jan 13 07:18 firmware-5.bin -> firmware-4.bin_WLAN.RM.2.0-00180-QCARMSWPZ-1
-rw-r--r-- 1 root root  79801 Jan 13 07:17 notice.txt_WLAN.RM.2.0-00180-QCARMSWPZ-1

Here is the relevant part of my dmesg log:

jdetter@Ubuntu-15:~$ dmesg | grep ath10
[    6.789911] ath10k_pci 0000:3b:00.0: enabling device (0000 -> 0002)
[    6.791752] ath10k_pci 0000:3b:00.0: pci irq msi-x interrupts 8 irq_mode 0 reset_mode 0
[    7.009504] ath10k_pci 0000:3b:00.0: Direct firmware load for ath10k/cal-pci-0000:3b:00.0.bin failed with error -2
[    9.145690] ath10k_pci 0000:3b:00.0: qca6174 hw3.2 (0x05030000, 0x00340aff, 168c:003e:144d:412f) fw WLAN.RM.2.0-00180-QCARMSWPZ-1 api 5 htt 3.26 wmi 4 cal otp max_sta 32
[    9.145694] ath10k_pci 0000:3b:00.0: debug 0 debugfs 1 tracing 1 dfs 0 testmode 0
[   10.144947] ath10k_pci 0000:3b:00.0: suspend timed out - target pause event never came
[   13.219455] ath10k_pci 0000:3b:00.0 wlp59s0: renamed from wlan0
[   18.479782] ath10k_pci 0000:3b:00.0: failed to enable dynamic BW: -11
[   21.479376] ath10k_pci 0000:3b:00.0: could not suspend target (-11)
[   29.770121] ath10k_pci 0000:3b:00.0: failed to enable dynamic BW: -11
[   32.769665] ath10k_pci 0000:3b:00.0: could not suspend target (-11)

Here is my lspci and lshw output:

jdetter@Ubuntu-15:~$ lspci | grep QCA
3b:00.0 Network controller: Qualcomm Atheros QCA6174 802.11ac Wireless Network Adapter (rev 32)
root@Ubuntu-15:~# lshw
...
        *-pci:2
             description: PCI bridge
             product: Sunrise Point-H PCI Express Root Port #9
             vendor: Intel Corporation
             physical id: 1d
             bus info: pci@0000:00:1d.0
             version: f1
             width: 32 bits
             clock: 33MHz
             capabilities: pci pciexpress msi pm normal_decode 
bus_master cap_list
             configuration: driver=pcieport
             resources: irq:16 memory:ed200000-ed3fffff
           *-network DISABLED
                description: Wireless interface
                product: QCA6174 802.11ac Wireless Network Adapter
                vendor: Qualcomm Atheros
                physical id: 0
                bus info: pci@0000:3b:00.0
                logical name: wlp59s0
                version: 32
                serial: b8:86:87:c7:2d:a9
                width: 64 bits
                clock: 33MHz
                capabilities: pm msi pciexpress bus_master cap_list 
ethernet physical wireless
                configuration: broadcast=yes driver=ath10k_pci 
driverversion=4.2.0-23-generic firmware=WLAN.RM.2.0-00180-QCARMSWPZ-1 latency=0 link=no multicast=yes wireless=IEEE 802.11abgn
                resources: irq:319 memory:ed200000-ed3fffff
...

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k

#1 lore raw
Quoted 64 lines · John Detter

Hello everyone,

I recently bought a laptop (Samsung) that has a Qualcomm Atheros QCA6174 card. I have tried using the firmware from both kvalo's repo and the official linux-firmware repo and neither of them have worked. I am running a fresh Ubuntu 15.10 installation (Linux 4.2.0). I have also tried installing Ubuntu Gnome 15.10 with the mainline kernel build (Linux 4.4.0) and that didn't work either. The laptop I'm using does have a button on the keyboard to enable/disable the wifi and I'm not sure if it's causing an issue or not. I have checked rfkill list and there is neither a hard nor soft block on the wlan. I'm not really sure where to go from here, any help would be much appreciated!

Thanks for your time,

- John

Directory structure when I tried firmware from linux-firmware:

root@Ubuntu-15:/lib/firmware/ath10k/QCA6174/hw3.0# pwd
/lib/firmware/ath10k/QCA6174/hw3.0
root@Ubuntu-15:/lib/firmware/ath10k/QCA6174/hw3.0# ls -al
total 744
drwxr-xr-x 4 root root   4096 Jan 13 07:41 .
drwxr-xr-x 4 root root   4096 Jan 13 07:39 ..
-rw-r--r-- 1 root root   8124 Jan 13 07:38 board.bin
lrwxrwxrwx 1 root root     11 Jan 13 07:41 board-pci-168c:003e:144d:412f.bin
-> ./board.bin
-rw-r--r-- 1 root root 733784 Jan 13 07:39 firmware-4.bin
lrwxrwxrwx 1 root root     16 Jan 13 07:40 firmware-5.bin ->
./firmware-4.bin

Directory structure when I tried kvalo's firmware:

root@Ubuntu-15:/lib/firmware/ath10k/QCA6174/hw3.0# pwd
/lib/firmware/ath10k/QCA6174/hw3.0
root@Ubuntu-15:/lib/firmware/ath10k/QCA6174/hw3.0/new# ls -al
total 844
drwxr-xr-x 2 root root   4096 Jan 13 07:31 .
drwxr-xr-x 4 root root   4096 Jan 13 07:41 ..
(quoted diff) +0 -2
-rw-r--r-- 1 root root  24692 Jan 13 07:17 board-2.bin
-rw-r--r-- 1 root root   8124 Jan 13 07:17 board.bin

lrwxrwxrwx 1 root root 11 Jan 13 07:17 board-pci-168c:003e:144d:412f.bin
-> ./board.bin
-rw-r--r-- 1 root root 733784 Jan 13 07:17
firmware-4.bin_WLAN.RM.2.0-00180-QCARMSWPZ-1
lrwxrwxrwx 1 root root 44 Jan 13 07:18 firmware-5.bin ->
firmware-4.bin_WLAN.RM.2.0-00180-QCARMSWPZ-1
-rw-r--r-- 1 root root 79801 Jan 13 07:17
notice.txt_WLAN.RM.2.0-00180-QCARMSWPZ-1

Here is the relevant part of my dmesg log:

jdetter@Ubuntu-15:~$ dmesg | grep ath10
[    6.789911] ath10k_pci 0000:3b:00.0: enabling device (0000 -> 0002)
[    6.791752] ath10k_pci 0000:3b:00.0: pci irq msi-x interrupts 8 irq_mode
0 reset_mode 0
[    7.009504] ath10k_pci 0000:3b:00.0: Direct firmware load for
ath10k/cal-pci-0000:3b:00.0.bin failed with error -2
[    9.145690] ath10k_pci 0000:3b:00.0: qca6174 hw3.2 (0x05030000,
0x00340aff, 168c:003e:144d:412f) fw WLAN.RM.2.0-00180-QCARMSWPZ-1 api 5 htt
3.26 wmi 4 cal otp max_sta 32
[    9.145694] ath10k_pci 0000:3b:00.0: debug 0 debugfs 1 tracing 1 dfs 0
Quoted 8 lines
testmode 0
[   10.144947] ath10k_pci 0000:3b:00.0: suspend timed out - target pause
event never came
[   13.219455] ath10k_pci 0000:3b:00.0 wlp59s0: renamed from wlan0
[   18.479782] ath10k_pci 0000:3b:00.0: failed to enable dynamic BW: -11
[   21.479376] ath10k_pci 0000:3b:00.0: could not suspend target (-11)
[   29.770121] ath10k_pci 0000:3b:00.0: failed to enable dynamic BW: -11
[   32.769665] ath10k_pci 0000:3b:00.0: could not suspend target (-11)

Firmware command timeouts (-11) suggest that wrong board file was used to boot the device.

The currently available board-2.bin doesn't seem to include your device (168c:003e:144d:412f). You can list them with:

; strings board-2.bin | grep vendor bus=pci,vendor=168c,device=003e,subsystem-vendor=168c,subsystem-device=3361m bus=pci,vendor=168c,device=003e,subsystem-vendor=168c,subsystem-device=3362m bus=pci,vendor=168c,device=003e,subsystem-vendor=168c,subsystem-device=3363m

Was this run on 4.4 or 4.2?

The board-2.bin support was added in 4.4. Prior to this the driver would try to load the board-pci-xxx. files. You can:
a) scream louder and complain to your card vendor and/or qualcomm
b) use pre-4.4 kernel, get windows driver, extract .inf and eeprom
files from it, look for the one that matches your device (168c:003e:144d:412f) and use it as board-pci-168c:003e:144d:412f.bin

Michal

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k

#2 lore raw

Michal,

Thanks for the speedy response! The dmesg, lspci and lshw outputs were generated when running 4.2.0, I didn't know you needed 4.4 in order for it to use board-2.bin. Even if I upgraded back to 4.4 the firmware still wouldn't work right?

Thanks for the help,

- John

Quoted 94 lines · Michal Kazior
Quoted 64 lines · John Detter

Hello everyone,

I recently bought a laptop (Samsung) that has a Qualcomm Atheros QCA6174 card. I have tried using the firmware from both kvalo's repo and the official linux-firmware repo and neither of them have worked. I am running a fresh Ubuntu 15.10 installation (Linux 4.2.0). I have also tried installing Ubuntu Gnome 15.10 with the mainline kernel build (Linux 4.4.0) and that didn't work either. The laptop I'm using does have a button on the keyboard to enable/disable the wifi and I'm not sure if it's causing an issue or not. I have checked rfkill list and there is neither a hard nor soft block on the wlan. I'm not really sure where to go from here, any help would be much appreciated!

Thanks for your time,

- John

Directory structure when I tried firmware from linux-firmware:

root@Ubuntu-15:/lib/firmware/ath10k/QCA6174/hw3.0#  pwd
/lib/firmware/ath10k/QCA6174/hw3.0
root@Ubuntu-15:/lib/firmware/ath10k/QCA6174/hw3.0#  ls -al
total 744
drwxr-xr-x 4 root root   4096 Jan 13 07:41 .
drwxr-xr-x 4 root root   4096 Jan 13 07:39 ..
-rw-r--r-- 1 root root   8124 Jan 13 07:38 board.bin
lrwxrwxrwx 1 root root     11 Jan 13 07:41 board-pci-168c:003e:144d:412f.bin
-> ./board.bin
-rw-r--r-- 1 root root 733784 Jan 13 07:39 firmware-4.bin
lrwxrwxrwx 1 root root     16 Jan 13 07:40 firmware-5.bin ->
./firmware-4.bin

Directory structure when I tried kvalo's firmware:

root@Ubuntu-15:/lib/firmware/ath10k/QCA6174/hw3.0#  pwd
/lib/firmware/ath10k/QCA6174/hw3.0
root@Ubuntu-15:/lib/firmware/ath10k/QCA6174/hw3.0/new#  ls -al
total 844
drwxr-xr-x 2 root root   4096 Jan 13 07:31 .
drwxr-xr-x 4 root root   4096 Jan 13 07:41 ..
(quoted diff) +0 -2
-rw-r--r-- 1 root root  24692 Jan 13 07:17 board-2.bin
-rw-r--r-- 1 root root   8124 Jan 13 07:17 board.bin

lrwxrwxrwx 1 root root 11 Jan 13 07:17 board-pci-168c:003e:144d:412f.bin
-> ./board.bin
-rw-r--r-- 1 root root 733784 Jan 13 07:17
firmware-4.bin_WLAN.RM.2.0-00180-QCARMSWPZ-1
lrwxrwxrwx 1 root root 44 Jan 13 07:18 firmware-5.bin ->
firmware-4.bin_WLAN.RM.2.0-00180-QCARMSWPZ-1
-rw-r--r-- 1 root root 79801 Jan 13 07:17
notice.txt_WLAN.RM.2.0-00180-QCARMSWPZ-1

Here is the relevant part of my dmesg log:

jdetter@Ubuntu-15:~$ dmesg | grep ath10
[    6.789911] ath10k_pci 0000:3b:00.0: enabling device (0000 -> 0002)
[    6.791752] ath10k_pci 0000:3b:00.0: pci irq msi-x interrupts 8 irq_mode
0 reset_mode 0
[    7.009504] ath10k_pci 0000:3b:00.0: Direct firmware load for
ath10k/cal-pci-0000:3b:00.0.bin failed with error -2
[    9.145690] ath10k_pci 0000:3b:00.0: qca6174 hw3.2 (0x05030000,
0x00340aff, 168c:003e:144d:412f) fw WLAN.RM.2.0-00180-QCARMSWPZ-1 api 5 htt
3.26 wmi 4 cal otp max_sta 32
[    9.145694] ath10k_pci 0000:3b:00.0: debug 0 debugfs 1 tracing 1 dfs 0
Quoted 8 lines
testmode 0
[   10.144947] ath10k_pci 0000:3b:00.0: suspend timed out - target pause
event never came
[   13.219455] ath10k_pci 0000:3b:00.0 wlp59s0: renamed from wlan0
[   18.479782] ath10k_pci 0000:3b:00.0: failed to enable dynamic BW: -11
[   21.479376] ath10k_pci 0000:3b:00.0: could not suspend target (-11)
[   29.770121] ath10k_pci 0000:3b:00.0: failed to enable dynamic BW: -11
[   32.769665] ath10k_pci 0000:3b:00.0: could not suspend target (-11)

Firmware command timeouts (-11) suggest that wrong board file was used to boot the device.

The currently available board-2.bin doesn't seem to include your device (168c:003e:144d:412f). You can list them with:

; strings board-2.bin | grep vendor bus=pci,vendor=168c,device=003e,subsystem-vendor=168c,subsystem-device=3361m bus=pci,vendor=168c,device=003e,subsystem-vendor=168c,subsystem-device=3362m bus=pci,vendor=168c,device=003e,subsystem-vendor=168c,subsystem-device=3363m

Was this run on 4.4 or 4.2?

The board-2.bin support was added in 4.4. Prior to this the driver would try to load the board-pci-xxx. files. You can:
a) scream louder and complain to your card vendor and/or qualcomm
b) use pre-4.4 kernel, get windows driver, extract .inf and eeprom
files from it, look for the one that matches your device (168c:003e:144d:412f) and use it as board-pci-168c:003e:144d:412f.bin

Quoted 1 line

Michal

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k

#3 lore raw
Quoted 6 lines · John Detter

Michal,

Thanks for the speedy response! The dmesg, lspci and lshw outputs were generated when running 4.2.0, I didn't know you needed 4.4 in order for it to use board-2.bin. Even if I upgraded back to 4.4 the firmware still wouldn't work right?

Correct. The main problem at hand is incorrect board data which is used to (simply saying) configure/initialize the device.

You may still want 4.4 though. It may contain fixes for other problems that you still haven't reached to.

Michał

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k

#4 lore raw
In reply to John Detter

I have a very similar issue here, with a new Lenovo IdeaPad I bought 3 weeks ago...
It is really annoying to use a usb wireless that cannot hold internet conection for 5 minutes and then having to plug and unplug it again. After 15 years using GNU/Linux and now thinking in going back to Windows because of this unsolved issue I have also tried to solve this issue with backports, Kvalo, Compiling a new kernel, copying firmware to /lib/firmware/ath10k folders and so on and nothing has worked.
When I compiled the driver, it claimed QCA9377, and I copied this folder to /lib/firmware/ath10k. The firmware worked, but the board.bin did not work and until now I did not solve the issue :(

lspci

02:00.0 Network controller: Qualcomm Atheros Device 0042 (rev 30)

lshw
*-network UNCLAIMED
description: Network controller
product: Qualcomm Atheros
vendor: Qualcomm Atheros physical id: 0
bus info: pci@0000:02:00.0
version: 30
width: 64 bits
clock: 33MHz
capabilities: bus_master cap_list
configuration: latency=0
resources: memory:a1000000-a11fffff

Quoted 92 lines · John Detter

Hello everyone,

I recently bought a laptop (Samsung) that has a Qualcomm Atheros QCA6174 card. I have tried using the firmware from both kvalo's repo and the official linux-firmware repo and neither of them have worked. I am running a fresh Ubuntu 15.10 installation (Linux 4.2.0). I have also tried installing Ubuntu Gnome 15.10 with the mainline kernel build (Linux 4.4.0) and that didn't work either. The laptop I'm using does have a button on the keyboard to enable/disable the wifi and I'm not sure if it's causing an issue or not. I have checked rfkill list and there is neither a hard nor soft block on the wlan. I'm not really sure where to go from here, any help would be much appreciated!

Thanks for your time,

- John

Directory structure when I tried firmware from linux-firmware:

root@Ubuntu-15:/lib/firmware/ath10k/QCA6174/hw3.0# pwd
/lib/firmware/ath10k/QCA6174/hw3.0
root@Ubuntu-15:/lib/firmware/ath10k/QCA6174/hw3.0# ls -al
total 744
drwxr-xr-x 4 root root   4096 Jan 13 07:41 .
drwxr-xr-x 4 root root   4096 Jan 13 07:39 ..
-rw-r--r-- 1 root root   8124 Jan 13 07:38 board.bin
lrwxrwxrwx 1 root root     11 Jan 13 07:41 board-pci-168c:003e:144d:412f.bin -> ./board.bin
-rw-r--r-- 1 root root 733784 Jan 13 07:39 firmware-4.bin
lrwxrwxrwx 1 root root     16 Jan 13 07:40 firmware-5.bin -> ./firmware-4.bin

Directory structure when I tried kvalo's firmware:

root@Ubuntu-15:/lib/firmware/ath10k/QCA6174/hw3.0# pwd
/lib/firmware/ath10k/QCA6174/hw3.0
root@Ubuntu-15:/lib/firmware/ath10k/QCA6174/hw3.0/new# ls -al
total 844
drwxr-xr-x 2 root root   4096 Jan 13 07:31 .
drwxr-xr-x 4 root root   4096 Jan 13 07:41 ..
(quoted diff) +0 -2
-rw-r--r-- 1 root root  24692 Jan 13 07:17 board-2.bin
-rw-r--r-- 1 root root   8124 Jan 13 07:17 board.bin

lrwxrwxrwx 1 root root 11 Jan 13 07:17 board-pci-168c:003e:144d:412f.bin -> ./board.bin
-rw-r--r-- 1 root root 733784 Jan 13 07:17
firmware-4.bin_WLAN.RM.2.0-00180-QCARMSWPZ-1
lrwxrwxrwx 1 root root 44 Jan 13 07:18 firmware-5.bin -> firmware-4.bin_WLAN.RM.2.0-00180-QCARMSWPZ-1
-rw-r--r-- 1 root root 79801 Jan 13 07:17
notice.txt_WLAN.RM.2.0-00180-QCARMSWPZ-1

Here is the relevant part of my dmesg log:

jdetter@Ubuntu-15:~$ dmesg | grep ath10
[    6.789911] ath10k_pci 0000:3b:00.0: enabling device (0000 -> 0002)
[    6.791752] ath10k_pci 0000:3b:00.0: pci irq msi-x interrupts 8 irq_mode 0 reset_mode 0
[    7.009504] ath10k_pci 0000:3b:00.0: Direct firmware load for ath10k/cal-pci-0000:3b:00.0.bin failed with error -2
[    9.145690] ath10k_pci 0000:3b:00.0: qca6174 hw3.2 (0x05030000, 0x00340aff, 168c:003e:144d:412f) fw WLAN.RM.2.0-00180-QCARMSWPZ-1 api 5 htt 3.26 wmi 4 cal otp max_sta 32
[    9.145694] ath10k_pci 0000:3b:00.0: debug 0 debugfs 1 tracing 1 dfs 0 testmode 0
[   10.144947] ath10k_pci 0000:3b:00.0: suspend timed out - target pause event never came
[   13.219455] ath10k_pci 0000:3b:00.0 wlp59s0: renamed from wlan0
[   18.479782] ath10k_pci 0000:3b:00.0: failed to enable dynamic BW: -11
[   21.479376] ath10k_pci 0000:3b:00.0: could not suspend target (-11)
[   29.770121] ath10k_pci 0000:3b:00.0: failed to enable dynamic BW: -11
[   32.769665] ath10k_pci 0000:3b:00.0: could not suspend target (-11)

Here is my lspci and lshw output:

jdetter@Ubuntu-15:~$ lspci | grep QCA
3b:00.0 Network controller: Qualcomm Atheros QCA6174 802.11ac Wireless Network Adapter (rev 32)
root@Ubuntu-15:~# lshw
...
        *-pci:2
             description: PCI bridge
             product: Sunrise Point-H PCI Express Root Port #9
             vendor: Intel Corporation
             physical id: 1d
             bus info: pci@0000:00:1d.0
             version: f1
             width: 32 bits
             clock: 33MHz
             capabilities: pci pciexpress msi pm normal_decode 
bus_master cap_list
             configuration: driver=pcieport
             resources: irq:16 memory:ed200000-ed3fffff
           *-network DISABLED
                description: Wireless interface
                product: QCA6174 802.11ac Wireless Network Adapter
                vendor: Qualcomm Atheros
                physical id: 0
                bus info: pci@0000:3b:00.0
                logical name: wlp59s0
                version: 32
                serial: b8:86:87:c7:2d:a9
                width: 64 bits
                clock: 33MHz
                capabilities: pm msi pciexpress bus_master cap_list 
ethernet physical wireless
                configuration: broadcast=yes driver=ath10k_pci 
driverversion=4.2.0-23-generic firmware=WLAN.RM.2.0-00180-QCARMSWPZ-1 latency=0 link=no multicast=yes wireless=IEEE 802.11abgn
                resources: irq:319 memory:ed200000-ed3fffff
...
Quoted 4 lines

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k